close
1.

電子ブック
ＥＢ
1. Handbook of Molded Part Shrinkage and Warpage
Jerry M. Fischer, Jerry Fischer
出版情報: Elsevier ScienceDirect Books , William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Introduction to Plastics Processing
Shrinkage and Warpage / 2：
Causes of Molded-Part Variation: Part Design / 3：
Causes of Molded-Part Variation: Material / 4：
Causes of Molded-Part Variation: Mold Design / 5：
Causes of Molded-Part Variation: Processing / 6：
Factors Affecting Post-Mold Shrinkage and Warpage / 7：
Controlling Mold and Post-Mold Shrinkage and Warpage / 8：
Computer-Aided Analysis / 9：
Case Studies / 10：
Data / 11：
Conversion Factors and Equivalents / Appendix A：
Abbreviations, Acronyms and Material Names / Appendix B：
Glossary
Introduction to Plastics Processing
Shrinkage and Warpage / 2：
Causes of Molded-Part Variation: Part Design / 3：
2.

電子ブック
ＥＢ
2. Polylactic Acid
Lee Tin Sin, W. A. W. A. Rahman, Wan A. W. A. Rahman, Wan Aizan Wan Abdul Rahman, A. R. Rahmat, Abdul R. Rahmat, Abdul Razak Rahmat, Plastics Design Library, Rahmat Abdul
出版情報: Elsevier ScienceDirect Books , Norwich : William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Initial Glance over Polylactic acid / Chapter 1：
Synthesis and Production of Polylactic Acid / Chapter 2：
Thermal Properties of Polylactic acid / Chapter 3：
Chemical Properties of Polylactic acid / Chapter 4：
Mechanical Properties of Polylactic Acid / Chapter 5：
Rheology Properties of Polylactic Acid / Chapter 6：
Degradation and Stability of Polylactic Acid / Chapter 7：
Applications of Polylactic Acid / Chapter 8：
Initial Glance over Polylactic acid / Chapter 1：
Synthesis and Production of Polylactic Acid / Chapter 2：
Thermal Properties of Polylactic acid / Chapter 3：
3.

電子ブック
ＥＢ
3. Film Properties of Plastics and Elastomers (Third Edition)
Laurence W. McKeen, Plastics Design Library.
出版情報: Elsevier ScienceDirect Books , William Andrew Publishing, 2012
所蔵情報: loading…
目次情報: 続きを見る
Preface
Introduction to Plastics and Polymers / 1：
Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers / 2：
Production of films / 3：
Markets and Applications for films / 4：
Styrenic Plastics / 5：
Polyesters / 6：
Polyamides (Nylons) / 8：
Polyolefins / 9：
Polyvinyls & Acrylics / 10：
Fluoropolymers / 11：
High Temperature/High Performance Polymers / 12：
Elastomers and rubbers / 13：
Renewable Resource or biodegradable polymers / 14：
Appendices
Permeation Unit Conversion Factors
Vapor Transmission rate Conversion factors
Indices
Preface
Introduction to Plastics and Polymers / 1：
Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers / 2：
4.

電子ブック
ＥＢ
4. Polylactic Acid
Lee Tin Sin, W. A. W. A. Rahman, Wan A. W. A. Rahman, Wan Aizan Wan Abdul Rahman, A. R. Rahmat, Abdul R. Rahmat, Abdul Razak Rahmat, Plastics Design Library, Rahmat Abdul
出版情報: Elsevier ScienceDirect Books , Norwich : William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Initial Glance over Polylactic acid / Chapter 1：
Synthesis and Production of Polylactic Acid / Chapter 2：
Thermal Properties of Polylactic acid / Chapter 3：
Chemical Properties of Polylactic acid / Chapter 4：
Mechanical Properties of Polylactic Acid / Chapter 5：
Rheology Properties of Polylactic Acid / Chapter 6：
Degradation and Stability of Polylactic Acid / Chapter 7：
Applications of Polylactic Acid / Chapter 8：
Initial Glance over Polylactic acid / Chapter 1：
Synthesis and Production of Polylactic Acid / Chapter 2：
Thermal Properties of Polylactic acid / Chapter 3：
5.

電子ブック
ＥＢ
5. Handbook of Molded Part Shrinkage and Warpage
Jerry M. Fischer, Jerry Fischer
出版情報: Elsevier ScienceDirect Books , William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Introduction to Plastics Processing
Shrinkage and Warpage / 2：
Causes of Molded-Part Variation: Part Design / 3：
Causes of Molded-Part Variation: Material / 4：
Causes of Molded-Part Variation: Mold Design / 5：
Causes of Molded-Part Variation: Processing / 6：
Factors Affecting Post-Mold Shrinkage and Warpage / 7：
Controlling Mold and Post-Mold Shrinkage and Warpage / 8：
Computer-Aided Analysis / 9：
Case Studies / 10：
Data / 11：
Conversion Factors and Equivalents / Appendix A：
Abbreviations, Acronyms and Material Names / Appendix B：
Glossary
Introduction to Plastics Processing
Shrinkage and Warpage / 2：
Causes of Molded-Part Variation: Part Design / 3：
6.

電子ブック
ＥＢ
6. Handbook of Bioplastics and Biocomposites Engineering Applications
Srikanth Pilla
出版情報: Wiley Online Library - AutoHoldings Books , Chichester : John Wiley & Sons, Inc., 2011
所蔵情報: loading…
7.

電子ブック
ＥＢ
7. Handbook of Engineering and Specialty Thermoplastics: Polyolefins and Styrenics
Johannes Karl Fink, Visakh P. M., Sabu Thomas
出版情報: Wiley Online Library - AutoHoldings Books , Hoboken : John Wiley & Sons, Inc., 2010
所蔵情報: loading…
目次情報: 続きを見る
Preface
Metathesis Polymers / 1：
Monomers / 1.1：
Polymerization and Fabrication / 1.2：
Properties / 1.3：
Fabrication Methods / 1.4：
Fluorinated Polymers / 1.5：
Special Additives / 1.6：
Applications / 1.7：
Suppliers and Commercial Grades / 1.8：
Safety / 1.9：
References
Cyclic Olefin Copolymers / 2：
Environmental Impact and Recycling / 2.1：
Ultra HighMolecularWeight Poly(ethylene) / 3：
Poly(methyl)pentene / 3.1：
Ionomers / 4.1：
Poly(isobutylene) / 5.1：
Ethylene Vinyl Acetate Copolymers / 6.1：
Acrylonitrile-Butadiene-Styrene Polymers / 7.1：
High Impact Poly(styrene) / 8.1：
Styrene/Acrylonitrile Polymers / 9.1：
Methyl methacrylate/Butadiene/Styrene Polymers / 10.1：
Acrylonitrile/Styrene/Acrylate Polymers / 11.1：
Index / 12.1：
Tradenames
Acronyms
Chemicals
General Index
Preface
Metathesis Polymers / 1：
Monomers / 1.1：
8.

電子ブック
ＥＢ
8. Handbook of Engineering and Specialty Thermoplastics: Water Soluble Polymers
Johannes Karl Fink
出版情報: Wiley Online Library - AutoHoldings Books , John Wiley & Sons, Inc., 2011
所蔵情報: loading…
目次情報: 続きを見る
Preface
Poly(ethylene oxide) / 1：
Monomers / 1.1：
Polymerization Fabrication / 1.2：
Properties / 1.3：
Special Additives / 1.4：
Applications / 1.5：
Supplier and Commercial Grades / 1.6：
Environmental Impact and Recycling / 1.7：
Poly(vinyl alcohol) / 2：
Suppliers and Commercial Grades / 2.1：
Safety / 2.6：
Polysaccharides / 2.7：
Polymers / 3.1：
Starch / 3.2：
Chitosan / 3.3：
Carboxymethyl cellulose / 3.4：
Guar / 3.5：
Carrageenan / 3.6：
Poly((meth)acrylic acid) / 3.7：
Polymerization and Fabrication / 4.1：
Poly(acrylamide) / 4.3：
Poly(vinylamine) / 5.1：
Poly(vinylpyridine) / 6.1：
Poly(vinylimidazole) / 7.1：
Poly(vinylpyrrolidone) / 8.1：
Other Cationic Polymers / 9.1：
Manufacture / 10.1：
Other Anionic Polymers / 10.2：
2-Acrylamido2-methyl-1-propane sulfonic acid / 11.1：
Poly(sulfonicacid)s / 11.2：
Sulfonated Asphalt / 11.3：
Lignosulfonate / 11.4：
Index
Preface
Poly(ethylene oxide) / 1：
Monomers / 1.1：
9.

電子ブック
ＥＢ
9. Handbook of Industrial Water Soluble Polymers
Williams, Peter A. Williams
出版情報: Wiley Online Library - AutoHoldings Books , Wiley-Blackwell, 2007
所蔵情報: loading…
10.

電子ブック
ＥＢ
10. Handbook of Plastic Optics
Stefan B?umer, Stefan B?aumer, Stefan B?aumer
出版情報: Wiley Online Library - AutoHoldings Books , John Wiley & Sons, Inc., 2010
所蔵情報: loading…
目次情報: 続きを見る
Introduction / Dr. Stefan BaumerChapter 1：
Optomechanics of plastic optical components / Prof. Dr. Michael PfefferChapter 2：
Tooling / Thomas Bauer MarshallChapter 3：
Metrology of injection molded optics / Chapter 4：
Optical Plastics / Zeon CorporationChapter 5：
Coating on Plastic / Dr. Ulrike SchulzChapter 6：
Injection molding Equipment & Process / Dr. Thomas WalterChapter 7：
Cost model of injection molded optics / Jukka-Tapani MakinenChapter 8：
Applications / Chapter 9：
Introduction / Dr. Stefan BaumerChapter 1：
Optomechanics of plastic optical components / Prof. Dr. Michael PfefferChapter 2：
Tooling / Thomas Bauer MarshallChapter 3：
11.

電子ブック
ＥＢ
11. High Performance Polymers and Engineering Plastics
Vikas Mittal, Vikas Mittal
出版情報: Wiley Online Library - AutoHoldings Books , Wiley-Scrivener, 2011
所蔵情報: loading…
目次情報: 続きを見る
Preface
List of Contributors
High Performance Polymers: An Overview / V. Mittal1：
Introduction / 1.1：
Poly (ether amide) and Poly(ether amide-imide) / 1.2：
Poly(arylene ether) / 1.3：
Benzoxazine Polymers / 1.4：
Poly(ether ether ketone) (PEEK) / 1.5：
Polytriazole / 1.6：
Hyperbranched Conjugated Polymers / 1.7：
Alternating Copolymers / 1.8：
References / 1.9：
Synthesis and Properties of Polyoxadiazoles / Dominique de Figueiredo Gomes2：
Synthesis of Polyoxadiazoles in Poly(phosphoric acid) / 2.1：
Thermal and Mechanical Properties of Polyoxadiazoles / 2.3：
Application Fields / 2.4：
Conjugated Polymers Based on Benzo[l,2-b:4,5-b'] dithiophene for Organic Electronics / Huaxing Zhou ; Wei You2.5：
General Synthetic Methods for BDT Monomers and Polymers / 3.1：
Application of BDT-Based Polymers in OFET and PSC / 3.3：
Outlook / 3.4：
Polysulfone-Based Ionomers / Cristina Iojoiu ; Rakhi Sood3.5：
Polysulfone Backbone and Selection of the Ionic Function / 4.1：
Lonomer Synthesis and Characterization / 4.3：
Conclusion / 4.4：
High-Performance Processable Aromatic Polyamides / S Banerjee ; S Maji4.5：
Monomers / 5.1：
Polymerization / 5.3：
Major Problem with Aromatic Polyamides / 5.4：
Approaches to Processable Polyamides / 5.5：
Processable Linear Aromatic Polyamides / 5.6：
Processable Hyperbranched Aromatic Polyamides / 5.7：
Properties / 5.8：
Applications / 5.9：
Phosphorus-Containing Polysulfones / Oana Petreus ; Tudor Petreus5.10：
Synthesis of Phosphorus Containing Polysulfones / 6.1：
Properties of Phosphorus-Containing Polysulfones (P-PSF) / 6.3：
High Performance Applications of Phosphorus-Containing Polysulfones / 6.4：
Synthesis and Characterization of Novel Polyimides / Atsushi Morikawa6.5：
Synthesis of Polyimides / 7.1：
Properties of Aromatic Polyimides / 7.3：
Conclusions / 7.4：
The Effects of Structures on Properties of New Polytriazole Resins / Farong Huang ; Liqiang Wan ; Lei Du ; YanhongHu ; Yanpeng E ; Yujing Li7.5：
The Preparation of Polytriazole Resins / 8.1：
Reactivity of Crosslinkable Polytriazole Resins / 8.3：
Glass Transition Temperatures of Polytriazole Resins / 8.4：
Mechanical Properties of Polytriazole Resins / 8.5：
Dielectric Properties of Polytriazole Resins / 8.6：
Thermal Stabilities of Polytriazole Resins / 8.7：
Acknowledgement / 8.8：
High Performance Fibers / Mehdi Afshari ; Richard Kotek ; Peng Chen8.10：
PIPD or "M5" Rigid Rod / 9.1：
"Zylon" PBO Rigid Rod Polymer Fibers / 9.2：
Aromatic Polyamide-Rigid Rod "Kevlar" Poly(p-Phenylene Terephthalamide) Fibers / 9.3：
Spectra, Dyneema UHMWPE Flexible Polymer Chain / 9.4：
Carbon Fibers / 9.5：
Advances in Improving Performance of Conventional Fibers / 9.6：
Acknowledgments / 9.7：
Synthesis and Characterization of Poly (aryl ether ketone) Copolymers / G Wang9.9：
General Synthetic Methods of PAEK Copolymers / 10.1：
Synthesis and Characterization of Structural Poly (aryl ether ketone) Copolymers / 10.3：
Synthesis and Characterization of Liquid Crystalline Poly (aryl ether ketone) Copolymers / 10.4：
Synthesis and Characterization of Poly (aryl ether ketone) Copolymers with Pendent Group / 10.5：
Synthesis and Characterization of poly (aryl ether ketone) copolymers with Containing 2,7 -Naphthalene Moieties / 10.6：
Liquid Crystalline Thermoset Epoxy Resins / P. Kannan ; P. Sudhakara10.7：
Liquid Crystals / 11.1：
Liquid Crystalline Thermosets Based on Epoxy Resins / 11.2：
Synthesis and Physical Properties of LCERs / 11.3：
Index / 11.4：
Preface
List of Contributors
High Performance Polymers: An Overview / V. Mittal1：
12.

電子ブック
ＥＢ
12. Basics of Troubleshooting in Plastics Processing: An Introductory Practical Guide
N. S. Murralisrinivasan
出版情報: Wiley Online Library - AutoHoldings Books , Wiley-Scrivener, 2011
所蔵情報: loading…
目次情報: 続きを見る
Preface
Introduction / 1：
Market Trends / 1.1：
Importance of Plastics / 1.2：
Plastics Processing / 1.3：
Fundamental / 1.4：
References
Plastics Materials / 2：
Properties and Processing / 2.1：
Polyethylene / 2.2：
Polypropylene (PP) / 2.3：
Polystyrene / 2.4：
Polyvinylchloride (PVC) / 2.5：
Engineering Plastics / 2.6：
Advantages / 2.7：
Plastics Additives / 2.8：
Antioxidants / 3.1：
Anti-block Agents / 3.2：
Antistatic Agent / 3.3：
Clarifying Agents / 3.4：
Slip Additives / 3.5：
Processing Aids / 3.6：
Antifogging Agents / 3.7：
Antiblocking Agents / 3.8：
Heat Stabilizers / 3.9：
Lubricants / 3.10：
Plasticizers / 3.11：
Coupling Agents or Surface Modifiers / 3.12：
Release Agents / 3.13：
Flame Retardants / 3.14：
Pigments / 3.15：
Light Stabilizers / 3.16：
Impact Modifiers / 3.17：
Blowing Agents / 3.18：
Nucleating Agents / 3.19：
Biocides / 3.20：
Fillers / 3.21：
Fundamentals / 3.22：
Focus on Plastics Processing / 4：
Injection Molding / 4.2：
Extrusion / 4.3：
Blow Molding / 4.4：
Thermoforming / 4.5：
Rotational Molding / 4.6：
Troubleshooting - Problems and Solutions / 4.7：
Troubleshooting - Requirements / 5.1：
Injection Molding - Troubleshooting / 5.2：
Troubleshooting - Extrusion / 5.3：
Troubleshooting - Blow molding / 5.4：
Troubleshooting - Thermoforming / 5.5：
Troubleshooting - Rotational molding / 5.6：
Future Trends / 6：
Productivity / 6.1：
Automotive Applications / 6.2：
Medical Applications / 6.3：
Environmental Issues / 6.4：
Index. / 6.5：
Preface
Introduction / 1：
Market Trends / 1.1：
13.

電子ブック
ＥＢ
13. A Concise Introduction to Additives for Thermoplastic Polymers
Johannes Karl Fink
出版情報: Wiley Online Library - AutoHoldings Books , Hoboken : John Wiley & Sons, Inc., 2009
所蔵情報: loading…
目次情報: 続きを見る
Introduction / 1：
Classification / 1.1：
References
Plasticizers / 2：
Principle of Action / 2.1：
Principle of Selection / 2.2：
Characterization / 2.3：
Risks and Drawbacks / 2.4：
Classes of Plasticizers / 2.5：
Specific Examples of Application / 2.6：
Fillers / 3：
Surface Modification / 3.1：
Special Applications / 3.2：
Colorants / 4：
Physics Behind a Color / 4.1：
Color Index / 4.2：
Test Standards / 4.3：
Pigments / 4.4：
Organic Colorants / 4.5：
Optical Brighteners / 5：
Basic Principles / 5.1：
Measurement / 5.2：
Inorganic Brighteners / 5.3：
Organic Optical Brighteners / 5.4：
Antimicrobial Additives / 6：
Modes of Action / 6.1：
Special Formulations / 6.2：
Flame Retardants / 7：
Mechanisms of Flame Retardants / 7.1：
Smoke Suppressants / 7.2：
Admixed Additives / 7.3：
Bonded Additives / 7.4：
Lubricants / 8：
Methods of Incorporation / 8.1：
Types of Lubricants / 8.3：
Antistatic Additives / 8.4：
Types of Additives / 9.1：
Areas of Application / 9.2：
Additives in Detail / 9.3：
Slip Agents / 10：
Basic Principles of Action / 10.1：
Compounds / 10.2：
Surface Improvers / 10.3：
Additives / 11.1：
Nucleating Agents / 12：
Crystalline Polymers / 12.1：
Experimental Methods / 12.2：
Classes of Nucleating Agents / 12.3：
Crystallization Accelerators / 12.4：
Clarifying Agents / 12.5：
Antifogging Additives / 13：
Field of Use / 13.1：
Principles of Action / 13.2：
Conventional Compounds / 13.3：
Compounds for Grafting / 13.4：
Antiblocking Additives / 14：
Examples of Uses / 14.1：
Hydrolysis / 15：
Hydrolytic Degradation / 15.1：
Polymers / 15.2：
Dehydrochlorination Stabilizers / 16：
Dehydrochlorination of PVC / 16.1：
Stabilizers / 16.2：
Alkyl Tin Compounds / 16.2.1：
Acid Scavengers / 17：
Acid Scavenging / 17.1：
Examples of Formulation / 17.2：
Metal Deactivators / 18：
Action of Metals in Polymers / 18.1：
Usage / 18.2：
Examples of Metal Deactivators / 18.3：
Oxidative Degradation / 19：
Autoxidation / 19.1：
Inhibition of Autoxidation / 19.2：
Degradation by Light / 20：
Photolysis / 20.1：
Photooxdation / 20.2：
UV Stabilizers / 20.3：
Blowing Agents / 21：
Ozone Depletion Potential / 21.1：
Test Methods / 21.3：
Compatibilizers / 21.4：
Estimation of Compatibility / 22.1：
Special Examples / 22.2：
Prediction of Service Time / 23：
Accelerated Aging / 23.1：
Theory of Critical Distances / 23.2：
Monte Carlo Methods / 23.3：
Issues in Matrix Composites / 23.4：
Safety and Hazards / 24：
Antifogging Agents / 24.1：
Other / 24.4：
Index
Acronyms
Chemicals
General Index
Introduction / 1：
Classification / 1.1：
References
14.

電子ブック
ＥＢ
14. Handbook of Benzoxazine Resins
Hatsuo; Agag, Tarek Ishida, Tarek Agag, Hatsuo Ishida, Tarek Agag
出版情報: Elsevier ScienceDirect Books Complete , Elsevier, 2011
所蔵情報: loading…
目次情報: 続きを見る
Preface
Introduction / Part I：
Overview and historical background of polybenzoxazine research / H. Ishida1：
Physical and Chemical Properties of Benzoxazine Resins / Part II：
Synthesis of benzoxazines in solutions and melt / Jin-Ping Liu2：
Molecular modeling / Yi Gu ; Ming Li3：
Mono-substituted phenol-based benzoxazines : Inevitable dimerization via self-termination and its metal complexation / S. Chirachanchai ; S. Phongtamrug ; A. Laobuthee ; K. Tashiro4：
Using molecular simulation to predict the physical and mechanical properties of polybenzoxazines / I. Hamerton ; B.J. Howlin ; A.L. Mitchell ; S.A.Hall ; L. McNamara5：
Chemorheology of benzoxazine-based resins / S. Rimdusit ; C. Jubsilp ; P. Kunopast ; W. Bangsen6：
Polymerization kinetics / 7：
Electrochemical polymerization of benzoxazines / Wei Chen8：
Light Induced Reactions of Benzoxazines / M.At. Tasdelen ; B. Kiskan ; B. Gacal ; F. Kasapoglu ; L. Cianga ; Y. Yagci9：
Effect of Neighboring Groups on Enhancing Benzoxazine Autocatalytic Polymerization / M. Baqar ; T. Agag ; S. Qutubuddin10：
Catalytic Opening of Lateral Benzoxazine Rings by Thiols / I. Gorodisher ; R.J. DeVoe ; R.J. Webb11：
Physical and Chemical Properties of Cross-linked Polybenzoxazines / Part III：
Hydrogen bonding of polybenzoxazines / Ho-Dong Kim12：
Polybenzoxazines of Enhanced Thermal Properties: The Role of Additional Non-Benzoxazine Polymerizable Groups / S. Geiger13：
Thermal degradation mechanism of polybenzoxazines / J. Hacaloglu ; T. Uyer14：
Main-chain, Side-chain, Telechelic and Supramolecular Benzoxazine Architectures / Part IV：
Various approaches for main-chain type benzoxazine polymers / S. Alhassan ; D. Schiraldi15：
Side and end chain benzoxazine functional polymers / 16：
Supramolecular chemistry of benzoxazines: from simple, selective, effective, and efficient macrocyclization pathway to host-guest properties / 17：
Main-chain type benzoxazine oligomers: A new concept for easily processable high performance polybenzoxazines / Jia Liu18：
Renewable Resources Based Polybenzoxazine Materials / Part V：
Study of a cardanol-based benzoxazine as reactive diluent and toughening agent of conventional benzoxazines / P. Campaner ; D. D'Amico ; L. Longo ; C. Stifani ; A. Tarzia ; S. Tiburzio19：
Polybenzoxazine Blends and Alloys / Part VI：
Polybenzoxazine/polyimide alloys / T. Takeichi ; T. Kawauchi20：
Polybenzoxazine/polyurethane alloys / H. Yeganeh21：
The Blends of a Silicon-containing Arylacetylene Resin and an Acetylene-Functional Benzoxazine / Farong Huang ; Jianxiang Huang ; Yu Gao ; Yan Zhou ; Lei Du22：
Polybenzoxazine/polysiloxanes / 23：
Polybenzoxazine/bisoxazolines / H. Kimura ; K. Ohtsuka ; A. Matsumoto24：
Morphological Control of Polybenzoxazines / Part VII：
Morphology and properties of polybenzoxazine Blends / Chongyin Zhang ; Lei Wang ; Rentong Yu ; Sixun Zheng25：
Porous materials from polybenzoxazine / T. Chaisuwan26：
Spherical polybenzoxazine resin / Xinsheng Zheng ; Yang Xue ; Youmiao Xu ; Qianquan Chang27：
Polybenzoxazine Composites, Hybrid Materials and Nanocomposites / Part VIII：
Polybenzoxazine /fiber composites / Qi-chao Ran28：
Polybenzoxazine-clay nanocomposites / A. Akelah29：
Polybenzoxazine-POSS nanocomposites / Riwei Xu ; Dingsheng Yu30：
Polybenzoxazine-CNT nanocomposites / Pengli Zhang ; Jing Wang31：
Polybenzoxazine Applications and Potential Applications / Part IX：
Polybenzoxazines with enhanced flame retardancy / V. Cadiz ; J. C. Ronda ; G. Lligadas ; M. Galia32：
Surface properties of polybenzoxazines / Chih-Feng Wang ; Feng-Chih Chang ; Shiao-Wei Kuo33：
Advanced Benzoxazine Chemistries Provide Improved Performance in Broad Range of Applications / R. Tietze ; M. Chaudhari34：
Benzoxazines for Industrial Applications: Comparison with other Resins, Formulation & Toughening Know-how and Water-based Dispersion Technology / C. Sawaryn ; S. Kreiling ; R. Schoenfeld ; K. Landfester ; A. Taden35：
Polybenzoxazines for increased dielectric constant / H. Manuspia36：
Preparation of Polybenzoxazine- Ni- Zn Ferrite nanocomposites and their magnetic property / N.N. Ghosh ; A.B. Rajput37：
Material Properties and Spectra / Part X：
1H NMR spectra of benzoxazine resins / 38：
FTIR spectra of benzoxazine resins / 39：
Raman spectra of benzoxazine resins / 40：
DSC thermograms of benzoxazine resins / 41：
TGA thermograms of benzoxazine resins / 42：
Dynamic mechanical spectra of benzoxazine resins / 43：
Preface
Introduction / Part I：
Overview and historical background of polybenzoxazine research / H. Ishida1：
15.

電子ブック
ＥＢ
15. Monomers, polymers and composites from renewable resources
Belgacem, Mohamed Naceur Belgacem, Alessandro Gandini, Alessandro Gandini, Mohamed Naceur ;Gandini,Alessandro Belgacem
出版情報: Elsevier ScienceDirect Books Complete , Elsevier, 2008
所蔵情報: loading…
目次情報: 続きを見る
Foreword
List of Contributors
The State of the Art / Alessandro Gandini ; Mohamed Naceur Belgacem1：
Terpenes: Major Sources, Properties and Applications / Armando J.D. Silvestre2：
Materials from Vegetable Oils: Major Sources, Properties and Applications / 3：
Rosin: Major Sources, Properties and Applications / 4：
Sugars as Monomers / J.A. Galbis ; M.G. Garcia Martin5：
Furan Derivatives and Furan Chemistry at the Service of Macromolecular Materials / 6：
Surfactants from Renewable Sources: Synthesis and Applications / Thierry Benvegnu ; Daniel Plusquellec ; Loic Lemiegre7：
Tannins: Major Sources, Properties and Applications / Antonio Pizzi8：
Lignins: Major Sources, Structure and Properties / Goran Gellerstedt ; Gunnar Henriksson9：
Industrial Commercial Lignins: Sources, Properties and Applications / Jairo Lora10：
Lignins as Components of Macromolecular Materials / 11：
Partial or Total Oxypropylation of Natural Polymers and the Use of the Ensuing Materials as Composites or Polyol Macromonomers / 12：
Hemicelluloses: Major Sources, Properties and Applications / Iuliana Spiridon ; Valentin I. Popa13：
Cork and Suberins: Major Sources, Properties and Applications / Carlos Pascoal Neto14：
Starch: Major Sources, Properties and Applications as Thermoplastic Materials / Antonio J.F. Carvalho15：
Cellulose Chemistry: Novel Products and Synthesis Paths / Thomas Heinze ; Katrin Petzold16：
Bacterial Cellulose from Glucanacetobacter xylinus: Preparation, Properties and Applications / Edison Pecoraro ; Danilo Manzani ; Younes Messaddeq ; Sidney J.L. Ribeiro17：
Surface Modification of Cellulose Fibres / 18：
Cellulose-Based Composites and Nanocomposites / Alain Dufresne19：
Chemical Modification of Wood / 20：
Polylactic Acid: Synthesis, Properties and Applications / L. Averous21：
Polyhydroxyalkanoates: Origin, Properties and Applications / Ivan Chodak22：
Proteins as Sources of Materials / Lina Zhang ; Ming Zeng23：
Polyelectrolytes Derived from Natural Polysaccharides / Marguerite Rinaudo24：
Chitin and Chitosan: Major Sources, Properties and Applications / C. Peniche ; W. Arguelles-Monal ; F.M. Goycoolea25：
Index
Foreword
List of Contributors
The State of the Art / Alessandro Gandini ; Mohamed Naceur Belgacem1：
16.

電子ブック
ＥＢ
16. Properties of Polymers : Their Correlation with Chemical Structure; their Numerical Estimation and Prediction from Additive Group Contributions
Dirk Willem Krevelen, K. te Nijenhuis, Klaas te Nijenhuis, D.W van Krevelen, Klaas te Nijenhuis, Klaas te Nijenhuis, Van Krevelen W
出版情報: Elsevier ScienceDirect Books Complete , Elsevier, 2009
所蔵情報: loading…
17.

電子ブック
ＥＢ
17. Applied Plastics Engineering Handbook : Processing and Materials
Myer Kutz (ed), Kutz Myer
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2011
所蔵情報: loading…
目次情報: 続きを見る
Plastics Engineering: Basic Fundamentals (7 chapters) / Part I：
Introduction to Plastics Engineering (sections 1-4 and 6-8 of old Chapter 22 The Plastics Industry)
Electrical Properties
Mechanical Properties
Testing of Plastics
Testing and Instrumental Analysis for the plastics processing industry: key technologies
Plastics Processing (sections 5 of old Chapter 22 The Plastics Industry)
Additives for Plastics
Plastics Engineering: New Developments / Part II：
Plastics Materials (9 chapters)
Engineering Thermoplastics
Thermoplastic Elastomers and Their Applications
Thermoset Elastomers
Fluoropolymers
Nanocomposites: preparation, structure, properties
Polyolefins
Polyvinyl Chloride (PVC)
Biodegradable Plastics
Polymeric Biomaterials
Additives (7 chapters)
Adhesion Promotion
Coatings and Colorant Processing Fundamentals (two chapters combined)
Dispersants and Coupling Agents
Functional Fillers for Plastics
Flame Retardants
Pasticizers
Polymer Stabilization
Processes (11 chapters)
Blow Molding
Chaotic advection and its application for forming structured plastic materials
Chemical Mechanical Polishing: Role of Polymeric Additives and Composite Materials
Compression Molding
Extrusion
Injection Molding
Microcellular Processing
Rotational Molding
Thermoforming
Process Monitoring & Control
Recycling of Plastics
Applications (6 chapters)
Design of Plastic Parts
Plastics in Building and Construction
Fiber Reinforced Polymer Composites Applications
Plastic Piping Materials
Polyethylene Terephthalate (PET) Bottles
Tissue Engineering Scaffolds Fabrication
Plastics Engineering: Basic Fundamentals (7 chapters) / Part I：
Introduction to Plastics Engineering (sections 1-4 and 6-8 of old Chapter 22 The Plastics Industry)
Electrical Properties
18.

電子ブック
ＥＢ
18. Polylactic Acid
Lee Tin Sin, W. A. W. A. Rahman, Wan A. W. A. Rahman, Wan Aizan Wan Abdul Rahman, A. R. Rahmat, Abdul R. Rahmat, Abdul Razak Rahmat, Plastics Design Library, Rahmat Abdul
出版情報: Elsevier ScienceDirect Books Complete , Norwich : William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Initial Glance over Polylactic acid / Chapter 1：
Synthesis and Production of Polylactic Acid / Chapter 2：
Thermal Properties of Polylactic acid / Chapter 3：
Chemical Properties of Polylactic acid / Chapter 4：
Mechanical Properties of Polylactic Acid / Chapter 5：
Rheology Properties of Polylactic Acid / Chapter 6：
Degradation and Stability of Polylactic Acid / Chapter 7：
Applications of Polylactic Acid / Chapter 8：
Initial Glance over Polylactic acid / Chapter 1：
Synthesis and Production of Polylactic Acid / Chapter 2：
Thermal Properties of Polylactic acid / Chapter 3：
19.

電子ブック
ＥＢ
19. Film Properties of Plastics and Elastomers (Third Edition)
Laurence W. McKeen, Plastics Design Library.
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2012
所蔵情報: loading…
目次情報: 続きを見る
Preface
Introduction to Plastics and Polymers / 1：
Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers / 2：
Production of films / 3：
Markets and Applications for films / 4：
Styrenic Plastics / 5：
Polyesters / 6：
Polyamides (Nylons) / 8：
Polyolefins / 9：
Polyvinyls & Acrylics / 10：
Fluoropolymers / 11：
High Temperature/High Performance Polymers / 12：
Elastomers and rubbers / 13：
Renewable Resource or biodegradable polymers / 14：
Appendices
Permeation Unit Conversion Factors
Vapor Transmission rate Conversion factors
Indices
Preface
Introduction to Plastics and Polymers / 1：
Introduction to the Mechanical, Thermal and Permeation Properties of Plastics and Elastomers / 2：
20.

電子ブック
ＥＢ
20. Handbook of Molded Part Shrinkage and Warpage
Jerry M. Fischer, Jerry Fischer
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Introduction to Plastics Processing
Shrinkage and Warpage / 2：
Causes of Molded-Part Variation: Part Design / 3：
Causes of Molded-Part Variation: Material / 4：
Causes of Molded-Part Variation: Mold Design / 5：
Causes of Molded-Part Variation: Processing / 6：
Factors Affecting Post-Mold Shrinkage and Warpage / 7：
Controlling Mold and Post-Mold Shrinkage and Warpage / 8：
Computer-Aided Analysis / 9：
Case Studies / 10：
Data / 11：
Conversion Factors and Equivalents / Appendix A：
Abbreviations, Acronyms and Material Names / Appendix B：
Glossary
Introduction to Plastics Processing
Shrinkage and Warpage / 2：
Causes of Molded-Part Variation: Part Design / 3：
21.

電子ブック
ＥＢ
21. Surface Preparation Techniques for Adhesive Bonding (Second Edition)
Raymond F. Wegman, James van Twisk, James Van Twisk
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Introduction / 1：
Aluminum and Aluminum Alloys / 2：
Titanium and Titanium Alloys / 3：
Steel and Stainless Steel / 4：
Copper and Copper Alloys / 5：
Magnesium / 6：
Other Metals / 7：
Plastics / 8：
Rubbers / 9：
Utilizing Openair“ Plasma for / 10：
Better Adhesion
Introduction / 1：
Aluminum and Aluminum Alloys / 2：
Titanium and Titanium Alloys / 3：
22.

電子ブック
ＥＢ
22. Reactive Polymers Fundamentals and Applications : A Concise Guide to Industrial Polymers
Johannes Karl Fink
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Unsaturated Polyester Resins / 1：
Polyurethanes / 2：
Epoxy Resins / 3：
Phenol/formaldehyde Resins / 4：
Urea/formaldehyde Resins / 5：
Melamine Resins / 6：
Furan Resins / 7：
Silicones / 8：
Acrylic Resins / 9：
Cyanate Ester Resins / 10：
Bismaleimide Resins / 11：
Terpene Resins / 12：
Cyanoacrylates / 13：
Benzocyclobutene Resins / 14：
Reactive Extrusion / 15：
Compatibilization / 16：
Rheology Control / 17：
Grafting / 18：
Acrylic Dental Fillers / 19：
Toners / 20：
Unsaturated Polyester Resins / 1：
Polyurethanes / 2：
Epoxy Resins / 3：
23.

電子ブック
ＥＢ
23. Thermoplastics and Thermoplastic Composites
Michel Biron, Odile Marichal
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2013
所蔵情報: loading…
24.

電子ブック
ＥＢ
24. Creep and fatigue in polymer matrix composites
R.M Guedes, Rui Miranda Guedes
出版情報: Elsevier ScienceDirect Books Complete , Woodhead Publishing, 2011
所蔵情報: loading…
目次情報: 続きを見る
Contributor contact details
Viscoelastic and viscoplastic modeling / Part I：
Viscoelastic constitutive modeling of creep and stress relaxation in polymers and polymer matrix composites / G. C. Papanicolaou ; S. P. Zaoutsos1：
Introduction / 1.1：
Creep / 1.2：
Linearity / 1.3：
The time-temperature superposition principle (TTSP) / 1.4：
The time-stress superposition principle (TSSP) / 1.5：
The time-temperature-stress superposition principle (TTSSP) / 1.6：
Linear viscoelastic models / 1.7：
Nonlinear viscoelastic behavior / 1.8：
References / 1.9：
Time-temperature-age superposition principle for predicting long-term response of linear viscoelastic materials / E. J. Barbero2：
Correlation of short-term data / 2.1：
Time-temperature superposition / 2.2：
Time-age superposition / 2.3：
Effective time theory / 2.4：
Summary / 2.5：
Temperature compensation / 2.6：
Conclusions / 2.7：
Time-dependent behavior of active/intelligent polymer matrix composites incorporating piezoceramic fibers / K. A. Li ; A. Muliana2.8：
Linearized time-dependent model for materials with electromechanical coupling / 3.1：
Simplified micromechanical model of homogenized active polymer matrix composites (PMCs) / 3.3：
FE models of representative volume elements (RVEs) of the active PMCs / 3.4：
Effective electromechanical and piezoelectric properties / 3.5：
Applications of active PMCs as actuators / 3.6：
Acknowledgement / 3.7：
Predicting the elastic-viscoplastic and creep behaviour of polymer matrix composites using the homogenization theory / T. Matsuda ; N. Ohno3.9：
Homogenization theory for non-linear time-dependent composites / 4.1：
Elastic-viscoplastic analysis of CFRP laminates and experimental verification / 4.3：
Elastic-viscoplastic analysis of plain-woven GFRP laminates and experimental verification / 4.4：
Creep analysis of unidirectional CFRP laminates at elevated temperature / 4.5：
Measuring fiber strain and creep behavior in polymer matrix composites using Raman spectroscopy / T. Miyake4.6：
Introduction: creep mechanism of composites reinforced unidirectionally with long fibers / 5.1：
Stress or strain measurement by Raman spectroscopy / 5.2：
Experiments on stress relaxation in broken fibers / 5.3：
Time-dependent variation in fiber stress during pull-out tests / 5.4：
Discussion / 5.5：
Predicting the viscoelastic behavior of polymer nanocomposites / A. Beyle ; C. C. Ibeh5.6：
Specific features of nanoparticles and nanocomposites / 6.1：
Viscoelasticity of polymer matrix / 6.2：
Viscoelasticity of polymers filled by quasi-spherical nanoparticles / 6.3：
Viscoelasticity of polymers filled by platelet-shape nanoparticles / 6.4：
Viscoelasticity of polymers filled by nanofibers / 6.5：
Viscoelasticity of polymers filled by buckyballs and nanotubes / 6.6：
Viscoelasticity of nanoporous polymers / 6.7：
Viscoelasticity of fibrous composites with nano-filled matrices / 6.8：
Concluding remarks / 6.9：
Notation / 6.10：
Constitutive modeling of viscoplastic deformation of polymer matrix composites / M. Kawai6.11：
Framework for constitutive modeling of the viscoplastic deformation of anisotropic materials / 7.1：
Modeling of tension-compression asymmetry in initial anisotrapy / 7.3：
Modeling of transient creep softening due to stress variation / 7.4：
Future trends / 7.5：
Acknowledgements / 7.7：
Creep analysis of polymer matrix composites using viscoplastic models / E. Kontou7.8：
Viscoplastic creep modeling for polymer composites / 8.1：
Micromechanical modeling of viscoelastic behavior of polymer matrix composites undergoing large deformations / J. Aboudi8.3：
Finite strain viscoelasticity coupled with damage model of monolithic materials / 9.1：
Finite strain micromechanical analysis / 9.3：
Computational procedure / 9.4：
Applications / 9.5：
Creep rupture / 9.6：
Fibre bundle models for creep rupture analysis of polymer matrix composites / F. Kun10：
Fibre bundle model / 10.1：
Fibre bundle models for creep rupture / 10.3：
Summary and outlook / 10.4：
Micromechanical modeling of time-dependent failure in off-axis polymer matrix composites / J. Koyanagi10.5：
Experiments / 11.1：
Finite element analysis / 11.3：
Conclusion / 11.4：
Time-dependent failure criteria for lifetime prediction of polymer matrix composite structures / R. M. Guedes11.6：
Energy-based failure criteria / 12.1：
Creep rupture based on simple micromechanical models / 12.3：
Experimental cases / 12.4：
The Crochet model (time-dependent yielding model) / 12.5：
Kinetic rate theory / 12.6：
Fracture mechanics extended to viscoelastic materials / 12.7：
Continuum damage mechanics / 12.8：
Damage accumulation models for static (creep) and dynamic fatigue / 12.9：
Fatigue modeling, characterization and monitoring / 12.10：
Testing the fatigue strength of fibers used in fiber-reinforced composites using fiber bundle tests / P. K. Mallick13：
Determination of fiber strength distribution parameters / 13.1：
Fiber bundle model for fatigue / 13.3：
Stress-life diagram of fiber bundles / 13.4：
Continuum damage mechanical modeling of creep damage and fatigue in polymer matrix composites / D. Perreux ; F. Thiebaud13.5：
Mesomodel: viscoelastic strain, damage and viscoplastic strain of a layer / 14.1：
From meso-to macroscopic behavior / 14.3：
Accelerated testing methodology for predicting long-term creep and fatigue in polymer matrix composites / M. Nakada14.4：
Accelerated testing methodology / 15.1：
Experimental verification for ATM / 15.3：
Applicability of ATM / 15.4：
Theoretical verification of ATM / 15.5：
Future trends and research / 15.6：
Fatigue testing methods for polymer matrix composites / W. Van Paepegem15.7：
Fatigue testing methods / 16.1：
Effect of boundary conditions and specimen geometry / 16.3：
Typical fatigue damage in structural composites / 16.4：
Sources of further information and advice / 16.5：
The effect of viscoelasticity on fatigue behaviour of polymer matrix composites / J. A. Epaarachchi16.7：
Linear viscoelastic analysis of the characteristics of viscoelastic materials under static and dynamic loading / 17.1：
Fatigue behaviour of composite materials / 17.3：
Characterization of vicoelasticity, viscoplasticity and damage in composites / J. Varna17.4：
Material model / 18.1：
Microdamage effect on stiffness / 18.3：
Viscoplasticity / 18.4：
Nonlinear viscoelasticity / 18.5：
Appendix: time-dependence of VP-strain in a creep test / 18.6：
Structural health monitoring of composite structures for durability / S. Alampalli19：
FRP structures in the bridge industry / 19.1：
Structural health monitoring / 19.3：
FRP structures and SHM / 19.4：
Case studies / 19.5：
Index / 19.6：
Contributor contact details
Viscoelastic and viscoplastic modeling / Part I：
Viscoelastic constitutive modeling of creep and stress relaxation in polymers and polymer matrix composites / G. C. Papanicolaou ; S. P. Zaoutsos1：
25.

電子ブック
ＥＢ
25. Handbook of Plasticizers
George Wypych, George Wypych
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2012
所蔵情報: loading…
目次情報: 続きを見る
Introduction / 1：
Plasticizer Types / 2：
Typical Methods of Quality Control of Plasticizers / 3：
Transportation and Storage / 4：
Mechanisms of Plasticizers Action / 5：
Theories of Compatibility / 6：
Plasticizer Motion and Diffusion / 7：
Effect of Plasticizers on Other Components of Formulation / 8：
Plasticization Steps / 9：
Effect of Plasticizers on Properties of Plasticized Materials / 10：
Plasticizers Use and Selection for Specific Polymers / 11：
Plasticizers in Polymer Blends / 12：
Plasticizers in Various Industrial Products / 13：
Plasticizers in Various Processing Methods / 14：
Specialized Analytical Methods in Plasticizer Testing / 15：
Mathematical Modelling in Application To Plasticizers / 16：
Health and Safety Issues With Plasticizers and Plasticized Materials / 17：
The Environmental Fate of Plasticizers / 18：
Regulations and Data / 19：
Personal Protection / 20：
Plasticizer Recovery & Recycling / 21：
Index
Introduction / 1：
Plasticizer Types / 2：
Typical Methods of Quality Control of Plasticizers / 3：
26.

電子ブック
ＥＢ
26. Handbook of Environmental Degradation of Materials
Myer Kutz
出版情報: Elsevier ScienceDirect Books Complete , William Andrew Publishing, 2013
所蔵情報: loading…
目次情報: 続きを見る
Analysis / Part I：
Analysis of Failures of Metallic Materials due to Environmental Factors / 1：
Laboratory Assessment of Corrosion / 2：
Modeling of Corrosion Processes / 3：
Lifetime Predictions / 4：
Types of Degradation / Part II：
Electrochemical Corrosion / 5：
Localized Corrosion / 6：
High-Temperature Oxidation / 7：
Weathering of Plastics / 8：
Chemical and Physical Aging of Polymers / 9：
Thermal Degradation of Plastics / 10：
Environmental Degradation of Reinforced Concrete / 11：
Biofouling and prevention, and biodeterioration and biodegradation of materials (possibly split into two chapters, one on polymers, one on metals.) / 12：
Material Flammability / 13：
Fire Retardant Materials / 14：
Protective Measures / Part III：
Cathodic Protection / 15：
Thermal Protective Clothing / 16：
Wood Protection / 17：
Materials Selection for Environmental Degradation Prevention / 18：
Surface Engineering / Part IV：
The Intersection of Design, Manufacturing, and Surface Engineering (updated to include new coatings: (biomimetic, nanostructured and conductive polymers) / 19：
Nanostructured Surfaces and Nanomaterial Coatings / 20：
Protective Coatings for Aluminum Alloys / 21：
Anti-Corrosion Paints / 22：
Thermal and Environmental Barrier Coatings / 23：
Thermay Spray Coatings / 24：
Paint Weathering Tests / 25：
Coatings for Concrete Surfaces: Testing and Modeling / 26：
The importance of intrinsic defects in the protective behavior of coatings / 27：
Plastics Additives for Environmental Stability / 28：
Industrial Applications / Part V：
Degradation of Spacecraft Materials / 29：
Cathodic Protection for Pipelines / 30：
Tanker Corrosion / 31：
Barrier Packaging Materials / 32：
Corrosion prevention and control programs for chemical processing equipment / 33：
Analysis / Part I：
Analysis of Failures of Metallic Materials due to Environmental Factors / 1：
Laboratory Assessment of Corrosion / 2：
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼