| Fabrication and Characterization of Chromium-Coated Graphite Fibers Reinforced Copper Matrix Composites / Hao Ming Zhang; Xin Bo He; Xuan Hui Qu |
| Effective Means of Microstructure Homogenization for AgMeO: Cumulative Extrusion Severe Plastic Deformation / Xiao Long Zhou; Jian Chun Cao; Yu Cao; Yong Jun Fan; Jing Chao Chen |
| Oxidation Resistance of Graphite-SiAlON Bonded SiC Composite / Wen Wu Wang; Hui Yan Cao; Jin Xiang Wang; Zhi Ping Zhang |
| Influence of Thermite Reaction on the Microstructures and Properties of Cast-Infiltration Composite Layer / Yan Yan Ren; Guo Shang Zhang; Shi Zhong Wei; Ji Wen Li; Liu Jie Xu |
| Effects of High Temperature on Tensile and Bending Strengths of T300 Carbon Fiber Three Dimensional Braided Composites / Qian Liu; Jian Yang; Ye Hong He; Jia Lu Li |
| Structure-Property Correlation of Composites Impregnated with Aspartimide Oligomer / Peng Chang Ma; Hong Bo Liu |
| Study on the Resin Curing Time and the Mechanical Properties of the Composites / Jia Ying Sun; Yan Qing Li; Wei Tian; Cheng Yan Zhu |
| Ag Supported Si-Doped Graphene for Hydrogen Sulphide Detection: A First-Principles Investigation / Xian Qin; Qing Yuan Meng; Yu Fei Gao |
| Influence of Interfacial Bond Strength on the Mechanical Properties of Resin Mineral Composite Reinforced by Molybdenum Fibers / Ze Ning Wang; Jian Hua Zhang; Xiu Hua Ren; Tao Wang; Xiao Quan Tian |
| Test Study and Application of Corundum Slag in Slag-Forming of BOF / Lu Chen; Jian Hua Zeng; Yong Chen; Xin Teng Liang; Jun Chen |
| The Effects of Fiber Volume Fraction on the Vibration Damping Characteristics of Three-Layer-Connected Biaxial Weft Knitted Fabric Reinforced Composite Materials / Jing Xue Liu; Jia Lu Li |
| Characterization of the Interphase in Carbon Fiber/Epoxy Composites Using Force Modulation Atomic Force Microscope / Hao Xue; Hong Jun Fu |
| Preparation of Cu2O (Cu)/MWCNTs Composite Particles and Their Gas Sensor Properties / Zhuan Fang Zhang; Guang Ming Yin; Ying Yang |
| The Modification of Mesoporous Silica SBA-15-Type with PEG / Yu Yuan Zhi; Lei Zu; Kai Gu; Hui Qin Lian; Xiu Guo Cui |
| Preparation of Cu-Coated Diamond Particles and its Influence on the Performances of Diamond/Cu Composites / Yu Jun Zhang; Hua Chun Cai; Zhuo Shen Shen |
| Synthesis and Characterization of Mn-Doped Copper Chromite Black Pigments / Ming Quan Ye; Ai Jun Han; Zhou Shuo Chu; Jian Fei Che; Chen Wang |
| Investigation on Tensile Properties of Two Guide Bar Warp Knitted Fabric Reinforced Composites / Zhi Gang Qin; Bao Shi |
| Al/B4C Laminated Composite Fabricated by Powder Metallurgy Process and its Mechanical Property / Shuang Zhang; Ying Shui Yu; Jing Han Tu; Ting Ju Li |
| Synthesis of Microporous-Mesoporous Carbons from Rice Husk via H3PO4-Activation / J. Jandosov; Zulhair A. Mansurov; Mahmut A. Bijsenbayev; Marat I. Tulepov; Zinfer R. Ismagilov; Nadezhda V. Shikina; Ilyas Z. Ismagilov; I.P. Andrievskaya |
| The Slagging Model Research of Refining-Slag for High Aluminum Steel / Min Zhang; Jian Hua Zeng; Xing Di Yang; Yao Xian Zeng |
| Evaluation of the Direct Tensile Behavioral Characteristics of UHPC Using Twisted Steel Fibers / Gum Sung Ryu; Si Hwan Kim; Gi Hong Ahn; Kyung Taek Koh |
| Synthesis, Characterization and Optical Properties of Y6-xSmxMoO12+#963; Composite/Compounds Pigments with High Near-Infrared Reflectance / Xiao Yu Zhang; Yu Jun Zhang; Hong Yu Gong; Xin Qiao Zhao; Cui Ling Wang; Hong Li Zhu |
| Effects of MoSi2 and Si3N4 on Performance of Sintering and Antioxidation of AlN-ZrO2 System Composites / Bin Feng; Rong Lin Wang; Guang Na Wu; Jing Long Bu |
| Stress Characteristics Analysis on a Composite Wind Turbine Blade / Peng Zhan Zhou; Fang Sheng Tan |
| Low Grade of Kyanite Ore Beneficiation Experimental Research in Xingtai / Jin Xia Zhang; Qi Hui Dai; Li Nan Tian; Xing Guo Wang |
| Application of Fiber Reinforced Composites for Wushu Equipment / Wei Chen; Chao Liu |
| Kyanite's Status of Beneficiation Process and Application / Fu Sheng Niu; Li Nan Tian; Jin Xia Zhang; Xing Guo Wang |
| Research on Dual Liquid Bimetal Composite Casting Lining Board / Shou Fan Rong; Yong Chang Zhu; Ji Wei Guo; Hai Tao Zhou |
| The Research of Acoustic Characteristic from a Submerged Viscoelastic Functionally Graded Materials / Yan Bing Zhang; Chun Yu Ren; Xi Zhu |
| Photocatalytic Reaction of SiO2/TiO2 Composite Core-Shell Structured Powders / Lek Sikong; Pattamon Masom |
| The Effect of Cooling Rate During the Hydrothermal Growth on the Tip Geometry of ZnO Nanorods / He Qiu Zhang; Xiu Ming Ren; Li Zhong Hu; Jiu Yu Ji; Yang Li; Jun Lin Liu; Hong Wei Liang; Ying Min Luo; Ji Ming Bian |
| Synthesis and Characterization of Silver Immobilized on Glass Fibers / Lek Sikong; Wasin Triprakong |
| Solid-State Chemical Reaction Synthesis and Characterization of Nanocrystalline CePO4 under Ultrasonication Spectra / Dao Hua Li |
| Preparation of Polyurethane-Poly (Vinyl Alcohol) / Chitosan Blend Nanofiber Nonwovens by Coelectrospinning / Wei Min Kang; Jing Yan; Bo Wen Cheng |
| Low Hydrogen Pressure Induced High Anisotropy in HDDR-Treated Nd13Fe75Co4B8 Powders / Guang Bing Han; Shuang Fu |
| Infrared Extinction Properties of Randomly Oriented Columnar Nano-Graphite Particles / Hong Xia Wang; Zi Biao Song; Ni Chen Yang; Jin Ma |
| Study of Degradation of Photocatalytic Methyl Orange on Nano NdxCo2-xZr2O7 / Yun Shan Bai; Song Chen; Lu De Lu; Jian Chun Bao |
| Influence of Nano Particle on Flexural and Impact Properties of Sandwich Structures / N.R.R. Anbusagar; P.K. Giridharan; K. Palanikumar |
| Study of Preparation of Nano NdxCo2-xZr2O7 and its Catalytic Properties on Ammonium Perchlorate Thermal Decomposition / Yun Shan Bai; Jian Ping Zeng; Lu De Lu; Jian Chun Bao |
| Synthesis of Silicon Carbide Nanoparticles from Carbon Nanotubes / Jing Liu; Rong Wu; Jin Li; Yan Fei Sun; Ji Kang Jian |
| Silver Nanoparticles with Enhanced Fluorescence Effects on Fluorescein Derivative / Chun Yang; Feng Yan Ge; Jin Cai Li; Zai Sheng Cai; Fang Fang Qin |
| Effect of Grain Size on Phase Transitions and Dielectric Properties of Nano-Crystalline Barium Titanate Ceramics / Li Ming Wang; Xiang Yun Deng; Hai Tao Zhang; Jian Bao Li; Di Chen; Ri Ke Chen; Guo Qing Zhang; Kui Fan Su; Chun Peng Wang |
| Preparation and Characterization of Nano-Ni/B Composite Particles / Yong Qi Wei; Xin Chen; Ai Jun Han; Ming Quan Ye |
| Effect of Mechanical Stresses on Metastability of Heterophase Superparamagnetic Nanoparticles / Afremov Leonid; Ilia Ilyushin |
| Preparation, Characterization of N-Ti-MCM-22 Molecular Sieve and its Photocatalytic Properties / Yue Cheng; Xiao Yuan Su |
| Ultrasound-Assisted Solution Synthesis and Characterization of Sea Urchin-Like ZnO Hierarchical Microstructures / Yan Wei Li; Guang Sun; Feng Xiao Qi; Nai Teng Wu; Jian Liang Cao; Ha Ri Bala; Zhan Ying Zhang |
| Applications of Nanostructured Materials as Additives in Space Fluid Lubricants / Kai Feng Zhang; Hui Zhou; Rui Peng Sang; Zhi Hua Wan; Han Jun Hu |
| A New Numerical Method for Solving the Heat Conduction Equation in One Dimensional Nanometer Materials / Jia Chun Liu; Pei Chen Wang |
| Controllable Synthesis of Spheroid Hydroxyapatite Nanoparticles by Rverse Microemulsion Method / Tao Fan; Yan Rong Sun; Li Guo Ma |
| Preparation and In Vitro Drug Release Studies of Arginine Loaded Starch Microspheres / Min Peng Zhu; Su Hong Li |
| Effect of Lithium-Doped on the Crystal Structure and Morphology of ZnO Nanorod Arrays / Yang Lin Liu; Xue Chen Duan; Shu Yun Liu; Yan Yan Liu |
| Electrochemical Behaviours of Scutellarin at Multi-Wall Carbon Nanotubes Modified Glassy Carbon Electrode / Zhuo Cai; Wei Chao Yue; Jing Ni Gan; Yue Peng; Xiao Liang He |
| Size and Interface Coherency Dependent Phase Transformation of Niobium Nanoparticles Embedded in Copper Matrix by Mechanical Alloying / Ruo Shan Lei; Shi Qing Xu; Ming Pu Wang; Ye Jun Li; Wei Hong Qi |
| Effects of Doped AE (Ca, Sr) on Synthesis and Structure of Lanthanum Chromite-Based Nano-Powder / Xin De Zhu; Sheng Li Li; Jian Hua Zhang; Qing Ao |
| Preparation and Properties of Organo-Montmorillonite Modified R-122 Nanocomposite / Chun Qing Huo; Hong Juan Gu; Zai Qian Yu; Long Zhang |
| Preparation of the Silica Micro-Spheres by Chemical Precipitation Process / Bin Wen; Chun Qing Huo; Cong Hao Li; Long Zhang |
| Preparation and Properties of Polypropylene/Expended Vermiculite Micro-Nano Composite / Wei Shang; Dong Li Li; Wen Cai Xu; Xue Mei Yu |
| Effect of the Nanostructured Carbon Sorbent «Ingo-2» and Cadmium Chloride on Limfodynamic and Composition of Lymph / S.T. Tuleuhanov; N.T. Ablayhanova; S.A. Sharipova; B.K. Dinistanova; Z. Mansurov |
| Application of a Mixture of Oxidized Multi-Walled Carbon Nanotubes and D-(-)-Tartaric Acid-Impregnated Silica Gel as Stationary Phases for Thin-Layer Chromatographic Enantioseparation / Zhi Guang Peng; Dong Hong Yin; Jian Fu Liu; Jin Gang Yu; Xiao Na Yang; Dong Ming Zeng |
| Application of Nano-Materials in Sports Engineering / Zhi Qiang Song; Yun Tao Cai |
| Effects of Retained Austenite Stability on Mechanical Properties of High Strength TRIP Steel / Zhi Feng Li; Ren Yu Fu; Qing Shan Li |
| Effects of Normalizing and Tempering Temperature on Mechanical Properties and Microstructure of Low Alloy Wear Resistant Steel Casting / Zhi Jun Hu; Yi Tao Yang |
| Microstructure and Mechanical Properties of New Type Bainitic Carburized Steel for Gear / Zhi Xue Liu; Ju Qiang Cheng |
| Effect of Tempering Temperature on Microstructure and Properties of Cold Deformed Low Carbon Bainitic Steel |
| Influence of Peeling Rates in the Nominal Bonding Strength between the Fabricated Composite and Stainless Steel Thin Film / Sheet / Guo Ning Liu; Hua Dong Zhao; Qian Qian Guo; Li Xin Wang; Sheng Gang Ma |
| Study on Elevated Temperature Impact Properties of 20MnSiV Steel / Da Yong You; Yin Lan Bai |
| Study on Austenitic Grain Growth for Heat Resisting Steel P91 / Xiu Ping Yan; Zhang Jian; Xu Ma |
| Observation and Analysis of the Microstructures of IGF Refined Low Carbon Microalloyed Non-Tempered Steel / Shu Hua Wang; Hai Ou Jing; Le Jin; Yan Xue |
| Effect of Intercritical Quenching Temperature on the Microstructure and Performance of 650 MPa Low-Carbon Structural Steel / Hai He Luo; De Hui Zou; Han Xiong Dong; Zhong Bo Dong |
| Relationships between Fatigue Mechanical Properties and Roughness of Fatigue Fracture about 16MnR Steel after High Temperature / An Zhong Liu; Su Zhang |
| Effects of Controlled Rolling and Controlled Cooling on the Mechanical Properties of 550MPa Grade Engineering Mechanism Steel / Tao Xiong; Yi Xiao; Shi Sen Wang; Han Xiong Dong; De Fa Li |
| Influence of Heat Treatment on Mechanical Properties and Microstructure of Mining Machinery Steel Plate Containing Molybdenum and Niobium / Xian Jun Wang; Qing Feng Ding; Wen Bin Liu |
| Analysis on the Cause for Fracture Lamination of 10CrNiCu Steel / Wei Chen; Cong Mao Zhu; Xiang Yan; Wu Qun Liu; Yong Tao Fu |
| Study on Sulfur Control Technology for Non-Oriented Electrical Steel / Jian Hua Zeng; Hong Pan; Yuan Chao Feng; Min Zhang; Shen Xiang Yang; Li Gang Li |
| On the Presence of Eta Carbide in the Cryogenically Treated High Speed Steel / Chandrashekhar Gogte; Dilip Peshwe; Ravindra Paretkar |
| Analysis and Practical Application of Extracting Vanadium from Hot Metal in Steel Ladle / Jie Qin; Gong Guo Liu; Zhan Jun Li; Jian Ling Qi |
| Methodical Basis of Investigation of Influence of the Iron Ore Materials and Coke Metallurgical Characteristics on the Blast Furnace Smelting Efficiency / Andrey N. Dmitriev; Galina Yu. Vitkina; Yu.A. Chesnokov |
| Effect of Ce on the Inclusions and Pitting Resistance of 2Cr13 Stainless Steel / Xiao Liu; Long Mei Wang |
| Effect of Two-Phase Region Quenching Temperature on Microstructure Evolution and Microhardness of HSLA100 Steel / X. Yan; G.F. Zhou; C.M. Zhu; J.S. Guan |
| Influence of Annealing Temperature on Microstructure and Properties of the Hot-Stamping Boron Steel / Kuan Hui Hu; Xiang Dong Liu; De Xin Tian; Guan Wen Feng; Fang Yi Sun |
| Research on Plastic Inclusions Control for Steel Cord / Liang Chen; Da De Zhang; Yong Chen |
| Research on the Effects of the Refining Treatment to the Properties of Dual-Phase Wear-Resistant Steel / Xing Gang Liu; Yue Wen Yu; Xu Pan; Shuai Zhang; Guo Zhi Zhang |
| Effect of Strain Rate on Dynamic Recrystallization Behavior for V Micro-Alloy High-Carbon Steel / An Chao Ren; Yu Ji; Gui Feng Zhou; Ze Xi Yuan |
| Effects of Spray Forming and Aging Treatment on the Microstructures and Hardness of H13 Tool Steel / Jin Xiang Zhang; He Bin Wang; Lin Lu; Jin Feng Huang; Hua Cui; Ji Shan Zhang |
| Effects of Quenching Medium on the Microstructures and Mechanical Properties of 42CrMo Steel / Jun Dan Chen; Shan Ping Lu |
| Effect of Welding Heat Cycle Peak Temperature and Heat Input on HAZ Grain Size of SMA490BW Corrosion Resistance Steel / Ming Yue Zhang; Yuan Nie; Qing Ying Wang; Hui Chen |
| Research on 304,321,316Lect. Stainless Steel Corrosion under the Calcinating Gas Atmosphere of Ammonium Paramolybdate / Chang Sen Luo; Hong Luo; Xi Yang He |
| Study on the Tensile and Impact Properties of 600MPa HSLA Steel at Different Temperature / Hai He Luo; Han Xiong Dong; Zhong Bo Dong |
| Mean Strain Effect on the Cyclic Stress-Strain Behavior of Steel Structure Materials Q235 / Yi Guo; Yun Rong Luo; Qing Yuan Wang |
| Effect of Antimony on the Structure, Texture and Magnetic Properties of High Efficiency Non-Oriented Electrical Steel / Na Li; Li Xiang; Pei Zhao |
| Dynamic Recrystallization of 18Ni(1700MPa) Maraging Steel During Hot Deformation / Fei Zhao; Yong Hai Ren; Yan Yan |
| Microstructure and Properties of Powder-Forged Steel / Biao Guo; Sui Cai Zhang; Chuan Shui Sun; Chang Chun Ge |
| Thermodynamic Characterization in Intercritical Annealing Process for Dual-Phases Steels / Fang Fang; Hui Wang; Yun Yang Yin; Cheng Jiang Lin |
| In Situ Production of (Fe,Cr)7C3 Particulate Bundles Reinforced Iron Matrix Composites / Jing Lai Tian; Fang Xia Ye; Li Sheng Zhong; Yun Hua Xu |
| Research on Test and Parameter Identification for Nonlinear Stiffness Characteristics of Leaf Spring / Yong Jie Lu; Shao Hua Li; Cui Yan Wang; Shuang Yan Li |
| A Measurement Method for Magnetic Property of the Non-Oriented Silicon Steels / Shun Bing Zhou; Da Jun Feng; Zhao Jun Deng |
| FEM Modeling and Validation of the Temperature Field in the Plasma Arc Bending of Laminated Clad Metal Sheets / Wen Qing Song; Jing Fu Chai; Wen Ji Xu |
| Effects of Continuous Annealing Process on Microstructures and Properties of C-Mn-Si Bearing Cold-Rolled TRIP Steel / Li Hui Wang; Di Tang; Hai Tao Jiang; Ji Bin Liu; Yu Chen |
| Optimization of CC Tail Bloom Operation / Hong Pan |
| Research on High Efficiency Blowing Technology of 200t BOF / Jun Chen; Da De Zhang; Yong Chen |
| Research on the Microstructure and Properties for Nb-Contained Cold-Rolling High Strength Steel Sheet / Yu Chen; Xiang Dong Liu; Li Hui Wang |
| Resistivity and Dielectric Measurements of Pb(Mn0.5 W0.5)O3 Ceramics with Guard Ring Electrode / Maung Maung Yin; Than Win Than; Yee Thein Pwint; Kyaw Soe Ko Ko |
| Effect of Nano-Nd2O3 on Sintering and Crystallization of Fused Quartz Ceramic Materials / Ying Lei Gu; Jing Long Bu; Li Xue Yu; Jun Xing Chen; Zhi Fa Wang |
| Pressureless Sintering of B4C Neutron Absorbing Material with Nano-Sized Rare-Earth Compounds Addition / Ru Bin Wei; Yu Jun Zhang; Hong Yu Gong; Xiao Jun Liu; Ya Zhen Jiang; Yu Jun Zhao |
| Study on the Synthesis of ZrAl3O3N and its Influencing Factors / Guang Na Wu; Rong Lin Wang; Bin Feng; Jing Long Bu |
| Research and Development of Nano-Micro Composite Gradient Self-Lubricating Ceramic Cutting Tools / Xiu Guo Xu; Chong Hai Xu; Bin Fang; Chun Lin Wang; Ming Dong Yi |
| Preparation of Glass-Ceramics Using Industrial Solid Wastes in China / Na Li; Dai Dong Guo; Shi Quan Liu |
| Effects of Sintering Time on Structure and Properties of 0.997(KNN-LS-BF)-0.003V2O5 Lead-Free Piezoelectric Ceramics / Hua Wang; Xia Zhai; Ji Wen Xu; Chang Lai Yuan; Min Hong Jinag |
| Biomorphic TiO2 Ceramics Prepared from Cotton Stalk / Qing Wang; Lin Zhang; Ya Hui Zhang |
| Influence of Mo Content on the Properties of TiC-Based Cermets / Neng Wei Wang; Yan Wei Tong; Min Xian Fang |
| Effect of TiN Addition on the Microstructure and Mechanical Properties of Ti(C, N)-Based Cermets / Hai Yan Lei; Ping Feng; Xiao Ming Zhang; Teng Biao Zheng |
| Effect of Pressure of Nitrogen Atmosphere on Microstructure and Mechanical Properties of Ti(C, N)-12WC-16Ni-4Mo2C Cermet / Teng Biao Zheng; Ping Feng; Hai Yan Lei |
| Numerical Simulation of Failure Process of VITA All-Ceramic Crowns / Cheng Fan; Geng Chen; Shan Shan Wang |
| Preparation, Characterization and Conductivity Studies of Li1.3M0.3Ti1.7(PO4)3 (M = Al, Cr and Fe) Glass-Ceramics / Mei Mei Zhang; Jian An Liu; Wen He |
| First-Principles Study on the Clean and Nb Doped TiO2(110)#947;-TiAl(111) Interfaces / Hui Nan Hao; Xu Wang; Fu He Wang |
| Numerical Simulation for Dynamic Recrystallization of Ti40 Alloy in Hot Compression by Finite Element Method / Xin Song; Ke Lu Wang; Xiao Bo Zhang; Shi Qiang Lu |
| Effects of Process Parameters on the Morphologies and Composition of Pulse Electrodeposition of Nickel-Rich Co-Ni Alloys / Ming Ming Yu; Hong You Li; Yi Wang |
| Effect of C6H4SO2NNaCO*2H2O on Microstructure and Electrochemical Properties of Electrodeposited La-Mg-Ni Alloys / Jin Yu; Jing Zhou; Li Wei Wang |
| Effect of Co-Doping on Electronic and Magnetic Properties in Ti2NiAl Heusler Alloy / Bo Wu; Xiu De Yang; Song Zhang |
| Evaluation of the Protection Effect on Copper with Different Sacrificial Anodes / Chong Bi Wang; Xiao Dong Kong; Zhi Qiang Tian |
| Research on Coupled Effects of Alloy Elements for Precipitation Strengthening to Rupture Life of Single Crystal Ni-Based Superalloys by RBF Networks / Xing Gang Liu; Xu Pan; Jin Guo Li; Yan Hui Wang; Shi Zhe Zhu; Yun Yang Pang |
| The Effect of Addition Mn on the Morphology of Fe-Rich Phase in the Al-1Fe Alloy / Guo Jun Yu; Ji Hua Peng |
| Connections of the Microstructure of the Fe-Al (25-33%wt.) with its Composition and Cooling Rate from the Liquid State / Oleg Y. Sheshukov; Valentina P. Ermakova; Larisa A. Marshuk; Valentina G. Smirnova; Vladimir V. Kataev |
| Preparation of Dispersion Strengthened Aluminum Alloy by High Energy Ball Milling / Hui Qin Cao; Ji Luo; Wei Wei Yang |
| Effect of Equal Channel Angular Pressing on Microstructure and Properties of AZ61-4Si Magnesium Alloy / Ping Wang; Fu Yin Han; Yong Sheng Wang; Lu Geng; Shao Feng Meng; Wei Liang |
| Microstructure and Mechanical Properties of Cu-Cr-Zr Alloy by Friction Stir Welding / Di Qiu He; Rui Lin Lai; Shao Hua Xu; Kun Yu Yang; Shao Yong Ye; Jian Wang; Jian Ming Zhu; Bin Su |
| Research on Precipitation Phenomenon of TiC and TiAl3 Particles in Aluminum Melt / Wan Wu Ding; Wen Jun Zhao; Tian Dong Xia |
| The Study of Properties of Cu-0.8Cr-0.2Zr Alloy Used as Contact Materials / Liu Cheng Hao; Li Juan Han; Ya Fei Li; Bao Zeng Li; Lu Ping Wang; Quan Min Zhang |
| Microstructure and Mechanical Properties of Eco-2024-T3 Aluminum Alloy / Seon Ho Kim; Kyu Sik Kim; Shae K. Kim; Young Ok Yoon; Kyu Sang Cho; Kee Ahn Lee |
| Manufacturing and High Temperature Mechanical Properties of Inconel 713C by Using Metal Injection Molding / Kyu Sik Kim; Kee Ahn Lee; Jong Ha Kim; Si Woo Park; Kyu Sang Cho |
| Parameters Affecting Dendrite Growth of Fe-C Alloy in a Forced Flow / Xun Feng Yuan; Yan Yang |
| DFT Study on Clusters Ni4-xFexP (x=0~4): A Theoretical Investigation on the Property of Amorphous Alloy Ni80-xFexP20 / Zhi Gang Fang; Hong Yan Ban; Yun Gao; Ting Ting Gu |
| Preparation and Water/Oil Repellency Properties of Waterborne Cationic Perfluorinated Polyacrylate / Xiao Wu Yang; Yi Ding Shen; Pei Zhi Li |
| Dynamic Absorption and Desorption Research of HPD722 Macroporous Resin for Flavonoids in Thlaspi arvense Linn Extract / Li Sheng Wang; Rong Kai Ma; Mei Peng; Xu Liu; Hua Yang; Xuan Hai Li |
| Effects of EVA-g-MAH on Mechanical Properties and Morphological Structure of TPU/PVC Blends / Gao Shuang Huang; Song Bai Lin; Qing Hai Zhang; Da Gang Li; Yun Long Li; Zhi Jie Geng |
| Synthesis and Characterization of a New Kind of UV-Curable Cyclohexanone-Formaldehyde Resins / Guang Yang; Xin Rong Zeng; Yi Wang; Yi Fu Zhang |
| Polyurethane Application in a Large-Scale LNG Tank / Huan Xin Cheng; Xiao Ling Luo |
| Study on Inhibition of Water Tree in XLPE Insulation Material / Feng Tian; Yue Chun Qiao; Yan Rong Ni; Chao Hua Su |
| Study the Influences of ZnEt2 on Ethylene Chain Transfer Polymerization / An Guo Xiao; Shi Biao Zhou; Qing Yun Zheng; You Ming Shen; Yong Bin Zhuan |
| An Orthogonal Experiment of Bagasse Cellulose Dissolution in Ionic Liquid by Microwave Heating / Dong Hui Han; Xiao Yi Wei; Ji Hua Li; Jia Cui Chen; Li Hong Cui; Yi Hong Wang; Chun Ying Ou |
| Time-Temperature-Stress Superposition Principle: Brief Description and Application to Polymer Creep Behavior / Yong Hua Li; Cheng Kai Jiang |
| Study on Layered Structure and Properties of PP/LLDPE Injection Molding / You Bing Li; Yan Pan; Wen Shi; Xu Ming Sheng; Bing Dai |
| Effect of Curing System on Morphological, Rheological, Thermal and Mechanical Properties of Thermoplastic Vulcanizates Based on Epoxidized Natural Rubber and Polypropylene / Hua Dong Wang; Rui Wang; Mao Fang Huang; Qi Yang |
| The Synthesis of Novel Oligomer 4,8-Di(4-hexyl-2-thienyl)-2#955;4#948;2-Benzo[1,2-c;4,5-c']bis[1,2,5]-Thiadiazole / Xiao Xiao Zhuang; Xiao Long Lei; Xiao Xia Sun |
| Study on Network of Epoxidized Natural Rubber with Different Epoxidation Degree: Measured by 1H-NMR / Tian Ming Gao; Hong Hai Huang; Pu Wang Li; Kui Xu; Mao Fang Huang |
| Study on Preparation for Super Absorbent Polymer Using Cotton Waste / Lei Tan; Zheng Qin Liu; Yang Yang Liu |
| Effects of Bagasse Fiber on Crystallization, Morphological and Mechanical Properties of Poly(Lactic acid) / Jun Cai; Nan Shi; Qiang Dou |
| Laboratory Research of the Terpolymer Fracturing Fluid Gelatinizer / Cheng Yu Zhou; Zheng Fu Jia; Xia Yang Hou; Xiao Ling Mou |
| Using Optical Image Real-Time Analysis Software to Characterize Polymer Processing / Guang Ming Xian; Jing Ping Qu; Ai Yi Huang |
| Study on Increasing Conversion of Styrene/Butadiene Co-Polymerization by Adjusting Basic Recipe / Yan Jiang Jin; Ben Xian Shen; Jun Sui; Lei Yang; Ji Gang Zhao |
| Synthesis and Characterization of a Novel Star-Shaped Polymers with Biological Compatibility via Ring-Opening Polymerization and Atom Transfer Radical Polymerization / Shi Biao Zhou; An Guo Xiao; Yuan Dao Chen; Yong Bing Zhuan; Yun Wang |
| The Preparation and Characterization of AM/2-EHA/VTEOS Copolymer as Profile Control Agent / Ming Tian; Yong Jun Xu |
| Synthesis and Properties of a Novel Cationic Polymer PTMAEPAC / Rui Xia Niu; Bo Lin Li; Biao Long |
| Technics and Properties of Plywood Manufacture with Modified Urea-Formaldehyde Resin / Xiao Mei Wang; Jian Zhang Li; Ji Zhi Zhang; Qiang Gao |
| MD Simulation of Crosslinked Epoxy Resin at Different Temperatures / Miao Zhang; Ping Yang |
| Large-Scale Molecular Dynamics Modeling of a-SiO2 / Ning Bo Liao |
| Parameter Optimization for Vibration Flow Field of Polystyrene Melts via RBF Neural Networks Combined with SALS / Guang Ming Xian; Jing Ping Qu; Bi Qing Zeng |
| The Synergistic Effect of Poly(Bisphenol phenyl dichlovophosphate) and Ammonium Polyphosphate in Flame Retardant ABS / Chong Peng; Yan Zhang; Hao Ran Wang |
| Crystallization, Morphology and Mechanical Properties of PLA/PBAT/CaCO3 Composites / Nan Shi; Jun Cai; Qiang Dou |
| Miscibility and Thermal Properties of Bacterial Poly(3-Hydroxybutyrate-co-3-hydroxyhexanoate)/Poly(Ethylene oxide) Blends / Chang Kun Ding; Bo Wen Cheng; Qiong Wu |
| Effect on Polymer Chain Structure Caused by the Molar Fraction of 4-Hydroxybutyrate in Poly(3-hydroxybutyrate- co -4-hydroxybutyrate) / Zhi Qiang Li; Mei Li; Wei Jia Fan |
| Flocculation Effects of Hydrophobically Modified Polyacrylamides for Tailing Slurry / Da Ping Wu; Li Na Zhu; Yan Lin Sun |
| Indomethacin Molecular Imprinted Polymer Preparation, Characterization of Application / Zhi Dou Tan |
| The Effect of Poly(Ethylene succinate) on Mechanical Property of PLLA/PES Composite in the In Vitro Degradation Process / Xin Fan; Qi Yuan Chen |
| Study on Properties of Sulfonate Hyperbranched Polymer Surfactant / Xue Chuan Wang; Xin Miao Li; Tao Tao Qiang |
| The Effect of Thermal Aging on Properties of Epoxy Resin / Wei Fan; Jia Lu Li |
| Wood Plastic Composites Prepared from Poly(Vinyl Chloride) and Balau Sawdust (Shorea obtusa): Mechanical Properties and N-(#946;-aminoethyl)-#947;-aminopropyl trimethoxysilane Compatibilization / Nawadon Petchwattana; Sirijutaratana Covavisaruch; Kamolrat Kanawang |
| Terahertz Characteristics of Two Dimensional Photonic Crystal Cavity Based on 3D Finite-Difference Time-Domain Method / Wen Chao Li; Tao Tao; Yu Chao Sun |
| Elastomechanical Study of Magnetoeletric Coupling in Bilayer of Lithium Zinc Ferrite and Lead Zirconate Titanate / Hong Xia Cao; Chuang Zhang; Qing Quan Liu; You Bao Wang |
| Luminescence Properties of Tm3+ /Dy3+ Co-Doped Zinc-Aluminum Phosphate Glasses for White LED / C.T. Lin; S.W. Yung; J. Lin; W.S. Chen; C.H. Lai; Y.M. Lee; J.S. Lin |
| Characteristics of Photonic Crystals on the Total Reflection Tunneling with Material Absorption / Chang De Peng; Qi Neng Liu; Qi Wen Peng; Jin Song Liu |
| Research of Fiber Radar Absorbing Materials / Sai Nan Wei; Rui Zhou Li; Li Chen; Ji Ming Yao |
| Research on Particle Size and Luminescence Properties of GdBaB9O16: Eu3+Phosphor Prepared by Sol-Gel Method / Ying Xie; Lin Jiu Xiao; Yong Jie Chen; Wen Ze Li; Xiu Juan Geng |
| Fuzzy Ball Drilling Fluids for CBM in the Ordos Basin of China / Zuo Chen Li; Zhi Heng Zhang; Liang Zhan; Jia Rong Cai |
| Investigation and Evaluation on the Moisture-Absorption and Quick-Drying Properties of Stitch-Bonded Nonwoven Fabrics with Hemp/Polyester Blended Used in Shoe's Lining / Xin Hao; Xin Min Hao; Jian Chun Zhang; Hong Wei Li; Gun Jun Zhang; Fei Wang; Yuan Yang |
| Thermodynamic Study of Crystal Growth Behavior Based on Structural Analysis of Chemical Bonds / Xu Zhang; Hua Xie |
| Influence of Pressure of Electron Gas on Elastic Property of Metal / Li Jun He |
| Theoretical Study on the Interaction between Shuffle 60° Dislocation and Hexavacancy in Silicon / Kang You Zhong; Qing Yuan Meng; Zhi Fu Yang |
| Electronic Structures and Spectral Properties of the Optoelectronic Material Rhenium (I) Tricarbonyl Complexes Containing Spiro[Dipyridine-Fluorene]-Type Ligands / Hong Ying Xia; Feng Zhao |
| Adsorption of Methane on Pristine and Al-Doped Graphene: A Comparative Study via First-Principles Calculation / Wei Zhao; Qing Yuan Meng |
| Characteristic of the Pigments in Castanea mollissina Shell / Jing Hua Qi; Yuan Shi; Feng Tan; Fang Wang; Mei Xia Pang; Yang Xu; Xin Xin Yi |
| A New Methodology to Predict Energy Bandgaps in GaxIn1-xAsyP1-y Compounds by ANFIS Theories / Shen Li Chen; Der Ann Fann |
| Time-Dependent Density Functional Theory Studies of Plasmons in Parallel Double Sodium Atomic Chains / Bao Ji Wang; San Huang Ke |
| Studies on Extraction Equilibrium of Rare Earths in Ion Liquid Extraction System Using 1-Butyl-3-Methyl-Imidazolium Hexafluorophosphate and 1-Phenyl-3-Methyl-4-Benzoyl-Pyrazolone-5 / Zhong Wei Pan; Jin Huo Lin; Wen Jie Li; Tian Ci Wu; Jin Ding Pan |
| Efficient Synthesis, Properties of a Novel Unsymmetrical Photochromic Diarylethene Based on Trifluoromethy Group and Formyl Group / Gang Liu; Long Liang; Duo Hua Jiang |
| Photoinduced Fluorescence Switching of a New Diarylethene and its Application in Optical Recording Storage / Cong Bin Fan; Luo Han Zhang; Tao Feng Wang; Gang Liu |
| Synthesis, Properties and Application of a Photochromic Diarylethene with a Dithiolane Unit / Wei Jun Liu; Hai Bo Wang; Shou Zhi Pu |
| Synthesize, Photochromic and Application for Optical Recording of Diarylthene Bearing Naphthyl Unit / Shi Qiang Cui; Min Deng; Ren Jie Wang; Gang Liu |
| The Composite Catalysts Used for Cotton Denim Resin Wrinkles Setting / Ji Ming Yao; Sai Nan Wei |
| Decomposition of Organic Dye in Water through a Heterogeneous Fenton Process Catalyzed by Fe (III)-Grafted PTFE Fiber Complex / Zhi Zhong Ding; Yong Chun Dong |
| Microwave-Hydrothermal Synthesis and Characterization of Graphene / Zhen Hui Xiao; Shui Sheng Wu; Yan Lin Sun; Yu Lin Zhao; Ya Ming Wang |
| Synthesis of Porous NiMo Sulphide Act as HDS Catalyst by Alcohol Supercritical Drying Technique / Ning Li; Yong Ming Chai; Chang Long Yin; Chen Guang Liu |
| Analysis of Marking Glass with Different Process Parameters Based on Super-Pulsed Laser / Xin Ming Zhang; Jing Qi Ma; Yun Feng Ding |
| Experimental Research on Foamed Concrete Block with High Addition Crushed Brick Powder / Xue Wang; Yuan Chen Guo |
| Fresh Properties of Self-Compacting Concrete with Coarse Recycled Aggregate / Wai Ching Tang |
| The Adaptability Analysis of Cold Regenerated Structure Layer / Yong Bing Wang; Guo Qiang Ying; Jian Lin Hu; Hua Wei Wei; Qian Zhang |
| Cooperative Performance of Sandwich Insulation Walls With Expanded Polystyrene Under Static Loads / De Ling Wang; Zhong Li |
| Effects of Hydrogen Evolution During ECE on the Bond Strength between Steel and Concrete / Chun Lin Deng; Yun Xu; Jian Bo Xiong; Sheng Nian Wang |
| Application of SHS-Refractories during Limestone Furnace Refurbishment / Sergey M. Fomenko; E.E. Dilmukhambetov; Zulhair A. Mansurov; Zhanibek A. Korkembai; Aleksandr F. Reshetnyak |
| Effect of Curing Method on the Strength Development and Freezing-Thawing Durability of the Concrete Incorporating High Volume Blast-Furnace Slag Subjected to Initial Frost Damage / Kyung Taek Koh; Gum Sung Ryu; Jang Hwa Lee |
| Optimum Mixture Ratio of Cement and Red Mud Stabilized Graded Crushed Stones Based on Grey Situation Decision / Xu Liang; Wei Yu |
| Effect of Quartz Powder on the Strength and Shrinkage of Alkali-Activated Slag Cement / Xue Lian Yuan; Yong Hao Fang; Ya Min Gu |
| The Influence of Temperature Sensitivity of Cold Recycling Materials on the Pavement Structure Mechanical State / Hao Zhou; Gui Xia Zhang; Gao Feng Sun; Chu Li |
| Development of New Type Cementitious Materials Using as Road Base / Dong Mei Chen; Ri Hua Zhang; Zhan Guo Zhao |
| A Study of Relationship Between Residual Asphalt in Aggregate Surface and Aging Degree of its Asphalt / Wen Tsung Liu; Ming Ho Tu |
| Damage Pattern Recognition of Refractory Materials Based on k-Means Clustering Analysis / Xi Li; Zhi Gang Wang; Chang Ming Liu; Bing Qiang Han |
| Evaluation of Burning Performance of the Traditional Organic Insulation Materials for External Wall of Buildings / Xiang Zhang; Fan Zhang; Chao Lu Yin; Yun Song Luo; Shi Ying Lin; Shao Juan Zhang |
| Full-Scale Fire Testing of the Traditional Organic Insulation Materials for External Wall of Buildings |
| Microstructure of Autoclaved Aerated Concrete Hydration Products in Different Water-to-Binder Ratio and Different Autoclaved System / Zhao Ming Huang; Yu Fei Yuan; Ze Jie Chen; Zi Yun Wen |
| Bond Characteristics between ECC (Engineered Cementitious Composites) and GFRP Rebars / Yun Cheol Choi |
| Study on Influence Factors of High Temperature and Water Stability of Stone Matrix Asphalt / Van Thanh Dang; Pei Feng Cheng |
| Releasing Behavior of Chloride Ions in Marine Sands under Cement Environment / Jian Chao Zhang; Chi Chen; Yang Yang Ye; Feng Xing; Bi Qin Dong |
| Development of Hydrogen Consumption Test Platform for Fuel Cell Vehicles / Ying Tian; Yu Fei Zhang; Zhen Hua Jin; Ke Li Wang; Sheng Fang Nie; Qing Chun Lu |
| Application of the Fuel Cell in the Hybrid-Electric Vehicle / Hai Gang Zhang; Xiao Bin Li; Wei Guo Qian |
| Modeling and Simulation of the Ni-Mh Battery |
| Optimization of the Synthesis Conditions of LiMnPO4 for Lithium Secondary Battery by Solid State Method / You Rong Wang; Han Tao Liao; Jia Wang; Yu Chan Zhu; Si Qing Cheng |
| Preparation of High Performance Silicon/Carbon Anode Materials for Lithium Ion Battery by High Energy Ball Milling / Ling Long Kong; Jie Zhao; Zhi Yuan Wang; Lei Li; Ning Xu; Xu Ma |
| Influence of TiO2 and Bio-Solution Based Additives on Exhaust Emissions of a DI Diesel Engine / Karoon Fangsuwannarak; Kittichai Triratanasirichai |
| Experimental Study on NO Emission Characteristics of Corn Stalk Combustion in O2/CO2 and O2/N2 Atmospheres / Wen Yong Liu; Xiang Gou; Lian Sheng Liu; Kai Zhang; Jin Xiang Wu; En Yu Wang |
| Performance Analysis of Single Stage Compression Cycle with a Throttle Valve, an Expander and an Internal Heat Exchanger / Jing Rui Tian; Hong Li Wang |
| Performance Analysis of Single Stage Compression Cycle with an Internal Heat Exchanger / Hong Li Wang; Hui Qin Liu; Qi Long Tang; Ning Jia |
| Research on Characteristics of Ethanol Gasoline Evaporative Emission / Guo Zhong Jia; Gui Ling Qiao; Zong Tian Yang |
| The Feasible Research on Solar Landscape Column / Jian Liu; Kai Shang |
| Resourceful Treatment of Dioscorea zingiberensis Wastewater Using a Double-Chamber Microbial Fuel Cell / Hui Li; Zheng Fang |
| Preparation and Performance of Myristic Acid/Silicon Dioxide Composites as Thermal Energy Storage Materials / Qi Song Shi; Kui Long Liu |
| The Simulation of Hydraulic Free Piston Engine Fueled with DME in HCCI Mode / Xiao Long Li; Yang Wang; Tao Xu; Fei Yu Song; Ya Jun He; Bin Hong |
| Special Crude Oil Processing Research and Application of XinMu Oil Field / Qing Wang Liu; Yong An Wang; Zhen Zhong Fan |
| Study on Purification of Solar Grade Polysilicon / Jian Xiu Liu; Hui Qiu |
| Experiment and Research on the Waste Tire Rubber in the Whole Sugarcane Harvester / Zhong Hua Shen; Shang Ping Li; Fang Lan Ma; Hai Liu; Yong Jian Wang |
| Preparation and Characterization on an Environment Friendly Used Rubber Powder Modified Pulp Sediments Composites / Wei Li Wu; Jing Zhang |
| Extraction of Scandium from Red Mud Using ELM with P204 as Carrier / Cui Zhen Wang; Guang Zhu Zhou; Zi Long Zheng |
| The Preparation of Composite Zeolite Filter / Miao Wan Li; Yan Zhen Yu; Long Long Gao |
| Research on Utilizing Environmental Friendly Materials of Barrier Board for Particle Reduction of High-Turbidity Raw Water / Jian Liang Chen; Yi Kuo Chang; Yun Hwei Shen; Kun Liao Chen; Wun Jiun Guo |
| Methods of Improving the Interfacial Compatibility of the Bamboo Fiber/Thermoplastic / Wen Yan Li; Hai Tao Cheng; Shuang Bao Zhang |
| Mung Bean Germination and Three Different Food Waste Composting Processes / Kun Liao Chen; Jian Liang Chen; Yun Hwei Shen; Wun Jiun Guo |
| Review on Membrane Technologies for Carbon Dioxide Capture from Power Plant Flue Gas / Yue Xia Lv; Gui Huan Yan; Chong Qing Xu; Min Xu; Liang Sun |
| Environmental and Economic Analysis of Valve Regulated Lead-Acid Batteries Recycling Process / Dong Mei Li; Yuan Li; Yang Guo; Guang Jin Zhao; Yong Wei Wang |
| Environmentally Friendly Materials: Aerobic Composting of Kitchen Waste |
| Synthesis and Adsorption Property of Graphite Oxide Modified GF/EPDM Foamed Composite / Xiu Qi Liu; He Qin Xing; Li Li Zhao; Dan Wang |
| Preparation and Adsorption Performance of GF/EPDM/LLDPE Foaming Composite for Petrol |
| Study of Environmentally Friendly Phosphate-Bonded No-Bake Sand / Dan He; Lu Xia; Jin Huang; You Shou Zhang |
| The Status of Nonylphenol Pollution in Lotic Ecosys-Tem / Jing Lan Wang; Xi Feng Yan; Liu Feng; Dao Nan Liu |
| The Experimental Study of Contaminant Removal in Water Quenched Slag Biological Aerated Filter (BAF) / Long Long Gao; Yan Zhen Yu; Miao Wan Li; Yu Xing Zhou; Hua Dong Zhang |
| Development and Prospect of Al Scraps Reproduction Technology in China / De Qin Sun |
| Studies on Bending Limitations for the Optimal Fit of Orthopaedic Bone Plates / Javad Malekani; Beat Schmutz; Prasad Gudimetla; Yuan Tong Gu; Michael Schuetz; Prasad Yarlagadda |
| Preparation and Characterization of Immobilized #945;-Amylase / Zhi Jie Geng; Song Bai Lin; Gao Shuang Huang; Ai Ru Ke |
| Production of Biodegradable Board Using Corn Straw and its Mechanical Properties / Ting Ting Wu; Xiu Lun Wang; Koji Kito |
| Wound Healing Activity of Carbonized Rice Husk / Nuraly Akimbekov; Zulhair A. Mansurov; J. Jandosov; Ilya E. Digel; Mathias Gossmann; Gerhard M. #1040;rtmann; Aysegul Temiz Artmann; Azhar A. Zhubanova |
| Effect of Heating Treatment of Fresh Rice Bran on Stabilization / Zhu Gong; Guo Ping Yu; Chao Ran Dou; Man Xu Xu |
| Freeze-Thaw Stability of Oil-in-Water Prepared with Soy Protein Isolate-Maltodextrin Conjugates / Guo Ping Yu; Chao Ran Dou; Yan Song; Hao Wu; Zhu Gong |
| A Study on Adsorption Ammonia Nitrogen of Diatomite Modified by Microwave / Zhi Wen Luo; Zhong Chen; Su Hong Liu |
| Preparation of Vitamin C Dripping Pill and its Quality Evaluation / Xiao Lin Xu; Qing Zhu; Tian Ze Bian; Ke Hai Liu |
| Pore Size Gradient Hydroxyapatite Scaffolds with Interconnected Pores Fabricated by a Template Method / Yu Fei Tang; Kang Zhao; Long Hu |
| Extraction of Elopichthys bambusa Oil with Various Methods / Cui Ping Yi; Chun Mei Zhong; Jian Guo Xiang; Yong Fa Chen; Rui Xing Liu |
| Study on the Biodegradability of Protein Fibers and Their Products in Activated Sludge / Xiao Ying Zhang; Jian Tao Niu; Qi Lei Tian |
| Study of the Catalytic Effects of Trace Titanium on Oxidation of Pyronin B with Hydrogen Peroxide and its Application / Zhi Rong Zhou; Li Zhen Zhang |
| Preparation and Property Evaluation of Anionic Clean Fracturing Fluid / Guan Jun Liu; Xiao Rui Li; Li Jun Zheng |
| Effects of Hydrolysis Parameters on TiO2 White Pigment from Low Concentration Industrial TiOSO4 Solution via Sulfate Process / Cong Xue Tian |
| MFR High Temperature Profile Control Agent Experimental Evaluation / Zhen Zhong Fan; Li Feng Zhang; Qing Wang Liu |
| Influences of Hydrolysis Temperature and Hydrolysis Time on Titanium White Pigment via Short Sulfate Process / Cong Xue Tian; Shuang Hua Huang; Ying Yang |
| The New Synthesis of Organic Light-Emitting Material BHBT Monomer by Stille Coupling |
| Removal of Chemical Oxygen Demand in Tannery Effluent by Flocculant / Qin Huan Yang; Chang Qing Zhao |
| Improved Synthesis of 3,3-Dimethyl-4-Pentenoic Acid Methyl Ester / Yan Fang Liao; Hui Qun Yu; You Bin Mo; Hai Zhou; Chu He Peng |
| Synthesis and Characterization of Comb-Type Grafted Hydrogels / Ping Zhang; Shi Pu Li; Xin Yu Wang; Hong Lian Dai |
| Morphology and Release Profile of Microcapsules Encapsulated Alpha-Pinene by Complex Coacervation / Dan Wang; De Fu Chi |
| Kinetic Spectrophotometric Method for the Determination of Trace Ruthenium(III) by its Catalytic Effect on the Oxidation of Dibromo Caboxy Arsenazo with Bromate in Cationic Micellar Media |
| Preparation of Carbon Source Doped in Polymer-Cement Filter and Research on Characteristic of Denitrification / Chun Bo Bi; Jian Guang Lin; Hai Yan Zhao |
| Simulation on Application of Dividing Wall Column in Aniline Distillation / Er Qiang Wang; Zeng Xi Li; Cheng Yue Li |
| Study on Synthesis of High Performance Emulsion of Paper Sizing Agent under Microwave Radiation / Jian Chen; Fu Jie Yang; Hong Xiang Zhu; Yong Hong Li; Shuang Fei Wang |
| Study on Gas Control in Coal Mine by Methanotrophic Bacteria M02 / Jian Xin Tang; Fei Mao; Ze Jing Guo; Jiao Jiao Peng |
| Analysis of Volatile Compounds in Flowers of Akebia trifoliata by Headspace Solid-Phase Microextraction Coupled to Gas Chromatography-Mass Spectrometry / Ting Xiao; Le Wang; Ting Liu; Ai Nong Yu; Xiao Hong Yang |
| Numerical Study on Formation Mechanism and Reduction Methods of NOx in Methane/Oxygen-Enriched Air Diffusion Flame / Yao Xun Feng; Xiao Feng Zheng; Ming Sheng Jia |
| Study on Property of Acid-Modified Kudzu Starch / Yan Ping Li; Si Qing Dong; Hong Bo Tang; Ling Guo Wang |
| Study on White Mud Calcium Carbonate's Crystallization Character in Causticization Process of Straw Pulping / Ping Zhang; Xin Xing Xia; Feng Liu |
| Research on Preparing Lithium Carbonate by Carbonation from Lithium Chloride in Biphase System / Chang Qing Wang |
| Preparation and Characterization of Sodium Hexatitanate Whiskers / Xiao Yu Zhang; Yu Jun Zhang; Hong Yu Gong; Yun Na Song |
| Experiment and Micro-Mechanism Research of Fe2O3 Catalysis in Flue Gas Desulphurization in Magnetically Fluidized Bed / Yun Feng Zhang; Jian Jun An; Zheng Rong Chang |
| Synthesis of AM-co-NVP and Thermal Stability in Hostile Saline Solution / Rui Liu; Wan Fen Pu; Qin Peng; Feng Sheng Yao |
| Template Synthesis to Fabrication of 3D Ordered Hierarchical Materials / Ren Chun Yang; Feng Yun Ma; Ding Xing Tang |
| The Oxidation Erosion in Carbon Materials for CZ Furnace / Wei Zhao; Bo Zhu; Yang Chen; Qiang Wang; Kun Qiao; Yi Min Wu |
| Study on Simulation of Nitrobenzene Distillation Using Dividing Wall Column / Er Qiang Wang; Jin Cheng Huang; Yu Jian He; Cheng Yue Li |
| Study on the Preparation of Calcium Sulfate Whisker by Hydrothermal Method / Kang Bi Luo; Hu Ping Li; Yan Xia Tan |
| Synthesis of Several Sugar Acetates and their Structures Characterization / Jing Liang; Zhen Xing Cheng; Lian Yuan Wang; Hai Yan Zhu; Shi Gao; Xiao Ping Zhang |
| Investigation of Low-Cost Copper Interconnection Cleaning Using Hydrogen Radicals Generated by Heated Catalyst / Y. Kumashiro; S. Ikeda; Akira Izumi |
| Study on Preparation of Modified Ti-Based Lead Dioxide Electrode and Degraded Methylene Blue / Xue Jun Zhu; Jun Deng; Fang Ming Gou |
| The Plasma Electrolytic Oxidation Process in K2ZrF6 with Na2HPO4 Electrolyte / Shi Kui Wu; Li Wang |
| The Purification and Analysis of 6 - Hydroxy -2 - Naphthoic Acid / Yuan Jun Song; Chun Zhang; Jing Jing Li |
| Effect of Substrate Temperature on the Opto-Electrical Propertites of Ti Doped ITO Films Deposited by RF Magnetron Sputtering / Rui Xin Ma; Shi Na Li; Guo Quan Suo |
| Effects of Substrate Temperature on Structure and Properties of Al-F Co-doped ZnO Thin Films |
| Influence of Deposition Time on the Properties of Highly-Oriented SnS Thin Films Prepared Using the Thermal Evaporation Method / Patrick. A. Nwofe; K. T. Ramakrishna Reddy; Robert W. Miles |
| Synthesis and Photocatalytic Properties of TiO2 Film with Hierarchical Structure Prepared by Sol-Gel Method / Mi Na Guli; Jian Xi Yao; Hong Xing Tian; Wang Ping Rao; Jing Yong Zhao |
| Point Defect States of Phononic Crystal Thin Plates - An Application of Finite Element Method / Zong Jian Yao; Gui Lan Yu; Yue Sheng Wang |
| Ni-Doping Effect on the Structural and Optical Properties of Sprayed ZnO Thin Films / M. Rajendraprasad Reddy; Mutsumi Sugiyama; K. T. Ramakrishna Reddy |
| Thermal Effects Induced by Absorbing Inclusions in Laser Optical Films / Cai Hua Huang; Xiao Hua Sun; Yi Hua Sun; Jun Zou |
| Investigation of Co-Sputtered Amorphous NbxSi1#8722;x Films Properties for Junction Barrier / Wen Hui Cao; Jin Jin Li; Qing Zhong; Xiao Wei Guo; Qing He; Zong Tao Chi |
| Influence of Laser-Conditioning on Laser-Induced Damage Properties of ZnSe Thin Films / Feng Zou; Jun Qi Xun; Jun Hong Su; Jian Bo Ma |
| Experimental Study on Dynamic Measurement of ELID Oxidation Film Thickness Based on LabVIEW / Bao Ji Ma; Yu Lian |
| Investigation of Microstructure, Electrical and Decorative Properties of WO3 Film by PVD Magnetron Sputtering with Ar/O2 / Tao Liang Chuang; Chien Lung Huang; Yu Jia Gao; Chen Yu Hua |
| Temperature Dependence of Raman Scattering in M-Plane GaN with Varying III/V Ratios / Cheng Chen; Xiang Ping Shu; Hua Yang Sun; Zhi Ren Qiu; Ting Wei Liang; Li Wei Tu; Zhe Chuan Feng |
| Simulation of the Growth, Structure and Crystallization of the Amorphous Silicon Thin Film / Shi Wei Ren; Jing Wei Sun; Yan Zhong Hao |
| Effects of Annealing Temperature on Structure and Properties of PLBZT Ferroelectric Thin Films Synthesized by Sol-Gel Processing / Hua Wang; Li Liu; Ji Wen Xu; Ling Yang; Shang Ju Zhou |
| Chemical Structure of Fluorocarbon Films Deposited by Pulsed Plasma Thruster / Rui Zhang; Bing Li; Dai Xian Zhang; Fan Zhang; Jian Jun Wu |
| Research of Preparation and Etching of PS Microspheres Film / Dong Sheng Peng; Zhi Gang Chen; Cong Cong Tan |
| Effect of Annealing Temperature on Structural and Electrical Properties of Bismuth Ferrite Thin Film / Min Fang Zhang; Jing Song Liu |
| Chitin Nanofibers / Epoxy Resin Optically Transparent Nanocomposite Films / Xu Shao; Da Gang Li; Ai Jun Li; Wen Biao Gu |
| Fabrication of Polyelectrolyte/TiO2 Hybrid Membrane via a Simple Method and Characterization of its Thermal Behavior / Shu Jun Liang; Shi Ping Zhu |
| A Simple Model for Mechanical Behavior of PET Thin Film Deposited with Pure Aluminum on Both Surfaces and the Experimental Study / Guo Ning Liu; Hua Dong Zhao; Qian Qian Guo; Sheng Gang Ma |
| Study on Properties of Dye-Sensitized TiO2 Films / Wei Cong; Jiang Li; En Xiang Han |
| Research on Property of Polyvinyl Alcohol Sustained-Release Film / Xi Hai Hao; Ying Zhe Xiao |
| Influence of Annealing Time on the Properties of GZO Thin Films Fabricated by Direct Current Magnetron Sputtered / Xia Wu; Hui Dong Yang; Ji Sen Zhang; Long Gu |
| Packaging Films of Modified Polyethylene by Nano SiO2-EVA / Wen Cai Xu; Dong Li Li; Ya Bo Fu; Wei Shang |
| Effect of Laminar Flow to Velocity Exponent of Viscous Damper / Wei Ning Wang; Wei Ming Yan; Yan Jiang Chen |
| Influence of Silicon Content on Microstructure and Damping Capacity of Fe-Cr Based Damping Alloy / Feng Yi; Xue Yong Yu |
| Numerical Study of Stone Column Reinforced Composite Foundation of Highway under Static and Seismic Load / Min Min Jiang; Shang Yu Han; Hong Li |
| Liquefaction Analysis of Large Diameter Long Pile Foundation in Medium Dense Sand under Earthquake Based on Finite Difference Method / Min Min Jiang; Zhao Ran Xiao; Shang Yu Han |
| Research about Efficiency of Seismic Mitigation for FPS-TMD System / Nan Ge; Hai Bin Chen; Yue Wu |
| Analysis about Isolation Floor Consisting of FPS System and Dish Spring / Nan Ge; Hai Bin Chen; Li Ting Yao |
| Influence of the Strain Hardening of HDRBs in the Evaluation of the Seismic Response of a RC Base Isolated Structure / Donato Cancellara; Fabio de Angelis; Mario Pasquino |
| Assessment of the Seismic Vulnerability of Existing RC Buildings and Effect of the Irregular Position of the Masonry Panels on the Fragile Collapse Mechanisms / Donato Cancellara; Fabio de Angelis; Vittorio Pasquino |
| Behaviour of Shearwalls with Slabs and Openings / Yun Cheul Choi; Hyun Ki Choi; Chang Sik Choi |
| Study on the Grouting Reinforcement and Stability of a Tailings Initial Dam / Guang Jin Wang; Xiang Yun Kong; Qiang Liang; Yue Tong Si |
| Retrofitting Options for Un-Reinforced Brick Wall Subjected to Impact Load / Norazman Mohamad Nor; Mohd Azizul Mohd Noor; Muhamed Alias Yusof; Ahmad Mujahid Ahmad Zaidi; Shohaimi Abdullah |
| Seismic Performance of a Multi-Story Composite Frame with Partial Shear Interaction and Partial Strength Joints / Marco Valente |
| Seismic Strengthening of Non-Ductile R/C Structures Using Infill Wall or Ductile Steel Bracing |
| Study on Sealing Technology for Micro-Arc Oxidation Ceramic Coatings of Aluminium / Shi Jie Li; Pan Pan Li; Xiao Ming Cao; Ming Wen |
| Analysis on Functionally Graded Material Coating Interface Crack / Bo He; Chang Qing Sun |
| Investigation of Surface Roughness in Hardened GCr15 Steel Turning with Mixed Ceramic Insert / Bo Di Cui |
| Densification and Purification of Cold Sprayed Ti Coating Layer by Using Annealing in Different Heat Treatment Environments / Ji Sang Yu; Hyung Jun Kim; Ik Hyun Oh; Kee Ahn Lee |
| Repair Technology of Shafts in Boats and Ships / Li Rong Huang; Zheng Zheng He; Zheng Liu |
| Structure and Properties of Ti/TiN/Sb-SnO2 Electrodes with Plasma Sprayed TiN Interlayer / Xiao Wen Wu; Jian Xin Zhang; Yang Wang; Amin Huang |
| Paper and Board Pigment Coating Raw Materials - A Review of some Recent Innovative Novelties / Na Xiao; Jun Wen Pu |
| Determination of Coated Substrate Roughness by Quantification of Measured Depth Profiles / Xiao Yin Wang; Wei Jian; Yi Liu; Shao Ping Rao; Xing Xing Zhu; Yi Shan Han; Jiang Yong Wang |
| Preparation of Glass-Ceramics of Li2O-Al2O3-ZnO-SiO2 System Coating Toughed by ZrO2 Basic on Metal Substrate / Bao Liang Xu; En Ze Wang; Wei Gong; Xiaoan Yue |
| The Progress and Development Direction of Adding Ball Methods / Qing Fei Xiao; Xiong Tong; Fu Kun Yan |
| Research on Micro-Structure of Electroless Ni-B Coatings / Jian Xin Pan; Ru Jun Chen; Cui Lan Wu |
| A Comparative Study: Effects of Two Different Surface Engineering Technologies on Tribological Properties of Pure Titanium / Yu Tong; Tian Wen Guo; Jing Wang; Hai Feng Liang; Qian Mi |
| Improvement and Sensitivity Analysis of Placement Angle Optimization in Physical Vapor Deposition Process / Temsiri Sapsaman; Sasithon Bland |
| Hydrophilic/Hydrophobic Behavior on Ti Foil Surface Prepared by Anodization / Y. C. Liang; C.H Xu; Yu Fei You; M. Y. Tian; J. Chen; H. P. Zhang |
| Fabrication and Properties of Cu-Cr Coatings on the Inner Wall of Steel Pipe by Mechanical Alloying Method / Zhong Qing Tian; Guo Xing Zhang; Wei Jiu Huang; Yu Kai Zhu |
| Erosion Experimental Study on Organ-Pipe Nozzles in Air / Feng Li; Duan Feng Han |
| Preparation of Two-Package Inorganic High-Temperature Paint / Guo Jun Li; Jing Yang; Xiu Juan Zhao; Rui Ming Ren |
| Preparation of High-Temperature-Resistance Silicone Paints / Guo Jun Li; Yan Bin Wei; Rui Ming Ren |
| Electro-Spark Deposition of Composite TiB2-TiC on Electrodes' Surface / Fen Fang Tan; Luo Ping; Zhi Xiong Xie |
| A Convenient Strategy to Control the Specific Surface Area of the Mesoporous Silica by Using the Poly(pseudo)rotaxanes Template / Lei Zu; Yu Yuan Zhi; Kai Gu; Hui Qin Lian; Xiu Guo Cui |
| Tension in Surface Layer of Workpiece by Different Tool´s Geometry / Ivan Mrkvica; Vladislav Ochodek; Miroslav Janos; Petr Sysel |
| Surface Modification of Magnesium Hydroxide with Stearic Acid / Dong Sheng Zhang; Zhi Qi Liu; Li Juan Li; Li Xia Zhu |
| Mechanical Milling Prepared Nano-Sized Al2O3 Particles Utilized in Electroless Plating Ni-P- Al2O3 Composite Coatings / Ai Zhi Yu; Mao Dong Li; Jin Mei Lin; Shu Kuan Zhang |
| Surface Redox Initiated Polymerization to Prepare the Poly(N-isopropylacrylamide) Coating / Yan Zhi Liu; Yan Liu; Su Rui Zhao; Yi Jing Li |
| Effects of Fuel Gas on the Microstructure and Mechanical Properties of HVOF Spraying WC-12Co Coating / Yan Liu; Gou Qing Gou; Hui Chen; Li Jun Wang; Ming Jing Tu; Jin Peng Yu |
| The Influence of Supports on the Surface Properties of PtNi Bimetallic Catalysts / Noor Hana Hanif Abu Bakar; Mohammed M. Bettahar; Mohamad Abu Bakar |
| The Preparation of Silver-Spray Plated on PET Filament / Jian Chao Zhan |
| Study on the Properties of Polyester Fabric by Ni/Co/Fe Multilayer Electroless Plating Technology |
| Three Numerical Simulation Methods on Dynamic Free Surface Deformation Simulation of a Sessile Drop / Chao Yue Chen; Zuo Sheng Lei; Xiao Xing Jin; Yun Bo Zhong; Zhong Ming Ren |
| Computation and Simulation of 5-Axis Cutter Based on Scattered Point Cloud Data / Wen Hui Zhao; She Liu |
| ME Molecular Dynamics Simulation of the Sintering Process of the Porous ITO Material / Xiao Long Zhou; Jian Chun Cao; Hao Feng; Yu Cao; Yong Jun Fan; Jing Chao Chen |
| Structural and Shaping Design of Centerless Cylindrical Grinding Machine Based on CAD / Li Ai Pan; Xian Chun Cheng; Ning Ding |
| An Efficient Algorithm Design for the One-Dimensional Cutting-Stock Problem / Gui Cong Wang; Chuan Peng Li; Jie Lv; Xiu Xia Zhao; Huan Yong Cui |
| Modeling and Analysis on the Rotation Accuracy of Lathe Spindle / Qiang Huang; Kun Wei |
| Numerical Simulation of Bionic Wing for Drag Reduction / Li Hong Zhang; Wei Jie Li; Ji Xin Yin |
| Numerical Simulation and Online Window Monitoring of SPR Process / Xiao Cong He; Yue Bo Hu; Bao Ying Xing; Yan Fang Ding; Kai Zeng |
| Numerical Simulation of Heat Flow in a Vehicle Cabin / Yang Zeng; Masafumi Katsuta |
| EBD Control Research on Nonuniformity Roads for Electric Vehicles on Energy Regenerative and Feedback Friction Integrated Braking / Guo Ye Wang; Lu Zhang; Feng Zhu Yu; Zhong Fu Zhang |
| Chaotic Cat Swarm Algorithms for Global Numerical Optimization / Shi Da Yang; Ya Lin Yi; Zhi Yong Shan |
| Chaotic Grenade Explosion Algorithms for Global Numerical Optimization / Shi Da Yang; Ya Lin Yi; Yan Ping Lu |
| Homotopy-Inspired Cat Swarm Algorithm for Global Optimization |
| Homotopy-Inspired Grenade Explosion Algorithm for Global Numerical Optimization |
| Study on On the Cross-Sectional Shape Change of the Profiled Fiber along the Spinning Path in Melt Spinning / Yue Wang; Wu Shan Cheng; Ming Hong Wang |
| Quantification of N2+ Implanted AES Depth Profiling Data in Al / Shao Ping Rao; Yi Liu; Xiao Yin Wang; Wei Jian; Jiang Yong Wang |
| The Impact of Roundness of Granular Materials on Physical Modeling Results / Chong Qing Liu; Jian Xun Zhou; Jian Liu |
| Research on NX-Based Progressive Die Design / Jun Liu; Cong Dong Ji |
| Shifting Analysis and Simulation of Automated Mechanical Transmission without Separating Clutch / Zai Min Zhong; Xiang Yan Xin; Guo Ling Kong |
| Ship Lines Modeling Theory of High-Speed Ship Based on the Partial Differential Equations / Chun Tao Li; Xiang Qi; Jian Shi; Zhong Kun Shi; Huan Qi |
| A Production Scheduling Framework Integrated with Simulation Module / Jian Gu; Wei Min Mao |
| Study of the Mechanical Properties for an Automotive Part under Squeeze Casting Process / Surasak Suranuntchai; Ekkachai Kittikhewtraweeserd |
| Numerical and Experimental Investigation into the Aluminum Alloy Irregular Box Sheet Hydroforming Process / Yong Ming Wang; Li Hui Lang; Ya Su Xie |
| Numerical Simulation for Precision Roll-Forging of Automobile Front Axle / Ru Xiong Li; Song Hua Jiao |
| Fabrication of Aluminum Clad Copper Tube by Planet Schrà ge Walzwerk Process / Xiao Li Zhang; Fu Sheng Tian |
| Numerical Simulation of Springback in Stretch Forming with Two Different Grippers / Xue Chen; Pei Hua Liu; Ming Zhe Li |
| Numerical Simulation on Rolling Process of Medium Plate / Lan Wei Hu; Xia Jin; Lei Shi; Sheng Zhi Li |
| Optimization Design of Forging Die for Supporting Bar Based on DEFORM-3D / Lei Fu; Li Lin |
| Phase Field Simulation of Solidified Multiple Grains / Hong Min Guo; Tao Wei; Xiang Jie Yang |
| Simulation Study and Optimization of Process Parameters in Precision Forming of the Nut Plate / Xiang Bei Wang; Duo Nian Yu; Hong Yan Chang |
| Research on the Manufacturing Process of the Whole Fiber Hollow the Trailer Axle / Xing Yu Guo; Peng Zhang |
| Effect of Coil Parameters on Rivet Deformation in Low Voltage Electromagnetic Riveting / Jiang Hua Deng; Chao Tang; Yi Ming Zheng; Yan Ran Zhan |
| Research on Roll-Forging Process Simulation for Thick-Walled Hollow Part / Hua Min Liu; Lei Wang; Ming Hua Jin |
| Research on Algorithm of Forming Limit Height in Semi-Ball Bottom Cylindrical Deep Drawing / Kang Chen; Hui Liu; Cheng Yun Peng |
| Numerical Simulation of Stamping Forming for an Automobile Reinforced Plate Based on Orthogonal Test / Ming Wei Wang; Long Chen; Xiu Jun Zhao; Shu Li |
| Numerical Simulation of Residual Stress during Stamping-Forging Forming of 2024 Aluminum Alloy Sheet Metal / Da Li; Lei Deng; Xin Yun Wang; Jun Song Jin; Ju Chen Xia |
| Numerical Simulation Research on Warm Forging Process for Spur Gear with Large Module Based on Floating Die Method / Ke Long Yan; Jun Song Jin; Xin Yun Wang; Ju Chen Xia; Jian Jun Li |
| Filling Pattern of Step Gating System in Lost Foam Casting Process and its Application / Hong Zhou; Li Heng Luo |
| Design of Die-Casting Die with Double-Stage Linkage Hydraulic Core-Pulling Mechanism / Hong Qi Lin; Shi Bang Ma |
| The Process Analysis of Commonly Used T-Shaped Tube Compound Bulging Media / Ling Yun Zhang; Jia Yang Xu |
| Modeling and Analysis of Process Parameters for Plastic Injection Molding of Base-Cover / Yan Fang Yin |
| Methods of Establishing Forming Limit Diagram of Tube Hydroforming / Guo Lin Hu; Lian Fa Yang; Jian Wei Liu |
| Research on Intelligent Precise Pass Design Algorithms / Guo Chang Li |
| Research on the Forming Process of the Y-Shaped Tube Based on ABAQUS / Ling Yun Zhang; Ya Lin Pan; Zhen Jun Li |
| The Effect of Drawing Process on the Properties of Split-Film PTFE Fiber / Xin Min Hao; Yuan Yang; Bin Xiang Huang; Lei Huang; Guo Jun Zhang |
| Numerical Simulation of Discrete Die Bending of Rectangular Tube / Qing Li Wei; Xin Zhong; Qiu Ping Song |
| Finite Element Analysis on Flanging Forming of Car Spoke Parts / Xiao Gang Qiu |
| Numerical Simulation on the Microstructure during Extrusion Process of P91 Large Diameter Thick-Walled Tube / Pan Li; Zhang Jian; Xu Ma |
| Model of Shear Slipping Deformation and its Cutting Energy Consumed for High Speed Machining / Hu Ping An; Zhi Yuan Rui; Rui Feng Wang; Zhi Mei Zhang |
| Precision Grinding Characteristics and Process Optimization on YG3 Cemented Carbide / Xun Kun Liang; Zhi Jian He |
| Study on 22MnB5 Steel Microstructure in Hot Forming Progress / Meng Chen; Da Sen Bi; Liang Chu; Xian Chen Gao; Pei Lin Li |
| ANSYS Application in Cutting Stiffness Analysis of a Gearbox's Back Case / Yuan Wang |
| Study on the Mechanism and Tool of the Uniform ER Finishing with Changeable Removal Rate Model of Free-Form Surface / Yi Fu; Xin Sheng He; Chun Fu Gao; Chu Xiong Xie; Peng Huang |
| Optimal Selection of Machining Parameters by Genetic Algorithms for Face-Milling Operations Based on Minimum Unit Machining Time / Pei Qing Yang; Li Bao An |
| Study on Drill-Through Determination in Vibration Drilling Based on Axial Force / Run Ze Yang; Hua Feng Shi |
| Turn-Milling Parameters Optimization Based on Cutter Wear / Chao Huang; Yong Lin Cai |
| Quality Research on Electric Discharge Machining with Rotary Surface of Engineering Ceramic / Li Xin Zhang; Li Hui Wang |
| The Hot Deformation Behavior and Hot Processing Map of CL60 Rail Wheel Steel / Fei Zhao; Yan Yan; Yong Hai Ren |
| Experimental Research on the Relation between Processing Parameters and Fractal Dimensions of the Machined Surface / Zhi Xin Feng; Yu Jun Cai; Zhen Li |
| Study of the Impact Toughness Experiment of SiCp / Al FGM / Jin Li; Liang Yi Li; Chun Ling Zhou |
| Simulation and Experimental Study on Size Effect in Steel Micro Milling Machining Process / Chun Jiang Zhou; Jian Cheng Liu |
| Research on Surface Roughness Experiment of Flank Milling for the Ruled Surface Blade / Yong Lin Cai; Di Yao |
| The Application of Enamel Material in the Jewelry Industry / Hong Yun Guo; Kai Fang Xie; Hua Wu Liu |
| Preparation of Al2O3/Cu Composites by Internal Oxidation in Cu-Al Alloy Sheet Processing / Rui Wu; Dan Wen Zhang; Juan Sun; Feng Zhang Ren; Qing Chuan He |
| Laser Micro-Jet Processing on Red Copper / Xi Zhao Lu |
| Combined Setting Technology of the Bending Roll in Five Stands 4-High Reduction Cold Mill / Lian Lian Zhou; Xu Chuang Ma; Ling Kun Kong |
| Proportional Crown Rolling for Single Rough Stand in Semi-Continuous Hot Rolling Strip / Shen Bai Zheng; Sen Zhou; Hui Wang; Zhuo Fei Song; Hong Bin Li |
| Study on Manufacturing Technology of Resin Bonded Diamond Wire Saw / Dong Mei Xu; Hai Bo Zhang; Jun Gao; Ming Hui Cong |
| In Situ Detection of Thermal Cycle in Weld Metal of Cr-Mo Steel / Hai Tao Li; Yong Chang Zhu; Shou Fan Rong; Li Jie Qu |
| Numerical Simulation on Interface Crack Propagation for Non-Uniform Welded Joint / Xiang Hong Zhang; Can Duo Shen; Chang Qing Sun |
| Vacuum Brazing of Zircaloy-4 and Stainless Steel Using Ag-Cu-Ti Brazing Filler Metal / Kai Qi; Rui Feng Li |
| Mathematical Model of Ti-6Al-4V Single Track Formed by Selective Laser Melting / Jian Feng Sun; Yong Qiang Yang; Jie Liu; Di Wang |
| Characteristics of Surface Microstructures for Welded Joint of 7A52 Aluminum Alloy before and after Surface Nanocrystallization / Rui Jun Xie; Yao Lu; Fu Rong Chen; Zhi Ming Shi |
| Analysis on the Refractory Erosion of the Electric Arc Furnace and Study on the Measures of Protecting the Furnace Lining / Jie Qin; Jian Ling Qi |
| Vacuum Brazing of GH2132 Superalloy Using BNi-2+BNi-5 Composite Filler / Rui Feng Li; Zhi Shui Yu; Kai Qi |
| Effect of Metal Block on Stress Distribution in Weld-Bonded Steel Joint / Xiao Ling Zheng; Jia Ling Yan; Min You; Jiang Cheng Zhang; Lai Hu Song |
| Effect of Shock Temperature on the Impact Toughness of Butt-Joint / Min You; Ling Wu; Hai Zhou Yu; Jing Rong Hu; Mei Li |
| On Copper-Steel Joint Arc Welded with Nickel Based Filler / M. Velu; Sunil Bhat |
| Process Analysis of the Electric Arc Furnace Melting for Alumina Spinel Production / Guo Chao Qi; Feng Jun Shan; Qiang Li; Jing Yuan Yu |
| The Vehicle Modal Analysis and Test Verification Based on Weld Joints Simulation / Chang Hai Yang; Xin Jin; Hai Sheng Song; Wen Ku Shi |
| Study on the Residual Stress of LY12 Welded Component / Feng Xia; Jian Ping Li; Gao Hong Li; Man Zhu |
| State-of-the-Art of Joining Technologies for Assembled Camshaft / Jia Ting Chen; Lian Fa Yang |
| Effects of Welding Time and Alloy Elements on Mechanical Properties of Aluminum/SPCC Joint Using Resistance Spot Welding / Nan Wang; Tomiko Yamaguchi; Kazumasa Nishio |
| Solidification Behavior and Phase Relation of Arc Melting La-Fe-Si Alloys / Zhong Qi Dong; Jin Chen; Jun Li Jia |
| Effects of Filler Metal on the Microstructures and Properties of 2519A/7A52 Weld Joint / Zhong Ju Hu; Hao Huang; Hong Gang Zhou |
| The Influence of Different Factors on the Stress Distribution of Strip Joints / Zhi Li; Min You; Mei Rong Zhao; Gang Yan Li |
| Finite Element Analysis for Mechanical Part of Metal Embedded Resin Mineral Composites / Shi Mei Hao; Jian Hua Zhang; Tao Wang |
| The Analysis for Influence of Connecting Rod Strength with the Change of Interference of Connecting Rod Small End Bushing / Qing Ying Kang; Xiao Hui Cao |
| Elastic-Plastic Analytical Solution of Deep-Buried Circle Pervious Tunnel Based on Unified Strength Theory / Qing Ma; Jun Hai Zhao; Dong Fang Zhang |
| Stress Calculation for Large Storage Oil Tanks' Shells Based on the Theory of Short Cylindrical Shell / Yu Kun Li; Wen Hong Sun; Guan Duan; Jun Hui Liang |
| The Analysis of the Deformation and Contact Lubrication Problem of HPD Diesel Engine Connecting Rod Bearings Based on the FFT Method and Flexibility Matrix Method / Jun Yan Zhang; Su Fen Zhang; You Wei Zhang |
| Analysis of Motion Process of Incompact Landslip-Collapse Soil / Xiao Qin Yi; Qing Hai Zeng; Ying Liang |
| Dynamic Anti-Plane Characteristic for a Quarter-Infinite Piezoelectric Medium with a Cylindrical Lining / Li Li Sun; Tian Shu Song; Jian Liu |
| Influence on the Stress of Pavement with Crack in Surface from Flexible Transition Layer under Dynamic Loading / Shuai Tu; Ai Min Sha |
| Influence on the Stress of Pavement with Crack in Base from Flexible Transition Layer under Dynamic Loading |
| Predicting Fatigue Crack Initiation Life of Plate-Like Component by Coupied Variational Principle / Wen Feng Tan |
| Research on the Wear Morphologies of NBR/FKM Blend under Dry Friction / Rui Nie; Shi Jie Wang; Xiao Ren Lv; Yu Zeng Zhang; Rui Zhan |
| Notch Fracture Behavior of Cold-Rolled Ni3Al Foil / Chuan Yong Cui; Toshiyuki Hirano |
| Research on the Mechanism between No-Smooth Surface, Desorption and Friction Increasing Based on Bionic / Xiao Shen; Zhou Yu Fu; Chun Jian Su; Zhao Yang Sun |
| Friction and Wear Behaviors of Copper Rubbing against Carbon Material with and without Windy Conditions / Tao Ding; Yu Mei Li; Qiu Dong He; Wen Jing Xuan |
| FEM Simulation and Experimental Verification on Rotating Forging of Three-Layer Clad Cylinder Considering Constant Shear Friction / Gow Yi Tzou |
| Study on Failure Mechanism of Steel Wire Wound Reinforced High-Pressure Hose / Fan Gu; Jia Quan Sun; Dan Wang |
| Study on Optimal Winding Angle of Submarine Oil Flexible Pipe / Fan Gu; Gan Song; Qiao Jin; Hui Xin Wang |
| Lightweight Analysis of Automotive Anti-Collision Materials Based on Equal Energy Absorption Strategy / Chuan Qing Wang; Wei Min Zhuang; Yan Hong Chen |
| Features of Meso-Deformation and Failure of Aluminum Foam under Impact / Bao Yang; Li Qun Tang; Yi Ping Liu; Ze Jia Liu; Zhen Yu Jiang |
| Elastic-Plastic Fracture Assessment for the Cracks Emanating from a Circular Hole under a Biaxial Loading Condition / Z X Wang; R Liu |
| Elastic-Plastic Analysis and Failure Assessment of the Pipeline Steel with Surface Crack / Zhong Xian Wang; Rui Feng Zhang |
| Validation of a Phenomenological Lifetime Estimation Method with Biaxial Experiments at High Temperature / Lu Cui; Peng Wang |
| Research of Comparison Circular Interpolation on WINCE / Tao Chen |
| An Optimization Approach for 25um Pitch Microbolometers / Hong Xi Zhou; Chao Chen; Tao Wang |
| Grey Clustering Model of Coating Erosion Resistance Evaluation / Bao Ping Chen |
| The Impact of Drying Methods on Paper Physical Properties / Shu Lei Zhao; Zheng Yuan Wei; Xiao Tian Ding; Qiang Lin |
| Steel Wire Grinding Testing Based on New Type Abrasive Belt Grinding Machine / Ping Zhang; Jia Chun Li |
| Numerical Analysis on the Butt-Joint under Izod Impact Test / Xiao Ling Zheng; Ling Wu; Min You; Kai Liu; Mei Li |
| Simulation and Experimental Research of Sheet Metal Defect Detection Based on Ultrasonic Lock-in Thermography / Lei Qin; Jun Yan Liu; Bin Jiang |
| Study on Microwave Combined with Granular Active Carbon for Treatment of P-Nitrophenol Wastewater / Dong Yuan; Da You Fu; Zhi Wen Luo |
| Research on Anti-Creasing Properties of 100% Cotton Yarns / Yun Li Wang; Jun Chen; Shan Cheng; Zong Li Mao; Ming Min Dong; Wei Lin Xu |
