close
1.

図書

図書
Harold P. Klug, Leroy E. Alexander
出版情報: New York : Wiley, c1974  xxv, 966 p. ; 24 cm
所蔵情報: loading…
目次情報: 続きを見る
Elementary Crystallography / 1:
The Crystalline State / 1-1:
Crystalline and Amorphous Solids / 1-1.1:
Definition of a Crystal / 1-1.2:
Characteristics of the Crystalline and Vitreous States / 1-1.3:
Crystal Geometry / 1-2:
External Form and Habit of Crystals / 1-2.1:
Constancy of Interfacial Angles / 1-2.2:
Symmetry Elements of Crystals / 1-2.3:
Pseudosymmetry, 13 / 1-2.4:
Crystallographic Axes / 1-2.5:
Axial Ratios / 1-2.6:
The Six Crystal Symmetry Systems / 1-2.7:
Miller Indices / 1-2.8:
The Law of Rational Indices / 1-2.9:
Crystal Forms / 1-2.10:
Composite Crystals and Twinning / 1-2.11:
Equation for the Plane (hkl) / 1-2.12:
Zones and Zone Relationships / 1-2.13:
Space Lattices / 1-3:
Historical Introduction / 1-3.1:
Definition / 1-3.2:
The Unit Ceil / 1-3.3:
The 14 Bravais Lattices / 1-3.4:
Some Crystallographic Implications of Space Lattices / 1-3.5:
Distance between Neighboring Lattice Planes in the Series (hkl) / 1-3.6:
The Reciprocal Lattice / 1-3.7:
Point Groups and Space Groups / 1-4:
The Point Group or Crystal Symmetry Class / 1-4.1:
The Space Group / 1-4.2:
General References
Specific References
The Production and Properties of X-rays / 2:
X-Ray Safety and Protection / 2-1:
The Production of X-Rays / 2-2:
The Origin of X-Rays / 2-2.1:
X-Ray Tubes / 2-2.2:
Gas tubes / A:
Hot-cathode tubes / B:
Modern diffraction tube design / C:
Cold-cathode diffraction tubes / D:
High-intensity diffraction tubes / E:
Microfocus diffraction tubes / F:
Power Equipment for the Production of X-rays / 2-2.3:
Commercial X-ray Generators for Diffraction / 2-2.4:
Isotopic X-ray Sources / 2-2.5:
Properties of X-Rays and their Measurement / 2-3:
The X-ray Spectrum of an Element / 2-3.1:
The continuous x-ray spectrum
The characteristic x-ray spectrum
The Precise Determination of X-ray Wavelengths / 2-3.2:
Absorption of X-rays / 2-3.3:
Secondary Fluorescent and Scattered X-rays / 2-3.4:
Refraction of X-rays / 2-3.5:
Monochromatization of X-radiation / 2-3.6:
Single filter technique
Balanced-filter technique
Crystal monochromator techniques
Graphite monochromators
The Photographic Effects of X-rays / 2-3.7:
Fundamental Principles of X-ray Diffraction / 3:
Kinematical and Dynamical Diffraction Theory / 3-1:
The Geometry of Diffraction / 3-2:
Scattering of X-rays by Electrons and Atoms / 3-2.1:
Scattering by a Regularly Spaced Row of Atoms / 3-2.2:
Conditions for Diffraction by a Linear Lattice of Atoms / 3-2.3:
Diffraction by a Simple Cubic Lattice / 3-2.4:
Proof that the "Diffracting Plane" is a Lattice Plane / 3-2.5:
The Bragg Equation / 3-2.6:
Derivation of the Bragg Equation from the "Reflection" Analogy / 3-2.7:
The Geometrical Picture of Diffraction in Reciprocal Space / 3-2.8:
The Intensity of Diffraction / 3-3:
Perfect and Imperfect Crystals / 3-3.1:
Primary and Secondary Extinction / 3-3.2:
Relative and Absolute Intensities / 3-3.3:
Factors Affecting the Diffraction Intensities / 3-3.4:
The polarization factor
The Lorentz and "velocity" factors
The temperature factor
The atomic scattering factor
The structure factor
The multiplicity factor
The absorption factor / G:
Expressions for the Relative Intensity of Diffraction by the Various Techniques / 3-3.5:
Lattice-Centering and Space-Group Extinctions / 3-3.6:
Photographic Powder Techniques / 4:
The Debye-Scherrer Method / 4-1:
Introduction / 4-1.1:
Camera Design / 4-1.2:
General geometry
Details of camera construction
Camera support and alignment
Preparation of the Powder / 4-1.3:
Mounting the Powder / 4-1.4:
Making the Exposure / 4-1.5:
Processing the Film / 4-1.6:
Parafocusing Methods / 4-2:
Monochromatic-Pinhole Techniques / 4-3:
Forward-Reflection Method / 4-3.1:
Back-Reflection Method / 4-3.2:
Microcameras and Microbeam Techniques / 4-4:
High-Temperature Techniques / 4-5:
Low-Temperature Techniques / 4-6:
High-Pressure Techniques / 4-7:
Diffractometric Powder Technique
Geometry of the Powder Diffractometer / 5-1:
General Features / 5-1.1:
Details of the Optical Arrangement / 5-1.2:
The Seemann-Bohlin Diffractometer / 5-1.3:
Alignment and Angular Calibration of the Diffractometer / 5-1.4:
Operations appropriately performed in advance by the manufacturer
Further internal alignment of the goniometer
Alignment of the goniometer with respect to the x-ray tube
Calibration of the O? 2Theta; position
Calibration of angular registration between 0 and 180? 2Theta;
Profiles and positions of diffraction maxima / 5-2:
Convolution Synthesis of Line Profiles / 5-2.1:
X-ray source, g I
Flat specimen surface, g II
Axial divergence, g III
Specimen transparency, g IV
Receiving slit, g v
Comparison of calculated and experimental line profiles
Displacement and Breadth of Diffraction Maxima / 5-2.2:
Line position
Line breadth
The practical determination of the centroid and variance
Accurate Determination of Interplanar (d) Spacings / 5-2.3:
"Routine" Determination of Interplanar (d) Spacings / 5-2.4:
Electrical Characteristics of the Diffractometer / 5-3:
General Arrangement of Components / 5-3.1:
Radiation Detectors (Quantum Counters) / 5-3.2:
Gas-ionization counters
Geiger-Muller counters
Proportional counters
Scintillation counters
Solid-state (energy-dispersive) detectors
Nonlinearity of Detector Response / 5-3.3:
Monochromatizing Techniques / 5-3.4:
Pulse-height discrimination and analysis
Ross balanced filters
Crystal monochromators
Choice of Experimental Conditions and Procedures / 5-4:
Statistical Accuracy of Counter Measurements / 5-4.1:
The Specimen / 5-4.2:
Preparation of powders
Rotation of the specimen
Preferred orientation and the specimen mount
High-temperature techniques
Low-temperature techniques
Other special specimen techniques
Transmission Techniques / 5-4.3:
Continuous-Scan Techniques / 5-4.4:
Step-Scan Techniques and Automation / 5-4.5:
The Interpretation of Powder Diffraction Data / 6:
The Viewing and Precision Measurement of Powder Photographs / 6-1:
Determination of Interplanar (d) Spacings / 6-2:
Debye-Scherrer Patterns / 6-2.1:
Monochromatic-Pinhole (Flat-Film) Patterns / 6-2.2:
Indexing Cubic Powder Patterns / 6-3:
Reciprocal-Lattice Picture of Diffraction by a Cubic Powder / 6-3.1:
Indexing a Cubic Pattern by sin 2 Theta Ratios / 6-3.2:
Determination of the Unit-Cell Dimension a / 6-3.3:
Indexing a Cubic Pattern When a Is Known / 6-3.4:
Determination of Lattice Type / 6-4:
Indexing Noncubic Powder Patterns / 6-5:
Indexing Noncubic Patterns When the Unit-Cell Dimensions are Known / 6-5.1:
Graphical Methods of Indexing / 6-5.2:
Analytical Methods of Indexing: Tetragonal, Hexagonal, and Orthorhombic Patterns / 6-5.3:
Analytical Methods of Indexing: Monoclinic and Triclinic Patterns / 6-5.4:
Automated Computing Procedures for Indexing Powder Patterns / 6-6:
Programs for Patterns of Orthorhombic and Higher Symmetry / 6-6.1:
Programs for Patterns of Low Symmetry / 6-6.2:
The Measurement of Intensities from Photographic Blackening / 6-7:
Preparation of a Graded Intensity Scale / 6-7.1:
Visual Estimation of Intensities / 6-7.3:
Photometer Techniques / 6-7.4:
The Measurement of Intensities with the X-Ray Diffractometer / 6-8:
Putting Intensities on an Absolute Scale / 6-9:
Special Scattering and Diffraction Effects / 6-10:
Background Effects / 6-10.1:
Background due to lattice imperfections
Background due to general radiation
Absorption discontinuities
Air scatter
Secondary fluorescence radiation
Reflections of Unusual Char / 6-10.2:
Elementary Crystallography / 1:
The Crystalline State / 1-1:
Crystalline and Amorphous Solids / 1-1.1:
2.

図書

図書
O.G. Koch, G.A. Koch-Dedic
出版情報: Berlin : Springer, 1974  2 v. (1597p.) ; 25 cm
所蔵情報: loading…
3.

図書

東工大
目次DB

図書
東工大
目次DB
窯業教育委員会著
出版情報: 東京 : 窯業協会, 1974  295p ; 22cm
所蔵情報: loading…
目次情報: 続きを見る
まえがき 1
1章 セラミックスとその工業 1
   1.1 セラミックスの定義 1
   1.2 セラミックスの化学成分 3
   1.3 新しいセラミックス 4
   1.4 セラミックス工業 4
   1.5 セラミックス化学とセラミックス工業の特質 6
   問 題 7
2章 セラミックス化学の基礎 8
   2.1 原子と原子の組合せ 8
   2.1.1 元素と化合物 8
   2.1.2 原子と原子構造 9
   2.2 結晶とガラス 14
   2.2.1 結 晶 14
   2.2.2 単位格子と結晶系 15
   2.2.3 固体における化学結合 16
   2.2.4 イオン半径と配位数 20
   2.2.5 同質多像と転移 24
   2.2.6 単結晶と多結晶 26
   2.2.7 固 溶 体 26
   2.3 結晶構造と特性 30
   2.3.1 酸化物の結晶構造 30
   2.3.2 けい酸塩の構造 38
   2.3.3 結晶の観察と構造の解析 42
   2.4 ガラス状態 46
   2.4.1 ガラス状態の生成 46
   2.4.2 ガラスの構造 47
   2.5 相律と平衡状態図 50
   2.5.1 相と成分 50
   2.5.2 相 律 52
   2.5.3 状態図 54
   2.5.4 一成分系 54
   2.5.5 二成分系 58
   2.5.6 三成分系 74
   2.5.7 状態図 例1 MgO-SiO2系状態図 82
   2.5.8 状態図 例2 CaO-Al2O3-SiO2系状態図 83
   2.6 高温における変化 87
   2.6.1 高温における物質移動 87
   2.6.2 熱分解反応 89
   2.6.3 固相反応 93
   2.6.4 焼 結 97
   2.6.5 溶融と結晶化 100
   2.6.6 結晶成長 101
   2.7 セラミックスの組織 105
   2.7.1 セラミックスの組織 105
   2.7.2 組織と性質との関係 112
   2.8 粉体-水系の性質 121
   2.8.1 液体の表面張力 121
   2.8.2 液体界面への吸着 123
   2.8.3 コロイド状態 124
   2.8.4 鋳込泥漿 129
   問 題 131
3章 結晶質酸化物材料 134
   3.1 シリカ,SiO2(silica,二酸化けい素) 134
   3.1.1 シリカの存在 134
   3.1.2 多形転移 134
   3.1.3 原料の形態 139
   3.1.4 性質と用途 139
   3.1.5 不純物の影響,その他 141
   3.2 アルミナ,Al2O3(alumina,酸化アルミニウム) 142
   3.2.1 アルミナの製法 142
   3.2.2 アルミナ水和物とアルミナの多形 143
   3.2.3 コランダムの性質と用途 145
   3.2.4 その他のアルミナ多形の用途 149
   3.3 けい酸アルミニウムと粘土鉱物 149
   3.3.1 シリマナイト族鉱物 151
   3.3.2 ムライト 152
   3.3.3 粘土鉱物 153
   3.4 ベリリア,BeO(beryllia,酸化ベリリウム) 161
   3.4.1 原料と製法 161
   3.4.2 ベリリアの特性とベリリア磁器 161
   3.5 マグネシア,MgO(magnesia,酸化マグネシウム) 163
   3.5.1 マグネシアの原料 163
   3.5.2 ペリクレースと焼結マグネシア 165
   3.5.3 焼結マグネシアの物理的性質 165
   3.5.4 マグネシアの用途 167
   3.6 マグネシアの複酸化物 168
   3.6.1 MgO-SiO2系 168
   3.6.2 スピネルとMgO-Al2O3系 173
   3.6.3 MgO-Al2O3-SiO2系 174
   3.7 カルシア,CaO(calcia,酸化カルシウム) 175
   3.7.1 石 灰 石 175
   3.7.2 ドロマイト 178
   3.8 カルシアの複酸化物 179
   3.8.1 CaO-SO3系 179
   3.8.2 Cao-SiO2系 185
   3.9 遷移元素酸化物 185
   3.9.1 遷移元素の一般的性質 185
   3.9.2 原子構造と磁性 188
   3.9.3 磁性体化合物 189
   3.9.4 酸化物半導体 191
   3.9.5 誘電体化合物 193
   3.9.6 その他の遷移元素酸化物 194
   3.10 顔料の化学 198
   3.10.1 顔料粒子の集合体の性質 200
   3.10.2 顔料の隠蔽力 201
   3.10.3 顔料の着色力 202
   3.10.4 陶磁器への応用 202
   3.10.5 ガラスエナメルへの応用 204
   3.10.6 色ガラス 204
   3.11 耐火物の化学 205
   3.11.1 耐火物に必要な性質 205
   3.11.2 耐火物の種類と製造方法 207
   3.11.3 耐火物各論 210
   3.12 セメントの化学 214
   3.12.1 ポルトランドセメント 214
   3.12.2 アルミナセメント 222
   問 題 223
   研 究 225
4章 酸化物以外の諸材料 226
   4.1 炭素質材料 226
   4.1.1 ダイヤモンド 226
   4.1.2 黒 鉛 227
   4.1.3 黒 鉛 化 228
   4.1.4 その他の黒鉛製品 229
   4.2 炭化物材料 230
   4.2.1 炭化けい素 230
   4.2.2 その他の炭化物 232
   4.3 窒化物材料 233
   4.4 ほう化物材料 234
   4.4.1 ほう化物 234
   4.4.2 侵入型化合物 235
   4.5 けい化物材料 236
   4.6 硫化物材料 237
   4.7 その他の材料 238
   問 題 240
5章 ガラスおよびガラス質を含むけい酸塩材料 241
   5.1 Na2O(K2O,Li2O)-Al2O3-SiO2系 241
   5.1.1 Na2O-Al2O3-SiO2系 242
   5.1.2 K2O-Al2O3-SiO2系 246
   5.1.3 Li2O-Al2O3-SiO2系 248
   5.2 Na2O-CaO-SiO2系 250
   5.2.1 Na2O-CaO-SiO2系ガラス 250
   5.2.2 Na2O-CaO-SiO2系結晶 251
   5.3 ガラスの化学 252
   5.3.1 ガラス化反応 253
   5.3.2 けい酸塩ガラス 254
   5.3.3 ほうけい酸塩ガラス 255
   5.3.4 りん酸塩ガラス 256
   5.3.5 結晶化ガラス 256
   5.3.6 色ガラスと感光性ガラス 258
   5.3.7 乳白ガラス 259
   5.3.8 カルコゲンガラス 259
   5.4 ほうろうの化学 260
   5.5 陶磁器の化学 263
   5.5.1 陶磁器素地の配合 263
   5.5.2 陶器素地の焼成過程で起こる変化 265
   5.5.3 素地中に生ずる応力と機械的強度 269
   5.5.4 素地と釉層との関係 271
   問 題 273
付 表 275
参考文献 286
索 引 289
まえがき 1
1章 セラミックスとその工業 1
   1.1 セラミックスの定義 1
4.

図書

図書
edited by Saul Patai, Zvi Rappoport
出版情報: Chichester ; New York : Wiley, 1974-1988  4 v. ; 24 cm
シリーズ名: The Chemistry of functional groups
所蔵情報: loading…
5.

図書

図書
Mircea Eliade
出版情報: New York : Harper & Row, 1974  xiii, 173 p. ; 21 cm
所蔵情報: loading…
6.

図書

図書
Edited by Saul Patai
出版情報: London ; New York : Wiley, 1974  2 v. (xiii, 956 p.) ; 24 cm
シリーズ名: The Chemistry of functional groups
所蔵情報: loading…
7.

図書

図書
Kai Lai Chung
出版情報: New York ; Tokyo : Academic Press, c1974  xii, 365 p. ; 23 cm
シリーズ名: Probability and mathematical statistics : a series of monographs and textbooks ; 21
所蔵情報: loading…
目次情報: 続きを見る
Preface to the third edition
Preface to the second edition
Preface to the first edition
Distribution function / 1:
Monotone functions / 1.1:
Distribution functions / 1.2:
Absolutely continuous and singular distributions / 1.3:
Measure theory / 2:
Classes of sets / 2.1:
Probability measures and their distribution functions / 2.2:
Random variable. Expectation. Independence / 3:
General definitions / 3.1:
Properties of mathematical expectation / 3.2:
Independence / 3.3:
Convergence concepts / 4:
Various modes of convergence / 4.1:
Almost sure convergence; Borel-Cantelli lemma / 4.2:
Vague convergence / 4.3:
Continuation / 4.4:
Uniform integrability; convergence of moments / 4.5:
Law of large numbers. Random series / 5:
Simple limit theorems / 5.1:
Weak law of large numbers / 5.2:
Convergence of series / 5.3:
Strong law of large numbers / 5.4:
Applications / 5.5:
Bibliographical Note
Characteristic function / 6:
General properties; convolutions / 6.1:
Uniqueness and inversion / 6.2:
Convergence theorems / 6.3:
Simple applications / 6.4:
Representation theorems / 6.5:
Multidimensional case; Laplace transforms / 6.6:
Central limit theorem and its ramifications / 7:
Liapounov's theorem / 7.1:
Lindeberg-Feller theorem / 7.2:
Ramifications of the central limit theorem / 7.3:
Error estimation / 7.4:
Law of the iterated logarithm / 7.5:
Infinite divisibility / 7.6:
Random walk / 8:
Zero-or-one laws / 8.1:
Basic notions / 8.2:
Recurrence / 8.3:
Fine structure / 8.4:
Conditioning. Markov property. Martingale / 8.5:
Basic properties of conditional expectation / 9.1:
Conditional independence; Markov property / 9.2:
Basic properties of smartingales / 9.3:
Inequalities and convergence / 9.4:
Supplement: Measure and Integral / 9.5:
Construction of measure
Characterization of extensions
Measures in R
Integral
General Bibliography
Index
Preface to the third edition
Preface to the second edition
Preface to the first edition
8.

図書

図書
edited by A. J. Freeman, J. B. Darby, Jr
出版情報: New York : Academic Press, 1974-  v ; 24 cm
シリーズ名: Materials science and technology series
所蔵情報: loading…
9.

図書

図書
by the Secretary-General
出版情報: Paris : Organisation for Economic Co-operation and Development, 1974  2 v. ; 24 cm
所蔵情報: loading…
10.

図書

図書
F.A. Kröger
出版情報: Amsterdam : North-Holland Pub. Co , New York : American Elsevier, 1974  xviii, 988 p. ; 23 cm
シリーズ名: The chemistry of imperfect crystals / F. A. Kröger ; v. 2
所蔵情報: loading…
11.

図書

図書
Sharp, David William Arthur, 1931- ; Mays, Martin J., 1937-
出版情報: London : Butterworths , Baltimore : University Park Press, 1974-1975  2 v ; 24 cm
シリーズ名: MTP international review of science ; . Inorganic chemistry ; Ser. 2, v. 5, 6
所蔵情報: loading…
12.

図書

図書
Editors: G. W. Gray, P. A. Winsor
出版情報: Chichester, Eng. : E. Horwood , New York : Halsted Press, 1974  v. ; 24 cm
シリーズ名: Ellis Horwood series in physical chemistry ; . Liquid crystals & plastic crystals ; v. 1-2
所蔵情報: loading…
13.

図書

図書
editors, Edward C. Melby, Jr., Norman H. Altman
出版情報: Cleveland, Ohio : CRC Press, 1974-76  3 v. ; 26 cm
所蔵情報: loading…
14.

図書

図書
edited by R.W.B. Stephens and H.G. Leventhall
出版情報: London : Chapman and Hall , New York : Wiley, 1974-  v. ; 24 cm
所蔵情報: loading…
15.

図書

図書
F. D. Richardson
出版情報: London ; New York : Academic Press, 1974  2 v. ; 24 cm
所蔵情報: loading…
16.

図書

東工大
目次DB

図書
東工大
目次DB
臼井英治著
出版情報: 東京 : 共立出版, 1974-1977  2冊 ; 22cm
所蔵情報: loading…
目次情報: 続きを見る
上巻
1.切削加工
1.1 切削加工の概念
1.2 切削の諸現象とその理論
   1.2.2 2次元切削の力学 16
   (a)せん断面切削模型の力学的関係 16
   (b)切削条件による諸量の変化と切削の特異性 22
   (c)切削方程式 42
   (d)詳細な解析例 64
   1.2.3 3次元切削の力学 82
   (a) 2次元切削へのおきかえと切削抵抗の概算法 82
   (b) 1切刃の3次元切削(傾斜切削) 89
   (c) 2切刃の3次元切削(バイトによる切削) 96
   (d)特殊な場合 112
   1.2.4 振動.ビビリ 113
   (a)ビビリ振動の基本概念 113
   (b) 自励ビビリの安定性理論 118
   (c)最近の研究 131
   1.2.5 切削温度,高温切削と低温切削 133
   (a)切削温度 133
   (b)高温切削と低温切削 147
   1.2.6 工具材料,工具摩耗,工具寿命 151
   (a)工具材料 151
   (b)工具摩耗の諸特性 158
   (c)工具寿命の判定と寿命方程式 173
   1.2.7 構成刃先,仕上面あらさ,加工変質層 183
   (a)構成刃先とその諸影響 183
   (b)仕上面あらさ 195
   (c)加工変質層,残留応力 206
   1.2.8 切削油剤,快削添加物 219
   (a)切削油剤そとの作用機構 219
   (b)快削添加物,快削材料 226
   1.2.9 被削性と切削加工の経済性 235
   (a)被削性 235
   (b)経済的切削条件 237
   1.2.10 切削の諸測定 245
   (a)切削抵抗の測定 245
   (b)切削湿度の測定 250
   (c)工具摩耗の測定 253
1.3 平面,2次元的曲面の切削加工
   1.3.1 形削り,平削り 256
   1.3.2 フライス切削 261
   1.3.3 ブローチ切削 286
1.4 円筒面,回転対称面の切削加工
   1.4.1 旋削 294
   1.4.2 中ぐり,リーマ切削 309
1.5 穴あけ加工
   1.5.1 ドリル切削 324
   1.5.2 特殊ドリル切削 343
1.6 切断加工
   1.6.1 のこ引き切削 347
   1.6.2 旋削およびフライス切削による切断 353
1.7 曲面の切削加工
   1.7.1 ねじの切削-総形法 356
   1.7.2 歯車の切削-創生法 365
   1.7.3 ならい形彫り-サーボならい 385
索引
下巻
2.研削加工
2.1 研削加工の概念
2.2 研削砥石
   2.2.1 研削砥石の3要素,5因子 8
   2.2.2 切刃自生作用と砥石の研削状態 14
   2.2.3 研削砥石の製造法,研状,記号表示15
2.3 研削の諸現象とその理論
   2.3.1 研削切屑の生成機構 19
   2.3.2 研削機構の幾何学 23
   (a)諸量の概念 23
   (b)接触弧長さと砥粒切込み深さ 27
   (c)切屑断面積 32
   2.3.3 研削抵抗 33
   (a)研削機構に基づく解析 34
   (b)次元解析による実用式 38
   (c)研削抵抗の寸法効果 39
   2.3.4 研削精度,研削仕上面あらさ 43
   (a)研削精度 43
   (b)研削仕上面あらさ 47
   2.3.5 研削温度 56
   (a)研削エネルギ 56
   (b)工作物温度 57
   (c)砥石研削点温度,工作物表層温度 59
   (d)砥粒研削点温度,研削火花 63
   2.3.6 研削面の加工変質層 67
   (a)研削面の研度変化 67
   (b)研削焼け,研削割れ 70
   (c)残留応力 72
   2.3.7 研削油剤とその作用 74
   (a)研削油剤の作用 74
   (b)研削油剤の種類,添加剤の作用 74
   (c)研削油剤の効果,注液法 77
   2.3.8 研削砥石の損耗と寿命,ドレッシング,被研削性 80
   (a)砥石の損耗と自生作用,研削能率 80
   (b)砥石面の寿命 88
   (c)ドレッシング,トルーイング 99
   (d)被研削性 103
   2.3.9 研削の諸測定 105
   (a)砥石面の測定 105
   (b)研削抵抗の測定 110
   (c)研削温度の測定 114
2.4 平面,2次元的曲面の研削加工
   2.4.1 平面研削 118
   2.4.2 2次元的曲面の研削 128
2.5 円筒面,回転対称面の外面研削加工
   2.5.1 円筒外面研削 132
   2.5.2 外面の心無研削 143
2.6 円筒面,回転対称面の内面研削加工
   2.6.1 内面研削 152
   2.6.2 内面の心無研削 158
2.7 曲面の研削加工
   2.7.1 ねじの研削-総形法 161
   2.7.2 歯車の研削-創成法 166
   2.7.3 ならい研削-ならい法 171
2.8 自動定寸,研削加工の自動サイクル
   2.8.1 自動定寸 174
   2.8.2 研削加工の自動サイクル 179
2.9 切断研削,自由研削
   2.9.1 切断研削 183
   2.9.2 自由研削 185
2.10 ホーニング,超仕上
   2.10.1 ホーニング 189
   2.10.2 超仕上 198
   索引
上巻
1.切削加工
1.1 切削加工の概念
17.

図書

図書
edited by Hans Ulrich Bergmeyer, in collaboration with Karlfried Gawehn
出版情報: Weinheim : Verlag Chemie , New York : Academic Press, 1974  4 v. ; 24 cm
所蔵情報: loading…
18.

図書

図書
herausgegeben von Hildegard Temporini
出版情報: Berlin : W. de Gruyter, 1974-  v. ; 25 cm
シリーズ名: Aufstieg und Niedergang der römischen Welt : Geschichte und Kultur Roms im Spiegel der neueren Forschung / herausgegeben von Hildegard Temporini und Wolfgang Haase ; 2
所蔵情報: loading…
19.

図書

図書
edited by C. H. L. Goodman
出版情報: London ; New York : Plenum Press, 1974-  v. ; 24 cm
所蔵情報: loading…
20.

図書

東工大
目次DB

図書
東工大
目次DB
日本機械学会腐食疲れに関する調査研究分科会編
出版情報: 東京 : 日本機械学会, 1974.3  ii, 147p ; 26cm
シリーズ名: 金属材料疲れ強さの設計資料 / 日本機械学会編 ; 3
所蔵情報: loading…
目次情報: 続きを見る
   注 : σ[w]の[w]は下つき文字
   注 : σ[wc]の[wc]は下つき文字
   注 : σ[B]の[B]は下つき文字
   注 : σ[min]/σ[max]の[min]、[max]は下つき文字
   注 : K[ISCC]の[ISCC]は下つき文字
   
第1章 概説
   1.1 まえがき 1
   1.2 資料のとりまとめの経過 1
   1.3 解説 2
第2章 材質と環境効果
   2.1 まえがき 3
   2.2 鉄鋼系材料 3
    2.2.1 各種影響因子に対する腐食疲れ強さの依存度 3
    2.2.2 炭素鋼両振り腐食疲れ強さに対する炭素含有量の影響 9
   2.3 非鉄金属材料 12
    2.3.1 アルミニウムおよびアルミニウム合金 12
    2.3.2 銅および銅合金 14
    2.3.3 チタニウム合金 14
   2.4 各種材料の引張強さびσ[B]と腐食疲れ強さσ[wc]および大気中疲れ強さσ[w]との関係 14
    2.4.1 清水腐食疲れ 15
    2.4.2 食塩水腐食疲れ 15
第3章 ふん囲気効果
   3.1 真空の影響 20
   3.2 ふん囲気の種類 22
   3.3 高温における疲れ強さにおよぼす真空度の影響 22
   3.4 疲れき裂の発生と進展におよぼすふん囲気の影響 24
   3.5 疲れき裂のミクロ的様相におよぼすふん囲気の影響 24
第4章 腐食条件
   4.1 pH効果 26
    4.1.1 S-N曲線 26
    4.1.2 pHとσ[wc] 27
   4.2 温度の影響 28
    4.2.1 まえがき 28
    4.2.2 き裂進展速度 29
    4.2.3 疲れ強さ 32
   4.3 腐食様式 36
第5章 応力波形効果
   5.1 まえがき 37
   5.2 台形状応力波形下の腐食疲れ強さ 37
   5.3 腐食疲れき裂の進展速度に及ぼす応力波形効果 38
第6章 繰返し速度効果
   6.1 高サイクル疲れにおける速度効果 40
   6.2 低サイクル疲れにおける速度効果 40
第7章 き裂進展速度と環境効果
   7.1 まえがき 43
   7.2 高力アルミニウム合金 43
    7.2.1 応力比 R=σ[min]/σ[max] の影響 43
    7.2.2 水分ならびに湿気の影響 44
    7.2.3 水蒸気分圧の影響 45
    7.2.4 荷重繰返し速度の影響 46
    7.2.5 板厚の影響 46
    7.2.6 ふん囲気ガスの種類の影響 48
    7.2.7 温度の影響 48
    7.2.8 真空度の影響 48
   7.3 高力鋼 48
    7.3.1 湿気ならびに水素の影響 48
    7.3.2 応力比Rの影響 50
    7.3.3 温度の影響 50
    7.3.4 荷重繰返し速度の影響 51
    7.3.5 K[ISCC] との関係 52
第8章 防食法
   8.1 まえがき 54
   8.2 電気防食 54
    8.2.1 犠牲陽極法 55
    8.2.2 外部電源法 55
   8.3 ペイント塗装 59
    8.3.1 塗装材の腐食疲れ 59
    8.3.2 塗料の影響 61
    8.3.3 塗装欠損の影響 61
    8.3.4 長期腐食後の大気中疲れ強さに及ぼす塗装の影響 61
    8.3.5 大気中疲れに及ぼす塗装の影響,その他 62
   8.4 めっき 63
    8.4.1 まえがき 63
    8.4.2 めっきの効果 63
調査文献一覧表 66
データ表 73
   注 : σ[w]の[w]は下つき文字
   注 : σ[wc]の[wc]は下つき文字
   注 : σ[B]の[B]は下つき文字
21.

図書

東工大
目次DB

図書
東工大
目次DB
日本分析化学会編
出版情報: 東京 : 丸善, 1974.10  xiii, 531p ; 22cm
シリーズ名: 分析化学大系
所蔵情報: loading…
目次情報: 続きを見る
1 錯形成反応の熱力学
   1・1 イオンの水和 1
   1・1・1 水 1
   1・1・2 イオンの水和 2
   1・1・3 水和の自由エネルギー 4
   1・1・4 水和数の決定 11
   1・2 錯体と生成定数 18
   1・2・1 化学平衡 19
   1・2・2 錯体の生成定数 21
   1・2・3 イオンの活量係数 24
   1・2・4 生成関数 29
   1・3 錯体の生成定数と配位子 31
   1・3・1 生成定数の自由エネルギー直線関係 31
   1・3・2 キレート形成と生成定数 42
   1・3・3 配位子の構造と生成定数 59
   1・4 錯体の生成定数と中心金属 64
   1・4・1 結晶場の理論と生成定数の変化 64
   1・4・2 錯形成の静電モデル 74
   1・4・3 金属イオンの半径およびイオン化ボテンシャルと生成定数 81
   1・5 酸・塩基の硬さと軟らかさ 85
   1・5・1 酸・塩基の概念とHSAB 85
   1・5・2 HSABの理論的背景 92
   1・5・3 硬さと軟らかさの定量的取扱い 94
   1・5・4 LFERとHSAB 100
   1・5・5 熱力学的諸量とHSAB 107
   1・6 錯体の酸化還元電位 110
   1・6・1 電池と電池の標準電位 110
   1・6・2 酸化還元系の種類 112
   1・6・3 金属/金属イオン系の電位 112
   1・6・4 気体/イオン系の電位 115
   1・6・5 イオン/イオン系の電位 116
   1・6・6 沈殿あるいは錯体を含む電池の起電力 117
2 錯体の生成定数の決定法
   2・1 起電力測定による方法 121
   2・1・1 セリンと銅イオンとの錯体の生成定数 121
   2・1・2 EGTAとニッケル(II)イオンとの錯体の生成定数 132
   2・1・3 0.2モル分率(55.51wt%)ジオキサンー水混合溶液中のベリリウムイオンの加水分解反応 143
   2・2 吸光度測定による方法 152
   2・2・1 スルホサリチル酸鉄(III)錯体の生成定数とモル吸光係数 153
   2・2・2 亜鉛-PAR-プロトン錯体のモル吸光係数 156
   2・2・3 硫酸ウラニル錯体の生成定数 160
   2・2・4 酢酸溶液中における酢酸銅錯体の組成と生成定数 164
   2・2・5 錯体の生成定数とモル吸光係数を決定するための電子計算機プログラム 170
   2・3 ポーラログラフ法 175
   2・3・1 はじめに 175
   2・3・2 可逆ポーラログラフ系の生成定数を求める方法 178
   2・3・3 非可逆系の生成定数を求める方法 190
   2・3・4 拡散電流値から生成定数を求める方法 193
   2・3・5 非水溶媒中でのポーラログラフィー 198
   2・3・6 おわりに 199
   2・4 電導度測定による方法 199
   2・4・1 はじめに 199
   2・4・2 電解質溶液の電導性 201
   2・4・3 イオン会合(または解離)定数の決定 206
   2・4・4 考察 222
   2・5 液-液分配を用いる方法 223
   2・5・1 液-液分配法の概観 223
   2・5・2 分子性物質の会合と解離 229
   2・5・3 キレート抽出剤を用いる金属イオンの錯形成の測定 236
   2・5・4 中性抽出剤を用いる金属イオンの錯形成の測定 245
   2・5・5 有機溶媒中での会合平衡の測定 256
   2・5・6 液-液分配法で錯形成を測定する方法に関する二,三の考察 262
   2・6 溶解度測定による方法 269
   2・6・1 強電解質の解離度 270
   2・6・2 活量係数の測定 271
   2・6・3 溶液内の錯形成またはイオン会合定数の測定 273
   2・6・4 固相の状態 281
   2・6・5 溶解平衡に達した溶液を得る方法 283
   2・6・6 液相-固相の分離 286
   2・6・7 分析法 286
   2・7 反応速度を利用する方法 288
   2・7・1 反応速度を利用して生成定数を決定する一般的方法の一例 288
   2・7・2 ニッケル(II)イオンの加水分解定数の決定 291
   2・7・3 ニッケル(II)イオンの弱い錯体(二,三のモノアシドペンタアコニッケル(II)イオン)の生成定数の決定 293
   2・7・4 金属錯体の反応中間体の生成定数の決定 294
   2・7・5 プロトン錯体の生成定数の決定 297
   2・7・6 ナトリウム-EGTAおよびリチウム-EGTA錯体の生成定数の決定 298
   2・7・7 緩和法による生成定数の決定 300
3 錯体の関与する反応の機構
   3・1 金属イオンの錯形成反応の機構 307
   3・1・1 拡散律速 307
   3・1・2 プロトン移動反応 309
   3・1・3 錯形成反応機構(Eigen機構)と配位溶媒分子の交換速度 313
   3・1・4 錯形成反応速度に及ぼす二,三の因子 317
   3・2 配位子置換反応の機構 327
   3・2・1 配位子置換反応の分類と機構 327
   3・2・2 D機構の反応 328
   3・2・3 A機構の反応 331
   3・2・4 多座配位子を含む金属錯体の配位子置換反応 333
   3・2・5 配位子置換反応におけるプロトンの役割 344
   3・2・6 速度論的キレート効果 349
   3・3 金属置換反応の機構 353
   3・3・1 多座配位子を含む金属錯体の金属置換反応 354
   3・3・2 2核反応中間体 355
   3・3・3 CyDTA錯体の金属置換反応 357
   3・4 電子移動反応の機構 360
   3・4・1 はじめに 360
   3・4・2 電子交換反応速度の測定法 363
   3・4・3 電子移動反応の機構 365
   3・4・4 電子移動反応の理論 400
4 錯形成反応の応用
   4・1 キレート滴定 407
   4・1・1 キレート滴定の基礎 408
   4・1・2 キレート滴定の方法と滴定曲線 413
   4・1・3 電位差滴定による終点の決定 423
   4・1・4 金属指示薬による終点の決定 430
   4・1・5 選択滴定 445
   4・2 キレートの溶媒抽出 451
   4・2・1 正則溶液論の溶媒抽出への応用 451
   4・2・2 代表的キレート試薬によるキレート抽出の分析への応用 470
   4・3 電気分析における錯形成反応 473
   4・3・1 ポーラグラフ分析における錯形成反応 473
   4・3・2 応用例 475
   4・4 反応速度を利用する分析法 489
   4・4・1 反応速度を利用する定量分析の原理と方法 490
   4・4・2 反応速度を利用する定量分析の実例 505
   付表 1 単原子イオンの性質と水和の熱力学的諸量 519
   付表 2 多原子イオンの水和に関する熱力学的諸量 521
   索引 523
1 錯形成反応の熱力学
   1・1 イオンの水和 1
   1・1・1 水 1
22.

図書

東工大
目次DB

図書
東工大
目次DB
臼井英治, 白樫高洋著
出版情報: 東京 : 朝倉書店, 1974.10  2, 4, 302p ; 22cm
シリーズ名: 機械工学基礎シリーズ ; 3
所蔵情報: loading…
目次情報: 続きを見る
1.序論
2.基礎的諸関係
   2.1 応力とひずみ 4
   2.1.1 応力,モールの応力円 4
   2.1.2 ひずみ,ひずみ増分 12
   2.2 非圧縮性 21
   2.3 平衡条件 23
   演習問題 25
3.塑性変形と破壊の法則
   3.1 降伏条件 27
   3.2 塑性変形の法則 33
   3.3 破壊の法則 38
   3.3.1 脆性破壊 39
   3.3.2 延性破壊 50
   演習問題 54
4.各種機械加工の近似的解析
   4.1 平面ひずみ問題と軸対称問題 56
   4.1.1 平面ひずみ問題 56
   4.1.2 軸対称問題 59
   4.2 完全塑性体 62
   4.3 成形加工 64
   4.3.1 曲げ加工 65
   4.3.2 鍛造加工 74
   4.3.3 押出し加工,引抜き加工 84
   4.3.4 圧延加工 95
   4.3.5 深絞り加工 101
   4.4 せん断加工 108
   4.4.1 せん断加工機構 109
   4.4.2 精密せん断加工 113
   4.5 切削加工 115
   4.5.1 2次元切削 115
   4.5.2 3次元切削 132
   4.6 砥粒加工 152
   4.6.1 研削加工 153
   4.6.2 遊離砥粒加工 163
   演習問題 170
5.すべり線理論とその応用
   5.1 すべり線理論 173
   5.1.1 すべり線の幾何学的性質と応力場 175
   5.1.2 すべり線速度の場とホドグラフ 180
   5.1.3 すべり線場解の構成 184
   5.2 すべり線理論による解析例(剛完全塑性体) 186
   5.2.1 鍛造加工 186
   5.2.2 引抜きおよび押出し加工 195
   5.2.3 切削加工 202
   演習問題 210
6.上界,下界定理とその応用
   6.1 塑性ポテンシャル,最大塑性仕事の原理 212
   6.2 上界定理,下界定理 215
   6.3 上界定理の応用例 219
   演習問題 226
7.材料物性の導入
   7.1 加工硬化 227
   7.1.1 塑性仕事の等価性 227
   7.1.2 加工硬化の補正 230
   7.1.3 完全な応力-ひずみ関係 233
   7.1.4 格子線解析法 235
   7.2 温度,ひずみ速度の効果 240
   7.2.1 ひずみ速度修正温度 240
   7.2.2 ひずみ速度履歴を考慮した実験式 241
   7.2.3 温度効果,ひずみ速度効果の補正 243
   7.3 摩擦の特性 244
   7.3.1 スベリ摩擦,付着摩擦 245
   7.3.2 摩擦特性の表示 246
   7.4 異方性 249
   7.4.1 直交異方性をもつ材料の降伏と流動 249
   7.4.2 変形中の異方性の変化 251
   演習問題 252
8.加工過程のシミュレーション
   8.1 シミュレーションと有限要素法 254
   8.2 切削過程のシミュレーション 260
   8.2.1 論理の概略 260
   8.2.2 温度分布の数値計算 262
   8.2.3 シミュレーションの結果 263
   演習問題 264
9.動塑性加工
   9.1 応力,変形の伝播 267
   9.1.1 基礎方程式とその性質 267
   9.1.2 応力波の伝播と応力-ひずみ曲線 270
   9.1.3 応力波の干渉 272
   9.2 衝撃圧縮加工 276
   9.2.1 棒の端末における応力波の挙動 278
   9.2.2 棒の単軸圧縮 278
   演習問題 280
   参考図書 282
   付録 283
   演習問題の答とヒント 286
   索引 299
1.序論
2.基礎的諸関係
   2.1 応力とひずみ 4
23.

図書

図書
今堀和友, 野田春彦, 坪井正道編
出版情報: 東京 : 朝倉書店, 1974.6  2冊 ; 22cm
所蔵情報: loading…
24.

図書

図書
青木正夫 [ほか] 著
出版情報: 東京 : 丸善, 1974.11-1976.4  2冊 ; 27cm
シリーズ名: 建築計画学 / 吉武泰水編 ; 8-9
所蔵情報: loading…
25.

図書

図書
edited by J. H. Richardson and R. V. Peterson
出版情報: New York : Academic Press, 1974-1978  4 v. ; 24 cm
シリーズ名: Materials science series
所蔵情報: loading…
26.

図書

図書
Keith B. Oldham, Jerome Spanier
出版情報: New York : Academic Press, 1974  xiii, 234 p. ; 24 cm
シリーズ名: Mathematics in science and engineering : a series of monographs and textbooks ; v. 111
所蔵情報: loading…
目次情報: 続きを見る
Preface
Overview / 1:
Methods of Operator Approximation in System Modelling / I:
Nonlinear Operator Approximation with Preassigned Accuracy / 2:
Introduction / 2.1:
Generic formulation of the problem / 2.2:
Operator approximation in space C([0; 1]) / 2.3:
Operator approximation in Banach spaces by polynomial operators / 2.4:
Approximation on compact sets in topological vector spaces / 2.5:
Approximation on noncompact sets in Hilbert spaces / 2.6:
Special results for maps into Banach spaces / 2.7:
Concluding remarks / 2.8:
Interpolation of Nonlinear Operators 65 / 3:
Lagrange interpolation in Banach spaces / 3.1:
Weak interpolation of nonlinear operators / 3.3:
Some related results / 3.4:
Realistic Operators and their Approximation / 3.5:
Formalization of concepts related to description of real-world objects / 4.1:
Approximation of RÂícontinuous operators / 4.3:
Methods of Best Approximation for Nonlinear Operators / 4.4:
Best Approximation of nonlinear operators in Banach spaces: Deterministic case / 5.1:
Estimation of mean and covariance matrix for random vectors / 5.3:
Best Hadamard-quadratic approximation / 5.4:
Best polynomial approximation / 5.5:
Best causal approximation / 5.6:
Best hybrid approximations / 5.7:
II Optimal Estimation of Random Vectors / 5.8:
Computational Methods for Optimal Filtering of Stochastic Signals / 6:
Optimal linear Filtering in Finite dimensional vector spaces / 6.1:
Optimal linear Filtering in Hilbert spaces / 6.3:
Optimal causal linear Filtering with piecewise constant memory / 6.4:
Optimal causal polynomial Filtering with arbitrarily variable memory / 6.5:
Optimal nonlinear Filtering with no memory constraint / 6.6:
Computational Methods for Optimal Compression and Reconstruction of Random Data / 6.7:
Standard Principal Component Analysis and Karhunen-Loeeve transform (PCA{KLT) / 7.1:
Rank-constrained matrix approximations / 7.3:
Generic PCA{KLT / 7.4:
Optimal hybrid transform based on Hadamard-quadratic approximation / 7.5:
Optimal transform formed by a combination of nonlinear operators / 7.6:
Optimal generalized hybrid transform / 7.7:
Bibliography / 7.8:
Index
Preface
Overview / 1:
Methods of Operator Approximation in System Modelling / I:
27.

図書

図書
I.I. Gihman, A.V. Skorohod ; translated from the Russian by S. Kotz
出版情報: Berlin ; New York : Springer-Verlag, 1974-c1979  3 v. ; 25 cm
シリーズ名: Die Grundlehren der mathematischen Wissenschaften ; Bd. 210, 218, 232
所蔵情報: loading…
28.

図書

図書
小平吉男著
出版情報: 東京 : 現代工学社, 1974  2冊 ; 22cm
所蔵情報: loading…
29.

図書

図書
by A. Pande
出版情報: New York : Marcel Dekker, [1974-1975]  4 v. (xi, 1184 p.) ; 24 cm
所蔵情報: loading…
30.

図書

図書
edited by Norman L. Weinberg
出版情報: New York : Wiley, [1974]-c1982  3 v. ; 23 cm
シリーズ名: Techniques of chemistry ; v. 5
所蔵情報: loading…
31.

図書

図書
[by] Thomas Babington Macaulay ; arranged by A.J. Grieve
出版情報: London : Dent , New York : Dutton, 1974  2 v. ; 19 cm
シリーズ名: Everyman's library ; no. 225, 226
所蔵情報: loading…
32.

図書

東工大
目次DB

図書
東工大
目次DB
高原康彦著
出版情報: 東京 : 日刊工業新聞社, 1974.9  3, 4, 341, 4p ; 22cm
所蔵情報: loading…
目次情報: 続きを見る
1. 序章
   1.1 システム工学の理論 特に意思決定問題を中心として 1
   1.2 従来のシステムモデル 8
   1.2.1 物理法則によるモデル 8
   1.2.2 オートマトン的モデル 17
   1.2.3 確率的モデル 20
   1.3 記号と数学的準備 22
   1.3.1 集合論 22
   1.3.2 代数的概念 35
   1.3.3 位相 42
   1.3.4 その他 44
   1.3.5 記号 45
2. システムの基礎的概念
   2.1 システムの基本的概念とシステムの一般的定義 47
   2.1.1 モデルーシステムの記述 47
   2.1.2 属性とシステムオブジェクト 49
   2.1.3 システムの一般的定義 50
   2.1.4 入力-出力システム 54
   2.2 システムオブジェクトの性質とシステムの分類 56
   2.2.1 システムオブジェクトの性質 56
   2.2.2 システムの分類 64
   2.3 システムのモデル 68
   2.3.1 モデルの定義 68
   2.3.2 モデルの簡単化の概念 75
   2.4 システムの構成的表現 76
   2.4.1 一般システムの構成的表現 77
   2.4.2 線形系の構成的表現 80
3. 時間システムの表現
   3.1 状態表現の定義 86
   3.1.1 初期状態表現と因果性 86
   3.1.2 入力-出力応答 92
   3.1.3 ダイナミカルシステム 95
   3.1.4 正準表現 100
   3.1.5 定常系の状態表現 103
   3.2 実現性理論とダイナミカルシステム表現 105
   3.2.1 実現性理論 105
   3.2.2 時間システムのダイナミカルシステム表現の構成-Nerode realization 113
   3.3 状態空間と正準表現 123
   3.3.1 状態空間の存在 123
   3.3.2 正準表現の実現 130
   3.4 定常系の表現理論 138
4. 線形時間システムの表現
   4.1 線形系の初期状態表現と入力-出力応答 148
   4.1.1 線形系の初期状態表現 148
   4.1.2 線形系の入力-出力応答 151
   4.2 線形系の実現性理論 156
   4.3 定常線形時間システムの状態表現 166
5. 最小実現と状態表現の一意性
   5.1 最小実現の概念 171
   5.2 最小実現の特徴づけ 177
   5.3 状態表現の一意性 183
6. 非決定論的システム
   6.1 非決定論的システムの表現 187
   6.2 確率的システムの表現と性質 190
7. システムの安定
   7.1 システムの安定の例 208
   7.2 安定の概念 211
   7.2.1 近傍概念 211
   7.2.2 リアプノフ型の安定 212
   7.2.3 ポアソン型の安定 215
   7.3 安定性の条件 216
   7.3.1 線形系の安定 216
   7.3.2 非線形系の安定 221
   7.4 状態空間の距離概念とリアプノフの安定性の基本的性質 228
   7.4.1 状態空間の距離概念 228
   7.4.2 リアプノフの安定性の基本的性質 238
8. 情報
   8.1 情報システムの例 241
   8.2 情報システムの定式化 243
   8.2.1 情報源 243
   8.2.2 符号化器 244
   8.2.3 通話路 244
   8.2.4 デコーダ 245
   8.3 情報量の定義と基本概念 246
   8.3.1 情報量の定義 246
   8.3.2 基本概念 251
   8.4 シャノンの基本定理 254
9. 意思決定システム
   9.1 意思決定の例 260
   9.2 意思決定システムの定式化 262
   9.3 目的関数(効用関数)の存在 267
   9.4 主観確率と危険下での意思決定 273
   9.4.1 主観確率 273
   9.4.2 危険下での意思決定 281
   9.5 不確実下での意思決定 285
   9.5.1 意思決定の原則 285
   9.5.2 原則(基準)成立のための仮定 289
10. 大規模システム
   10.1 大規模システムの考え方 303
   10.2 大規模システムの定式化 305
   10.3 社会厚生関数の理論 308
   10.4 チームの理論 315
   10.4.1 一般論 315
   10.4.2 情報構造 320
   10.5 多階層システム 325
   10.5.1 多階層システムの例 325
   10.5.2 多階層システムの定式化 329
   10.5.3 統合可能性とゴールの調和性 334
   10.5.4 統合原則 337
参考文献 341
索引 343
1. 序章
   1.1 システム工学の理論 特に意思決定問題を中心として 1
   1.2 従来のシステムモデル 8
33.

図書

図書
ホワイト, ハンドラー, スミス [著] ; 鈴木旺 [ほか] 監訳
出版情報: 東京 : 広川書店, 1974-1975  2冊 ; 27cm
所蔵情報: loading…
34.

図書

図書
W. H. ギート [著] ; 久我修訳
出版情報: 東京 : みすず書房, 1974.8-1975.1  2冊 ; 22cm
所蔵情報: loading…
35.

図書

図書
edited by Koji Nakanishi ... [et al.]
出版情報: Tokyo : Kodansha , New York : Academic Press, c1974-  v. ; 26 cm
シリーズ名: Kodansha scientific books
所蔵情報: loading…
36.

図書

図書
グレゴリー・H.ワニアー著 ; 西川恭治, 川村清共訳
出版情報: 東京 : 紀伊国屋書店, 1974.5-1975  2冊 ; 22cm
シリーズ名: 現代基礎物理学選書
所蔵情報: loading…
37.

図書

図書
American Chemical Society. Division of Industrial and Engineering Chemistry
出版情報: Washington : [s.n.], 1974  ix, 331 p. ; 23 cm
シリーズ名: Advances in chemistry series ; 132
所蔵情報: loading…
38.

図書

図書
Richard Courant and Fritz John, with the assistance of Albert A. Blank, Alan Solomon
出版情報: New York : Wiley-Interscience, c1974  xxiii,954 p. ill. ; 23 cm
所蔵情報: loading…
目次情報: 続きを見る
Relations Between Surface and Volume Integrals: Connection Between Line Integrals and Double Integrals in the Plane
Vector Form of the Divergence Theorem / Stokes's Theorem
Formula for Integration by Parts in Two Dimensions: / Green's Theorem
The Divergence Theorem Applied to the Transformation of Double Integrals
Area Differentiation
Interpretation of the Formulae of Gauss and Stokes by Two-Dimensional Flows
Orientation of Surfaces
Integrals of Differential Forms and of Scalars over Surfaces
Gauss's and Green's Theorems in Space
Appendix: General Theory of Surfaces and of Surface Integrals.- Differential Equations: The Differential Equations for the Motion of a Particle in Three Dimensions
The General Linear Differential Equation of the First Order
Linear Differential Equations of Higher Order
General Differential Equations of the First Order
Systems of Differential Equations and Differential Equations of Higher Order
Integration by the Method of Undermined Coefficients
The Potential of Attracting Charges and Laplace's Equation
Further Examples of Partial Differential Equations from Mathematical Physics
Calculus of Variations: Functions and Their Extreme Values of a Functional
Generalizations
Problems Involving Subsidiary Conditions. Lagrange Multipliers
Functions of a Complex Variable: Complex Functions Represented by Power Series
Foundations of the General Theory of Functions of a Complex Variable
The Integration of Analytic Functions
Cauchy's Formula and Its Applications
Applications to Complex Integration (Contour Integration)
Many-Valued Functions and Analytic Extension.
List of Biographical Dates
Index
Relations Between Surface and Volume Integrals: Connection Between Line Integrals and Double Integrals in the Plane
Vector Form of the Divergence Theorem / Stokes's Theorem
Formula for Integration by Parts in Two Dimensions: / Green's Theorem
39.

図書

図書
亀谷哲治, 福本圭一郎共著
出版情報: 東京 : 南江堂, 1974.12-1975.6  2冊 ; 27cm
シリーズ名: 有機合成化学 / 亀谷哲治編著 ; 1-2
所蔵情報: loading…
40.

図書

図書
S.M.Sze原著 ; 柳井久義, 小田川嘉一郎, 生駒俊明共訳
出版情報: 東京 : コロナ社, 1974-1975  2冊 ; 22cm
所蔵情報: loading…
41.

図書

図書
ル・リヨネ編 ; 村田全監訳
出版情報: 東京 : 東京図書, 1974-1975  3冊 ; 19cm
所蔵情報: loading…
42.

図書

図書
[by] M. M. Taqui Khan [and] Arthur E. Martell
出版情報: New York : Academic Press, 1974  xi, 195 p. ; 24 cm
シリーズ名: Homogeneous catalysis by metal complexes / [by] M. M. Taqui Khan [and] Arthur E. Martell ; v. 2
所蔵情報: loading…
43.

図書

図書
ed. by Daniel H. Carson
出版情報: Stroudsburg : Dowden, Hutchinson & Ross, [1974]  v. ; 26 cm
シリーズ名: Community development series ; 22
所蔵情報: loading…
44.

図書

図書
hrsgegeben im Auftrage des Gemeinschaftswerkes Archiv und Dokumentation der Jugendbewegung von Werner Kindt ; mit einem Nachwort von Hans Raupach
出版情報: Düsseldorf ; Köln : Diederichs, 1974  2 v. (1840 p.) ; 26 cm
シリーズ名: Dokumentation der Jugendbewegung ; 4-5
所蔵情報: loading…
45.

図書

図書
edited by Takesi Nagata
出版情報: Tokyo : National Institute of Polar Research, 1974  i, 83 p. ; 27 cm
シリーズ名: Memoirs of National Institute of Polar Research ; Special issue, no. 3
所蔵情報: loading…
46.

図書

図書
von einem Autorenkollektiv unter Leitung von Wolfgang Spiewok ; Bearbeitung und Redaktion, Friedel Wallesch
出版情報: Berlin : Volk und Wissen, 1974  2 v. ; 20 cm
シリーズ名: Romanführer A-Z / herausgegeben von Kollektiv für Literaturgeschichte unter Leitung von Kurt Böttcher in Zusammenarbeit mit Günter Albrecht ; Bd. 2
所蔵情報: loading…
47.

図書

図書
Hermann Kinder and Werner Hilgemann ; translated by Ernest A. Menze ; with maps designed by Harald and Ruth Bukor
出版情報: Harmondsworth, Middlesex, Eng. : Penguin Books, 1974-1978  2 v. ; 18 cm
シリーズ名: Penguin reference books
所蔵情報: loading…
48.

図書

図書
Paul Roman
出版情報: New York : Pergamon Press, [1974, c1975]  2 v. (xlviii, 666 p.) ; 23 cm
所蔵情報: loading…
49.

図書

図書
児島襄著
出版情報: 東京 : 文藝春秋, 1974  5冊 ; 20cm
所蔵情報: loading…
50.

図書

図書
Alan W. Agar, Ronald H. Alderson, and Dawn Chescoe
出版情報: Amsterdam : North-Holland , New York : Sole distributors for the U.S.A. and Canada, Elsevier, 1974  xiv, 345 p. ; 23 cm
シリーズ名: Practical methods in electron microscopy / edited by Audrey M. Glauert ; v. 2
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼