Finite Element Simulating of C/SiC Composite Bolt / Tao Huang; Yi Yan Zhang |
The Preparation of CaZrO3 Coating Ultra-Fine Nickel Powders via Chemical Deposition / Rui Xu; Jin Zheng; Cui Fan; Yuan Yuan Gao |
Theoretical Study of Energy-Level Splitting of Cs2NaPrCl6 Crystal / Mei Ling Duan; Jin Hong Li; Xiao Feng Yang |
Preparation and Characterization of Fe3+-Doped TiO2/Diatomite Composite / Lu Sun; Jun Xiong Lin; Lan Wang; Kai Xin Song |
Research on VARTM Technology for Fabricating Basalt Fiber/Vinyl Ester Composites / Zu Li Sun; Ming En Guo; Zhi Ning Yu |
Design, Synthesis and Photophysical Properties of Novel Tetrahedral Carbazole-Bridged Silanes with Benzimidazole Groups / Qing Yu Ma; Rui Fang Guan; Guo Zhong Li; Deng Xu Wang |
Load-Carrying Capacity of Cantilevers of Anti-Flood Barriers Made of FRP Composite Structural Profiles / Jindrich Melcher; Marcela KarmazÃnová |
Tribological Behavior of Si3N4-hBN Ceramic Materials Sliding against Fe-B Alloy without Lubrication / Wei Chen; Yi Min Gao; Jian Zhong Chen |
Isothermal Crystallization Behavior of Poly (L-lactic Acid)/ Surface-Grafted Silica Nanocomposites / Yan Hua Cai |
Synthesis of High Solid Content Acrylic-Polyurethane Hybrid Emulsions with Low Viscosity / Zhao Xiang Zheng; Shu Fang Liu; Wei Bin Lin; Xiao Ting Guo; Yan Fen He; Xiao Li |
Electrochemical Polymerization and Electrochromic Properties of Poly(3-methoxythiophene)/NiO Composite Films / Wen Ting Li; Ya Ting Wang; Xu Chun Song |
Preparation of Fly Ash Hollow Glass Bead/Titanium Dioxide Composites by Chemical Precipitation / Meng Meng Wang; Hao Ding; Yun Xing Zheng; Yu Liang |
Preparation of Aluminum Composite Ceramic Membrane by Inorganic Precursor Sol-Gel Method / Shu Heng Liu; Lin Lin Guo; Qian Ping Wang |
Tribological Characteristics of Different Components on C/C-SiC Composites Fabricated by Warm Compacted In Situ Reaction / Zhuan Li; Peng Xiao; Xiang Xiong |
Magnetoelectric Effect of the Ba0.80Sr0.2TiO3-CoFe2O4 Ceramic Composites by Molten-Salt Synthesis Method / Wei Rao; Ding Guo Li; Hong Chun Yan |
An Experimental Investigation of the Dynamic Mechanical Behaviors of Hollow Spheres Filled Syntactic Foam / Ming Yu; Ping Zhu |
Experimental Research on Failure of Filament Wound Composite Pipe under Axial Tension / Wei Dong Wen; Jian Li; Hai Tao Cui; Ying Xu; Hong Jian Zhang |
Influence of Si3N4 Addition on the Mechanical Properties and Microstructure of Unfired A12O3-C Slide Plate / Li Ai; Jun Cong Wei; Xiu Mei Ji; Jun Bo Tu |
Performance and Microstructure of TiN/Cu EDM Electrodes / Jing Jing Zhang; Kai Yong Jiang; Jie Yan; Fei Wang; Xiao Wei Wang |
Effect of Fiber Volume Fraction on Low Cycle Fatigue Behavior of Al2O3f/Al-Si Composites / Jian Jun Cui; Bing Chao Li; Guo Hua Zhang; Jian Xin Zhang; Zuo Shan Wei; Zeng Jian Feng; Wei Cai |
The Rotational Extrusion Alloying Al-Ti Composite / Wei Ping Xu; Li Ming Ke; Li Xing |
Preparation and Humidity Control Performances of a Novel Composite Humidity Control Paper / Ning Yu; Qing Qing Yao; Peng Fei Xu; Zhi Wen Hu; Zhi Qin Peng |
Fatigue Residual Properties of Ti/APC-2 Nanocomposite Laminates after Low-Velocity Impact / Ming Hwa R. Jen; Che Kai Chang; Jing Guan Chen; Bo Cyuan Lin |
The Effects of Carbon Black Loading on the Characteristics of Carbon Composite Bipolar Plate by Utilizing Graphite Waste Products / Yunita Sadeli; Johny Wahyuadi Soedarsono; Bambang Prihandoko; Sri Harjanto |
Effect of Deposited Angle on Structure and Surface Morphology of Fluorocarbon Films Deposited by Pulsed Plasma Thruster / Rui Zhang; Jian Jun Wu; Dai Xian Zhang; Fan Zhang; Zhen He |
Rheological Properties of RLDPE/LLDPE Blends / Xue Yan Zhao; Xue Gang Luo; Xiao Yan Lin; Xiao Qi; Hong Ping Zhang; Ji Wei Li |
Study on the Damping Properties of Multi-Layered Gradient Materials Based on Organic Hybrids / Xin Bo Ding; Tao Liu; Bao Cheng Fu; Jian Han |
Study on the Rheological Behavior of Neat PLA Chips and PLA Composites for Meltblowing Nonwovens / Bin Yu; Hui Sun; Jian Han; Peng Cheng Yu; Guo Ping Xu |
Effect of Polymeric Coupling Agent on Mechanical Properties of Kenaf Fiber / Polystyrene Composites / Chen Zheng; Yan Yan Xu; Takahiko Kawai; Shin-ichi Kuroda |
Study of the Impact Toughness Experiment of SiCp/Al FGM and Numerical Simulation / Jin Li; Liang Yi Li; Zheng Yuan |
Kinetics of Non-Isothermal Degradation of PFA / Zhi Hong Guo; Pei Jie Lin; Qing Yan Xu; Qun Shao; Yan Ping Wang; Gao Qiu; Yi Min Wang |
Surface Structure and Protein Resistance of PMMA/PS Copolymer Coatings / Xu Ming Zhang; Yu Zhang; Guo Jin; Li Li |
Experiment and Modeling Study on the Compaction Behavior of Bindered Textile Preforms / Wang Qing Wu; Bin Yan Jiang; Lei Xie; Gerhard Ziegmann |
Ag Doped Co3O4 Nanowire Arrays as an Electrode Material for Electrochemical Capacitors / Yang Xu; Ji Chun Huang; Lin Cheng; Dian Xue Cao; Gui Ling Wang |
The Fabrication of MnO2 Nanoparticle for Supercapacitor Application / De Qun Kang; Ze Xiang Chen; Tian Yong Hu; Miao Dong; Jun Ren |
Study of Tension Process of Single Crystal Titanium Nano-Rod Based on the Molecular Dynamics / Hui Ling Jia; Zhao Xi Li; Xue Jie Liu; Yan Qi |
Preparation and Characterization of TiO2 Nanoparticles / CNTs Composite Particles / Ming Qiu Wang; Jun Yan; Shi Guo Du; Bin Wang; Hao Qin |
Hydrothermal Synthesis of Tungsten Oxide Nanoparticles / Yang Rong Yao; Rong Ma; Xu Chun Song |
Synthesis and Characterization of Nano Cerium Oxide by Surfactant-Assisted Precipitation Method / Jun Teng Shang; Min Yang; Wan Long Zhang; Cong Tan; Dian Jun Han |
Preparation of Nano-Scale Piece of Sericite by Using Mechanical Exfoliation Method and Ultrasonic Method / Yu Liang; Hao Ding; Fen Chen |
Facile Synthesis and Electrochemical Characterization of PbO@C Nanocomposites / Chao Yang Liu; Jian Guo Yu; Jun Qin Fan; Yong Nan Zhao; Xu Fei Xue |
Preparation and Characterization on PU/CS Nanofiber Membrane / Long Jiao; Wei Min Kang; Bo Wen Cheng |
Research on Electrospinning Process of Pullulan Nanofibers / Xiao Bin Sun; D. Jia; Wei Min Kang; Bo Wen Cheng; Ya Bin Li |
Envelope Method Applied on the AZO Thin Films / Ying Xu; Peng Hua Ma; Mo Ning Liu |
CdSe/ZnO Core/Shell Semiconductor Nanocrystals: Synthesis and Characterization / Li Min An; Xuan Lin Chen; Xue Ting Han; Jie Yi; Chun Xia Liu; Wen Yu An; Yu Qiu Qu; Jian Guang Chi; Hong Wei; Kai Yue Qi; Ya Nan Wen; Qiang Wang; Wei Gang Zhou; Hong An Ye; Zhuo Sun |
Effects of Braiding Parameters on Radial Compressive Property of Intraluminal Stents / Wen Long Sui; Jin Hua Jiang; Nan Liang Chen |
Treatment of Chroma from Tannery Effluent by Flocculant / Qin Huan Yang; Chang Qing Zhao |
The Role of Copper in the Growth of Methylosinus trichosporium IMV 3011 and Poly-#946;-Hydroxybutyrate Biosynthesis / Jing Dong |
Synthesis of PAN Fiber Supported Fe(bpy)32+ for RhB Degradation under Visible Light Irradiation / Zhen Bang Han; Jia Guo; Wei Li |
Preparation and Adsorption Performance of Cu (II)-Imprinted ALG-CTS Complex Microspheres / Wei Ying Zhang; Dan Chen; Xiao Li; Xiao Guang Ying |
Effects of Enzymes Treatment on Structure and Properties of Acellular Dermal Matrix / Xin Chun Shen; Ling Ping Wang; Mao Sheng Wan; Cheng Bo Cao; Hong Liu |
Experimental Investigation of Microbial Paraffin Removal Technology / Jiang Hong Liu; Yun Peng Jia; Rui Dan Xu; Yi Tong Chen |
Studies on the Property Changes of Environmental Degradation Mulching Film and Polyethylene Mulching Film in Water Environment / Bin Bin Zhao; Xue Gang Luo; Xiao Yan Lin; Hong Ping Zhang |
Ramie Fiber Modification Trials under Different Conditions / Qi Rui Wang; Wei Fan |
Cell Proliferation on the Hydroxyapatite Ceramics Derived from Animal Bones |
The Thermal Hysteresis Temperature of 'HPLC-6': Langmuir Model / Li Fen Li; Lin Zhang; Xi Xia Liang |
The Effect of Alkali Treatment to the Properties of Banana Fibers / Lin Tian; Su Ying Chen; Xiao Yun Bi |
Synthesis and Characterization of Spherical Aggregations of Organic-ZnS Hybrids / Jun Song Yang |
Improvement of Wear Resistances of AISI 316L Austenitic Stainless Steels by Anodic Nitriding / Yang Li; Liang Wang; Jiu Jun Xu; Ying Chun Shan |
Study of the Damage of Drills in Dry Drilling of NM360 Steels / Ming San Xu; Ji Bin Jiang; Shou Jin Zeng |
An Experimental Study on the Shear Strength of Steel Structures Joints / Piero Morelli |
Dissimilar Welding between AISI 304 Stainless Steel and AISI 1020 Carbon Steel Plates / Wichan Chuaiphan; Chandra Ambhorn Somrerk; Satian Niltawach; Banleng Sornil |
Microstructure Evolution and Property of Austenitic Stainless Steel after ECAP / Li Min Wang; Zhi Hua Gong; Gang Yang; Zheng Dong Liu; Han Sheng Bao |
3-D Simulation of H-Beam Multi-Pass Hot Rolling and Microstructure Evolution / Qing Qiang He; Jia Sun; Jun You Zhao; Li Jian Xu; Cui Cui Li |
Multicomponent Y-M-Al-Co(M=Ce, Nd or Pr) Amorphous Alloys Developed by Equiatomic Substitution / Shi Wen He |
The Constitutive Relation of Total Strain Theory Based on the Simple Experimental Data by the Application of Titanium Alloy / Xiao Jiu Feng; Hong Du; Ping Zhou |
Effect of Isothermal Ageing on Damping Capacity of Cu-20.4Al-8.7Mn / Gang Ling Hao; Qiao Ping Xu; Wei Guo Wang |
Microstructures and Damping Capacities of AZ91D-0.7%Si Alloy / Zhong Ming Zhang; Zheng Hua Huang; Ying Ma; Chun Jie Xu |
Multi-Fractional Research on Pore Distribution in the Sinter Ore with Different Basicity / Qing Jun Zhang; Jin Gang Liu; Li Mei Jiang; Wen Ling Mo; Yuan Liang Li; Yu Zhu Zhang |
Study on the Corrosion Resistance of High Boron Iron-Based Alloy / Ming Min Qiu; Hao Wang; Xu Wu; Hong Qun Tang; Guang Cai Su |
Study on Corrosion Behavior of Hot Extruded Mg-1Ca-0.5Mn Alloy in Sodium Chloride Water Solution / Ying Ma; Zhong Ming Zhang; Ting Wang; Yang Guo; Chun Jie Xu |
Model Analysis on Particles Size Distribution of Beryllium Powder / Li Jun He; De Mei Xu; Nan Hu; Ting Ting Li; Jing Ming Zhong; Zhan Hong Wang; Ben Shuang Sun; Hui Ling Kang; Shuo Wan |
Effect of Sintering Temperature on Microstructure and Mechanical Properties of WC-16TiC-xTaC-9Co Cemented Carbides / Chong Cai Zhang; Quan Wang |
Multi-Fractal Behaviors in Grain Size Distribution of Low Silica Sinter / Yu Zhu Zhang; Qing Liu; Qing Jun Zhang; Jin Gang Liu; Wen Ling Mo; Yuan Liang Li |
Comparison Analysis of Aircraft Aluminum Alloy Corrosion Damage Forecasting Method / Zhi Guo Liu; Zhi Tao Mu; Zeng Jie Cai |
Anisotropy Affecting Dendrite Growth of Fe-C Alloy in a Forced Flow / Xun Feng Yuan; Bao Ying Liu |
Comprehensive Mathematical Model of Full Oxygen Blast Furnace with Top Recycle Gas Heated by Gasifier / Jia Le Meng; Hui Qing Tang; Zhan Cheng Guo |
Microstructure and High Temperature Mechanical Properties of Mg-1Si-1Y Alloy / Ying Ma; Zhong Ming Zhang; Zhen Lin Lv; Chun Jie Xu |
Numerical Simulation of Equal Channel Angular Pressing for Multi-Pass in Different Routes / Xiao Lian Zhao; Na Chen; Ning Ning Zhao |
Effects of Electromagnetic Field and Lubricate Condition on the Surface Quality of Aluminum Alloy Billet during LFEC Processing / Fu Qu; Jian Zhong Cui |
A New Method of Processing High-Precision Micro-Hole with the Femtosecond Laser / Xiao Jun Yang; Ming Li; Li Wang; Hua Long Zhao; Guang Hua Chen |
Multi-Field Coupled Analysis on Preparation Process of CZ Crystal / Ke Liang Ren; Song Qing Zhao; Qiao Di Yang; Dong Xu Guo |
The Research and Optimization of a 6061 Aluminum Rectangular Tube Extrusion Using Porthole Dies According to the Parameter of Split Ratio / Shu Mei Lou; Guo Liang Xing; Sheng Xue Qin; Lin Jing Xiao |
Characterization of Stress Concentration Degree Based on 2-Dementional Magnetic Memory Signals / Hui Peng Wang; Li Hong Dong; Shi Yun Dong; Nan Xue; Bin Shi Xu |
Process Optimization Based on Artificial Neural Network of Plant Oli to Preparing Biodiesel / Chang Mei Wang; Shao Bing Wu; Wu Di Zhang; Yu Bao Chen; Fang Yin; Shi Qing Liu; Jing Liu; Xing Ling Zhao |
Influence of Different Damp-Heat Setting Techniques on Crimp-Hair Setting Effect / Liang Wei; Run Jun Sun; Jie Dong; Cheng Kun Liu |
Preparation and Apply of Adjustable Angle Machine for Friction Material on Mixing and Granulation / Zhen Yu Wang; Tie Shan Wang; Song Li |
Microstructure Evolution of Al/Fe Liquid/Solid Interface / Shu Ying Jiang; Shi Chun Li |
Modeling and Experiment of the Cutting Force for Aluminium Alloy Work-Piece / Mu Lan Wang; Jun Ming Hou; Bao Sheng Wang; Wen Zheng Ding |
Functional Finishing of Cotton and Polyester/Cotton Fabrics with a Fluorine-Containing Water and Oil Repellent / Jun Zhang |
A Method for Determination of Friction Coefficient in Sheet Metal Forming of Magnesium Alloy / Xin Wu Ma; Guo Qun Zhao; Wen Juan Li |
Study of Using Internal Thread Whirling in Machining Titanium Dental Implant / E. Hsung Cheng; Tung Lin Tsai; Ming Jer Lin; Xian Ru Wu; Nan Ming Yeh; Bo Wei Pan; Yi Chin Chen; Shien Nan Kuo |
Effect of Specific Ions in Preparing Water on Viscosity of Polyacrylamide Solution / Shi De Feng; Dan Dan Yuan; Xin Sui; Jing Dong; Shu Qing Ma; Hong Jun Wu; Bao Hui Wang |
Process Optimization of Synchronizer Ring Gear Extrusion / Heng Yu Zhu; Jian Lan; Yong Zhang |
Physical Simulation on Forging Method with Horizontal V-Shaped Anvil / Yong Jun Zhang; Zhu Bai Liu; Jing Tao Han |
Study on the Forming Process Parameters of Sleeper Fixed Reinforcing Plate Using Orthogonal Experiment Method by Numerical Simulation Technology / Hai Peng Li; Xue Xia Wang; Li Hui Wang; Jia Wei Fan; Ju Yuan Zhao |
Experimental Research of Al2O3 Micro-Particles Production by Supercritical Hydrolysis / Yan Jie Zhang; Xue Yong Wang; Yan Fang Yang |
Stress-Etching Using Laser Electrochemical Micromachining with Masks / Zhong Yang Li; Zhao Yang Zhang; Yao Min Wang; Wei Ping Mao |
Prediction of a New Form of the Cutting Tool According to Achieve the Desired Surface Quality / Jozef Jurko; Anton Panda; Marcel Behún |
Numerical Simulations of Combustion and Decomposition Processes in Precalciner with Two Different Heights of Raw Meal Inlets / Shu Xia Mei; Jun Lin Xie; Feng He; Ming Fang Jin |
Influence of Melt Temperature on Structure of Polyacrylonitrile in Ionic Liquids during Plasticized Melt Spinning Process / Yin Cai Tian; Ke Qing Han; Wen Hui Zhang; Jing Jie Zhang; Rui Zhang; Shu Ping Liu; Mu Huo Yu |
A Study of Femtosecond Laser Machining Technology Applied in Air-Film Holes on Turbine Blades / Hua Long Zhao; Wen Yu Zhu; Xiao Jun Yang; Shi Fang Gao; Hong Yan Zhao |
FEM Simulation on Extrusion of Magnesium Alloys / Guo Ping Chen; Jun Deng; Shui Wen Zhu |
Finite Element Analysis of High Speed Cutting Tool / Wei Fan; Xin Liu |
Microwave-Assisted Synthesis of 2-(2-Nitroethenly)thiophene from 2-Thiophenecarboxaldehyde and Nitromethane / Jun De Xing; Zhi Liu; Zhao Yu Zhang; Xiao Fei Jia |
Research on Machining Accuracy in Milling Ti6Al4V Thin-Walled Component with Paraffin Reinforcement / Biao Gao; Jie Sun; Jian Feng Li |
Surface Modification of the Polyethersulfone Membrane by Low Pressure Argon Plasma Treatment / Ru Li; Ji Fei Deng; Fen Fen Liu |
The Analysis of the Influence of Perforating Parameters on the Strength Security of Perforation String / Fei Xu; Ming Fei Li; Yi Hua Dou; Fu Xiang Zhang; Xiang Tong Yang |
The Casting Process Optimization of the Impellor of 65KZL Slurry Pump / Ying Jie Yin; Xing Mao Yuan |
Electrical and Optical Characterization of Cold Atmospheric Pressure Plasma Jet and the Effects of N2 Gas on Argon Plasma Discharge / Vinita Sharma; Katsuhiko Hosoi; Tamio Mori; Shin-ichi Kuroda |
Influence of Initial Temperature of Chilling Treatment on Residual Stress State of TIG Dressing Zone for T-Joint Welded Toe / Chun Yuan Shi; Ping Zhu; Kun Zhou |
Ignition Temperature and Stable Combustion Temperature of the In Situ Combustion Process / Da Zi Qu; Yong Jian Liu; Ke Ming Xu; Long Dong; Wei Wei Liu |
Copper-Based Mixed Oxides Catalyst of Water-Gas Shift Reaction for Fuel Cells: The Role of Alkali Charge / Ke Duan Zhi; Quan Sheng Liu; Run Xia He; Fang Wu; Ya Gang Zhang; Li Yang |
Analysis of HDPE Crystallization for Axial Symmetric Cast / Yi Huan Xie |
Indoor Study of Viscosity Reducer for Thickened Oil of Huancai / Qing Wang Liu; Xin Wang; Zhen Zhong Fan; Jiao Wang; Rui Gao; Ling Da Kong |
Fluorescence Spectrum of CdTe Quantum Dots Solution in Ostwald Ripening Process at Room Temperature / Li Min An; Xue Ting Han; Xuan Lin Chen; Shao Hong Gao; Xi Ping Cai; Xu Fu; He Zhu; Jian Nan Liu; Xiang Chun Xi; Pu Nan Sun; Hong An Ye; Zhuo Sun |
Preparation and Characterization of High-Substituted Cationic Starches in Aqueous Solutions / Xiu Li Wu; Ya Cui Guo; Pi Xin Wang |
Enhancement of Explosion Energy and Mechanical Strength of Energetic Material by Aluminum Fibre / Xue Yan Liao; Fu Qiang Shi; Zhao Wu Shen; Yao Gang Jiang; Zhi Gang Gong |
Wear Analysis of Silicon Nitride (Si3N4) Cutting Tool in Dry Machining of T6061 Aluminium Alloy / Tasnim Firdaus Ariff; Nurul Syamira Shafie; Zamzahariah Mahamad Zahir |
Patent Analysis on Graphene Materials in Lithium-Ion Batteries / Jia Liu; Ming Hui Zhang; Chao You; Min Su; Zhi Yong Tang; Peng Liu |
Study on Modification of UFRA by Enzyme Hydrolysis Prepared Oxidized Starch / Rui Hang Lin; Xiao Bo Wang; Xiao Feng Zhu; Zhen Zhong Gao |
Preparation of PCL/PVP/Ag Nanofiber Membranes by Electrospinning Method / Yong Tang Jia; Cui Wu; Feng Chun Dong; Gang Huang; Xian Hua Zeng |
Research and Development of the Low Twist Yarn / Hong Li; Run Jun Sun; Jie Dong; Cheng Kun Liu |
Influence of the Catalyst on the Synthesis of SIPE / Li Tao Guan; Chong Ling Yang |
Preparation and Application of Carboxymethyl Starch / Xiao Hua Huang; Lin Li; Jin Yu Wang; Guang Zhi Zhang; Xu Chen Tao |
Effect of Physical Factors on Viscosity of Polyacrylamide Solution Prepared by Oilfield Produced Water / Shi De Feng; Dan Dan Yuan; Jing Dong; Shu Qing Ma; Xin Sui; Hong Jun Wu; Bao Hui Wang |
Application of Twin Screw Extruder in Cellulose Dissolution with Ionic Liquid / Magdi E. Gibril; Hai Feng Li; Xin Da Li; Huan Li; Xuan Zhong; Yue Zhang; Ke Qing Han; Mu Huo Yu |
Flow Characteristics of DC Plasma Torch Controlled by Magnetic Field / Jian Ping Wei; Da Pei Tang |
The Test of Amine Polymeric Alcohol Drilling Fluid System in Baka Block / Yu Xue Sun; Bo Xu; Yu Ning Xie |
Interpretation of the Early Hydration Procedure of Standard Cement Materials by Electrodeless Resistivity Method / Yu Tai Liu; Feng Xing; Bi Qin Dong |
Application of Magnesia-Phosphate Cement for Chromia/Alumina Castables / Jing Ming Zhao; Kyu Hong Hwang; Jong Kook Lee; Min Cheal Kim |
Cyclic Triaxial Tests of Saturated Clay and Stability Numerical Analysis of Inland Waterway Slope under Effect of Ship Wave / Yuan Zhan Wang; Xu Fei Liu; Zhi Kai Zhang; Dian Guang Ma |
Geological Significance of Rare Earth Elements in Chinese Mount Huaying and their Applications / Wei Yi; Hong Jun Wang; Ting Zhou |
An Empirical Correlation between Unconfined Compression Strength and Curing Time for Cement-Soil / Ying Di Liao; Chao Hua Jiang; Xing Guo Feng |
Seismic Vulnerability of Existing RC Buildings and Influence of the Decoupling of the Effective Masonry Panels from the Structural Frames / Fabio de Angelis; Donato Cancellara |
Study on the Technique of Filling Paste into Mine Goaf with Building Waste / Yin Liu; Wei Jia Guo; Jun Tao Chen |
Analysis of Waterproof Bonding Layer in Permeable Asphalt Pavement / Xiao Ge Tian; Ying Liu |
Continuous Belt Mucking Technology of China Railway Tunnel Construction / Ya Ting Sun; Zhi Rong Mei; Jun Wei Zhang |
Influence of Deep Foundation Pit Construction to the Surrounding Buildings - Take a Foundation Pit in Haikou as Example / Ji Nan Zou; Bei Te Cai; Hong Wei |
Influential Factors and Structural Reliability / Muhammad Abu Eusuf; Abdullah Al Hasan |
The Effect on the Dynamic Tests of Prestressed Concrete Simply-Supported Beams Caused by Bearing Constraints / Jun Liu; Zhen Fu Chen; Yuan Chu Gan; Qiu Wang Tao; Wei Liu |
FEM Analysis on a New Type of Anti-Tension Device / Chao Yong Shen; Xiang Yun Huang; Min Hui Zhou |
Test and FEM Analysis on a New Type of Anti-Wind Device / Chao Yong Shen; Yu Hong Ma; Min Hui Zhou |
Response and Parameter Analysis of Reinforced Retaining Wall under Earthquake Loading / Jia Liang |
Shear Wall Construction in Buildings: A Conceptual Framework on the Aspect of Analysis and Design / Muhammad Abu Eusuf; Khairuddin Abdur Rashid; Wira Mohd. Noor; Abdullah Al Hasan |
Constitutive Behavior of Salt Rock Coupled of Creep Deformation and Damage Development / Zhong Jun Ren |
The Numerical Simulation and Optimization of the Pre-Splitting Crack's Length in Underground Deep Hole Blasting / Fu Liang Jiang; Yu Sheng; Xiang Yang Li; Mei Qiong Xia; Jing Zhan |
Analytic and Numerical Solutions of Load and Stress of Casing and Cement in Cementing Section / Zhan Qu; Xiao Zeng Wang; Yi Hua Dou |
A Double Inequality Method for Calculate the Loading Capacity of a Sheet Pile DIMSP |
Elastic Seismic Response of Steel-Concrete Composite Frames with Partial Interaction / Jin Xi Duan; Zhi Qiang Shen |
An Analysis of the Collapse Strength of Down-Hole Tubings Loaded by Axial Compressive Forces and Bending Moment / Jiang Wen Xu; Hao Zhang; Yi Hua Dou; Xiao Zeng Wang |
Analysis of Premium Connection of Connecting and Sealing Ability Loaded by Axial Tensile Loads / Yang Yu; Yi Hua Dou; Fu Xiang Zhang; Xiang Tong Yang |
Modeling the Mechanical Behaviour of a Subsea Guide Base Subject to Installation and Operations Loads / José Felipe Braz; Luiz Eduardo Nicolini do PatrocÃnio Nunes; Francisco José Grandinetti; José Rui Camargo; Valesca Alves Correa |
Experimental Study on PC Beams Dynamic Performance with the Itial Effective Prestress / Shou Yu Cheng; Dong Jin Yan; Yan Zhao Li; Jin Ming Zhai; Qing Hua Cai; Guo Xing Xu |
Comparative Study on Ultimate Pullout Resistance Test and Theoretical Derivation of Flexible Pressurized Anchor with Numerical Simulation Result / Xuan Li Zhang; Wen Bin Wei |
The Coupled Effects of Thickness and Distance between Holes on Stress and Strain Concentrations of Uniaxially Loaded Tensile Plates / Zheng Yang |
The Interaction of Holes on Stress and Strain Concentrations in Uniaxially Loaded Tensile Plates |
Fractured Reservoir Blocking Dosage Calculation Method / Shuo Liang Wang; Yang Ming Liao; Huang Chang Xie |
Experimental Study on Capability of EPS Beads-Mixed Lightweight Soil / Su Qi; Shu Hao Liu; Ye Zhang; Guang Li Xu |
Hybrid Effects on Strength of Steel-Polypropylene Hybrid Fiber Reinforced Concrete under Uniaxial and Triaxial Compression / Guo Dong Mei; Li Hua Xu; Shu Li; Yin Chi |
Effect of Dynamic Compaction on Red Sand Soil Filling Embankment / Chong Chen |
The Influence Factors of the Workability of Roller Compacted Concrete |
Study on Cumulative Damage of Tunnel Shotcrete under Blasting / Hai Peng Ma; Xi Bing Li; Ke Bin Li; Ming Can Qiu |
Study the Axial Force-Time History of Reinforced Retaining Wall under Earthquake Loading |
Effect of Admixtures Rich in Aluminium on Expansion due to Alkali-Silica Reaction / Xiao Xin Feng; Yuan Jia; Chen Guang Hu |
Application Performance of Aminosulphonic Acid-Based Superplasticizer / Feng Wei He; Tong Lui; Ya Qin Zhang |
Effects of Adding Method of a Novel Haxogen-Free Flame Retardant Agent on the Properties of Wood-Plastic Composites / Wang Wang Yu; Tao Huang; Dong Xue; Lu Jing; Wen Lei; Peng Si |
Preparation of Calcium Sulfate Whisker by Hydrothermal Method from Flue Gas Desulfurization (FGD) Gypsum / Liu Shuan Yang; Xiao Wang; Xin Feng Zhu; Ling Zhi Du |
Discussion on Anchor Structures' Deterioration Analysis Parameter Caused by Reinforcement Corrosion under Erosion Environment Condition / Wan Tao Ding; Jin Hui Liu; Shu Cai Li |
The Development and Application of Slug Test in Hydrogeology / Xiao Qiong Deng; Ji Dong Su |
Finite Element Analysis and Optimization of S1110 Diesel Engine Body / Sen Zhao; Xiao Hui Cao |
Hydraulic System Simulation Analysis of Shearer's Cutting Part Based on AEMSim / Li Rong Wan; Xing Hua Wang; Jian Liang Li; Bin Zhang; Xian Peng Li |
An Assembly Process Model Involved Resource for Complex Products / Gang Sun; Yuan Li; Jian Feng Yu; Jie Zhang; Liang Dong |
Simulation and Optimization to Vehicle Interior Noise in Mid and High Frequency Using VAone / Xin Chen; Chang Feng Gao; Xiao Hua Geng; Chen Xie |
Mechanical System Simulation Analysis of Shearer Cutting Unit Based on Adams / Qing Liang Zeng; Bin Zhang; Jian Liang Li; Xing Hua Wang; Zai Chao Wu |
McPherson Suspension Simulation Analysis Method Based on ADAMS / Xing Jia Yao; Cheng Yin Xu; Tie Qiang Ma; Xiao Tong Zhang |
CNC Machining Simulation and Optimization Based on CATIA and VERICUT / Xiao Guang Ruan; Han Xin Cao; An Jiang Cai; Fu Yang Li; Rong Rong Zhao |
Structural Parameters Optimization of Waveform Generator Based on LS-SVM and Simulated Annealing Algorithm / Yu Liang Yang; Jun Qi Qin; Chang Chun Di; Yan Feng Yang |
The Casting Process Optimization of the End Blade of ZLT1200 Axial Flow Pump |
Research on the Model Reconstruction and Rapid Prototyping of Lumbar / Xue Jin Cheng; Yu Fu Zhu; Pei Xu; Sen Lin Li |
Analysis of Acoustic Characteristics of a Car Cabin Using Computer-Aided Engineering / Juan Gomez; Justin Williams; In Hyouk Song; Yoo Jae Kim; Du Hwan Chun; Deok Ki Kim; Hae Joong Na; Byoung Hee You |
A New Design Method with CAD Software for Fruit Packaging Machinery / Huawei Duan; Xiao Dong Li; Xiu Duan Gong |
Overload Characteristics Analysis of Electromagnetic Release with Oil Dashpot Based on ADAMS / Hui Juan Guo; Xiu Ping Su; Yi Tao Zhang |
Numerical Simulation of Combustion Process in a 350t/d MSW Incinerator / Shui E Yin; Jun Wu |
Simulation Study of Space Spiral Gas-Liquid Separation Technology / Ping Jun Si; Hua Wang; Cun Yan Cui; Yuan Chen |
UG-CAM Point Processing with NC Machining Simulation Software of Integrated Application / Fan Xie; Ying Liu; Zhan Dong Liu; Mgambo Sharifa |
Dynamic Analyses of the Structure of the Horizontal Broaching Machine Based on Software of ANSYS / Hu Ming Xu; Jin Yuan Tang; Xuan Tao |
ANSYS Analysis of Heat Model for the Electromagnetic Drying Cylinder / Zheng Shun Wang; Wen Jia Han |
Optimization Design of Towbarless Aircraft Tractor Frame Based on ANSYS Workbench / Li Wen Wang; Qiang Wang; Wei Zhang |
Development of Parrametric Modeling for the Spindle of NC Milling Machine Based on ANSYS / Ling Liu; Hui Bing Li |
Energy Storage Control Based on Wind Farm / Xiao Dong Wang; Jin Hua Zhu; Ying Ming Liu; Hong Fang Xie |
A Survey of Chaos in Photovoltaic Power System / Xue Song Zhou; Xue Bo Shen; You Jie Ma |
The Synopsis of Stability in Wind Power Systems Based on Bifurcation Theory / You Jie Ma; Yu Zhang; Xue Song Zhou |
Study the Thermal Impact of Massive Waste Material to Building Construction / Muhammad Abu Eusuf; Abdullah Al Hasan; Sharonee Sidek |
Study on Cohesive Zones in COREX Melter Gasifier Using Hot Model / Ye Sun; Guo Xi Wu; Ren Chen; Li Na Sun; Li Hao Han |
Study on the Importance of Wind Energy Development / Zhi Qiang Xu; Kai Guo Qian |
A New Assessment Method for Energy Consumption of Thermal Power Unit / Bin Luo; Rui Ma; Yuan Xin Chen; Gui Lin Xu |
Study the Heat Sink Potential of Building Ground Floor Slab Integrated with ELT / Abdullah Al Hasan; Muhammad Abu Eusuf |
Research on Simplified Reverse Method for Interfacial Heat Transfer Coefficient (IHTC) / Li Ping Su; Jian Min Zeng; Jun Chen; Wu Kui Gan |
Construction Technology and Economic Analysis of Ground-Source Heat Pump System / Zhi Yang Yuan |
Modeling and Simulation of Induction Heating with Magnetic Flux Concentrator / Feng Li; Xue Kun Li; Tian Xing Zhu; Qian Zhe Zhao; Yi Ming Kevin Rong |
The Stirring and Heating CFD Simulation Strategic Research on Food Waste Biological Treatment Processor / De Yu Song; Song Lin |
Design and Analysis of the Structure of the Fan Blade Maintenance Platform / Ke Zhang; Chun Mao Yu; Shi Zhong Chen; Yu Hou Wu |
Design of the Shape of Blade of the Semi-Submersible Ocean Current Power Generation Device Based on Fluent / Li Zhen Zhang; Xiao Long Cao; Feng Zhen An |
Study on Low-Carbon Catalytic Combustion Furnace of Natural Gas / Si Yu Huang; Long Fei Yan; Shi Hong Zhang |
Method and Technique of Grade Recovery and Cascade Utilization (GRUC) Based on Sintering and Cooling Integration / Guo Wei Xie; Peng Li; Hui Dong |
Research on Collaborative Operation System of Wind Power and Electric Vehicle / Lu Cheng; Rui Ma; Hai Wei Lu; Hai Yang Ma; Xiao Feng Gao |
Adaptive Vibration Control of Beraingless Permanent Magnet Synchronous Motor / Tao Zhang; Wei Ni; Sha Sha Wu; Hui Ping Zhang; Jian Xiang Ji |
Experimental Research of Heat Dissipation of Notebook / Du Ying Wang; Mao De Li |
Based on Mechanical Clamping Device Lever Force Amplifier by Linear Motor / Yi Yang; Yi Bo Zhong |
Reliability Design and Wear Extent Determination of a Cam Mechanism / Yi Yuan Ge; Jun Fa Wang; Gui Lian Wang; Ya Qin Li |
New Construction Technology for Condenser Shell Module of Large Scale Nuclear Power Station / Yong Jun Xia; Yan Long Wang; Yan Hui Yin; Qian Miao |
Kinematic and Dynamic Simulation of Automotive Manual Transmission / Wen Shan Wang; Jing Xu; Zai Xiang Zheng |
Study on a Modifying Method of Finite Element Model for Analyzing the Shaft Rotation System / Xu Xing Jin |
Rigid-Flexible Coupling Dynamic Analysis of Excavator Drive Axle / Jin Ze Li |
Axial Force Test and Analysis in Riveting Assembly of Automotive Hub Bearing Unit / Yun Ya Xiao; Zhi Xiong Zhou; Wei Li; Guo Fei Meng |
Study of the Dynamic Behavior of Face Gear Transmission System / Zhi Wang; Qing Chen; Jia Chun Lin; Li Li Yang |
Analysis of Temperature Field and Thermal Deformation for Lubricating Oil Transfer Pump / Jian Ning Xu; Wen Jie Lv; Bin Zhu; Duan Yin Zhu; Yan Xiong Gao |
Method for Measuring Surface Mobility of a Finite Plate Subject to a Uniform Velocity Excitation / Jue Dai |
Analysis of Structure Dynamic Characteristics of a Metal Plate / Chen Zhang; Zhi Gang Yang; Yin Zhi He |
Computational Analysis of Stress Field and Contact Pressure for Rubber Seal Based on Non-Linear Finite Element / Jian Bing Sang; Li Fang Sun; Su Fang Xing; Dong Ling Zhang |
Effects of Surface Tension on Drop Impact on a Horizontal Rotating Disk / Xiao Fang Yuan; Jing Yin Li; Bin Zhang |
Application of the New Interpolation Functions on Topology Optimization of Continuum Structure for Static and Mode Analysis / Kai Long; Dong Sheng Wang |
Hamiltonian Duality Equation on Three-Dimensional Problems of Magnetoelectroelastic Solids / Xiao Chuan Li; Jin Shuang Zhang |
On Spiral Spring in Elastic Deformation / Long Han Xie; Ruxu Du |
Simulation and Evaluation of Wind-Induced Displacements of the Giant Airship in its Outbound Process / Gai Juan Wang; Yuan Ying Qiu; Xin Wen Zhao |
Influence by Casing Geometric Imperfection on Anti-Collapse Strength with Finite Element Calculation / Ji Jun Xue; Peng Wang |
Flow Characteristics of Viscoelastic Polymer Solution in Expansion Micro-Pores of Different Pore-Throat Ratio / Jing Fu |
The Analysis and Simulation of Granule Concentration Distribution in Cross Section of Spiral Slurry Pipeline / Yu Lin; Ping Lei; Xiao Dong Zhang |
Effect of Exhaust Nozzle Diameter on Internal Flow Field Characteristics in Base Bleed Unit Simulator / Yong Jie Cao; Yong Gang Yu; Rui Ye; Yu Rong Zhang |
Molecular Dynamics Simulation of Nanoscale Sliding Friction Process between Sphere and Plane / Xiao Jing Yang; Sheng Peng Zhan; Yi Lin Chi |
Direct Numerical Simulation on Transition of an Incompressible Boundary Layer on a Flat Plate / Ning Li; Qi Hong Zeng |
Stress Concentration Calculation of Silo Wall Opening Subjected to In-Plane Tension or Pressure / Rui Ting Ma |
Experimental Investigation of the Edge Stress of Sphere-Cylinder Combined Shell / Xu Bai; Xiao Tian Wang; Li Ping Sun; Guo Dong Hu; Jin Hua Li |
Phase Transition Determinated by Weighted Monte Carlo Simulations / Qing Xin Yuan; Zhan Wei Wang; Yin Xiao Du; Fan Guang Zeng |
A Simple Co-Rotational Finite Planar Beam Element of Geometrical and Material Nonlinearity / Song Bai Cai; Da Zhi Li; Chang Wan Kim; Pu Sheng Shen |
Error Analysis in Calculating the Internal Force of Plane Statically Determinate Truss by the Original Size Principle / Dan Ma; Yan Dong Qu; Xiang Qing Kong |
Numerical Studies of Aerodynamic Performance of Gapped Flat Plates at High Angle of Attack / De Tian; Wei He; Wei Long Wang |
Vibration Analysis of an Axially Moving Viscoelastic Beam / Feng Qun Zhao; Miao Miao Wang |
Study of the New Exact Solutions of a (3+1)-Dimensional Nonlinear Evolution Equation / Ma Biao Zhang |
Variable Separation Solutions for the (2+1)-Dimensional General Ablowitz-Kaup-Newell-Segur Equation / Jun Lei; Song Hua Ma; Jian Ping Fang |
Sectionalized Mechanical Models of Drilling Tool of Trenchless Directional Drilling / Hui Xia; Yi Hua Dou; Xin He Wang; Jiang Wen Xu |
The Analysis of Pulse Pressure by Vascular Strain / Ming Chang Tsai; Shyh Chour Huang |
Analysis of Stress-Strain Distribution for Wire Rope of Traction Hoister / Yu Hou Wu; Jia Sun; Ke Zhang |
Experiment Research on Influence of Mud Density to Wear Resistance of TP140 Casing / Xin He Wang; Yi Hua Dou; Xiao Zeng Wang; Jing Wen Yang |
Productivity Prediction of Horizontal Well with Sulfur Deposition in Sour Gas Reservoir / Jing Hong Hu; Zhi Ping Li; Lei Wang; Ling Ye Meng; Ju Hong Lu |
Experimental Research on Degradation of Adhesively Bonded Box Beam under Cyclic Torsional Loads / Qing Feng; Jing Fen Zhang; Martin Hornung; Juergen Becher |
Optimal Coupled Inversion for Jet Parameters in Flowing Ambient Fluid / Ming Chang Li; Guang Yu Zhang; Qi Si; Shu Xiu Liang; Zhao Chen Sun |
Strength Analysis of Roller-Metallic Membrane Coupling / Liang Shen Wang; Hong Tu Sun; Pin Wang; Jie Hou; Zai Yu Xie |
The Spatial Linkage Analysis and Synthesis of the Vector Fitting Method / You Liang Xu |
Research on the Door Buckling Strength of Turbine Tower of HAWTs / Kai Long; Ji Xiu Wu |
The Dynamic Simulation of a Long Distance Natural Gas Pipeline / Shan Bi Peng; En Bin Liu; Xiao Chun Du; Rong Lin Hong |
Spring's Multi-Objective Optimal Design in Pre-Positioned Fixture of Shaft Pressing and Assembling Machine / Zhi Feng Deng; Zi Qiang Zhang; Run Dian Li |
Development of 4UMS-2700 Cassava Harvester / Hui Huang; Zhen De Cui; Zhong Xue; Yuan Zhang |
Vibration Experiment of Shearer Walking Unit / Song Yong Liu; Chen Xu Luo |
Hybrid Excavator Shafting Torsional Vibration Analysis / Zhong Hua Huang; Ya Xie; Yi Deng |
Influences of Main Parameters on Performance of Seed-Filling Device in Plot Seeder / Shu Guang Liu |
Rocker Mechanism Study of Crank Angle between Extreme Positions / Hui Su |
Research on Sag and Phase-Phase Space Change by Installing Interphase Spacers for Transmission Lines / Qing Hai Lin; Yuan Xi Yao; Lian Bo Tian |
Research on the Design Loads of a Surface Warship / Zhan Yang Chen; Hui Long Ren |
Research on Combination Anti-Galloping Method between Interphase Spacer and Rotary Clamp Spacer for Transmission Lines / Bin Liu; Kuan Jun Zhu; Hai Jun Niu; Xue Ping Zhan; Xin Min Li; Yu Xian Di |
R&D of Equipment for Deicing by Thermal Water-Jet and Mechanical Deicing Method / Jian Zhao Zhou; Si Wei Lai; Xiao Pan Xu; Yun He Chen; Wei Jun Chu; Ya Ming Gao |
Aerodynamic and Structural Design of Composite Wind Turbine Blades / Guang Hua Chen; De Tian; Ying Deng |
MOSFET Modeling Based on Electromagnetic Interference (EMI) / Tian Peng Yang; Qi Shuang Ma |
Constraint Optimization of a Novel Flexure System with Two Rotation Freedom Degree / Sheng Lin; Chun Wang; Shi Jun Zhou |
Chaos in a Circuit System with Ferroelectric Capacitor / Wei Qiao |
Analysis & Study of Harmonics' Impact on Analog Integrator's Calibration / Xiao Feng Wei; Wei Dong |
KED Modeling of PLS Mechanism / Yong Peng; Xiao Xu Bai |
Experimental Study on Vibration of Pure Electric Bus / Hui Bin Li; Man Yang; Ya Ru Liu; De Quan Jin |
The Design of an Electromagnetic Damping Vibration Absorber / Xue Jian Jiao; Yu Zeng Zhang; Shan Chai |
Design of Low Voltage Cell Fusion Instrument / Feng Jiang; Jun Yu; Jian Jun Chen |
Simulation of Power Transformer Windings Displacement Caused by Multiple Short-Circuit Forces / Hong Kui Li |
Auto-Bäcklund Transformations Derived via the Implicit C-D Pair / Xiao Li Wang; Jian Qin Mei; Zhen Hua Wu |
The Gear Modification of Wind Gearboxes High-Speed Gears on Romax Software / Dan Liu; Xiao Long Li; Chun Xiu Wang |
The Temporal Diffraction Characteristic of a Femtosecond Laser Pulse by a Serrated Aperture / Huai Sheng Wang |
Evaluating nMOSFET ESD Protection Designs: An Overview / Shen Li Chen; Guan Jhong Chen |
Power MOSFET Devices and ESD Reliability Evaluations / Shen Li Chen; Wen Ming Lee |
Design on Stepping Type Heating Furnace Control System / Yan Wang; Cheng Lin Liu; Bin Lu; Meng Xia Pei |
Inverted Pendulum System Modeling and Fuzzy Neural Networks Control / Hao Yu |
Electric Characteristic of Steel-Making Electric Furnace and the Process Control / Oleg Y. Sheshukov; Ilya V. Nekrasov; Andrey V. Sivtsov; Mikhail M. Tsimbalist; Aleksandr I. Stepanov; Denis K. Egiazaryan; Vladimir V Kataev |
The Error Analysis and Compensation of Two-Dimensional Precision Positioning Platform / Mu Cheng Zhu; Xian Peng Luo; Ya Ping Wang |
High-Low Voltage Drive of Asynchronous Motor Based on PLC Software Circular- Allotting / Juan Wang |
A Review of Static Synchronous Compensators (STATCOM) / You Jie Ma; Yi Li; Xue Song Zhou |
Machine Vision-Aided Quality Decision System for Solder Joint Defect Evaluation / Chien Chih Wang |
The Linkage Analysis of Electric Load Characteristic Statistical Indexes Based on VAR / Xie Zhou; Rui Ma; Dao Xin Liu; Zi Jian Wang; Jun Wang; Hui Ming Xu; Xi Liang Wang |
Design and Simulation of the Temperature Control System of Agricultural Product Baking Equipment / Jun Liu; Zhen Wei Jia; Rong Xing Guo |
Characteristics Identification of Straightness Error on Error Separation Technique / Li Ling Huang; Fu Gui Huang |
Research on the Forward Kinematics of Stewart Platform Using Memetic Algorithms / Yu Hui Zhang; Li Wen Guan; Li Ping Wang; Yong Zhi Hua |
Research on Capture the Maximum Wind Energy Base on Fuzzy PID Controller / Ying Ming Liu; En Yong Yi; Xiao Dong Wang; Hong Fang Xie |
Research on a Dynamic Binary Stack Anti-Collision Algorithm / Jian Jun Yi; Fei Luo; Shao Li Chen; Bai Yang Ji; Hai Xu Yan |
Design of Steeping Control System for Corn Wet Milling Process / En Yao Huang; Dong Tao Wang; Ya Jun Qiu |
Research on the Adaptive Cutting Method of Roadheader / Wen Lin Yang; Zhong Bin Wang; Bing Lei Yan |
The Fault Detection and Diagnosis System of Hydraulic Excavator Based on PXI Interface Technology / Liang Mi; Keng Feng; Huan Liang Li; Li Fu Shao |
Control of the Mobile Robot Based on the Mobile-C Mobile Agent / Wei Min Ge; Chuang Li; Nan Zhang; Xiao Feng Wang |
Finite Element Analysis of Electromagnetic Device in Magnetorheological Fluid Brake / Guang Jie Xiong; Ling Li |
Second Development of Keller Based on Double-Arc Method / Yan Chen; Lin Zhu |
Considerations on Designing Artificial Muscle Working at High Pressure / Li Chao Wang; Xiao Dong Wang |
Review on the Development of the Accessory Rotary Ultrasonic Machining Tools / Xue Ming Zhu; Bin Lin; Li Ping Liu |
Process Optimization of CNC End Milling of Integral Impeller Channels / Qiang Li; Ling Jiang Ouyang |
Research of the Impact on Distance between Thermal Wires and Nozzle for Fluidic Gyroscope / Bao Li Zhang; Lin Hua Piao; Jin Tang; Chuan Zhi Mei |
PWM Design for Active Suspension without External Energy Supply Based on LQG Control / Shian Chen; Xuan Li; Sheng Wang; Jian Lian Zhao; Ze He Tang |
Multidisciplinary Collaborative Optimization of General Parameters of Low Orbit Spacecraft / Le Feng Sun; Bai Nan Zhang; Rui Nie |
Design of Intelligent Guide Vehicle for Blind People / Xiao Wen Xu; Jin Yi He |
Research on Vacuum Consumable Arc Remelting Furnace Drop Testing System for Thyristor Power Supply / Guo Yun Lv; Shui Xian Hu |
Application of FMECA Method to Improve the Reliability of a CNC System / Tien Long Nguyen; Yi Qiang Wang; Er Hu Zhang |
Unbalance Compensation Control in Active Magnetic Bearings Using Bias Current Excitation |
Milling Process Optimization Based on Data from Industrial Shop Floor / Nivaldo Lemos Coppini; Daniel Benedito da Rosa; Edson Melo de Souza; João Honorato; Gerd Erwin Ernst Gojtan |
Study on Control Characteristics of Driving and Lifting System for Logistics and Loading Machinery / Guo Jin Chen; Ting Ting Liu; Ni Jin; You Ping Gong; Huo Qing Feng |
The Application of System Parameters in Eliminating Oscillation and Improving Machining Accuracy of CNC Machine Tool / Rui Yi Liu; Jun Huang |
Rotor Vibration Control of Active Magnetic Bearing System Using Adaptive Forced Balancing Method |
Cartesian Impedance Control for Space Robotic Arm Based on End Force/Torque Sensor / Xiao Xing Dong; Ge Li; Geng Feng Liu; Jie Zhao |
Modal Analysis and Design of a Vertically Movable Gate Field Effect Transistor (VMGFET) Proposed for Low-Frequency Sensing Applications / Justin Williams; William B.D. Forfang; Byoung Hee You; In Hyouk Song |
Study on the Degree of Strain Uniformity of a new FBG Accelerometer / Jun Shao; Zhen An Jia; Jun Hua Liu |
Design of a MEMS Temperature Difference Suspended Structure Gas Flowmeter / Hui Li |
Dioptric Fisheye Panoramic Camera Calibration Based on Unifying Spherical Projection Model / Ke Wang; Liang Liang Wang; Li Jun Zhao; Rui Feng Li |
Influence of Sensitive Cavity Structure on the Resolution of Fluidic Gyroscope |
Influence of Thermal Wires Position on Fluidic Gyroscope with Different Cavities |
The Application of Modern Electronic Technology to Automotive Engine / Qian Xing |
USB Communication Interface Design Based on the PDIUSBD11 / Ming Xin Tang; Jue Xiu Xu |
Design and Implementation of RAM Operation Conflict Arbiter IC in LED/LCD Display Control System / Zhao Jie; Fei Yu; Jing Xia Wang; Liu Li |
Design and Implementation of LED Display Screen Controller Based on STM32 and FPGA / Chi Zhang; Xiao Guang Wu; Cheng Jun Zhang |
Padé Approximation Method for FDTD Modeling of Wave Propagation in Dispersive Media / Wei Chen |
The Study on Detecting Failure in the Metal Beam Based on AE Parameters / Mei Yun Zhao; Xiao Ni Kang |
Real-Time Monitoring of Acetaldehyde in Air by Cataluminescence-Based Gas Sensor / Kao Wen Zhou; Chun Xiu Gu; Dong Ping Ma; Hui Cao |
Design of Portable Instrument for the Concentration of Potassium Ions in Human Vitreous Humor to Estimate the Postmortem Interval / Xiao Wen Xu; Sheng Qiao Xu |
Fault Mode Identification of Engine Based on Audible Sound / Da Yong Ning; Chang Le Sun |
Pulse System Based on Noise Detection System Research / Xin Zhang; Chun Xiu Wang |
Study on a Novel Testing System for Aerodynamic Performance of Magnus Wind Turbine Blade / Qi Yao; Ying Xue Yao; Liang Zhou; Jin Ming Wu; Jian Guang Li |
Testing of Anchored Rock Bolt with Ultrasonic Guided Wave / Wen He; Qing Sheng Liu; Qi Rui Huang |
The Piezoelectric and Piezomagnetic Effects on the Surface Wave Speed / Li Li; Yi Wen Wei; P.J. Wei |
The Study of Infrared Photocarrier Radiometry Based on Si Semiconductor / Lei Qin; Jun Yan Liu; Yang Wang |
Composite Evaluation Using Contact and Non-Contact Ultrasound Excited Thermography / Li Chun Feng; Da Peng Chen; Zhi Zeng; Ning Tao |
Key Technology in Thermal State Measurement Based on Structured Light Stereo Vision Technique / Chi Zhang; Zhong Wei Li; Yu Sheng Shi |
Measurement and Analysis of Knitting Fabric Pressure / Xiao Xia Song; Zheng Yan Xu |
tHcy Detected by High Performance Liquid Chromatography will be a Dangerous Factor for the Invasion of Occlusive Vascular Disease / Hong Yan Zhou; Wen Song Zhang; Ji Long Hao; Shuang Wang |
Study of Flying Projectile's Properties of Infrared Radiation / Yue Ying Lv; Ying An |
The Design and Implementation of the Iron and Steel Industry Sales System Based on Business Intelligence / Hong Bo Ren; Yu Wang; Rong Luo; Ji Min Yu |
Research on XML Based Flexible Web Application Design / Chuan Sheng Zhou |
Analysis and Implementation of MPEG-4 Motion Codec / Yun Peng Liu; Ren Fang Wang; Jin Li |
Data Aggregation Scheme for WSN with Privacy Protection / Zhi Chu Zhong; Jiang Hong Guo; Hai Feng Zhang |
Simulation of Pattern on Computerized Embroidery Based on Image Processing / Xiu Juan Fan; Shao Lin Hu |
Adaptive Resource Allocation for the Multi-Carrier GIS Networks / Ying Yang |
Direction Based Project Developing for Building Web-Services / Ying Liu |
Research on Aircraft Communication and Satellite Link Handoff Simulation for Spatial Information Network / Xiao Guo Ye; Ru Chuan Wang |
A Vague Words Retrieval Method in a Relational Database / Rui Wang; Ping Gu; Jian Min Zeng |
The Research of CR-Based Underwater Wireless Network / Yi Peng; Hua Long; Yu Bing Shao |
Deterministic Bounds on Performance of Self-Similar Network Based on ETS / Ming Chai; Ping Gu; Yue Ping Cui |
The Design and Realization of Real-Time Three-Dimensional Visualization System for Industrial Computed Tomography Based on GPU / Qian Li Wang; Jian Fu; Ren Bo Tan; Li Yuan Chen |
The Implementation and Application of Information Management System of Commercial Vehicle Technical Performance Database Based on J2EE / Guo Liang Dong; Fu Jia Liu; Xue Li Zhang |
Study on Optimization of Software Regressive Testing Based on RBF Neural Networks / Wen Le Bai; Yong Mei Zhang; Bin Song |
Design and Implementation of EPON Network Management System Based on RIA / Sen Pan; Bin Hu |
An Image Compression Algorithm Based on Multilevel B-Spline / Yi Wei; Yan Cheng Liu; Chang Zhi Wang; Hai Ping Lv |
A Granular Computing Based Decision Tree Algorithm and its Application in Intrusion Detection / Cheng Hua Wang; Lin Zhou; Feng Jiang; Hong Bo Zhao |
Estimating Weights of Evaluation Factors on Basis of Monte Carlo Simulation / Yan Fei Tian; Li Wen Huang |
Sales Impacts of Location Based Advertising Using Wireless Communication Technology / Zong Jin Liu; Yang Yang; Zheng Fang; Jing Cai |
Based on Texture Feature of Color Image Retrieval / Jin Hui Lin; Ji Xiang Zhang |
Decision Tree Technology in Data Classification / Hong Yan Zhao |
Customer Demands Data Acquire Algorithm Research / Jun Tan |
Attacks to Li et al.'s Billing Service User Authentication Scheme / Wen Gong Shieh; Mei Tzu Wang |
The Strategic Interaction on Endogenous Infinite Lattice and the Simulation / Chun Rui Chen; Hong Wei Gao; Gui Rong Wang; Kang Li; Ping Hu; Kun Wang |
Steam Turbine Remote Maintenance Service Support Technology Based on RFID / Yu Feng Ding; Yu Qun Zhang |
An Artificial Immune Algorithm and its Application in AVO Inversion / Hai Yan Zhang; Zi Li Liu |
Artificial Neural Network for 4D Reservoir Modeling System Design / Liu Mei Zhang; Tian Shi Liu; Shao Wei Pan |
The Study on Software Fault Tolerance / Li Qing Li; Hai Lu; Xu Dong Li |
Raceway Definition Using Digital Image Processing Technology in Blast Furnace Model / Ye Sun; Ren Chen; Guo Xi Wu; Li Na Sun; Li Hao Han |
Application of Data Mining in Continual Quality Improvement |
Application of Wireless Location Technology in Advertising / Zheng Fang; Yang Yang; Yan Dong Ren; Jing Cai |
The Accuracy Assessment of Weapon System Using Grey Linear Regression Method / Dai Yu Zhang; Bao Wei Song; Zhou Quan Zhu |
A Novel Video Stream Transmission Control Algorithm / Ming Wei Wang; Jian Zhong Lin; Xin Xie; Qi Wang |
Mobile Agent Technology in Chinese High Tech Virtual Enterprise Research Summarization / Bo Sun; Min Huang |
Exploration of Parameter Factor in the RSSI Model / Zhi Chao Cao; De Wei Li |
The Impact of Design Factors in Mobile Application Stores on Social Presence / Lu Fang Zhang; Ling Ling Gao; Jin Song Zhang |
Study of Zhongguancun Intersection Based on Computation Simulation and Analysis / Xiao Qing Sui; Yin Zhu |
Arid Environmental Characters Based on Eco-Information Transfer / Rang Hui Wang |
E-Mail Classification Based Learning Algorithm Using Support Vector Machine / Mu Hee Song |
Automatic Automotive Panel Drawing Direction Algorithm Based on Genetic Algorithm / Yong Ming Kang; Xing Wang; Rui Jun Liu; Yan Guo Wang |
Design of RFID Reader Based on Protocol of ISO/IEC 14443 TYPE A / Lu Wang; Wu Song Wen |
Entropy Based Attribute Reduction Algorithms for Rough Sets / Hua Yan |
Random Number Generation with Entropy Sources in the Graphics Processing Units / Yong Jin Yeom |
Research on Software Trusted Dynamic Measurement / Rui Hao; Xin Guang Peng; Lei Xiu |
Robust Software Watermarking for Protecting Three Dimension Applications Developed Using jMonkey Engine / Dong Lai Fu |
Software Reliability Assessment Based on Fuzzy Evaluation / Li Xin Liu; Qiu Ying Li |
Study on Forest Growth Predicting by Using MODIS-NDVI Time Series / Yan Sun; Qiu Wen Zhang; Wei Liao |
A Local Radial Point Interpolation Method for Two-Dimensional Schrödinger Equation / Wei Gang Zhai; Xing Hui Cai; Jiang Ren Lu; Xin Li Sun |
Mine Water Irruption Flooding Spread Route Generation Algorithm Based on Directed Graph / Hui Fu; Shan Jun Mao; Yun Xiu Luo |
Information Service System of Manufacturing Industry: Current Situation, Problem and Future Trend / Yu Cui; Xin Quan Ge; Jian Zhang; Hao Jiao |
Analysis and Design of Monitoring System in Coal Mine Based on Internet of Things / Yan Jun Qi; Wen Li Ji; Qiang Li |
EIT Image Processing Based on 2-D Empirical Mode Decomposition / Qing He; Xiao Yan Chen |
An Adjustable Topology Control Algorithm for Three-Dimensional Wireless Sensor Networks / Yan Chen; Wen Kang Wu; Liang Li |
A Novel Vision Based Inspector with Light / Huan Jun Liu |
Data Processing Method for High-Speed Signal Acquisition Mode / Jia Qiang Su; Hong Qun Tang; Bin Tang; Hao Wang; Jian Lin Liang |
Design and Implementation of Campus 3D Virtual Walkthrough System - Take Hunan Science and Technology University as an Example / San Ao Xia |
Study on the Miniature Picking Device for Hickory Nuts / Xiao Feng Xu; Wei Zhang; Jiu Hua Xu; Jue Wang |
Research on the Extended Product Design Knowledge Classification System within a Distributed Knowledge Resources Environment / Xue Fen Ma; Xu Dong Dai |
Supporting Research of Product Innovative Design Knowledge for Novices / Jiao Qi Shen; Cheng Yang; Xiao Ke Zhao |
Platform Configuration Method of the Wheel Loader Products Based on the Customers' Demands / Yan Hui Chen; Yi Hua Hu |
Home Leisure Seat Design Based on Leisure Behavior / Lu Fang Zhang; Chen Xi Fan |
Analyzing Usability of Cookers Interface Based on the User Mental Model / Lu Fang Zhang; Kai Xu; Jin Song Zhang |
Study on Nature-Oriented Furniture Design / Zhong Feng Zhang; Kai Huang; Xiao Su |
Development History, Status and Trends of Plot Seeder / Shu Guang Liu; Yun Fei Ma |
Redesign of Liangzhu Pottery Based on Form Style Recognition / Shang Shang Zhu; Shao Hong Li |
A Brazilian Ergonomic Human-Robot Interface Case / Nelson Tavares Matias; Victor Orlando Gamarra Rosado; José Glenio Medeiros de Barros; Antonio Henriques de Araújo; Rosinei Batista Ribeiro |
Wheelchair Comfort Evaluation Method Based on Neural Network / Yan Li Yuan; Tian Min Guan; Mei Chao Qin |
Evaluation of Liangzhu Cultural Artifacts Based on Perceptual Image / Shang Shang Zhu; Ye Nan Dong |
The Strategy Research of the Technology Innovation and Consumption of the Experience under the Electronic-Economic Business Affairs - Enlightenment of the Development of Fuji and Kodak / Hui He |
Exploration and Practice of Engineering Mechanics Three-Dimensional Teaching Mode Based on the Training of Innovative Talent / Yan Xia Wang |
The Research of the Training Model of Engineering Application Talents / Da Qi Xu; Shu Kai Cai |
The Construction and Innovation of Harmonious Culture for College Dormitory / Xin Qiao Xiao |
Quality Information Management of Inventory Assets Based on Equipment Defect Archives / Pin Duan; Lei Pang; Yong Jin; Qi Guo |
The Ideal of the Public Management Majors Setting up the National Affairs Management Course in Colleges and Universities / Xu Zheng |
Neuro-Industrial Engineering: Research and Practice / Xiao Hong Zhou; Liang Wang; Yi Cheng Hu |
A Study on Benign Construction of PETOE through Joint Training Model of University-Enterprise Cooperation / Yu Zhe Shen; Cheng Jun Wang; Rui Zhang |
Elementary Analysis on Construction of Assessment Index System of Cleaner Production of Cheese Dyeing Enterprises / Zheng Li; Ding Gui Luo |
Tobacco Industry Collaborating Supply Chain Research and Strategy / Zhi Hua Zhang; Shou Wen Ji; Zhao Zhao Yu; Ying Tian; Yang Hua Gao |
Study of Influences on Interest Rate Changes between 2007 and 2011 to Real Estate Development Investment in Henan Province / Ting Ting Gao; Gang Zhu Sun |
Construction of Patent Infringement Litigation Early Warning Index System for the Pharmaceutical Enterprises / Ying Wang |
Survey on Technology of the Smart Grid / You Jie Ma; Da Long Deng; Xue Song Zhou |
Research on Maintenance Force Location Model / Chang Zheng Qu; Hong Qiang Gu; Lu Gao |
Research on the External Characteristics & Binding Mechanism of the Environment Project / Ping Tao; Jie Qiong Hu |
The Study of MTA Production Model and Production Processes / Xin Wei Xu; Le Fang; Xian Li Zhu |
An Optimization Discusses of College Teaching Material Inventory Based on Supply Chain Management / Guo Jian Peng; Guo Min Chen; Gang Chen; Ze Hua Liu |
Study of the Initial Well Production Line of Adjusted Wells in X Oilfield / Zhang Yuan; Hong Fu Fan; Hong Xia Liu; Shuo Liang Wang |
Research on the Evaluation Index System of Technological Innovation Capability in Cement Industry / Da Qi Xu; Tian Hai Hua |
A Methodology for Evaluation of Distribution System Anti-Disaster Ability in Inclement Weather / Dong Fei Zhang; Rui Ma; Chen Jun Yang; Gang Wu; Hai Wei Lu |
The Contribution Analysis of Science and Technology Service Industry of Shenyang to Manufacturing Industry - Based on Clustering Analysis on Direct Consumption Coefficient / Qi Lu; Zhan Zhang; Jun Peng Liu |
Countermeasure Research about Cost Control of Automatic Lathe Tool Changing System / Li Jun Li; Wei Sun; Shao Xiong Huang; Yu Jiang; Wei Tao Bai |
Statistical Analysis of the Failure Modes and Causes of the Failure Blades of the Aviation Engine / Nan Nan Ma |