close
1.

図書
図書
1. MSA-mechanical signature analysis : presented at the Ninth Biennial Conference on Mechanical Vibration and Noise of the Design and Production Engineering Technical Conferences, Dearborn, Michigan, September 11-14, 1983
sponsored by the Design Engineering Division, ASME ; edited by Simon Braun
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1983  v, 88 p. ; 28 cm
所蔵情報: loading…
2.

図書
図書
2. Reliability, stress analysis, and failure prevention aspects of adhesive and bolted joints, rubber components, composite springs : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  v, 159 p. ; 28 cm
シリーズ名: DE ; vol. 100
所蔵情報: loading…
目次情報: 続きを見る
Non-Linear Finite Element Analysis Support Testing for Gaskets and Seals / Abraham Pannikottu ; Joseph A. Seiler ; Jerry J. Leyden
Performance Prediction of Elastomeric Gasket Materials by Compression Stress Relaxation / Robert Samples ; Stanley J. Sadon
A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections / Erol Sancaktar ; Kiran Narayan
Free Vibration Behavior of Unidirectional Composite Cylindrical Helical Springs With Circular Section / Vebil Yildirim
Free Vibration of Symmetric Cross-Ply Laminated Cylindrical Helical Springs / Erhan Kiral
Stress Analysis and Strength of Bonded Shrink Fitted Joint of Hollow Shafts Subjected to Torsional Load: The Effect of Bonded Shrink Fitted Position / Masahiro Yoneno ; Toshiyuki Sawa ; Takeshi Nakamura
Stress Analysis and Strength Evaluation of Single-Lap Band Adhesive Joints Subjected to External Bending Moments / Jiemin Liu
Elastoplastic FEM Stress Analysis and Strength Evaluation of Adhesive Tapered Lap Joints of Hollow Shafts Subjected to Tensile Loads / Masataka Kawawaki ; Yuichi Nakano
The Damping Characteristics of Machine Structures Assembled by Bonding: A Beam in Which Two Steel Strips Are Partially Joined by an Adhesive / Takashi Kobayashi
A Study on the Effects of Surface Roughness on the Strength of Single Lap Joints / Rajesh Gomatam
Stress Analysis of Bolted Circular Flanged Joints With Tap Bolts / Tsuneshi Morohoshi
Stress Analysis of Bolted Joints With Plain Washers / Hajime Yasui
Effect of Interface Configuration on the Mechanical Behaviors of Bolted Joints / Atsushi Kudo
Mechanical Behavior of Bolted Joints Under Thermal Changes / Akira Muramatsu ; Hiroyuki Kumano
Proper Selection of Auxiliary Heat Source for Reducing Thermal Residual Stresses During Welding Process / Raghu Ram Kunde ; Padmalakshmi V. Kuppa ; Shahriar Jahanian
Author Index
Non-Linear Finite Element Analysis Support Testing for Gaskets and Seals / Abraham Pannikottu ; Joseph A. Seiler ; Jerry J. Leyden
Performance Prediction of Elastomeric Gasket Materials by Compression Stress Relaxation / Robert Samples ; Stanley J. Sadon
A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections / Erol Sancaktar ; Kiran Narayan
3.

図書
図書
3. Applications of design for manufacturing : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME, the Manufacturing Engineering Division, ASME ; edited by Samir B. Billatos, Byoung Sung Kim
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  v, 93 p. ; 28 cm
シリーズ名: DE ; vol. 99
MED ; vol. 7
所蔵情報: loading…
目次情報: 続きを見る
Designing Machine Tools to Minimize Life Cycle Cost / Michael F. Carter
An Attachment Level Design Process for Snap-Fit Applications / Paul R. Bonenberger
Inputs for Successful Target Costing / Brad Clifton ; Wes Townsend
Design for Quality Approach to Improve Surface Roughness in Milling Operations / G. Abdou ; N. A. Basaly
Process Improvement Using Assembly Analysis Method / Devdas Shetty ; Claudio Campana ; Jun Kondo
Process Quality in Rapid Manufacturing / Franz-Josef Kahlen ; Aravinda Kar
Design of Experiments Procedure to Optimize Feedrate in Wire Electrical Discharge Machining / Samir B. Billatos ; Gregory M. Ricci
Design Optimization of Rolling Element Bearings / Wen Fu ; John H. Rhodes ; Bruce R. Good ; Jian (John) Dong
Design of a Computer-Aided Modeling System: A Case Study / John Lotko III ; Zbigniew M. Bzymek ; Richard E. Garrett
Author Index
Designing Machine Tools to Minimize Life Cycle Cost / Michael F. Carter
An Attachment Level Design Process for Snap-Fit Applications / Paul R. Bonenberger
Inputs for Successful Target Costing / Brad Clifton ; Wes Townsend
4.

図書
図書
4. Vibration and noise control : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME, the Dynamic Systems and Control Division, ASME ; edited by H.S. Tzou, Reza Kashani, William W. Clark
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  vi, 209 p. ; 28 cm
シリーズ名: DE ; vol. 97
DSC ; vol. 65
所蔵情報: loading…
5.

図書
図書
5. Dynamics, acoustics, and simulations : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME ; edited by Ray P.S. Han, K.H. Lee, Alberto C.J. Luo, editors
出版情報: New York : American Society of Mechanical Engineers, c1998  vi, 269 p. ; 28 cm
シリーズ名: DE ; vol. 98
所蔵情報: loading…
6.

図書
図書
6. Active/passive vibration control and nonlinear dynamics of structures : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas
sponsored by the Design Engineering Division, ASME, the Applied Mechanics Division, ASME ; edited by W.W. Clark ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 218 p. ; 28 cm
シリーズ名: DE ; vol. 95
AMD ; vol. 223
所蔵情報: loading…
目次情報:
Vibration control via active/passive damping methods
Nonlinear dynamics and stochastic mechanics
Vibration control via active/passive damping methods
Nonlinear dynamics and stochastic mechanics
7.

図書
図書
7. Concurrent product design and environmentally conscious manufacturing : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas
sponsored by the Design Engineering Division, ASME, the Manufacturing Engineering Division, ASME ; edited by Samir B. Billatos, Hong C. Zhang
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 295 p. ; 26 cm
シリーズ名: DE ; vol. 94
MED ; vol. 5
所蔵情報: loading…
8.

図書
図書
8. Reliability, stress analysis, and failure prevention issues in adhesively bonded and bolted joints, composites design : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  v, 131 p. ; 28 cm
シリーズ名: DE ; vol. 96
所蔵情報: loading…
9.

図書
図書
9. Proceedings of the 7th International Power Transmission and Gearing Conference : presented at the 7th International Power Transmission and Gearing Conference, October 6-9, 1996, San Diego, California
sponsored by the Design Engineering Division, ASME ; edited by Albert Karvelis
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  x, 828 p. ; 28 cm
シリーズ名: DE ; vol. 88
所蔵情報: loading…
10.

図書
図書
10. Design for manufacturing and assembly : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia
sponsored by the Design Engineering Division, ASME ; edited by Samir B. Billatos, Nadia A. Basaly
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 91 p. ; 26 cm
シリーズ名: DE ; v. 89
所蔵情報: loading…
11.

図書
図書
11. Elasto-impact and friction in dynamic systems : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia
sponsored by the Design Engineering Division, ASME ; edited by George T. Flowers, Subhash C. Sinha, Aldo A. Ferri
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 127 p. ; 28 cm
シリーズ名: DE ; v. 90
所蔵情報: loading…
12.

図書
図書
12. Reliability, stress analysis, and failure prevention issues in emerging technologies and materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York : American Society of Mechanical Engineers, c1995  v, 117 p. ; 28 cm
シリーズ名: DE ; vol. 87
所蔵情報: loading…
13.

図書
図書
13. Nonlinear dynamics and controls : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia
sponsored by the Design Engineering Division, ASME, the Applied Mechanics Division, ASME, the Dynamic Systems and Controls Division, ASME ; edited by Anil K. Bajaj, N. Sri Namachchivya, Matthew, A. Franchek
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 239 p. ; 28 cm
シリーズ名: DE ; v. 91
所蔵情報: loading…
14.

図書
図書
14. Reliability, stress analysis, and failure prevention issues in fastening and joining, composite and smart structures, numerical and fea methods, and risk minimization : presented at the 1996 International Mechanical Engineering Congress and Exposition, November 17-22, 1996 Atlanta, Georgia
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar, Shahriar Jahanian
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 133 p. ; 28 cm
シリーズ名: DE ; v. 92
所蔵情報: loading…
15.

図書
図書
15. Active control of vibration and noise : presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 1996, Atlanta, Georgia
sponsored by the Design Engineering Division, ASME ...[et al.] ; edited by C.A.Tan ...[et al.]
出版情報: New York : American Society of Mechanical Engineers, c1996  vii, 415 p. ; 28 cm
シリーズ名: DE ; Vol.93
所蔵情報: loading…
16.

図書
図書
16. Vibrations of bladed disk assemblies : presented at the Ninth Biennial Conference on Mechanical Vibration and Noise of the Design and Production Engineering Technical Conferences, Dearborn, Michigan, September 11-14, 1983
sponsored by the Design Engineering Division, ASME ; edited by D.J. Ewins, A.V. Srinivasan
出版情報: New York : American Society of Mechanical Engineers, c1983  v, 160 p. ; 28 cm
所蔵情報: loading…
17.

図書
図書
17. Advances in design automation --1995-- : presented at the 1995 ASME Design Engineering Technical Conferences - 21st Annual Design Automation Conference, September 17-20, 1995, Boston, Massachusetts
sponsored by the Design Engineering Division, ASME ; edited by Shapour Azarm ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  xii, 995 p. ; 28 cm
シリーズ名: DE ; v. 82 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 1
所蔵情報: loading…
18.

図書
図書
18. Presented at the 1995 ASME Design Engineering Technical Conferences - the 11th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention, the 9th International Conference on Design Theory and Methodology, the JSME Symposium on Design and Production, Mechanical Design Education and History, the Computer Integrated Concurrent Design Conference, September 17-20, 1995, Boston, Massachusetts
compiled by Daniel J. Inman ; sponsored by the Design Engineering Division, ASME ; edited by Osama M. Jadaan ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  x, 1031 p. ; 28 cm
シリーズ名: DE ; v. 83 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 2
所蔵情報: loading…
19.

図書
図書
19. Vibration of nonlinear, random, and time-varying systems : presented at the ASME Design Engineering Technical Conference -- the 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, 1995, Boston, Massachusetts
sponsored by the Design Engineering Division, ASME ; compiled by H.H. Cudney ; edited by S.C. Sinha ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  xiii, 1421 p. ; 28 cm
シリーズ名: DE ; v. 84-1 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 3, pt. A
所蔵情報: loading…
20.

図書
図書
20. Acoustics, vibrations, and rotating machines : presented at the ASME Design Engineering Technical Conference -- the 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, 1995, Boston, Massachusetts
sponsored by the Design Engineering Division, ASME ; compiled by H.H. Cudney ; edited by Raymond P. Daddazio ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  xiii, 1493 p. ; 28 cm
シリーズ名: DE ; v. 84-2 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 3, pt. B
所蔵情報: loading…
21.

図書
図書
21. Vibration control, analysis, and identification : presented at the ASME Design Engineering Technical Conference -- the 15th Biennial Conference on Mechanical Vibration and Noise, September 17-20, 1995, Boston, Massachusetts
sponsored by the Design Engineering Division, ASME ; compiled by H.H. Cudney ; edited by K.-W. Wang ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  xv, 1500 p. ; 28 cm
シリーズ名: DE ; v. 84-3 . Proceedings of the 1995 Design Engineering Technical Conferences ; v. 3, pt. C
所蔵情報: loading…
22.

図書
図書
22. Design for manufacturability 1995 : current engineering and design/manufacturing integration : presented at the 1995 National Design Engineering Show and Conference March 13-17, 1995, Chicago, Illinois
sponsored by the Design Engineering Division, ASME ; edited by J. Richard Behun
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 119 p. ; 28 cm
シリーズ名: DE ; v. 81
所蔵情報: loading…
23.

図書
図書
23. Design theory and methodology -DTM '94- : quality and tolerancing, house of quality, robust and axiomatic design, paradoxes in design, abstractions and designers, verification, support and diagnostics, complexity and collaborative design, history and case-based design, paradigms for design education, design methods : presented at the 1994 ASME Design Technical Conferences - 6th International Conference on Design Theory and Methodology, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by T.K. Hight, F. Mistree
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  vii, 383 p. ; 28 cm
シリーズ名: DE ; vol. 68
所蔵情報: loading…
24.

図書
図書
24. Trends in vehicle design research - 1987 : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987
sponsored by the Design Engineering Division, ASME ; edited by S.A. Velinsky
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1987  v, 96 p. ; 28 cm
シリーズ名: DE ; vol. 11
所蔵情報: loading…
25.

図書
図書
25. Biomechanics in sport - a 1987 update : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987
sponsored by the Design Engineering Division, ASME, the Bioengineering Division, ASME ; edited by E.D. Rekow ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1987  v, 127 p. ; 28 cm
シリーズ名: DE ; vol. 13
BED ; vol. 6
所蔵情報: loading…
26.

図書
図書
26. Medical devices and sporting equipment : presented at the Design Automation Conference, Columbus, Ohio, October 5-8, 1986
sponsored by the Design Engineering Division, ASME ; edited by E.D. Rekow
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1986  v, 81 ; 28 cm
シリーズ名: DE ; vol. 1
所蔵情報: loading…
27.

図書
図書
27. Advanced automotive technologies, 1991 : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991
sponsored by the Design Engineering Division ... [et al.] ; edited by Steven A. Velinsky ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vii, 551 p. ; 26 cm
シリーズ名: DE ; vol. 40
所蔵情報: loading…
28.

図書
図書
28. Issues in design/manufacture integration, 1991 : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Atlanta, Georgia, December 1-6, 1991
sponsored by the Design Engineering Division ; edited by A. Sharon ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  v, 81 p. ; 28 cm
シリーズ名: DE ; vol. 39
所蔵情報: loading…
29.

図書
図書
29. Methods for predicting material life in fatigue : presented at the winter annual meeting of the American Society of Mechanical Engineers, New York, New York, December 2-7, 1979
sponsored by the Materials Division, ASME, the Pressure Vessels and Piping Division, ASME, the Design Engineering Division, ASME ; edited by W.J. Ostergren, J.R. Whitehead
出版情報: New York : The Society, c1979  v, 298 p. ; 26 cm
所蔵情報: loading…
30.

図書
図書
30. Reliability, stress analysis, and failure prevention : presented at the 1991 ASME design technical conferences, 9th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention, September 22-25, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by Thomas H. Service
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vi, 185 p. ; 28 cm
シリーズ名: DE ; vol. 30
所蔵情報: loading…
31.

図書
図書
31. Design theory and methodology - DTM '91 - : presented at the 1991 ASME design technical conferences, 3rd International Conference on Design Theory and Methodology, September 22-25, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by Larry A. Stauffer
出版情報: New York : American Society of Mechanical Engineers, c1991  vi, 295 p. ; 28 cm
シリーズ名: DE ; vol. 31
所蔵情報: loading…
32.

図書
図書
32. Advances in design automation, 1991 : presented at the 1991 ASME Design Technical Conferences--17th Design Automation Conference, September 22-25, 1991, Miami, Florida (v. 1 ; v. 2)
sponsored by the Design Engineering Division, ASME ; edited by Gary A. Gabriele
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  2 v. ; 28 cm
シリーズ名: DE ; vol. 32
所蔵情報: loading…
33.

図書
図書
33. Flexible assembly systems, 1991 : presented at the 1991 ASME Design Technical Conferences-3rd ASME Conference on Flexible Assembly Systems, September 22-25, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by A.H. Soni
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  v, 107 p. ; 28 cm
シリーズ名: DE ; vol. 33
所蔵情報: loading…
34.

図書
図書
34. Structural vibration and acoustics : presented at the 1991 ASME Design Techncial Conferences, 13th Biennial Conference on Mechanical Vibration and Noise, September 22-25, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by T.C. Huang ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vii, 337 p. ; 28 cm
シリーズ名: DE ; vol. 34
所蔵情報: loading…
35.

図書
図書
35. Rotating machinery and vehicle dynamics : presented at the 1991 ASME Design Technical Conferences - 13th Biennial Conference on Mechanical Vibration and Noise, September 22-23, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by T.C. Huang ... [et al.]
出版情報: New York, NY : American Society of Mechanical Engineers, c1991  vii, 357 p. ; 28 cm
シリーズ名: DE ; vol. 35
所蔵情報: loading…
36.

図書
図書
36. Machinery dynamics and element vibrations : presented at the 1991 ASME Design Technical Conferences - 13th Biennial Conference on Mechanical Vibration and Noise, September 22-25, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by T.C. Huang ... [et al.]
出版情報: New York, NY : American Society of Mechanical Engineers, c1991  vii, 323 p. ; 28 cm
シリーズ名: DE ; vol. 36
所蔵情報: loading…
37.

図書
図書
37. Vibration analysis : analytical and computational : presented at the 1991 ASME Design Technical Conferences - 13th Biennial Conference on Mechanical Vibration and Noise, September 22-25, 1991, Miami, Florida
sponsored by the Design Engineering Division, ASME ; edited by T.C. Huang ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1991  vii, 307 p. ; 28 cm
シリーズ名: DE ; vol. 37
所蔵情報: loading…
38.

図書
図書
38. Modal analysis, modeling, diagnostics, and control : analytical and experimental : presented at the 1991 ASME Design Technical Conferences-13th Biennial Conference on Mechanical Vibration and Noise, September 22-25, 1991
sponsored by the Design Engineering Division, ASME ; edited by T.C. Huang ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vii, 327 p. ; 28 cm
シリーズ名: DE ; vol. 38
所蔵情報: loading…
39.

図書
図書
39. Flexible assembly systems--1990 : presented at the 1990 ASME design technical conferences, 2nd Conference in Flexible Assembly Systems, Chicago, Illinois, September 16-19, 1990
sponsored by the Design Technical Committee of the Design Engineering Division, ASME ; edited by A.H. Soni
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1990  vi, 228 p. ; 28 cm
シリーズ名: DE ; vol. 28
所蔵情報: loading…
40.

図書
図書
40. Design theory and methodology, DTM '90 : presented at the 1990 ASME Design Technical Conferences, 2nd International Conference on Design Theory and Methodology, Chicago, Illinois, September 16-19, 1990
sponsored by the Design Engineering Division, ASME ; edited by J. Rinderle
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1990  vii, 361 p. ; 28 cm
シリーズ名: DE ; vol. 27
所蔵情報: loading…
41.

図書
図書
41. Proceedings of the 1989 International Power Transmission and Gearing Conference : new technologies for power transmissions of the 90's, held in Chicago, Illinois, April 25-28, 1989 (v. 1 ; v. 2)
sponsored by the Design Engineering Division, ASME
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1989  2 v. (xi, 905 p.) ; 28 cm
所蔵情報: loading…
42.

図書
図書
42. Advanced automotive technologies 1993 : presented at the 1993 ASME Winter Annual Meeting, New Orleans, Louisiana, November 28-December 3, 1993
sponsored by the Dynamic Systems and Control Division, the Design Engineering Division and the Applied Mechanics Division, ASME ; edited by M. Ahmadian
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 419 p. ; ill. ; 28 cm
シリーズ名: DSC ; vol. 52
所蔵情報: loading…
43.

図書
図書
43. Advances in design automation -1993- : presented at the 1993 ASME design technical conferences, 19th Design Automation Conference, Albuquerque, New Mexico, September 19-22, 1993 (vol. 65-1 ; vol. 65-2)
sponsored by the Design Engineering Division, ASME ; edited by B.J. Gilmore ... [et al.]
出版情報: New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, c1993  2 v. ; 28 cm
シリーズ名: DE ; vol. 65
所蔵情報: loading…
44.

図書
図書
44. Vibration, shock, damage, and identification of mechanical systems : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by D. Carne ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 115 p. ; 29 cm
シリーズ名: DE ; v. 64
所蔵情報: loading…
45.

図書
図書
45. Vibrations of mechanical systems and the history of mechanical design : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by R. Echempati ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 149 p. ; 29 cm
シリーズ名: DE ; v. 63
所蔵情報: loading…
46.

図書
図書
46. Vibration isolation, acoustics, and damping in mechanical systems : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by C. Johnson, S.H. Sung
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 117 p. ; 29 cm
シリーズ名: DE ; v. 62
所蔵情報: loading…
47.

図書
図書
47. Vibration and control of mechanical systems : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by C.A. Tan, L.A. Bergman
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 275 p. ; 29 cm
シリーズ名: DE ; v. 61
所蔵情報: loading…
48.

図書
図書
48. Vibration of rotating systems : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by K.W. Wang, D. Segalman
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 382 p. ; 29 cm
シリーズ名: DE ; v. 60
所蔵情報: loading…
49.

図書
図書
49. Structural dynamics of large scale and complex systems : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by C. Pierre, N.C. Perkins
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 153 p. ; 29 cm
シリーズ名: DE ; v. 59
所蔵情報: loading…
50.

図書
図書
50. Intelligent structures, materials, and vibrations : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by M. Shahinpoor, H.S. Tzou
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 83 p. ; 29 cm
シリーズ名: DE ; v. 58
所蔵情報: loading…
51.

図書
図書
51. Vibrations and dynamics of robotic and multibody structures : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by M. Shahinpoor, R. Ryan
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 123 p. ; 29 cm
シリーズ名: DE ; v. 57
所蔵情報: loading…
52.

図書
図書
52. Dynamics and vibration of time-varying systems and structures : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by S.C. Sinha, R.M. Evan-Iwanowski
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vii, 475 p. ; 29 cm
シリーズ名: DE ; v. 56
所蔵情報: loading…
53.

図書
図書
53. Reliability, stress analysis, and failure prevention -1993- : presented at the 1993 ASME design technical conferences, 10th Biennial Conference on Reliability, Stress Analysis, and Failure Prevention, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by R. J. Schaller
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 331 p. ; 29 cm
シリーズ名: DE ; v. 55
所蔵情報: loading…
54.

図書
図書
54. Nonlinear vibrations : presented at the 1993 ASME design technical conferences, 14th Biennial Conference on Mechanical Vibration and Noise, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by R.A. Ibrahim ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 287 p. ; 29 cm
シリーズ名: DE ; v. 54
所蔵情報: loading…
55.

図書
図書
55. Design theory and methodology -DTM '93- : presented at the 1993 ASME design technical conferences, 5th International Conference on Design Theory and Methodology, Albuquerque, New Mexico, September 19-22, 1993
sponsored by the Design Engineering Division, ASME ; edited by T.K. Hight, L.A. Stauffer
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 259 p. ; 29 cm
シリーズ名: DE ; v. 53
所蔵情報: loading…
56.

図書
図書
56. Dynamic mechanical systems, geometric modeling and features, concurrent engineering : presented at the 1994 ASME Design Technical Conferences - 20th Design Automation Conference, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by B.J. Gilmore ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  viii, 640 p. ; 28 cm
シリーズ名: DE ; vol. 69-1 . Advances in Design Automation 1994. vol. 1
所蔵情報: loading…
57.

図書
図書
57. Robust design applications, decomposition and design optimization, optimization tools and applications : presented at the 1994 ASME Design Technical Conferences - 20th Design Automation Conference, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by B.J. Gilmore ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  viii, 580 p. ; 28 cm
シリーズ名: DE ; vol. 69-2 . Advances in Design Automation 1994. vol. 2
所蔵情報: loading…
58.

図書
図書
58. Mechanism synthesis and analysis : presented at the 1994 ASME Design Technical Conferences - 23rd Biennial Mechanisms Conference, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by G.R. Pennock ; associate editors, J. Angeles ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  viii, 542 p. ; 28 cm
シリーズ名: DE ; vol. 70
所蔵情報: loading…
59.

図書
図書
59. Machine elements and machine dynamics : presented at the 1994 ASME Design Technical Conferences - 23rd Biennial Mechanisms Conference, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by G.R. Pennock ; associate editors, J. Angeles ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  viii, 548 p. ; 28 cm
シリーズ名: DE ; vol. 71
所蔵情報: loading…
60.

図書
図書
60. Robotics : kinematics, dynamics and controls : presented at the 1994 ASME Design Technical Conferences - 23rd Biennial Mechanisms Conference, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by G.R. Pennock ; associate editors, J. Angeles ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  viii, 510 p. ; 28 cm
シリーズ名: DE ; vol. 72
所蔵情報: loading…
61.

図書
図書
61. Flexible assembly systems 1994 : presented at the 1994 ASME Design Technical Conferences - 4th ASME Flexible Assembly Conference, Minneapolis, Minnesota, September 11-14, 1994
sponsored by the Design Engineering Division, ASME ; edited by A.H. Soni
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  v, 179 p. ; 28 cm
シリーズ名: DE ; vol. 73
所蔵情報: loading…
62.

図書
図書
62. Design for manufacturability 1994 : an environment for improving design and designing to improve our environment : presented at the 1994 Design for Manufacturability Conference at the 1994 National Design Engineering Conference, Chicago, Illinois, March 14-17, 1994
sponsored by the Design Engineering Division, ASME ; edited by J. Mason
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1994  v, 125 p. ; 28 cm
シリーズ名: DE ; vol. 67
所蔵情報: loading…
63.

図書
図書
63. 1987 advances in bioengineering : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Boston, Massachusetts, December 13-18, 1987
sponsored by the Bioengineering Division, ASME, the Design Engineering Division, ASME ; edited by A.G. Erdman
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1987  xiii, 170 p. ; 28 cm
シリーズ名: BED ; vol. 3
DE ; vol. 12
所蔵情報: loading…
64.

図書
図書
64. Transportation systems -1992- : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992
sponsored by the Dynamic Systems and Control Division, the Applied Mechanics Division, and the Design Division, ASME ; edited by Giorgio Rizzoni ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  vi, 454 p. ; 28 cm
シリーズ名: DSC ; vol. 44
所蔵情報: loading…
65.

図書
図書
65. Flexible assembly systems, 1992 : presented at the 1992 ASME Design Technical Conferences-4th Conference on Flexible Assembly Systems, Scottsdale, Arizona, September 13-16, 1992
sponsored by the Design Engineering Division, ASME ; edited by A.H. Soni
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  v, 139 p. ; 28 cm
シリーズ名: DE ; vol. 48
所蔵情報: loading…
66.

図書
図書
66. Active control of noise and vibration, 1992 : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992
sponsored by the Dynamic Systems and Control Division, the Design Engineering Division, and the Noise Control and Acoustics Division, ASME ; edited by Clark J. Radcliffe ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  vi, 363 p. ; 28 cm
シリーズ名: DSC ; vol. 38
所蔵情報: loading…
67.

図書
図書
67. Mechanisms design and synthesis : presented at the 1992 ASME design technical conferences, 22nd Biennal Mechanisms Conference, Scottsdale, Arizona, September 13-16, 1992
sponsored by the Design Engineering Division, ASME ; edited by G. Kinzel ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1992  ix, 672 p. ; 28 cm
シリーズ名: DE ; vol. 46
所蔵情報: loading…
68.

図書
図書
68. Flexible mechanisms, dynamics, and analysis : presented at the 1992 ASME design technical conferences, 22nd Biennal Mechanisms Conference, Scottsdale, Arizona, September 13-16, 1992
sponsored by the Design Engineering Division, ASME ; edited by G. Kinzel ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1992  ix, 662 p. ; 28 cm
シリーズ名: DE ; vol. 47
所蔵情報: loading…
69.

図書
図書
69. Robotics, spatial mechanisms, and mechanical systems : presented at the 1992 ASME design technical conferences, 22nd Biennal Mechanisms Conference, Scottsdale, Arizona, September 13-16, 1992
sponsored by the Design Engineering Division, ASME ; edited by G. Kinzel ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1992  viii, 644 p. ; 28 cm
シリーズ名: DE ; vol. 45
所蔵情報: loading…
70.

図書
図書
70. Design for manufacturing : life cycle costs while improving time to market and product quality : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992
sponsored by The Design Engineering Division, ASME ; edited by Alice M. Agogino
出版情報: New York : The Society, c1992  v, 65 p. ; 28 cm
シリーズ名: DE ; vol. 51
所蔵情報: loading…
71.

図書
図書
71. Design for Manufacturability 1993 : integrating manufacturing and design to create a concurrent engineering environment : presented at the National Design Engineering Conference, Chicago, Illinois, March 9-10, 1993
sponsored by the Design Engineering Division, ASME ; edited by Ph. J. Guichelaar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 163 p. ; 28 cm
シリーズ名: DE ; vol. 52
所蔵情報: loading…
72.

図書
図書
72. Materials for noise and vibration control : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Noise Control and Acoustics Division, the Design Engineering Division, and the Applied Mechanics Division, ASME ; edited by P.K. Raju, R.F. Gibson
出版情報: New York : American Society of Mechanical Engineers, c1994  v, 165 p. ; 28 cm
シリーズ名: NCA ; vol. 18
DE ; vol. 80
所蔵情報: loading…
73.

図書
図書
73. Transportation systems 1994 : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Dynamic Systems and Control Division and the Design Engineering Division, ASME ; edited by R. Kashani
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 387 p. ; 26 cm
シリーズ名: DSC ; vol. 54
DE ; vol. 76
所蔵情報: loading…
74.

図書
図書
74. Concurrent product design : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Design Engineering Division, ASME ; edited by R. Gadh
出版情報: New York : American Society of Mechanical Engineers, c1994  v, 197 p. ; 28 cm
シリーズ名: DE ; vol. 74
所蔵情報: loading…
75.

図書
図書
75. Active control of vibration and noise : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Design Engineering Division, the Applied Mechanics Division, the Dynamic Systems and Control Division, and the Noise Control and Acoustics Division, ASME ; edited by K.W. Wang ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vii, 538 p. ; 28 cm
シリーズ名: DE ; vol. 75
所蔵情報: loading…
76.

図書
図書
76. Stochastic dynamics and reliability of nonlinear ocean systems : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Design Engineering Division, ASME ; edited by R.A. Ibrahim, Y.K. Lin
出版情報: New York : American Society of Mechanical Engineers, c1994  v, 119 p. ; 28 cm
シリーズ名: DE ; vol. 77
所蔵情報: loading…
77.

図書
図書
77. Reliability, stress analysis, and failure prevention aspects of composite and active materilas : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Design Engineering Division, ASME ; edited by E. Sancaktar, J.S. Lee
出版情報: New York : American Society of Mechanical Engineers, c1994  v, 133 p. ; 28 cm
シリーズ名: DE ; vol. 79
所蔵情報: loading…
78.

図書
図書
78. Nonlinear and stochastic dynamics : presented at 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994
sponsored by the Applied Mechanics Division and the Design Engineering Division, ASME ; edited by A.K. Bajaj ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 339 p. ; 28 cm
シリーズ名: AMD ; vol. 192
DE ; vol. 78
所蔵情報: loading…
79.

図書
図書
79. Designers in action, 1985-1991 : case studies in mechanical engineering design
edited by S. Frederic Guggenheim ; sponsored by the Design Engineering Division, ASME
出版情報: New York, N.Y. : ASME, c1992  vi, 205 p. ; 28 cm
シリーズ名: DE ; vol. 41
所蔵情報: loading…
80.

図書
図書
80. Design theory and methodology, DTM '92 : presented at the 1992 ASME design technical conferences--4th International Conference on Design Theory and Methodology, Scottsdale, Arizona, September 13-16, 1992
sponsored by the Design Engineering Division, ASME ; edited by D.L. Taylor, L.A. Stauffer
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  vii, 379 p. ; 28 cm
シリーズ名: DE ; vol. 42
所蔵情報: loading…
81.

図書
図書
81. Friction-induced vibration, chatter, squeal, and chaos : presented at the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992
sponsored by the Design Engineering Division, ASME ; edited by Raouf A. Ibrahim, Andres Soom
出版情報: New York, N.Y. : ASME, c1992  v, 183 p. ; 28 cm
シリーズ名: DE ; vol. 49
所蔵情報: loading…
82.

図書
図書
82. Nonlinear vibrations : presented by the Winter Annual Meeting of the American Society of Mechanical Engineers, Anaheim, California, November 8-13, 1992
sponsored by the Design Engineering Division and the Applied Mechanics Division, ASME ; edited by Raouf A. Ibrahim, N. Sri Namachchivaya, Anil K. Bajaj
出版情報: New York : American Society of Mechanical Engineers, c1992  v, 167 p. ; 28 cm
シリーズ名: DE ; v. 50
AMD ; v. 144
所蔵情報: loading…
83.

図書
図書
83. Advancing power transmission into the 21st century : proceedings of the 1992 Power Transmission and Gearing Conference : presented at the 1992 ASME Design Technical Conferences - 6th International Power Transmission and Gearing Conference, Scottsdale, Arizona, September 13-16, 1992 (v. 1 ; v. 2)
sponsored by the Design Engineering Division, ASME
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  2 v. ; 28 cm
シリーズ名: DE
所蔵情報: loading…
目次情報:
DE <> vol. 43
DE <> vol. 43
84.

図書
図書
84. Advances in design automation, 1992 : presented at the 1992 ASME Design Technical Conferences--18th Design Automation Conference, Scottsdale, Arizona, September 13-16, 1992 (v. 1 ; v. 2)
sponsored by the Design Engineering Division, ASME ; edited by David A. Hoeltzel
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  2 v. ; 28 cm
シリーズ名: DE ; vol. 44
所蔵情報: loading…
85.

図書
図書
85. Vibration and control of mechanical systems : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York
sponsored by The Design Engineering Division, ASME ; edited by H.R. Hamidzadeh, H. Rahnejat, Albert C.J. Luo
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vii, 395 p. ; 28 cm
シリーズ名: DE ; v. 111
所蔵情報: loading…
目次情報: 続きを見る
Vibration of Elastic Continuum With Stochastically Varying Surface Roughness Carrying an Accelerating Oscillator / Christian A. Schenk ; Lawrence A. Bergman
Feasibility of Using an Active Actuator for Two-Dimensional Vibration Abatement in a Turning Process / W. Y. Yan ; A. M. Al-Jumaily
The Modeling of Mechatronic Servo Systems and Vibration Control / Junzhong Zou ; Zhongliang Jing ; Masatoshi Nakamura ; Albert C. J. Luo
Modeling of Friction Induced Vibration due to Third-Body Effects / David S. Xu ; Hooshang Heshmat
Dynamic Analysis of Semi-Active Tuned Vibration Absorbers Using Closed-Form Equivalent Models / Jeong-Hoi Koo ; Mehdi Ahmadian
Model Based Control of a Smart Vibrating Cantilever Beam / Robin G. Scott ; Michael D. Brown ; Warren J. Manning ; Martin C. Levesley
A New Approach for Dynamical Stable Criterion of Hot Strip Mills / Mitsuhiro Yoshida ; Hideaki Furumoto ; Masashi Yoshikawa ; Shigeki Morii
A Systematic Approach for Machining Process Improvement / Brij B. Seth ; Youssef A. Hamidieh ; Balachandra Muniyappa
Study of Automotive Hydromotive Hydrobushing in Off-Axis Vibration / Min Lu ; Judah Ari-Gur ; John Garety
Simulation of Roll Grinding System Dynamics With Rotation Speed Control / LiHong Yuan ; Veli-Matti Jarvenpaa ; Erno Keskinen ; Michel Cotsaftis
Constrained Multi-Body Dynamic Analysis of Shaft and Bearing Systems / F. Hoffmann ; H. Rahnejat
Multi-Body Contact Dynamics Modeling of Roll Mechanisms in Paper Manufacturing Systems / Sirpa Launis ; Juha-Matti Kivinen
The Generalized Shooting Arc-Length Method for Periodic Solutions and the Corresponding Periods of Nonlinear Dynamical Systems / Dexin Li ; Jianxue Xu
Nonlinear Dynamics Analysis of a Printed Wiring Board With Simple and Clamped Boundary Conditions / Xiaoling He
Combination Resonance of a Magnet Over a High-T[subscript c] Superconductor Excited Vertically / Toshihiko Sugiura ; Masayuki Kondo
Analysis on an Oscillator With Delayed Feedback Near Double Hopf Bifurcations / P. Yu ; Y. Yuan
A Multi-Mode Approach for the Nonlinear Vibrations of Circular Cylindrical Shells / Francesco Pellicano ; Marco Amabili ; Michael P. Paidoussis
Nonlinear Vibration Periodicity Analysis of Timoshenko Beams Under Harmonic Base Excitation / Nader Jalili ; Ebrahim Esmailzadeh
Induced Vibration of Suspension Bridges Traversed by Moving Vehicles
Dynamic Interaction of a Moving Oscillator With an Elastically Supported Continuum / Yonghong Chen ; Chin An Tan
Experiments on the Active Control of Circular Disk Vibration / J. B. Qiu ; X. Q. Huang ; D. Q. Wang
In-Plane Free Vibrations of the Double-Segment Compound Rotating Disks / Hamid R. Hamidzadeh ; Reza U. Karim
Crack Influences on the Vibration, Buckling, and Parametric Instability of Plates / Abolhassan Vafai ; Mahyar Javidruzi ; Homayoon E. Estekanchi
Vibration of Free-Free Two Member Open Frames With End and Elbow Masses / G. R. Heppler ; D. C. D. Oguamanam ; J. S. Hansen
Estimation of Chaotic Parameter Regimes via Generalized Competitive Modes Approach / Weiguang Yao ; Pei Yu ; Chris Essex
On a Chaos Control for the Logistic Map / Xiaohua Wang
The Bifurcation Behaviors for a 5D Magnetic Levitation Control System / Hong Yao ; Jian-Xue Xu
Robust Stability and Dynamic Analysis of a Special Type of Floating Offshore Structure / E. Esmailzadeh ; A. Goodarzi
Nonlinear Supersonic Flutter of Imperfect Circular Cylindrical Shells / M. Amabili ; F. Pellicano
Dynamics of a Nonlinear Mechanical Resonator in Micro-Electro-Mechanical Systems / F. Y. Wang
On the Suppression of Flow-Induced Vibration With a Simple Control Algorithm / Pablo Carbonell ; Xiaodong Wang ; Zhong-Ping Jiang
The Pressure Field Around a Vibrating Cylinder in a Fluid Annulus / Robert R. Reynolds ; Jack H. Cole ; Zhen Yuan
Direct Perturbation Analysis on Transmission Lines With Detuning Pendulums / Kelin Pan
Asymmetrically Respiratory System Simulation for Identifying Airway Occlusion / Y. Al-Fakhri
Elasto-Multi-Body Dynamics of Multi-Cylinder Internal Combustion Engine / S. Gupta ; P. Kelly
Air Velocity Regulation in a Wind Tunnel / M. Ebrahimi ; R. Whalley
Vibration Analysis of Multifunctional Satellite Structure / H. Nayeb-Hashemi ; A. Vaziri
Evaluation of Bond Strength With Void Subjected to Harmonic Peeling Loads / H. R. Hamidzadeh
Enhancement for Frequency Domain Based Tool Breakage Detection System / Raghunandan Sridhara
Development of an Innovative Space Boom / Michael C. Lou ; Houfei Fang ; Ben Yang ; Nathaniel Lee Palmer
A Study on the Effect of Preview Uncertainties in Preview Control of Vehicle Suspensions / Ardalan Vahidi ; Azim Eskandarian
4WID: A New Concept in Electrical Vehicles / G. R. Vossoughi
On Axisymmetric Vibration of Annular Plate of Parabolic Thickness Variation by Factorization of Differential Equation / Dumitru I. Caruntu
Inverse Dynamics of a Planar Flexible-Link Manipulator With Revolute-Prismatic Joints / M. Farid ; I. Salimi
Simplified FEM Model of Paper Machine Roll for Multibody Rolling Contact Analyses / Erno K. Keskinen
Age Effect Investigation on Postural Dynamic Responses of Human Body / Maryam Hoviattalab
A Solution for the Interior Sound Field With a Nonuniform Temperature Distribution in the Vehicle Passenger Room / Jiuhui Wu ; Hualing Chen
Structural Sound Radiation on a Reflecting Plane by the Boundary Point Method / Z. Cui
On the Hamiltonian Formulation of Thin Free Liquid Sheets / Zhi Li
The Vibration Control of a Flexible Mechanism With Impact / Chunmei Jin ; Yang Qiu ; Ling Fan
Dynamic Analysis of a Slider-Crank Mechanism With Flexible Connecting Rod and Viscous Friction / Jinfu Zhang ; Qinyu Xu ; Ling Zhang
Author Index
Vibration of Elastic Continuum With Stochastically Varying Surface Roughness Carrying an Accelerating Oscillator / Christian A. Schenk ; Lawrence A. Bergman
Feasibility of Using an Active Actuator for Two-Dimensional Vibration Abatement in a Turning Process / W. Y. Yan ; A. M. Al-Jumaily
The Modeling of Mechatronic Servo Systems and Vibration Control / Junzhong Zou ; Zhongliang Jing ; Masatoshi Nakamura ; Albert C. J. Luo
86.

図書
図書
86. Proceedings of the ASME Design Engineering Division 2002 : presented at the 2002 ASME International Mechanical Engineering Congress and Exposition, November 17-22, 2002, New Orleans, Louisiana
sponsored by the Design Engineering Dvision, ASME
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  x, 842 p. ; 28 cm
シリーズ名: DE ; vol. 115
所蔵情報: loading…
87.

図書
図書
87. Advanced vehicle technologies 2001 : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York
sponsored by the Design Engineering Division, ASME ; edited by Brian Gilmore ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vi, 251 p. ; 28 cm
シリーズ名: DE ; vol. 112
所蔵情報: loading…
目次情報: 続きを見る
Genetic Algorithm-Based Maximum Likelihood Parameter Estimation for Transit Buses / Jie Xiao ; Bohdan T. Kulakowski
Application of Neural Network Friction Component Model in Automotive Drivetrain Simulations / M. Cao ; K. W. Wang ; Y. Fujii ; W. E. Tobler
Performance of Developed Driving Simulator With Full Vehicle Model of Multibody Dynamics / Taichi Shiiba ; Yoshihiro Suda
Dynamic Finite Element Modeling of Belt-Drives Including One-Way Clutches / Michael J. Leamy ; Tamer M. Wasfy
Computer Simulation of the Dynamic Properties of a Complex Man-Railway Vehicle-Environment System / Iwona Grabarek ; Wlodzimierz Choromanski
Simulation of Driver Behaviour in Heterogeneous Untidy Traffic in Developing Countries / Sonal Ahuja
Development of a Driver Assistant System for Improving Passenger Ride Comfort of Automobiles / Feng Wang ; Ni Ma ; Hikaru Inooka
Confirmation of the Natural Yawing Frequency of Large Sized Vehicle: Distinguishing the Vehicle System From the Driver-Vehicle System / Fujio Momiyama ; Takashi Sasaki ; Hiroyasu Nagae
Car Crash Zones Based on Driver's Collision Avoidance Behavior / Masatake Shiraishi ; Yukiya Tsuchiya
Ergonomic Contribution to HGV Freight Handling Bay Entry Manoeuvring: Analysis of Lorry Driver Activity and Formation Needs / Florence Hella ; Jean-Francois Schouller ; Valerie Laville
Reliable Subjective Assessment of Vehicle Handling by Drivers: Is It an Elusive Goal? / D. A. Crolla ; J. P. Whitehead
Study on Driver and Vehicle System With Lane-Tracking Control System Using Steering Torque Input / Masao Nagai ; Hidehisa Yoshida ; Kiyotaka Shitamitsu ; Hiroshi Mouri
A Tutorial on Present and Future Global Approximation Issues With Application to a Vehicle Design Problem / Carlo M. Miano ; Massimiliano Gobbi ; Giampiero Mastinu
Modular Structural Component Design Using the First Order Analysis and Decomposition-Based Assembly Synthesis / Onur L. Cetin ; Kazuhiro Saitou ; Hidekazu Nishigaki ; Shinji Nishiwaki ; Tatsuyuki Amago ; Noboru Kikuchi
Control of the Vehicle's Running Properties as a Pre-Condition for Designing Wheel Drive Systems / V. V. Vantsevich ; L. Amani
Optimization Techniques for Hybrid Electric Vehicle Analysis Using Advisor / Tony Markel ; Keith Wipke
The Integration of Reliability Techniques as an Aid to the Design Optimisation of an Earth Moving Machine / G. Arcidiacono ; M. Delogu
Control Law for an Engine Starter Clutch in a Parallel Hybrid Electric Vehicle / Robert C. Baraszu ; Susan R. Cikanek
Nonlinear Modeling and Analysis of Steering Systems for Hybrid Vehicles / Val D. Mills ; John R. Wagner ; Darren M. Dawson
Nonlinear Active Rollover Prevention Control Strategies for a 5-Axle Tractor/Semitrailer / A. Scott Lewis ; Moustafa El-Gindy
A Comparison of the Relative Benefits of Active Front Steering and Active Rear Steering When Coordinated With Direct Yaw Moment Control / M. A. Selby ; W. J. Manning ; M. D. Brown
Electro-Hydraulic Camless Valvetrain System Modeling / J. Asgari ; D. Hrovat
Multiple Target Tracking in the Adaptive Cruise Control Environment Using Multiple Models and Probabilistic Data Association / Derek Caveney ; J. Karl Hedrick
The Use of Modeling and Simulation in Ground Vehicle Analysis / Michael D. Letherwood ; David D. Gunter
Finite Element Modeling of Non-Orthogonal Loosely Woven Fabrics in Advanced Occupant Restraint Systems / Romil R. Tanov ; Marlin Brueggert
Racing Car Simulation and the Virtual Race Track / Blake Siegler ; David Crolla
Optimal Engine Operations in Series Hybrid Electric Vehicles / Wenping Wang
Utilising the Potential of Individual Wheel Control on a 6X6 Off-Road Vehicle / Andrew Jackson ; Michael Brown ; Adrian Woodhouse ; Michael Parsons
Author Index
Genetic Algorithm-Based Maximum Likelihood Parameter Estimation for Transit Buses / Jie Xiao ; Bohdan T. Kulakowski
Application of Neural Network Friction Component Model in Automotive Drivetrain Simulations / M. Cao ; K. W. Wang ; Y. Fujii ; W. E. Tobler
Performance of Developed Driving Simulator With Full Vehicle Model of Multibody Dynamics / Taichi Shiiba ; Yoshihiro Suda
88.

図書
図書
88. Mechanical engineering design education 2001: issues and case studies : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York
sponsored by the Design Engineering Division, ASME ; Edmund C. Feldy
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vi, 184 p. ; 28 cm
シリーズ名: DE ; vol. 113
所蔵情報: loading…
目次情報: 続きを見る
Successes in Mechanical Engineering Design Education
Engineering Across Borders: Educational Practices for Improving the Effectiveness of Globally Distributed Engineering Design Teams / Kenneth David ; John R. Lloyd
Developing New Methods of Improving Design Productivity by Focusing on Transitions Between Working Situations / Kjetil Kristensen ; Hans Petter Hildre
A New Approach to Teaching a Mechanical Systems Design Course / Musa Jouaneh
See Labs Run: A Design-Oriented Laboratory for Teaching Dynamic Systems / Jorge G. Cham ; Brandon Stafford ; Mark R. Cutkosky
Design Education with Mechatronics
Development of Undergraduate Mechatronics Course in the School of Mechanical Engineering at Georgia Tech / I. Charles Ume ; Akio Kita
Capstine Design Projects for Mechatronic Design in Mechanical Engineering Department / Abdulkadir Erden
Functional Design Tree for Mechatronic Projects in Mechanical Engineering Design Course / Meltem Korkmazel
Methods and Tools for the Design of Mechatronic Products: Concepts and Examples From the University of Darmstadt / Reiner Anderl ; Sven Kleiner
Design Education with MEMS
Microsystems Challenges for Engineering Education / James J. Allen
Teaching MEMS to Mechanical Engineering Students: A Paradigm Shift From Macro to Micro World / Imin Kao
University - National Laboratory Collaboration on MEMS Design Education / Mohammad I. Kilani ; Paul C. Galambos ; Yusef S. Haik ; Ching-Jen Chen
MEMS Design Education by Case Studies / Ryszard J. Pryputniewicz
Case Studies in Mechanical Engineering Design
Wheelchair Attachable System for Stepping UP / Frederick Barrigar ; Christopher Johnson ; Julie Sanchez ; James Wasiloff
Anti-Hair Snare Pool Drain Cover / Ralph L. Barnett ; Peter J. Poczynok
Portable Power in the Backcountry: Design and Development of a Modular Water Heater / Robert C. Beckius ; Michael R. Powell ; Seung-Ho Hong
Wilbur and Orville Wright and the Evolution of Efficient Aircraft Propellers / Robert L. Ash ; Stanley J. Miley ; Drew Landman ; Kenneth W. Hyde
Failure Analysis and Prevention
Failure Analysis and Redesign of a Pressure Powered Pump Mechanism / John S. Brader ; David N. Rocheleau
Evaluation of a Failure in a Chlorine Production Facility / Stephen P. Andrew ; Robert D. Caligiuri ; Lawrence E. Eiselstein ; T. Kim Parnell
Failure Analysis and Redesign of Some Import Motor-Driven Devices of Valve / Jiancheng Zhang ; Entao Zhou ; Shichang Zhou ; Guodong Li ; Pengjie Liu
Failure Analysis of the Rear Axles in a Sports Utility Vehicle (SUV) / Jahan Rasty ; Xiaobin Le
Failure Mode Analysis of Rolling Elements Bearings / Rakesh Sehgal ; O. P. Gandhi ; S. Angra
Young Design Engineer's Paper Competition
Introduction / Michael Keefe
Abutment Hammering Tool for Dental Implants / John O'Callaghan, Jr. ; Robert Birichi ; Timothy Goddard ; John Jagodnik ; Sean Westbrock
Design of a Human Powered Moonbuggy / Emily Kinnaird Goforth
Design of a Mobility Mechanism for a Rescue and Surveillance Vehicle / Amip J. Shah ; Michael L. Resciniti
Author Index
Successes in Mechanical Engineering Design Education
Engineering Across Borders: Educational Practices for Improving the Effectiveness of Globally Distributed Engineering Design Teams / Kenneth David ; John R. Lloyd
Developing New Methods of Improving Design Productivity by Focusing on Transitions Between Working Situations / Kjetil Kristensen ; Hans Petter Hildre
89.

図書
図書
89. Threaded and riveted connections, design issues, reliability, stress analysis, and failure prevention : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 113 p. ; 28 cm
シリーズ名: DE ; vol. 114
所蔵情報: loading…
目次情報: 続きを見る
A Study of Early Stage Self-Loosening of Bolted Joints / Yanyao Jiang ; Bin Huang ; Hua Zhao
Calculation of Nuts Threads Stripping / Manuel Martinez-Martinez ; Andre Ferrand ; Jean Guillot
Three-Dimensional Analysis of Double Rivet-Row Lap Joints: Part 1 -- Non-Countersunk Rivets / K. Iyer ; C. A. Rubin ; G. T. Hahn
Three-Dimensional Analysis of Double Rivet-Row Lap Joints: Part II -- Countersunk Rivets
Rapid Simulation of Preloaded Bolted Assemblies for Slewing Bearings / Dimitri Leray ; Alain Daidie
Theoretical Analysis of the Strength of Internal Gear Drive With Zero-Tooth-Difference / Wang Shijie ; Guang Hong
The New Approach to the Analysis of Elasto-Plastic Deformation of Solids Within the Bounds of Theory of Processes by A. A. Ilyushin / Kamal Sh. Babamuratov ; Rustam A. Abirov
Multiaxial Impact Behavior and Modeling of ABS Polymer / A. Saigal ; R. Greif ; Y. Duan ; M. A. Zimmerman
Failure Prevention in Fiber Reinforced Composite Materials / J. Merodio ; R. Sancibrian ; F. Viadero
Mixed Mode Interfacial Fracture Toughness Evaluation for Flip-Chip Assemblies and CSP Based on Fracture Mechanics Approaches / Jurgen Auersperg ; Eva Kieselstein ; Andreas Schubert ; Bernd Michel
Parameterized Design of a Supersonic Radome / Michael S. L. Hollis
Design of a Mortar-Deployed Video Imager / John A. Condon
Author Index
A Study of Early Stage Self-Loosening of Bolted Joints / Yanyao Jiang ; Bin Huang ; Hua Zhao
Calculation of Nuts Threads Stripping / Manuel Martinez-Martinez ; Andre Ferrand ; Jean Guillot
Three-Dimensional Analysis of Double Rivet-Row Lap Joints: Part 1 -- Non-Countersunk Rivets / K. Iyer ; C. A. Rubin ; G. T. Hahn
90.

図書
図書
90. Concurrent product and process engineering : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California
sponsored by the Manufacturing Engineering Division, ASME, the Design Engineering Division, ASME ; edited by A. Raj Thangaraj, Rajit Gadh, Samir Billatos
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 354 p. ; 28 cm
シリーズ名: DE ; vol. 85
MED ; vol. 1
所蔵情報: loading…
91.

図書
図書
91. Adaptive structures and material systems 1999 : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee
sponsored by the Aerospace Division, ASME, the Materials Division, ASME, [and] the Design Engineering Division, ASME ; edited by Gregory Washington, James Redmond
出版情報: New York : American Society of Mechanical Engineers, c1999  vii, 411 p. ; 28 cm
シリーズ名: AD ; vol. 59
MD ; vol. 87
所蔵情報: loading…
92.

図書
図書
92. Innovations in vehicle design and development : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee
sponsored by the Design Engineering Division, ASME ; edited by Imtiaz Haque ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1999  v, 185 p. ; 28 cm
シリーズ名: DE ; vol. 101
所蔵情報: loading…
目次情報: 続きを見る
Adapting an Articulated Vehicle to the Drivers / Xiaobo Yang ; Subash Rakheja ; Ion Stiharu
Global Approximation: Performance Comparison of Different Methods, With an Application to Road Vehicle System Engineering / Massimiliano Gobbi ; Giampiero Mastinu
Development of a Tire/Pavement Contact-Stress Model Based on an Artificial Neural Network / Moustafa El-Gindy ; Heidi L. Lewis ; Scott Lewis
Fourier Series-Based Neural Networks for Vehicle System Identification / Imtiaz Haque ; Juergen Schuller
Spatial Multibody Modeling and Vehicle Dynamics Analysis of a High-Mobility, Heavy Cargo Transport Truck With Swing Arm Suspension / Michael D. Letherwood ; David D. Gunter
Analysis of Absorbed Power Distribution in Ride Dynamics-Evaluation of Driver's Comfort / Rick Tong ; Farid Amirouche ; Shuji Nishiyama
Dynamic Interaction Between the Manipulator and Vehicle of a Mobile Manipulator / Ali Meghdari ; M. Durali ; D. Naderi
Development of the General-purposed Program Based on the Concept of Subsystem Assembly for the Analysis of Dynamic Characteristics of Power Transmission System / Weon-Sik Lim ; Han-Sang Jo ; Wook-Jin Jang ; Jan-Moo Lee ; Yeong-II Park
Techniques to Evaluate Heavy Truck Dynamics Using Multi-Body Simulation / Wesley W. Bylsma
Design of a Vehicle Control System for Cloning of Human Driving Behavior / Frank Schaefer
Factors Influencing the Maintenance of Speed: A Driver Model Analysis / Kailash Prasad Thakur
A Topology for Vehicle Stability and Handling Enhancement via Wheelslip Control / Scott Kimbrough
Feasibility Analysis of Open-Loop Rollover Control of Heavy Freight Vehicles / P. J. Liu ; A. K. W. Ahmed
Effects of Heavy Vehicle Speeds on the Structure and Vibration of Bridges / Giuseppe Sammartino ; Zhen L. Chen ; Ming L. Wang
Dynamics of a Three-Wheeled Vehicle Driven by DC-Motors / Yasmina Bestaoui
The Bi-Planar Bicycle / Charles F. Reinholtz ; J. Bay ; R. Randall Soper ; Michael S. Abbot ; D. Grove
Planar Dynamics and Control of a Two-Wheeled Single-Axle Vehicle / Donald E. Grove
Orientation-Regulated Platforms for Use in Biplanar Bicycles
Longitudinal Front Wheel Drive Maneuvers Considering DC-Motors Constraints
Author Index
Adapting an Articulated Vehicle to the Drivers / Xiaobo Yang ; Subash Rakheja ; Ion Stiharu
Global Approximation: Performance Comparison of Different Methods, With an Application to Road Vehicle System Engineering / Massimiliano Gobbi ; Giampiero Mastinu
Development of a Tire/Pavement Contact-Stress Model Based on an Artificial Neural Network / Moustafa El-Gindy ; Heidi L. Lewis ; Scott Lewis
93.

図書
図書
93. Mechanical engineering design education: issues and case studies : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee
sponsored by the Design Engineering Division, ASME ; edited by Edmund C. Feldy
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  v, 103 p. ; 28 cm
シリーズ名: DE ; vol. 102
所蔵情報: loading…
94.

図書
図書
94. Conceptual and innovative design for manufacturing : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee
sponsored by the Design Engineering Division, ASME ; edited by Samir B. Billatos, Byoung Sung Kim
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  v, 117 p. ; 26 cm
シリーズ名: DE ; vol. 103
所蔵情報: loading…
95.

図書
図書
95. Electronics manufacturing issues : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999, Nashville, Tennessee
sponsored by the Design Engineering Division, ASME ; edited by Chittaranjan Sahat ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  vi, 181 p. ; 28 cm
シリーズ名: DE ; vol. 104
所蔵情報: loading…
目次情報: 続きを見る
Technologies in Electronic Manufacturing and Packaging: Increased Productivity and Quality
Introduction / Imin Kao
Interaction Between Wire and Ingot in Wiresaw Slicing / F. Yang ; J. C. M. Li
An Integrated Model for Electromagnetic Field and Heat Transfer in a Cylindrical Silicon Tube Growth System / A. Roy ; Q.-S. Chen ; H. Zhang ; V. Prasad
High Resolution Wafer Surface Topology Measurement Using Phase-Shifting Shadow Moire Technique / S. Wei ; E. Guan ; I. Kao ; F.-P. Chiang
Computational Model for Free Abrasive Machining of Brittle Silicon Using a Wiresaw / M. Bhagavat
Advanced Electronics Manufacturing, Packaging, and Process Technologies
Reliability Analysis of Flip Chip on Board Assemblies Using No-Flow Underfill Materials / Daniel Baldwin ; Ryan Thorpe ; Daniel F. Baldwin
Acoustic Emission Analysis for Fatigue Prediction of Lap Solder Joints in Mode Two Shear / Bryan J. Van De Wal ; Gay Kendall ; Chittaranjan Sahay
Process Characterization and the Effect of Process Defects on Flip Chip Reliability / Brian Lewis ; Hilary Sasso
Fundamental Analyses of Smart Tooling for Assembly of Thin Flexible Circuit and Board Systems / Ruijun Chen
Electronics Manufacturing
Design and Manufacturing Issues / C. Sahay ; Bahgat Sammakia
A Performance and Manufacturability Evaluation of Bump Chip Carrier Packages / Lei L. Mercado ; Vijay Sarihan ; Russel Fiorenzo
Artwork Scaling Factor for Inner Layers in Multi-Layer Board Manufacture / Owen Christofferson
A Study of the Aperture Filling Process in Solder Paste Stencil Printing / J. Pan ; G. L. Tonkay
Design and Implementation of a Flexible Intelligent Electronics Remanufacturing System / I. Fidan ; Russell P. Kraft ; Stephen J. Derby
Thermal Management and Transport in Manufacturing
Impact of On-Die Discrete Heating on Thermal Performance Characteristics of Silicon Based IC Electronic Packages / V. H. Adams ; K. Ramakrishna
Performance of Thermal Enhancements in Chip on Flex / Gary Miller
Integrated Transient Thermal and Mechanical Analysis of Molded PBGA Packages During Thermal Shock / Tien-Yu T. Lee ; Jeff Cook
Thermal Issues That Arise Due to Manufacturing Processes: Evaluation and Measurement Techniques / Sanjeev Sathe
Structural Mechanics and Materials Issues in Manufacturing
A Model of Crack Nucleation in Layered Electronic Assemblies Under Thermal Cycling / A. Chandra ; Y. Huang ; Z. Q. Jiang ; K. X. Hu
Constitutive and Cyclic Damage Model of 63Sn-37Pb Solder / V. Stolkarts ; L. M. Keer ; M. E. Fine
A Dual-Phase-Lag Diffusion Model for Predicting Thin Film Growth / J. K. Chen ; J. E. Beraun ; D. Y. Tzou
Effect of Volume on Ceramic Ball-Grid Array Solder Life / Stephen A. McKeown
In-Situ Warpage Measurement During Thermal Cycling of Dielectric Coated SS Substrate for Large Area MCM-D Packaging / Anh X. H. Dang ; I. Charles Ume ; Swapan Bhattacharya
Author Index
Technologies in Electronic Manufacturing and Packaging: Increased Productivity and Quality
Introduction / Imin Kao
Interaction Between Wire and Ingot in Wiresaw Slicing / F. Yang ; J. C. M. Li
96.

図書
図書
96. Reliability, stress analysis, and failure prevention issues in adhesive and bolted connections : presented at the 1999 ASME International Mechanical Engineering Congress and Exposition, November 14-19, 1999 , Nashville, Tennessee
sponsored by the Design Engineering Divsion, ASME ; edited by Erol Sancaktar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  v, 171 p. ; 28 cm
シリーズ名: DE ; vol. 105
所蔵情報: loading…
97.

図書
図書
97. Advanced vehicle technologies : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida
sponsored by the Design Engineering Division, ASME ; edited by Imtiaz Haque
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2000  vi, 187 p. ; 28 cm
シリーズ名: DE ; vol. 106
所蔵情報: loading…
98.

図書
図書
98. Vibration and control of continuous systems : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida
sponsored by the Design Engineering Division, ASME ; edited by Christopher D. Rahn, Jonathan A. Wickert
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2000  v, 155 p. ; 28 cm
シリーズ名: DE ; vol. 107
所蔵情報: loading…
99.

図書
図書
99. Dynamics, acoustics and simulations : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida
sponsored by the Design Engineering Division, ASME, the Dynamics Systems and Control Division, ASME ; edited by Ray P. S. Han ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2000  vi, 307 p. ; 28 cm
シリーズ名: DE ; vol. 108
DSC ; vol. 68
所蔵情報: loading…
目次情報: 続きを見る
A New Approach for the Numerical Integration of Nonlinear Dynamic Systems / Zhao Chang Zheng ; Zhi Xiao Su ; Ray P. S. Han ; Zefang Xu
Free Vibration of In-Planar Rotating Ring: An Analytical Solution / Hamid R. Hamidzadeh
Free Vibration of Spinning Stepped Timoshenko Beams Using Finite Element Method / Z. C. Wang ; W. L. Cleghorn ; S. D. Yu
A Comparison of Component Mode Synthesis Method for Cyclic Structures / Duc-Minh Tran
Multi-Junction, Multi-Branch Torsional Vibration in a Geared Rotating System / Qing Ke Yuan ; David Y. Yao
Chaotic Motions in Resonant Separatrix Bands of a Parametrically Excited Pendulum / Albert C. J. Luo
Real Asymmetric Matrix Eigenvalue Analysis for Dynamic Instability Problems / Heewook Lee ; Noboru Kikuchi
Dynamics of Two Time-Delay Coupled Relaxation Oscillators of the van der Pol Type / Asok K. Sen ; Richard H. Rand
A Symbolic-Numerical Method for Nonlinear Rotor Dynamics Under Fluid Confinement / Miguel Moreira ; Jose Antunes ; Heitor Pina
Assessment of Solutions to Vibration Problems Involving Piecewise Constant Exertions / L. Dai
Visualization of Finite Element Automobile Crash Simulation Using Virtual Reality Technology / Ricardo Moraes ; David Nicholson ; Eduardo Divo
Simulation of Respiratory System for Identifying Airway Occlusion / A. M. Al-Jumaily ; P. Mithraratne
Blind Identification of Impact Forces From Multiple Remote Vibratory Measurements / J. Antunes ; P. Izquierdo ; M. Paulino
Identification and Prediction of Frame Structure Dynamics by Spatial Matrix Identification Method / Masaaki Okuma ; Ward Heylen ; Hisayoshi Matsuoka ; Paul Sas
Radar Target Identification With JEM Effect / Xiaodong Yao ; Zhongliang Jing
Modeling and Prediction of Acoustic Resonance for Round Supersonic Jets / A. W. Cary ; W. W. Bower ; A. B. Cain ; E. J. Kershen
Simulation of Vibration and Acoustic Radiation of Finite Underwater Cylindrical Shells / X. M. Zhang ; G. R. Liu ; K. Y. Lam
A Study on Boundary Integral Equation for Acoustic Radiation From Axisymmetric Bodies / C. Cai ; H. Zheng
Nonlinear Interaction of Ultrasonic Beams in Air / Dong Weiguo ; Lim Mong King ; Huang Xiaoyang
FEM/BEM Simulation of Vibroacoustics of a Fluid-Loaded, Stiffened Plate Under Combined Force-Moment Excitation
Silent Chain Noise of Cab Motorcycles / M. Pan ; Eddy T. Shieh
A Macromodel for Dynamic Simulation of Microelectromechanical Systems / W. Z. Lin ; K. H. Lee ; S. P. Lim ; P. Lu
Boundary Conditions for a Traveling Web Detaching From a Rotating Cylinder / Christoph G. Reuter
Nonlinear Dynamic Analysis of Rotor Supported by Finite Journals With a New Unsteady Nonlinear Oil-Film Force Model / Wen Zhang ; Jianping Guo ; Pengqing Qiu
Modal Analysis in Coupled Vibration of Serpentine Belt Drive System / Jean W. Zu ; Lixin Zhang
Modeling of an Elastic Fin Micromotor / S. Dong
Design and Simulation of Robust and Adaptive Controls for a Nonlinear String System / Weiwei Jin ; Zhihua Qu ; Kurt Lin
Adaptive Learning Algorithm for Cerebellar Model Articulation Controller: Neural Network Based Hybrid-Type Controller--Part I / Magdy Mohamed Abdelhameed ; Sabri Cetinkunt
Adaptive Learning Algorithm for Cerebellar Model Articulation Controller: Neural Network Based Hybrid-Type Controller--Part II / Unat Pinson
Path Design of Large Flexible Material Handing / Kuo-Chi Lin ; Annie S. Wu ; Tanmoy Joshi
Multi-Sensor Fusion for Robot Positioning Based on Dempster-Shafer Methods / Weidong Qu ; Yugeng Xi
Design Optimization of a Special Mounting System: Floating Raft for Ship Power Equipment Vibration Isolation / Wang Yu ; HongXing Hua ; Rongying Shen
Time-Varying Modal Analysis by SDOF Wavelets / Arata Masuda ; Akira Sone
Finite Element Simulation of Damage in Dynamically Loaded Weldments
Using Analytical/Numerical Matching With Finite Element Analysis to Solve a Fluid-Loaded Structural Dynamics Problem / Christopher D. Park ; Linda P. Franzoni
Chatter Synchronization in Vibratory Drilling / Alexander M. Gouskov ; Sergey A. Voronov ; Stephen A. Batzer
Second Order Poincare Map to Study Dynamical Behavior of Nonsymmetrical Gyrostat Satellite / K. H. Shirazi ; M. H. Ghaffari-saadat
Dynamics of a Nonlinear System Under Combined Parametric and Quasiperiodic Excitation / Chin An Tan ; Bongsu Kang
Differential Quadrature Element Method for the Analysis of Vibration of Frame Structures Having Nonprismatic Members Considering Warping Torsions / Chang-New Chen
Static Deflection and Free Vibration of Nonprismatic Beam Structures Solved by DQEM Using EDQ
Author Index
A New Approach for the Numerical Integration of Nonlinear Dynamic Systems / Zhao Chang Zheng ; Zhi Xiao Su ; Ray P. S. Han ; Zefang Xu
Free Vibration of In-Planar Rotating Ring: An Analytical Solution / Hamid R. Hamidzadeh
Free Vibration of Spinning Stepped Timoshenko Beams Using Finite Element Method / Z. C. Wang ; W. L. Cleghorn ; S. D. Yu
100.

図書
図書
100. Recent advances in design for manufacture (DFM) : new concepts and tools, new applications, new theory and application of information technologies, new concepts and ideas for the future : presented at the 2000 ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2000, Orlando, Florida
sponsored by the Design Engineering Division, ASME ; edited by Byoung Sung Kim
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2000  v, 150 p. ; 28 cm
シリーズ名: DE ; vol. 109
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼