An Introduction to Lightweight, Energy Saving, Environment Friendly Magnesium Based Nanocomposites: Materials of Upcoming Generation / Manoj Gupta; W.L.E. Wong |
Comparison of Three-Parameter Weibull Statistical Analysis of the Flexural Strength of Dense and Porous Sintered Clay / M. Abubakar; Norhayati Ahmad |
Influence of Nano-Polyaniline Contents on Mechanical Properties of Crosslink Recycled Polypropylene Polyaniline / Muhamad Rasyidi Husin; Agus Arsad; Mohd Shaiful Zaidi Mad Desa; Mohd Faizal Abdul Rahman |
TGO Formation with NiCoCrAlYTa Bond Coat Deposition Using APS and HVOF Method / S. Mohd Zulkifli; Muhammad Azizi Mat Yajid; Mohd Hasbullah Idris; M. Daroonparvar; Halimaton Hamdan |
Alteration by Cerium Element on Primary and Eutectic Mg2Si Phases in Al-20%Mg2Si In Situ Composite / Nur Azmah Nordin; Saeed Farahany; Tuty Asma Abu Bakar; Esah Hamzah |
Oxidation of Pure Aluminium Granules during In Situ Melting / Aslinda Saleh; Mohd Hasbullah Idris |
Effect of Silver Nanoparticles in Silicalite-1 Zeolite on Antireflection and Antibacterial Performances / Hye Jin Bae; Bo Kyung Lee; Hae Ryul Ok; Byung Ho Choi |
Improvement of Hydrophilic Stability of Diamond-Like Carbon Films by O2/CF4 Plasma Post-Treatment / Chavin Jongwannasiri; Shuichi Watanabe |
An Improvement of Photoanode Performance for Enhanced Efficiency in Dye-Sensitized Solar Cell / Supphadate Sujinnapram; Sasimonton Moungsrijun |
Effect of Ingredient Loading on Vulcanization Characteristics of a Natural Rubber Compound / B. Pajarito |
Effect of Ingredient Loading on Water Transport Properties of a Vulcanized Natural Rubber Compound / Abhel Ananoria; B. Pajarito |
Effects of Electron Beam on Structure and Physical Properties of Natural Colorless Topaz / Chutharat Paikaew; Juthamas Inthanont; Adisak Punyanut; Ekachai Hoonnivathana; Pichet Limsuwan; Kittisakchai Naemchanthara |
Effect of Ingredient Loading on Surface Migration of Additives in a Surfactant-Loaded Natural Rubber Vulcanizate / Jimyl Arabit; B. Pajarito |
Characterisation of Moisture Absorption Effects on the Strength of Composite Materials / King Jye Wong; Haris Ahmad Israr; Mohd Nasir Tamin |
Modeling Interlaminar Shear Crack-Jump Phenomenon in Fiber-Reinforced Polymer Composites / S.S.R. Koloor; Majid R. Ayatollahi; M.N. Tamin |
Effect of the Gel Coat Composition on the Tensile Strength for Glass Fibre Reinforced Polyester Composites / Ahmad; M.R. Abdullah; Ab. Saman Abd Kadir |
UV LED Curing Formulation for Polyacrylamide Hydrogels / Nur Farizah Ayub; Shahrir Hashim; Jamarosliza Jamaluddin; Roshafima Rasit Ali; Nadia Adrus |
Mechanical Behavior Analysis of Apus Bamboo (Gygantochloa sp) Thin Plate Composite due to Adhesive Joint and Water Absorption Using Experimental and Finite Element Method / Achmad Ryan Mulyanto; Hendri Syamsudin; Djarot Widagdo |
Analysis of Bending Loads on Bamboo-Balsa and Bamboo-Polypropylene Honeycomb Composite Sandwiches / Aldyandra Hami Seno; Eko Koswara; Hendri Syamsudin; Djarot Widagdo |
Numerical and Experimental Analysis of Flexural Properties of Bamboo Tali Laminate Composite / Raden Rubani Firly; Hendri Syamsudin; Muhammad Kusni; Djarot Widagdo |
Studies on Effect of Zinc Oxide (ZnO) Nanostructures Morphology by Modification of Sol-Gel Solution / Ili Liyana Khairunnisa Kamardin; Ainuddin Ainun Rahmahwati |
Morphological Effect of Composite Coated SUS430 Steel during Thermal Oxidation Process / Raden Dadan Ramdan; Asep Ridwan Setiawan; Rochim Suratman |
Dry Sliding Wear Behavior of A356-ZrO2 Metal Matrix Composite / Hamidreza Ghandvar; Saeed Farahany; Mohd Hasbullah Idris; Mohammadreza Daroonparvar |
Interlaminar Damage Behavior of CFRP Composite Laminates under Cyclic Shear Loading Conditions / Muhammad A'imullah Abdullah; Mohammad Reza Arjmandi; Seyed Saeid Rahimian Koloor; King Jye Wong; Mohd Nasir Tamin |
Hydrothermal Synthesis Effect on Growth of Zinc Oxide Structure / Ainuddin Ainun Rahmahwati; Muhammad Firdaus Hashim; Ili Liyana Khairunnisa Kamardin |
Pulsed Current Electrodeposition of Mn-Cu Alloys on SUS 430 Substrate as Coating Material for SOFC Interconnect Application / Asep Ridwan Setiawan; Aditianto Ramelan; Rochim Suratman; Naufal Muhammad Herwandi |
A Study on the Effect of Binder Content for Pore Property of Fe Foam Using Slurry Coating Method / Jung Yeul Yun; Da Hee Park; Jei Pil Wang |
Investigation of Deposition Parameters Dependence on Sputtered Cu2ZnSnSe4 Thin Films Properties / Kyoo Ho Kim; Rachmat Adhi Wibowo; Nokeun Park; Fianti; Ersan Y. Muslih |
Solution-Processable Field-Effect Transistor Behavior of #960;-Conjugated Oligothiophene / Eun Hee Lim |
Parameter Design for Hardness of Metal Filled Epoxy Matrix / Mohd Tanwyn Mohd Khushairi; Safian Sharif; Jaafar Sidek Mohd Ani |
The Influence of Punch Angle on the Spring Back during V-Bending of Medium Carbon Steel / Muhammad Arsyad Suyuti; Rusdi Nur; Asmeati |
Interaction of Metal and Slag in Continuous Casting Mold / José Dimas Arruda; Alexandre Leopoldo Pereira; Carlos Antonio da Silva; Itavahn Alves da Silva; Varadarajan Seshadri |
Mathematical Modeling of Heat Losses in Steelmaking Ladles / Izabela Diniz Duarte; Carlos Antonio da Silva; Itavahn Alves da Silva; Eliana Rodrigues Ferreira; Varadarajan Seshadri |
Study of Heat Dissipation Generated in Tool Designed for Friction Stir Welding Process (FSW) / G. Paramo; A. Benitez |
Development of Aluminum Anodizing Process by the Power Supply Using Pulse Width Rectifying Method / Myung Jin Chung |
Thermal Response of Activated Charcoal Modified Investment Casting Moulds / Bashir Yahaya; E.M. Nazim; Mohd Hasbullah Idris; M.S. Dambatta; Mahmood Anwar; Sudin Izman |
A Study on Different Welding Processes of IN718 for Elevated Temperature Application / Kyung Ju Min; Jong Hoon Yoon; Joon Tae Yoo; Ho Sung Lee |
A Study on Post Weld Heat Treatment of Friction Stir Welded Al2195 Blank for Spin Forming / Jong Hoon Yoon; Joon Tae Yoo; Kyung Ju Min; Ho Sung Lee |
Mechanical Properties of Shielded Metal Arc Welded Low Carbon Steel: Effect of Butt Joint Type and Uncapping of Excess Weldment / Toto Triantoro Budi Wardoyo; S. Izman; Safian Sharif; Hosta Ardhyananta; Denni Kurniawan |
Effects of Salinity on Nanosilica Applications in Altering Limestone Rock Wettability for Enhanced Oil Recovery / Wan Rosli Wan Sulaiman; A.J. Adala; Radzuan Junin; Issham Ismail; Abdul Razak Ismail; Mariani Abdul Hamid; Mohd Johari Kamaruddin; Zaki Yamani Zakaria; Anwar Johari; Mimi Haryani Hassim; Tuan Amran Tuan Abdullah; Kamarizan Kidam |
The Effectiveness of Cationic and Polymer Inhibitors on Shale / Abdul Razak Ismail; Radzuan Junin; Issham Ismail; Mohd Fauzi Hamid |
Improved Coefficient of Friction Using Different Types of Lubricants in Drilling Operation / Abdul Razak Ismail; Muhammad Syafiq Ab Rashid; Nurul Jannah Ismail; Wan Rosli Wan Sulaiman; Mohd Zaidi Jaafar |
Cellulose Nanowhiskers Reinforced Green Nanocomposites: Some Recent Development / Azman Hassan; Reza Arjmandi; M.K. Mohamad Haafiz |
Mechanical and Thermal Properties of Rubber Toughened Poly(Lactic Acid) / Mohd Shaiful Zaidi Mad Desa; Azman Hassan; Agus Arsad; Nor Nisa Balqis Mohammad |
Mechanical Behavior of Composite Multilayered Basalt/E-Glass/Epoxy Pipe under Internal Pressure / Thamir Aunal Deen Mohammed Sheet Almula; Mohd Yazid Yahya; Amran Ayob; Iqbal Makhtar; Amran Alias |
Effect of Colorant on Tensile Strength and Carbonyl Index of Oxo-Biodegradable Low-Density Polyethylene Films during Thermal Aging / Reymark D. Maalihan; B. Pajarito |
Sorption Kinetics of Pro-Oxidant-Loaded PE Plastic Bags in Aqueous Media / Giselle Lou D. Leuterio; B. Pajarito |
Effect of Filter Aids on Pressure Drop and Permeability of Two Different Filter Media / Andenan Nurnadia; M. Rashid; S. Hajar; M.R. Ammar |
Novel Hydrophilic Chitosan and Sago Based Membranes for Pervaporation of Organic-Water Mixtures / Mohd Ghazali Mohd Nawawi; Zafifah Zamrud; Abdulhakim M. Alamaria |
Highly Response and Sensitive Copper Sensors Based on Chitosan Films / Ahmed Eljali; Irwana Nainggolan; Shahrir Hashim; Tulus Ikhsan Nasution |
Overview on Mechanical-Chemical Ionic Liquid Pretreatment Study on Bioethanol-Based Lignocellulosics Biomass / Nor Sharliza Mohd Safaai; Amizon Azizan; Maisarah Ramli; Siti Norsyarahah Che Kamarludin |
Characterization of Nanosilica of Tapioca Peel as Adsorbent for Biomethane Storage System / Hasnizah binti Habibun; Shareena Fairuz binti Abdul Manaf; Nur Hashimah Alias; Nur Shahidah Ab Aziz; Fazlena Hamzah |
Tensile and Morphological Properties of Hybrid Montmorillonite/Microcrystalline Cellulose Filled Polylactic Acid Composites: Effect of Filler Ratio / Reza Arjmandi; Azman Hassan; M.K. Mohamad Haafiz; Zainoha Zakaria |
Effects of Pre-Treatment Conditions on Black Tilapia Fish Scales for Gelatin Extraction / KANAGESWARY SOCKALINGAM; Maizlinda Izwana Idris; Hasan Zuhudi Abdullah |
Biopolymeric Adsorbent for the Removal of Methylene Blue: Characterizations, Equilibrium Isotherms and Kinetic Studies / Siti Aishah Muhmed; Mohd Ghazali Mohd Nawawi |
Effect of Solvent on Adhesion Property of Glass Fiber Recycled by Superheated Steam / Jian Shi; Li Min Bao; Kiyoshi Kemmochi |
Recycling Technique of Carbon Fiber Laminate Using Hydrolysis Near Critical Region / Byung Young Moon; Byeong Soo Kim |
Preparation of Cellulose Nanocrystal Aerogel from Wastepaper through Freeze-Drying Technique / Wan Hazman Danial; Zaiton Abdul Majid; Mohd Nazlan Mohd Muhid; Mohd Bakri Bakar; Zainab Ramli; Sugeng Triwahyono |
Effect of Fluidization Number on the Combustion of Empty Fruit Bunch in a Fluidized Bed / Anwar Johari; Tuan Amran Tuan Abdullah; Mimi Haryani Hassim; Kamarizan Kidam; Mohd Johari Kamaruddin; Zaki Yamani Zakaria; Wan Rosli Wan Sulaiman |
Determination of Volatile Organic Compounds (VOCs) at Selected Pump Stations in Skudai, Johor Bahru / Mimi H. Hassim; Norsyazwani Mohammad; Anwar Johari; Tuan Amran Tuan Abdullah; Kamarizan Kidam; Mohd Johari Kamaruddin; Zaki Yamani Zakaria; Wan Rosli Wan Sulaiman |
Carbon Dioxide Removal by Using Absorption Process with 5M Aqueous Solution of 2-(Methylamino)Ethanol / Kreangkrai Maneeintr; Pimon Iamareerat; Poomsup Manonukul; Suttichai Assabumrungrat; Tawatchai Charinpanitkul |
A Theoretical Performance of MR-DeDuster as a Fine Dust Emission Control System / N. Hasyimah; M. Rashid; H. Norelyza |
Particulate Emission from Biomass Fuel Combustion / J. Nor Ruwaida; M. Rashid; M.M. Syahirah |
An Investigation of Carbon Dioxide Sequestration on Amine-Modified Kenaf: Adsorption Isotherm Study / Nabilah Zaini; K.S.N. Kamarudin |
Compatibility Issue Related to the Use of Biodiesel with Automotive Materials / Narisa Sa'at; Ariffin Samsuri; Khaidzir Hamzah; Hanizam Sulaiman |
Microwave Assisted Pyrolysis of Rice Husk in the Presence of Eco Friendly Microwave Absorber in Producing Bio-Oil / K. Azduwin; Mohd Zafryl Zaheidy; Mohd Jamir Mohd Ridzuan; Anis Atikah Ahmad |
Cathodic Protection Effect of Reinforced Concrete Beam Specimens with Zinc Sacrificial Anode in Marine Environment / Jin A Jeong |
The Experimental Measurement on the Throwing Power of Sacrificial Anode Cathodic Protection for Concrete Piles in Natural Sea Water / Jin A Jeong; Chung Kuk Jin |
Assessment of the Elastic Stress of 304 Stainless Steel Using Half-Cell Potential Measurement / Saber Rashid; N. Islami; Ahmad Kamal Ariffin; M. Ridha; Syarizal Fonna |
Influence of Ion Irradiated Recycled Polyethylene on Physical Properties of Bituminous Binder / Perviz Ahmedzade; Alexander Fainleib; Taylan Günay; Olga Grigoryeva; Baurzhan Kultayev; Olga Starostenko |
Utilization of Variable Resistor for Improvement of Impressed Current Cathodic Protection System on Reinforced Concrete Structures |
Fresh Properties of Self-Compacting Concrete Integrating Coal Bottom Ash as a Replacement of Fine Aggregates / Ahmad Farhan Hamzah; Mohd Haziman Wan Ibrahim; Norwati Jamaluddin; Ramadhansyah Putra Jaya; Norul Ernida Zainal Abidin |
Effect of External Environment on the Properties of Selected Plasters / Dana Ko#328;áková; Monika #268;áchová; Eva Vejmelková; Pavel Reiterman; Robert #268;erný |
Determination of Salt Transport Properties of Sandstone: A Combined Experimental/Computational Approach / Zbysek PavlÃk; Milena PavlÃková; Robert #268;erný |
A Study on the Structural Analysis of Jacket Substructure Related to Offshore Wind Power Environment / Min Young Sun; Ki Yeol Lee; Byung Young Moon |
Surface Characterization of Biomimetic Hydroxyapatite-Silver Functionalized on Polydopamine Film / Syafiqah Saidin; Hendra Hermawan; Pascale Chevallier; Diego Mantovani |
Effect of Sintering Temperature on the Mechanical Properties of Nanostructured Ceria-Zirconia Prepared by Colloidal Process / Mohamed M. Aboras; Andanastuti Muchtar; Noor Faeizah Amat; Che Husna Azhari; Norziha Yahaya |
New Solvent System for the Fabrication of Polyvinyl Alcohol - Gelatin Nanofibers via Electrospinning / Jopeth Ramis; B. Pajarito |
Composite of Poly Lactid Co-Glycolic Acid (PLGA)-Collagen Coated by Chitosan as Candidate of Hollow Fiber Small Diameter Vascular Graft / Prihartini Widiyanti; Dita Ayu Mayasari; Zahrina Mardina; Riki Siswanto; Agresta Afianti Ifada; Ova Oktavina |
Investigation of Gamma Radiation on Hydroxyapatite Synthesized from Chicken Eggshell by ESR Spectroscopy / Kanokwan Boonsook; Weeranuch Kaewwiset; Ekachai Hoonnivathana; Pichet Limsuwan; Kittisakchai Naemchanthara |
Preparation and Characteristic of Hydroxyapatite Synthesized from Cuttlefish Bone by Precipitation Method / Kridsada Faksawat; Supphadate Sujinnapram; Pichet Limsuwan; Ekachai Hoonnivathana; Kittisakchai Naemchanthara |
The Effect of Silane on the Biomechanical Properties of PEEK/HA Composite / Ahmad Ramli Rashidi; Mat Uzir Wahit; M.R. Abdullah; Mohammed Rafiq Abdul Kadir |
Design of Above-Knee Prosthesis: A Finite Element Stress Analysis / Sandro Mihradi; Calvindoro Zeus Abdiwijaya; Tatacipta Dirgantara; Andi Isra Mahyuddin |
Porous Magnesium Scaffolds for Bone Implant Applications: A Review / Noor Jasmawati; Joy R.P. Djuansjah; Mohammed Rafiq Abdul Kadir; Irza Sukmana |
Effects of Alkaline Treatment on Corrosion Behavior of Biodegradable Magnesium / Mahtab Assadian; Mohd Hasbullah Idris; Mohammad Mahdi Taheri; Mostafa Rezazadeh Shirdar; Davood Almasi |
Effect of Heat Treatment on Surface Morphology of Titanium / Kwok Joon Tan; Sahkila Mahmod; M.A.A. Wahab; Maizlinda Izwana Idris; Hasan Zuhudi Abdullah |
Characterisation and In Vitro Bioactivity of UV-Treated Anodised Titanium / Te Chuan Lee; M.F.M. Rathi; M.Y.Z. Abidin; Hasan Zuhudi Abdullah; Maizlinda Izwana Idris |
Anodic Oxidation of Titanium in Acetic Acid for Biomedical Application / Mohamad Ali Selimin; Maizlinda Izwana Idris; Hasan Zuhudi Abdullah |
Effect of UV Light Treatment Condition on Apatite Formation of Anodised Titanium / Te Chuan Lee; Maizlinda Izwana Idris; Hasan Zuhudi Abdullah |
Effect of UV Wavelength on Apatite Formation of Anodised Titanium / Te Chuan Lee; Hasan Zuhudi Abdullah; Maizlinda Izwana Idris |
Analysis on Compressibility of Dental Amalgam Using Nanomaterial Zinc Oxide (ZnO) / Poppy Puspitasari; Andoko |
Effect of Calcination on the Properties of Hydroxyapatite from Tilapia Fish Bones / A.N.K.A. Fara; Ganeson Pragash; Hasan Zuhudi Abdullah |
Optimization and Characterization of Anatase Formed on Anodized Titanium in Sulfuric Acid / Saleh S. Saleh; Hasan Zuhudi Abdullah |
Electrophoretic Deposition of Hydroxyapatite Coatings on AZ31: The Effect of Nanoparticle Multiple Coating Approach / C.Y. Chong; Tuty Asma Abu Bakar; Nor Akmal Fadil; Rafaqat Hussain |
Effect of Processing Parameters and Heating Techniques on the Extraction Yield of Eurycoma longifolia (Tongkat Ali) / C.K. Foong; Mohd Johari Kamaruddin; Anwar Johari; Tuan Amran Tuan Abdullah; Mimi Haryani Hassim; Kamarizan Kidam; Z.Y. Zakaria; Wan Rosli Wan Sulaiman |
A Novel Approach of Using SMA Wires Actuated Stewart Platform for Continuous Passive Motion (CPM) of Ankle Rehabilitation Therapy / T. Nagarajan; S. Krishnan; A.M.A. Rani; Victor Amirtham; T.V.V.L.N. Rao; Winson Ambaraj; Ramanathan Ramiah |
Behaviour of Acrylonitrile Butadiene Styrene (ABS) during Dewaxing Process for Investment Casting of Proximal Humerus Implant / Soudeh Iranmanesh; Mohd Hasbullah Idris; Alireza Esmaeilzadeh |
Microstructure and Properties of Forged CoCrMo Alloy for Load Bearing Application / Fazira Suriani Mohamed Fadzil; M.H.A. Hamid; Ahmad Nizam bin Abdullah; Mazlan Mohamad; Yuichi Otsuka |
Condition Monitoring of a Gear-Box Using Wear Particle Analysis Technique / Sayed Y. Akl; Ahmed A. Abdel-Rehim |
Case Study on Reliability of Automotive Painting Shop Robots / Mohd Amin Abd Majid; Ahmad Fauzi Fudzin |
Design of a High Accuracy 3-Axis Coordinate Measuring Machine Working on the Shop Floor / Tran Anh Vo; T.H. Dung; Hyun Chul Kim |
Flutter Analysis of Functionally Graded Panel Based on Neutral Surface / Jung Hwan Kim; Ji Hwan Kim |
Effect of Refrigerant on the Exergy Loss and Performance in Air Conditioner Using Ejector as Expansion Device / Vina Serevina; K. Sumeru; Henry Nasution |
Sensor Based on the Resonance Frequency for Detecting Overfilling in a Pressing Apparatus / Anna Antonyová; Peter Antony |
A Review of Multiple Edge Detection in Road Lane Detection Using Improved Hough Transform / Muhamad Lazim Talib; Suzaimah Ramli |
Road Safety Outcome Model among Commercial Bus / A.Z. Abdul Kadir; Jafri Mohd Rohani; Matthew Oluwole Arowolo |
Modeling of Square Channel Reactor for Optimum Length Prediction / Piyanut Inbamrung; Phavanee Narataruksa; Sabaithip Tungkamani; Chaiwat Prapainainar; Thana Sornchamni |
Enhancing Air Conditioning Performance Using TiO2 Nanoparticles in Compressor Lubricant / K. Sumeru; Triaji P. Pramudantoro; Farid Nasir Ani; Henry Nasution |
Performance Comparison of Automotive Air Conditioner Using Various Refrigerants / Vina Serevina; K. Sumeru; Azhar Abdul Aziz; Henry Nasution |
A Study on Dynamic Motion and Wave Power in Multi-Connected Float-Counterweight Type of Wave Energy Converter / Kesayoshi Hadano; Pallav Koirala; Byung Young Moon |
Peristaltic Micropump with Multi-Electrodes Using Electrostatic Force / Seong Yun Jeong; Chan Seob Cho; Pyo Hwan Hong; Dong Su Lee; Bong Hwan Kim |
Dynamic Strength Analysis for Mooring Design of Ship / Byung Young Moon; Nak Kyung Choi; Jeong Young Han |
Improvement of Containment Spray Heat Exchanger in Structure Analysis / Dong Won Jung |
Bio-Mechanism Response of Mimosa Pudica against External Stimulation / Z.N. Ismarrubie; Han Lin Goh; S. Masuri; Hanafiah Yussof |
Analysis on the Degradation Characteristics of 2G High-Tc Superconducting Wires in Accordance with Electrical Breakdown Voltage / Hong Seok Lee; Jong O. Kang; On You Lee; Seung Min Bang; Junil Kim; Young Kyu Mo; Jong Gi Hong; Jae Hun Lee; Cheo Lyeong Jang; Hyoung Ku Kang |
Applying Game Theory to Competitive Production-Inventory Models with Vendor's Imperfect Production Processes and the Condition of Buyer's Exemption from Inspection / Liang Yuh Ouyang; Chih Te Yang; Adam Kao; Jing Zhi Huang |
Level of Learning from Occupational Safety Accidents: Current Status in Malaysia / Kamarizan Kidam; N.E. Hussin; N. Fatihah M. Fandi; Anwar Johari; T.A.T. Abdullah; Mimi Haryani Hassim; Mohd Johari Kamaruddin; Zaki Yamani Zakaria; Wan Rosli Wan Sulaiman |
Using AHP Multiple Criteria Decision Making Approach for Selecting a Type of Industrial Plant at Risk on Fire / Arroon Ketsakorn; W. Meethom |
A Survey Instrument Design to Determine the Success Factors in Implementing the End-of-Life Vehicles (ELVs) Management System in Malaysia / Tengku Nur Azila Raja Mamat; Muhamad Zameri Mat Saman; Safian Sharif |
Safety Assessment Model for Coastal Passenger Vessel in the Perspective of Compatibility of Life Jacket with the Coastal Passenger Vessel / Ahmad Faizal Ahmad Fuad; Ab. Saman Abd Kadir; Mohd Zamani Ahmad |
New Product Pricing Using Fuzzy Logic Type-2 / Muhammad Ridwan Andi Purnomo |
Future Trend Analysis on the Design and Performance of Solar-Powered Electric Unmanned Aerial Vehicles / Parvathy Rajendran; Howard Smith |
Review of Solar and Battery Power System Development for Solar-Powered Electric Unmanned Aerial Vehicles |
An Introduction to Lightweight, Energy Saving, Environment Friendly Magnesium Based Nanocomposites: Materials of Upcoming Generation / Manoj Gupta; W.L.E. Wong |
Comparison of Three-Parameter Weibull Statistical Analysis of the Flexural Strength of Dense and Porous Sintered Clay / M. Abubakar; Norhayati Ahmad |
Influence of Nano-Polyaniline Contents on Mechanical Properties of Crosslink Recycled Polypropylene Polyaniline / Muhamad Rasyidi Husin; Agus Arsad; Mohd Shaiful Zaidi Mad Desa; Mohd Faizal Abdul Rahman |
TGO Formation with NiCoCrAlYTa Bond Coat Deposition Using APS and HVOF Method / S. Mohd Zulkifli; Muhammad Azizi Mat Yajid; Mohd Hasbullah Idris; M. Daroonparvar; Halimaton Hamdan |
Alteration by Cerium Element on Primary and Eutectic Mg2Si Phases in Al-20%Mg2Si In Situ Composite / Nur Azmah Nordin; Saeed Farahany; Tuty Asma Abu Bakar; Esah Hamzah |
Oxidation of Pure Aluminium Granules during In Situ Melting / Aslinda Saleh; Mohd Hasbullah Idris |