Hydro-Oleophobic Property of Butterfly Wing Surface and Biomimetic Fabrication of Hydrophobic Silver Film / Gang Sun; Yan Fang |
Inadhesion Property of Aluminum Surfaces with Bionic Morphology / Jing Li; Qiang Li; Feng Du; Wei Zhang; Chun Min Shang |
Influence of Reaction Temperature on the Densification Behavior of the SiC/B4C Composites / Yun Long Zhang; Yu Min Zhang; Cheng Hai Li; Jin Ping Li |
Mechanical Properties of the Ecological Filling Blocks of the New Composite Wall Based on the Unified Strength Theory / Wei Huang; Ting Zhang |
Process Optimization and Characterizations of Enzyme-Extracted and Acid-Extracted Collagen from Scale of Bighead Carp / Min Li; Liu Meng Chen; Bo Quan Jiang |
Research on Shrinking Performance of Recycled Asphalt Pavement Material Stabilized with Inorganic Binder / Bo Peng; Wen Ying Li; Guang Kai Yin; Zhi Hao Cheng |
Simulation Study on Aluminium Alloy 7075-T6 Welding Based on ANSYS Software / Kai Dong |
Synthesis and Characterization of Supported on Silica Based Ionic Liquids / Li Ying Guo; Jun Shi; Jun Hai He; Ji Yue Huang; Peng Cheng Huang |
Synthesis and Dielectric Properties of PPy/TiO2 Composite / Hai Tao Zhao; Rui Ping Liu; Qiao Wang; Kai Xin Yang |
The Preparation of NiO/BiVO4 Composite Photocatalyst and its Enhanced Photocatalytic Activities / Pei Pei Yi; Xiang Zhai; Xiao Ming Gao; Feng Fu |
Thermal Aging Behavior of Ethylene Propylene Diene Monomer (EPDM) Rubber / Jie Liu; Bin Wang; Lun Wu Zhang; Lei Zhu; Tian Yuan Luo |
Thick Nickel Coating on Surface of Quartz Optical Fiber by Electrochemical Deposition Method / Xin Dong Mei; Bo Quan Jiang |
Enzymatic Reaction Kinetics of Papain-Extracted Collagen from Bighead Carp Scales |
Electrochemical Preparation and Application of PEDOT/Ferrocene Modified Electrode / Xin Fei Zhou; Yan Hui Song; Kun Yun He; Hai Tao Zheng; Shinichiro Suye |
Experimental Study on Milling Formation and Milling Force in Green Machining Ti6Al4V / Hui Wang; Fu Sheng Ni; Xiu Lin Ji |
Experimental Study on the Loaded Property of Waste Fiber Recycled Concrete Beam-Column Joints / Jing Hai Zhou; Yun Cong Shu; Shu Jun Bai |
Process Optimization and Characterization of Copper Oxide/Zeolite for Heterogeneous Catalytic Wet Oxidation of Dyeing Wastewater / Ting Liu; Bo Quan Jiang |
Structural, Electronic and Optical Properties of S-Doped Anatase TiO2 / Wei Zeng; Qi Jun Liu; Zheng Tang Liu |
The Study of a New Type of Cast Iron Material Used in the Glass Mould / Jian Kong; Lin Che |
Process Modeling of CuO/Zeolite Preparation for CODCr Removal from Acid Bright Red GR Wastewater |
An Elasto-Plastic Constitutive Model for Unidirectional Fiber Reinforced Metal Matrix Composites / Lei Yang; Wen Huang |
Experimental Research on Nano Infrared Smoke Material / Geng Ran Liu; Xing Gao Zhang; Pu Chun Mi |
The Modified Maximum Shear Stress Failure Theory of Ductile Material / Wen Lih Chen; King Leung Wong; Yu Feng Chang |
Characterization on the Precipitates in the Ti-Ni-Al-Zr Alloy during Heat Treatment / Li Yuan Sheng; Fang Yang; Ting Fei Xi |
Linear Static Analysis of Composite Hat Stiffener Based on ANSYS / Hong Yuan Li; Li Xu; Lei Mei; Da Zheng Wang |
Microstructure Characterization and Mechanical Properties of a Zn and Rare Earth Modified Mg Alloy |
Research on the Material Differences of 7050-T7451 Aluminum Alloy / Wei Han Wang; Wei Fang Zhang; Wei Zhang; Jin Song Yang |
Study on Esterifying Conditions of Shrinkage Reducing Monomer / Shi Tang; Lei Zhang |
Application of Biological Contact Oxidation Process of Sewage Treatment in a Hospital Study / Lei Sun |
Effect of Mg-30%La Modification on the Microstructure of Al-7Si Alloy / Dong Song Yin; Zhong Kai Zhang; Yu Chen; Zheng Ling Wang; Chun Yu Zhang; Chun Yang Wang; Yu Cheng Yu; Yong Liang An; Zhou Li; Qian Tao Pang; Qing Shan Li; Rui Chen |
Effects of the Repetition Number on Static and Dynamic Magnetic Properties of Metal/Native Oxide Multilayer Films / Hua Ping Zuo; Shi Hui Ge; Min Xu; Chun Hua Wu |
Research of Fire Behavior and Toxicity of the Typical Building Decoration Materials / Yan Fei Chen; Shuang Zhuang; Liang Yang |
Experimental Research on the Conductive Property of MWCNT Nanopaper / A Ying Zhang |
Preparation of High Security N-Octadecane MicroPCMs by In Situ Polymerization / Xiao Qiu Song; Yu Ping Duan; Yue Xia Li |
A Monte Carlo Method for Simulating Drying Temperature of the Gas-Sensing Material Based on Polyacrylonitrile / Tatiana Semenistaya; Nina K. Plugotarenko; Viktor Petrov |
Paper: An Emerging Green Furniture Material / Ming Gang Wang; Yue Tian |
Application of Modified Nano TiO2 in the Binder of Artificial Marble / Min Yang; Ling Pan; Zhi Qiang Fan |
Combined Strengthening-Toughening Technology of High Property Titanium Alloys for Aviation Uses in China / Zhi Shou Zhu; Xin Nan Wang; Guo Qiang Shang; Yue Fei; Han Qing Yu |
Comparison of the Capacity of Chitosan and Iron Hydroxide Flocs for Phosphate Adsorption in Seawater / Kai Li Chen; Wei Jin; Xin He |
Compressive Strength of Ground Waste Seashells in Cement Mortars for Masonry and Plastering / Chin Peow Woon; Poi Ngian Shek; Mahmood Md Tahir; Ahmad Beng Hong Kueh |
Distribution and Optimization of Residual Stress Fields in Titanium Simulated Blade Treated by Laser Shock Peening / Si Hai Luo; Wei Feng He; Xiang Fan Nie; Guang Yu He; Yang Jiao |
Effect of Static Magnetic Field on the Main Textures Development of Grain-Oriented Silicon Steel in the Primary Recrystallization / Zheng Lu; Li Juan Li; Qi Jie Zhai |
Effects of K Factor on the Length of Aircraft Sheetmetal Material Preparation under Unfolding State / Kai Zong; Shuang Shuang Zhang; Lu Zhang |
Evaluate Planar Feature with a Material Condition Using Convex Hull / Chong Ying Guo; Jian Hua Liu; Ke Jiang; Hai Bo Liu |
Finite Element Analysis of Residual Stress/Strain for Composite Material Part with Zinced Sheet/TPO during Forming Process / Liang Bo Ji; Qin Xiang Xia |
Furniture of Environmental Protection Materials |
Influence of EDTA-2Na Concertration on the Microstructure and Corrosion Behaviors of Mg-Al-Y Alloy / Yun Long Zhang; Mu Qin Li; Ping Liao; Yu Min Zhang |
Investigation of Micro Holes Fabricated by Femtosecond Laser on S136 / Lei Zhang; Xiao Wen Cao; Deng Peng Huang; Dong Wei Ran; Shuo Tian; Hui Chao Sun |
Laser Arc Hybrid Welding Properties of ZL114 Aluminum Alloy |
Microwave Assisted Self-Propagating High-Temperature Synthesis for Joining SiC Ceramics and SiC/SiC Composites by Ni-Al System / Shao Hua Han; Roberto Rosa; Valentina Casalegno; Milena Salvo; Paolo Veronesi; Monica Ferraris; Cristina Leonelli |
pH-Sensitive Materials with Controllable pH Phase Transition Value / Wei He; Xiao Nan Huang |
Preparation and Properties of Edible Packaging Film Based on Potato Starch / Xin Lin Zhang; Shi Yong Luo; Wen Yu Zhang; Wen Cai Xu |
Preparation and Study of Polyvinyl Alcohol Fiber / Ai Rong Chang |
Research on Cored Wire Re-Sulfurization Injection for Compacted Graphite Cast Iron / Yu Shuang Feng; Ze Sheng Ji; He Sheng Wu |
Research on the Process in MIG Welding of 5A02 Aluminum Alloy Plate / De Ping Jiang; Zong Xiang Yao; Zheng Cao |
Research on Ultra-Weak Bioluminescence Detection and Features for Freshness of Corn / Hong Sheng Hu; Qun Feng Niu; Bo Yuan Cui |
Study on 6H-SiC Crystal Substrate (0001) C Surface in FA-CMP Based on Diamond Particle / Zhu Qing Zhang; Kang Lin Xing |
Study on Middle Annealing Process of Cu-Ag Alloy Applied to Motor Commuter / Lijun Peng; Zhen Yang; Ji Miao Ma; He Feng Yuan; Feng Liu; Dong Ya Wang |
Study on Middle Annealing Process of HSn88-1 Alloy / Guo Jie Huang; Jimiao Ma; Yang Zhao; Dong Ya Wang; Lijun Peng |
Study on the Effects of Molar Ratio of MgO and MgCl2 on the Properties of Magnesium Cement Straw Board Based on Experiment / Xian Li Wang; Chun Yang Zhang |
Study on the Tensile Properties of Glass Fiber Reinforced Poly Cyclic Butylene Terephthalate Composites under and after High Temperature / Lu Zhang; Zhen Qing Wang; Ji Feng Zhang; Li Min Zhou |
The Fabrication of Co-Continuous SiC/P20 Steel Composites / Yun Long Zhang; Yu Min Zhang; Jin Ping Li; Ming Hu |
The Finite Element Analysis of Waste Fiber Recycled Concrete Column Compression Performance / Jing Hai Zhou; Qing Zhe Lin; Yun Cong Shu |
The Relationship between Superhydrophobicity, Self-Cleaning Performance and Microstructure of Butterfly Wing |
The Research of LEDs with Metal Substrates / Hai Kuang; Shi An He; Meng Xu |
The Structural and Optical Properties of Al Doped ZnO Thin Film / Ping Cao; Yue Bai; Zhi Qu |
Transparent and Light-Emitting Epoxy Nanocomposites Filled with Dodecylamine-Capped CdSe Quantum Dots / Ling Ling Chen |
Oxidation Behavior Research of the SiC/B4C Multiphase Ceramics / Yun Long Zhang; Xiao Gang Song; Guo Jing Li; Yu Min Zhang |
Influence of Material and Constitutive Models on Friction Analysis for Modelling in Machining Cellular Metal Structures / Rafael Guerra Silva; Uwe Teicher; Andreas Nestler; Alexander Brosius |
Effects of Continuous Casting Mould Vibration Feeding Strip on the Slab Structure / Lin Hui Yu; Ji Dong Li; Anthony Shevchenko; Ming Gang Shen; Bao Guo Zhang; Yi Yong Wang |
The Effect of the Different Constraint Degree on the Temperature Stress and Strain of Concrete / Xue Feng Song; Zhi Hong Fan; Chao Li; Bao Lan Zhang |
The Study on Theoretical Prediction Method of Corrosion-Induced Cracking of the Concrete Cover / Chun Ling Qi; Xian Li Wang; Yan Yu Meng; Yu Xia Zhong |
Effect of PP-g-MAH on Properties of ABS/PP Blends / Hai Ling Li; Lai Xiang Zhang; Xiao Ling Ding |
Effect of Thermal Aging on Mechanical Properties of EPDM Rubber / Jie Liu; Lun Wu Zhang; Bin Wang; Ze Qi Xu; Wan Wang |
Effects of Heat Treatment Process on Mechanical Properties of X70 Grade Pipeline Steel Bends / Shi Lu Zhao; Zhen Zhang; Lian Chong Qu; Jun Zhang; Jian Ming Wang; Shuang Hong Wang |
Magnetic Grinding Technology in Precision Machining of the Cam Surface / Zhi Qiang Wei; Feng Gao |
Mechanical and Electrical Properties of TiN with Stacking Fault: A DFT Study / Guo Xun Wu; Zhen Qing Wang; Chen Liang Li; Chao Ying Wang; Yong Yang; Bao Lai Wang |
Numerical Simulation of Metal Cutting Process Based on ANSYS/LS-DYNA / Song Jie Yu; Di Di Wang; Xin Chen |
Optimization of Cutting Parameters for Face Milling of Cast Iron by Reducing Specific Cutting Energy and Machined Surface Roughness / Melissa Schlüter; Henrique Butzlaff Hübner; André João de Souza |
Time Interval and Chilling Effects on it during the Forming Process Surfacing Deposition Forming / Jian Liu; Xiao Ming Xu; Sheng Zhu; Fan Jun Meng; Feng Liang Yin |
Study on the Anti-Stripping Properties of Dry Rubber Modified Asphalt Mixture / Bo Peng; Wen Ying Li; Wei Gong; Guang Kai Yin |
A Prediction Model of Surface Roughness in Micro End Milling / Mei Xia Yuan; Xi Bin Wang; Li Jiao; Yan Li |
Numerical Simulation of Dynamic Process under Low Pressure Casting Based on Two Phase Flow / Shan Guang Liu; Fu Yang Cao; Xin Yi Zhao; Yan Dong Jia; Zhi Liang Ning; Jian Fei Sun |
Preparation and Pavement Performance of Colored Asphalt / Xin De Tang; Chao Kong; Jiang Tian; Ying Li; Zheng Tong Jin; Hui Yang Bai |
Research of the Particle Gradation Technology of Components in PBX Explosive Based on CPM Model / Qiu An Huang; Geng Guang Xu; Jian Yu Chen |
Design of Injection Mould for the Mouse Shell with Two-Step Parting Mechanism / Hui Li; Tian Tian Yin |
Extrusion Swelling on the Co-Extrusion Process of Variable-Burning Rate Propellant by Numerical Simulation / Jun Chai; Zhong Liang Ma |
Finite Element Analysis and Experiment Study on the Lorry Crane Telescopic Arm / Xiao Ping Li; Jian Biao Zheng; Jian Guo Yun |
Industrial Design Evaluation of Coal Mine Machinery Based on Fuzzy AHP / Yu Rong Liu; Ming Rui Hao |
Research on Carbon Deposition Based on Remanufacture Cleaning / Yao Shuai Shuai; Xiu Jie Jia; Xing Wang; Wen Han Xu; Yi Fan Wang; Fa Shuang Li |
Research on the Near-Net Forging Processes for the Body of Overrunning Clutch / Tai Bin Wu |
The Experimental Study on "Soft Start" of Mine Permanent Magnet Coupling / Gui Juan Wang |
Experimental Study on Force of Stinger Cutter Breaking Rock / Yuan Xiu Sun; De Yong Zou |
Method about Innovation Design Based on the Function Clipping and Principle of Patent around / Hui Li; Huan Gao Zhang; Li Meng Liu; Run Hua Tan |
Research Flexural Properties of Prestressed Slabs / Xian Hong Meng; Lin Tong |
The Preliminary Exploration to Design Rules of W-Type Metallic Sealing Ring / Xiang Yu Ding |
Design of Work-Piece Rapid Handling Device / Zhi Dong Song |
Extreme Research on the Order Motion of the Hoisting Two-Stage Hydraulic Cylinder / Cheng Liang Li; Ming Su; Zhi Ping Xie |
Co-Simulation on Walking Hydraulic System of Tandem Roller Based on AMEsim and ADAMS / Jia Qing Li; Dong Xie; Zhong Xu Feng |
Industrial Design of Coal Mine Special Vehicle / Zhi Geng Liu; Yu Rong Liu |
Movement Analysis for the Picking Mechanism of the Opposite-Two-Rows Type Cotton-Picker / Qi Li; Jun Ting Yuan; Qiu Hong Song |
The Transmission Design of the Seven-Speed Planetary-Gear AT Based on the Lever Method / Yi Fan |
A Study on the Heat Transfer in Shell and Tube Heat Exchanger with Various Baffle Types / Jae Hoon Lee; Si Pom Kim; Seong Jun Kim |
Capillary Filling of Ferrofluid in Homogeneous Hydrophilic PDMS Microchannels / Ju Nan Kuo; Bo Zhi Yang |
Characteristic Analysis in Combustion Process of Marine Dual Fuel Engine / Ping Qu; Hong Liang Yu; Feng Bo Zhang; Wen Juan Zhao; Feng Li; Jia Lin Wan |
Crash Simulation of New Car Rear Under-Run Protector / Zhang Hong Li; Wei Gao Qiao |
Design and Research of Emergency Transport Security Decision Support System / Hong Ying Li |
Design of Push Frame and its Machining Fixture / Bing Chang Liu |
Design on Book Sorting Device Based on the TRIZ Theory / Ming Xia Kang; Ming Hai Yuan; Shu Yang Yan; Ya Zhou Liu |
Drill Jig Design of Separator Slide Valve Index Hole / Jian Fu Sun |
Factor Analysis and Regression of the Air Source Heat Pump Water Heater Energy Efficiency Coefficient / Hua Ming Yu |
Finite Element Simulation and Experiment of Mechanical Expanding for Longitudinal Welded Pipe / Yun Feng Yao; Ying Gao; Jun Xia Li; Shuang Jie Zhang; Tao Han |
Physical Modeling for Motional Cable under Smooth Plane Constraint / Wang Tao Jin; Jian Hua Liu; Cheng Tong Tang; Jia Shun Liu |
Research on Vibration Characteristics of Barrel Considered Gas Pressure / Da Wei Zhu; Jie Zhou; Xue Ping Zhang |
Self-Propelled Corn Harvester Virtual Design / Zhe Ming |
Simulation Analysis of Stiffness and Strength of Lift Mechanism for Wire Bundling Machine / Qian Liu; Feng Hui Wang |
The Technology Study of Steel Belt Feeding Machine of Crystallizer of Continuous Casting / Lin Hui Yu; Ming Gang Shen; Ji Dong Li; Yi Yong Wang; Jian Ming Su; Chu Fei Han |
Wearable Device: Bless or Curse? / Jian Feng Hu |
The Creative Application of Halftone Technology / Hong Yuan Lei |
The Bionic Anti-Adhesion Study of the Clay on Caterpillar Surface / Jing Li; Feng Du; Hai Jiang; Qiang Li |
Exact Solution of Laminated Orthogonal Hyperbolic Shells of Thermoelastic with Four Simply Supported / Jian Hai Xue; Jia Yu Li |
The Structure Optimization Design for the W-Type Metallic Sealing Ring Based on the MOGA Algorithm |
Study on Losses Calculation and Design of DC Boost Chopper / Zhuo Zhang; Qin Ruo Wang; Cheng Zhang |
Dynamic Stability Analysis of Mountain Hollow Thin-Walled High Pier under Impact Load / Hong Tao Yang; Rui Li; Zhi Qiang Chen; Zhang Yue |
The Electrical Design and Research on Rooftop Photovoltaic System of Northeast Area Construction / Chun Lei Zhao; Tian Li; Yun Liang; Tuo Zhang |
The Use of LOLP Operation Design Method in Optimize the Design of Independent Photovoltaic System Based on PVsyst / Chun Lei Zhao; Tian Li; Yun Liang; Xu Zhang |
Influence Characteristics of Fluid Film Bearing's Displacement-Load on Rotating Vibration of Rotor System / Xi Chen Lin; Rui Ping Zhou; Neng Qi Xiao |
A Study on the Numerical Analysis of Main Valve for Emergency Escape Using Marine Craft CO2 System / Jae Hoon Lee; Si Pom Kim; Rock Won Jeon; Hyeok Woo Oh; Dong Ho Kang |
Follower Effect of Internal Pressure on Modal Analysis of a Space Inflatable Structure / Fei Liu; Wei Liang He |
Fatigue Loading Tests and Acceptance Criteria of Reinforced Pre-Stressed Concrete Railway Sleepers / Marcela KarmazÃnová |
The Effect of Attack Angle on the Performance of Wave Glider Wings / Bing Huan Zheng; Chun Ying Xu; Chao Ling Yao; Jia Wang Chen |
Review of Laser Ignition for Methane-Air Mixtures / Hong Tao Wang; Cang Su Xu |
Speed Perception under Foggy Weathers: Mechanism and Improvement / Bin Liu; Shun Ying Zhu; Hong Wang |
Study on the Production and Uses of Self Discharging Carriage / Zong Jing Huang |
A Method for Harvesting Energy Using Piezoelectric Transducers / Kshitij Chopra; Kritika Nigam; Sujata Pandey |
Remote Stepper Motor Controlled Based on Wi-Fi Module / Kan Liu; Song Lin Liu |
The Summary of the Inverter Used in PV System / You Jie Ma; Shuai Wang; Xue Song Zhou |
Research on a Denoising Method of the Force Sensor Signal Based on Multiple Filter / Xiao Jian Wu; Guo Kun Zuo; Zhong Zhu Yang; Shang Qing Xiao |
Analysis the Structural Parameters of Multi-Ring Groove MRF Damper Affecting on the Damping Properties / Jian Hai Xue; Shi Xing Zhu |
Application of a New Smith Fuzzy PID in Electric Boiler Temperature Control System / Qiang Gu; Feng Long Zheng; Bin Bin Liu; Wen Yan Yang |
A Correlation Model Based Failure Mode Analysis Method for Mechatronics Systems / Ying Liu; Zheng Hu; Shi Gang Zhang |
Design and Study of Electroplating Driving Control System Based on PLC / Gui Yan Li |
Research and Applications of Functional Pants Warmth Retention Structure and Temperature Control System / Hao Liu; Qing Chang Meng; Qing Zhang; Hao Ma |
Research on Three-Station Location Method for Nuclear Explosion Infrasound Detection / Xin Liang Pang; Ying Wang; Yan Ma; Xian You Cheng |
The Analysis and the Application of Tool Nose Round Radius Compensation Based on FANUC NC System / Zhi Xian Gao |
The Multiobjective Design Optimization of pMUT Hydrophone / Shun Hsyung Chang; Fu Tai Wang; Jiing Kae Wu; Sergey Shevtsov; Igor V. Zhilyaev; Maria S. Shevtsova |
Greenhouse Enviroment Monitoring System Based on Zigbee Technology / Hai Feng Li; Wei Rong Zhao |
The Design of Wearable Sub-Health Monitoring System / Hao Ma; Xiu Juan Fan; Xiao Yun Yin |
Adaptive Traffic Signal Control Based on Path Priority / Jian Wei Zhang; Guo Zhen Tan; Nan Ding; Ming Jian Liu |
A Derating Control Strategy Based on the Stator Temperature of PMSM / Yan Ling Cao; Ping Cao |
A Design of Output Power Adaptation Method for Ultrashort Wave Diathermy Apparatus / Yun Guang Wang; Xu Fan; Hai Ping Cheng; Xiao Chen Chong |
Adaptive Feedback Control of Stochastic Nonholonomic Systems with Uncertainties / Gui Ling Ju; Wei Hai Sun |
An Overview of Micro-Grid Control Strategy Research / You Jie Ma; Li Yang Yin; Xue Song Zhou |
Application of PLC Technology in Electrical Energy Protection System Design / Bing Li |
Automobile Sensor Technology Development and Application Research / Ji Liu |
Automotive Wire Control Steering Sensor Fault Detection Algorithm Research / Zhi Ping Liu |
Design and Implementation of PID Algorithm Based on PLC Closed Loop Control System / Zhi Wei Guo; Cong Quan Hu |
Design and Implementation of the Highway Traffic Safety Early Warning Information Service System / Sheng Rui Liu |
Design of Fuel Cell Monitoring and Control System Based on LabVIEW and CAN Bus Communication / Xu Tao Liu; Zhi Wen Wang; Dong Wei; Xiao Long Lai |
Development of Valve Controlled Microfluidics Based on STM32 Dual-Core ARM / Kan Liu; Yi Fang |
Energy Control and Optimization of Hybrid Load-Haul-Dump / Tian Xu Jin; Ya Ling Lu |
Intelligent Research about Automate Substation Primary Equipment / Wen Long Wang; Ning Ning Huo; Xue Lian Li |
Mobile Robot Path Tracking Based on Fuzzy Control / Ming Ming Bian; Jin Lan Zhang |
Modeling and Implementation of Automation Systems Applying Project Methodologies - Thermal Shrink Packaging Machine / Melissa Schlüter; Rafael Crespo Izquierdo; Betânia Vargas Oliveira Medina; Guilherme Cortelini da Rosa; Marcelo André Toso |
Modeling of High Power Water Resistor Speed Control System of Wound Rotor Induction Motor / Qi Yu Yang; Xia Zhang; Tian Rui Chen |
Research of Velocity Stability of Separate Meter in and Separate Meter out Control System for Over-Running Load / Zhong Yi Cao; Xin Ming Liu; Wan Rong Wu |
Research on Automobile Engine Failure Recognition Technology Based on Improved PSO-RVM Algorithm / Huan Jin |
Study of the Testing System for Roadheader Pump and Motor / Xin Zhang; Ji Long Zhao; Qing Liang Zeng |
Study on Application of Intelligent Adaptive Genetic Algorithm of Electric Vehicle Charging System Based on / Li Zhou |
Study on Electromagnetic Heating System of Heat Transfer Oil and Automatic Temperature Control Algorithm / Shun Wei Wu |
Study on Switch Mode of Bus Coupler Protection in 330kV Substation of Zambia / Zai Bao Xiong; Wei Lu; Xiao Hui Long; Xiao Chen |
The Design of Storage Box Control System Based on Fingerprint Identification / Fei Lao; Guo Xin Li |
Vehicle Height Control of Automotive Air Suspension System Using Fuzzy Neural Network Approach / Hong Yan Shan |
Advanced Ultrasonic Testing Technologies with Applications to Evaluation of Steel Bridge Welding - An Overview / Zhi Bin Lin; Fardad Azarmi; Qusay Al-Kaseasbeh; Mohsen Azimi; Fei Yan |
Detection of the Antibiotic TMP in the Water with HPLC-DAD / Xiao Na Ji; Dong Mei Wang; Zhi Min Ren; Hua Yang; Yan Bo Xiao; De Jun Bian |
Based on Rub a Drum of Four Axis Programming and Virtual Machining Optimization Research / Xuan Lin Ye |
Ultrasonic Phased Array 3D Imaging for the Steel Butt Weld Defects / Zhi Hao Liu; Chao Lu |
The Study and Application of the Nitrile Gloves' Production Line's Online Measurement / Jian Jun Cai; Jian Bing Han; Su Qin Qu |
Simulated Study for OOK Modulation in the Mud Pulse Telemetry / Bo Qin Xu; Zhu Jun Zhang; Jun Wei Hu |
Analysis of the Influence of Sea-Surface Reflection on Locating the Underwater Sound Source / Qi Wei He; Guo Liang Xu; Shao Chun Ding; Zhen Dai |
Circuit Design of Eyesight Protection Device which is Based on a Single Chip / Min Zhu |
Exploration into the Macro Programming of CNC Lathes Ellipses / Ming Yao Wang |
Study on the Performance of Pneumatic Planar Bending Flexible Joint with Different Boundary Conditions / Yun Wei Zhao; De Xu Geng; Xiao Min Liu; Guang Bin Wu; Hong Bo Liu |
Three-Dimensional Numerical Simulation of Immersion Diffraction Sound Field Characteristics for Low Thicknesses Pipe Ring Weld / Yue Fu; Chao Lu; Guo Chen; Chan Wang |
The Current Research on Distribution Automation System / You Jie Ma; De Xiang Wang; Xue Song Zhou |
Research on FCM Algorithm in the 3D Visualization System of Medical Images / Qi Hong; Gai Dong Han |
Research on Digital Controls of Piston Pumps Based on Compound Control Using Feed-Forward and Feedback Controls / Qing Liang Zeng; Bin Bin Liu; Xin Chao Wang; Qiang Gu |
IFMOD: Intuitionistic-Based Fuzzy Multi-Objective Decision in Multi-Agent System / Hui Ying Wang; Li Na Zhang |
Car Networking Micro Letter for Car Fuel Consumption Test of Significance, the Research Present Situation and Main Problems |
Based on LabNIEW Environment Auto Fault Detection Research of Virtual Test System |
Design of AD Controller Customized IP Core Based on FPGA / Xiang Sheng Huang |
Multi-Source Information Fusion Based on Kalman Filtering / Meng Meng Zhou; G.M. Gao; Hong Bo Yang |
A Blind Detection Method of Video Steganography Based on Feature Fusion / Wan Qing Wang; Deng Yin Zhang; Guang Shuai Shi |
Research of Fault Diagnosis Method Based on Improved Extreme Learning Machine / Wen Bo Na; Qing Feng Jiang; Zhi Wei Su |
Fault Diagnosis Simulation of a Space Propulsion System Based on Fuzzy Rule Set Neural Network Method / Min Chao Huang; Bao Yu Xing |
LRE Fault Detection and Isolation Based on Fuzzy Direction Neural Network |
The Intelligent Fault Diagnosis Based on Bayesian Network Inference Algorithm Solution / Hao Wang; Sha Sha |
The Current Research on Micro-Grid / You Jie Ma; Miao Yu; Xue Song Zhou |
The Research of Algorithm to Obtain High Precision of Angle Sensor / Gang He; Guo Wei Gao; Rong Hao |
Research Progress of Energy Management System for New Energy Vehicles / Shuai Shuai Lv; Qing Qing Chen; Xiang Chen; Hong Jun Ni |
Plant Electrical Signal De-Noising Based on the Lifting Wavelet Transform / Yu Shuang Li; Li Guo Tian; Jiang Lin Wei; Meng Li; Jiang Tao Zou |
The Design of System to Texture Feature Analysis Based on Gray Level Co-Occurrence Matrix / Li Yuan Liu; Xiu Juan Fan |
Mainly Talks about the Electronic Communication System Key Technology Analysis / Wei Zhao; Fang Yun Li |
Research on the Web Chinese Keywords Extraction Algorithm Based on the Improved TFIDF / Cui Yuan Yu; Jie Shan |
Research on Wireless Resource Management |
Data Collection and Processing of Cloud Security Botnet Protection System / Lei Sun; Ji Ling Tang; Qin Sheng Du |
The Design of Communication Interface for Profibus-DP Slave Based on SPC3 / Guang Xiang Miao |
The Development and Design of Online Examination System Based on ASP.NET / Zhi Xue Li |
Cloud Security Threats Distribution Technology Research / Lei Sun; Qin Sheng Du; Lu Tan |
Information Network Service in the Rural City of Connotation Type Role in |
Android-Based Smart Access Control System for Open Laboratory / Kan Liu; Zhao Ai |
Cloud Computing Research Vehicle Traffic Information Service System Based on Network |
Data Center Protection Problems in the Zombie Network / Lei Sun; Wei Du; Na Che |
Design and Implementation of Error Simulator Based FPGA for Optical Data Link Transfer Test / Bin Wei Deng; Chong Han Liu |
Detecting Link Communities Based on Hadoop / Xue Yi Yang; Lan Huang; Kang Ping Wang |
Development Technology of Excel Data Server Application with DELPHI ADO + RemObjectcs Combined (Part 1: The Server Side) / Hai Zhong Yan |
Optimization and Management in Order to Drive Targeted Networking Memory Database |
Principal-Agent Activities on Small World Network / Min Li; Rui Qiu Ou; Yan Ling Song |
The Key Technologies for Classification of Distributed Data Streams / Hua Fen Xu; Jing Wu; Guo Jun Mao |
A Study on the Pros and Cons of Automatic Speech Translation - On the Speech to Speech Translation System Latest Achieved by Microsoft / Jia Rong Liu |
Research and Development on 3D Simulation Training Evaluation System of Substation Based on Unity3D / Hao Zhong; Xu Chen; Wen Qian Shu; Xiao Dong Chen |
BP Neural Network Model Selection of Software Reliability Based on MATLAB / Shao Yun Song; Mao Luo; Hong Ming Zhou |
A Optimization Traffic Grooming Algorithm Based on Bidirectional SONET Ring Topology Network / Su Xia Cui |
Catalogers and Semantic Environment of RDA / Yu Peng Sun |
Development of Data Info Library Management System on the Basis of SharePoint Portal Server / Bing Zhang |
Schur Decomposition for Unitary Symmetric Matrix / Cheng Feng Xu |
Quantile Regression for Partially Linear Models with Missing Responses at Random / Pei Xin Zhao |