close
1.

図書
図書
1. Reliability, stress analysis, and failure prevention aspects of adhesive and bolted joints, rubber components, composite springs : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  v, 159 p. ; 28 cm
シリーズ名: DE ; vol. 100
所蔵情報: loading…
目次情報: 続きを見る
Non-Linear Finite Element Analysis Support Testing for Gaskets and Seals / Abraham Pannikottu ; Joseph A. Seiler ; Jerry J. Leyden
Performance Prediction of Elastomeric Gasket Materials by Compression Stress Relaxation / Robert Samples ; Stanley J. Sadon
A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections / Erol Sancaktar ; Kiran Narayan
Free Vibration Behavior of Unidirectional Composite Cylindrical Helical Springs With Circular Section / Vebil Yildirim
Free Vibration of Symmetric Cross-Ply Laminated Cylindrical Helical Springs / Erhan Kiral
Stress Analysis and Strength of Bonded Shrink Fitted Joint of Hollow Shafts Subjected to Torsional Load: The Effect of Bonded Shrink Fitted Position / Masahiro Yoneno ; Toshiyuki Sawa ; Takeshi Nakamura
Stress Analysis and Strength Evaluation of Single-Lap Band Adhesive Joints Subjected to External Bending Moments / Jiemin Liu
Elastoplastic FEM Stress Analysis and Strength Evaluation of Adhesive Tapered Lap Joints of Hollow Shafts Subjected to Tensile Loads / Masataka Kawawaki ; Yuichi Nakano
The Damping Characteristics of Machine Structures Assembled by Bonding: A Beam in Which Two Steel Strips Are Partially Joined by an Adhesive / Takashi Kobayashi
A Study on the Effects of Surface Roughness on the Strength of Single Lap Joints / Rajesh Gomatam
Stress Analysis of Bolted Circular Flanged Joints With Tap Bolts / Tsuneshi Morohoshi
Stress Analysis of Bolted Joints With Plain Washers / Hajime Yasui
Effect of Interface Configuration on the Mechanical Behaviors of Bolted Joints / Atsushi Kudo
Mechanical Behavior of Bolted Joints Under Thermal Changes / Akira Muramatsu ; Hiroyuki Kumano
Proper Selection of Auxiliary Heat Source for Reducing Thermal Residual Stresses During Welding Process / Raghu Ram Kunde ; Padmalakshmi V. Kuppa ; Shahriar Jahanian
Author Index
Non-Linear Finite Element Analysis Support Testing for Gaskets and Seals / Abraham Pannikottu ; Joseph A. Seiler ; Jerry J. Leyden
Performance Prediction of Elastomeric Gasket Materials by Compression Stress Relaxation / Robert Samples ; Stanley J. Sadon
A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections / Erol Sancaktar ; Kiran Narayan
2.

図書
図書
2. Applications of design for manufacturing : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME, the Manufacturing Engineering Division, ASME ; edited by Samir B. Billatos, Byoung Sung Kim
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  v, 93 p. ; 28 cm
シリーズ名: DE ; vol. 99
MED ; vol. 7
所蔵情報: loading…
目次情報: 続きを見る
Designing Machine Tools to Minimize Life Cycle Cost / Michael F. Carter
An Attachment Level Design Process for Snap-Fit Applications / Paul R. Bonenberger
Inputs for Successful Target Costing / Brad Clifton ; Wes Townsend
Design for Quality Approach to Improve Surface Roughness in Milling Operations / G. Abdou ; N. A. Basaly
Process Improvement Using Assembly Analysis Method / Devdas Shetty ; Claudio Campana ; Jun Kondo
Process Quality in Rapid Manufacturing / Franz-Josef Kahlen ; Aravinda Kar
Design of Experiments Procedure to Optimize Feedrate in Wire Electrical Discharge Machining / Samir B. Billatos ; Gregory M. Ricci
Design Optimization of Rolling Element Bearings / Wen Fu ; John H. Rhodes ; Bruce R. Good ; Jian (John) Dong
Design of a Computer-Aided Modeling System: A Case Study / John Lotko III ; Zbigniew M. Bzymek ; Richard E. Garrett
Author Index
Designing Machine Tools to Minimize Life Cycle Cost / Michael F. Carter
An Attachment Level Design Process for Snap-Fit Applications / Paul R. Bonenberger
Inputs for Successful Target Costing / Brad Clifton ; Wes Townsend
3.

図書
図書
3. Vibration and noise control : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME, the Dynamic Systems and Control Division, ASME ; edited by H.S. Tzou, Reza Kashani, William W. Clark
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  vi, 209 p. ; 28 cm
シリーズ名: DE ; vol. 97
DSC ; vol. 65
所蔵情報: loading…
4.

図書
図書
4. Dynamics, acoustics, and simulations : presented at the 1998 ASME International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California
sponsored by the Design Engineering Division, ASME ; edited by Ray P.S. Han, K.H. Lee, Alberto C.J. Luo, editors
出版情報: New York : American Society of Mechanical Engineers, c1998  vi, 269 p. ; 28 cm
シリーズ名: DE ; vol. 98
所蔵情報: loading…
5.

図書
図書
5. Active/passive vibration control and nonlinear dynamics of structures : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas
sponsored by the Design Engineering Division, ASME, the Applied Mechanics Division, ASME ; edited by W.W. Clark ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 218 p. ; 28 cm
シリーズ名: DE ; vol. 95
AMD ; vol. 223
所蔵情報: loading…
目次情報:
Vibration control via active/passive damping methods
Nonlinear dynamics and stochastic mechanics
Vibration control via active/passive damping methods
Nonlinear dynamics and stochastic mechanics
6.

図書
図書
6. Concurrent product design and environmentally conscious manufacturing : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas
sponsored by the Design Engineering Division, ASME, the Manufacturing Engineering Division, ASME ; edited by Samir B. Billatos, Hong C. Zhang
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 295 p. ; 26 cm
シリーズ名: DE ; vol. 94
MED ; vol. 5
所蔵情報: loading…
7.

図書
図書
7. Reliability, stress analysis, and failure prevention issues in adhesively bonded and bolted joints, composites design : presented at the 1997 ASME International Mechanical Engineering Congress and Exposition, November 16-21, 1997, Dallas, Texas
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  v, 131 p. ; 28 cm
シリーズ名: DE ; vol. 96
所蔵情報: loading…
8.

図書
図書
8. Reliability, stress analysis, and failure prevention issues in emerging technologies and materials : presented at the 1995 ASME International Mechanical Engineering Congress and Exposition, November 12-17, 1995, San Francisco, California
sponsored by the Design Engineering Division, ASME ; edited by Erol Sancaktar
出版情報: New York : American Society of Mechanical Engineers, c1995  v, 117 p. ; 28 cm
シリーズ名: DE ; vol. 87
所蔵情報: loading…
9.

雑誌
雑誌
9. Proceedings of the ASME Design Engineering Division
American Society of Mechanical Engineers. Design Engineering Division ; International Mechanical Engineering Congress and Exposition
出版情報: New York, N.Y. : American Society of Mechanical Engineers  v. ; 28 cm
所蔵情報: loading…
10.

図書
図書
10. Vibration and control of mechanical systems : presented at the 2001 ASME International Mechanical Engineering Congress and Exposition, November 11-16, 2001, New York, New York
sponsored by The Design Engineering Division, ASME ; edited by H.R. Hamidzadeh, H. Rahnejat, Albert C.J. Luo
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vii, 395 p. ; 28 cm
シリーズ名: DE ; v. 111
所蔵情報: loading…
目次情報: 続きを見る
Vibration of Elastic Continuum With Stochastically Varying Surface Roughness Carrying an Accelerating Oscillator / Christian A. Schenk ; Lawrence A. Bergman
Feasibility of Using an Active Actuator for Two-Dimensional Vibration Abatement in a Turning Process / W. Y. Yan ; A. M. Al-Jumaily
The Modeling of Mechatronic Servo Systems and Vibration Control / Junzhong Zou ; Zhongliang Jing ; Masatoshi Nakamura ; Albert C. J. Luo
Modeling of Friction Induced Vibration due to Third-Body Effects / David S. Xu ; Hooshang Heshmat
Dynamic Analysis of Semi-Active Tuned Vibration Absorbers Using Closed-Form Equivalent Models / Jeong-Hoi Koo ; Mehdi Ahmadian
Model Based Control of a Smart Vibrating Cantilever Beam / Robin G. Scott ; Michael D. Brown ; Warren J. Manning ; Martin C. Levesley
A New Approach for Dynamical Stable Criterion of Hot Strip Mills / Mitsuhiro Yoshida ; Hideaki Furumoto ; Masashi Yoshikawa ; Shigeki Morii
A Systematic Approach for Machining Process Improvement / Brij B. Seth ; Youssef A. Hamidieh ; Balachandra Muniyappa
Study of Automotive Hydromotive Hydrobushing in Off-Axis Vibration / Min Lu ; Judah Ari-Gur ; John Garety
Simulation of Roll Grinding System Dynamics With Rotation Speed Control / LiHong Yuan ; Veli-Matti Jarvenpaa ; Erno Keskinen ; Michel Cotsaftis
Constrained Multi-Body Dynamic Analysis of Shaft and Bearing Systems / F. Hoffmann ; H. Rahnejat
Multi-Body Contact Dynamics Modeling of Roll Mechanisms in Paper Manufacturing Systems / Sirpa Launis ; Juha-Matti Kivinen
The Generalized Shooting Arc-Length Method for Periodic Solutions and the Corresponding Periods of Nonlinear Dynamical Systems / Dexin Li ; Jianxue Xu
Nonlinear Dynamics Analysis of a Printed Wiring Board With Simple and Clamped Boundary Conditions / Xiaoling He
Combination Resonance of a Magnet Over a High-T[subscript c] Superconductor Excited Vertically / Toshihiko Sugiura ; Masayuki Kondo
Analysis on an Oscillator With Delayed Feedback Near Double Hopf Bifurcations / P. Yu ; Y. Yuan
A Multi-Mode Approach for the Nonlinear Vibrations of Circular Cylindrical Shells / Francesco Pellicano ; Marco Amabili ; Michael P. Paidoussis
Nonlinear Vibration Periodicity Analysis of Timoshenko Beams Under Harmonic Base Excitation / Nader Jalili ; Ebrahim Esmailzadeh
Induced Vibration of Suspension Bridges Traversed by Moving Vehicles
Dynamic Interaction of a Moving Oscillator With an Elastically Supported Continuum / Yonghong Chen ; Chin An Tan
Experiments on the Active Control of Circular Disk Vibration / J. B. Qiu ; X. Q. Huang ; D. Q. Wang
In-Plane Free Vibrations of the Double-Segment Compound Rotating Disks / Hamid R. Hamidzadeh ; Reza U. Karim
Crack Influences on the Vibration, Buckling, and Parametric Instability of Plates / Abolhassan Vafai ; Mahyar Javidruzi ; Homayoon E. Estekanchi
Vibration of Free-Free Two Member Open Frames With End and Elbow Masses / G. R. Heppler ; D. C. D. Oguamanam ; J. S. Hansen
Estimation of Chaotic Parameter Regimes via Generalized Competitive Modes Approach / Weiguang Yao ; Pei Yu ; Chris Essex
On a Chaos Control for the Logistic Map / Xiaohua Wang
The Bifurcation Behaviors for a 5D Magnetic Levitation Control System / Hong Yao ; Jian-Xue Xu
Robust Stability and Dynamic Analysis of a Special Type of Floating Offshore Structure / E. Esmailzadeh ; A. Goodarzi
Nonlinear Supersonic Flutter of Imperfect Circular Cylindrical Shells / M. Amabili ; F. Pellicano
Dynamics of a Nonlinear Mechanical Resonator in Micro-Electro-Mechanical Systems / F. Y. Wang
On the Suppression of Flow-Induced Vibration With a Simple Control Algorithm / Pablo Carbonell ; Xiaodong Wang ; Zhong-Ping Jiang
The Pressure Field Around a Vibrating Cylinder in a Fluid Annulus / Robert R. Reynolds ; Jack H. Cole ; Zhen Yuan
Direct Perturbation Analysis on Transmission Lines With Detuning Pendulums / Kelin Pan
Asymmetrically Respiratory System Simulation for Identifying Airway Occlusion / Y. Al-Fakhri
Elasto-Multi-Body Dynamics of Multi-Cylinder Internal Combustion Engine / S. Gupta ; P. Kelly
Air Velocity Regulation in a Wind Tunnel / M. Ebrahimi ; R. Whalley
Vibration Analysis of Multifunctional Satellite Structure / H. Nayeb-Hashemi ; A. Vaziri
Evaluation of Bond Strength With Void Subjected to Harmonic Peeling Loads / H. R. Hamidzadeh
Enhancement for Frequency Domain Based Tool Breakage Detection System / Raghunandan Sridhara
Development of an Innovative Space Boom / Michael C. Lou ; Houfei Fang ; Ben Yang ; Nathaniel Lee Palmer
A Study on the Effect of Preview Uncertainties in Preview Control of Vehicle Suspensions / Ardalan Vahidi ; Azim Eskandarian
4WID: A New Concept in Electrical Vehicles / G. R. Vossoughi
On Axisymmetric Vibration of Annular Plate of Parabolic Thickness Variation by Factorization of Differential Equation / Dumitru I. Caruntu
Inverse Dynamics of a Planar Flexible-Link Manipulator With Revolute-Prismatic Joints / M. Farid ; I. Salimi
Simplified FEM Model of Paper Machine Roll for Multibody Rolling Contact Analyses / Erno K. Keskinen
Age Effect Investigation on Postural Dynamic Responses of Human Body / Maryam Hoviattalab
A Solution for the Interior Sound Field With a Nonuniform Temperature Distribution in the Vehicle Passenger Room / Jiuhui Wu ; Hualing Chen
Structural Sound Radiation on a Reflecting Plane by the Boundary Point Method / Z. Cui
On the Hamiltonian Formulation of Thin Free Liquid Sheets / Zhi Li
The Vibration Control of a Flexible Mechanism With Impact / Chunmei Jin ; Yang Qiu ; Ling Fan
Dynamic Analysis of a Slider-Crank Mechanism With Flexible Connecting Rod and Viscous Friction / Jinfu Zhang ; Qinyu Xu ; Ling Zhang
Author Index
Vibration of Elastic Continuum With Stochastically Varying Surface Roughness Carrying an Accelerating Oscillator / Christian A. Schenk ; Lawrence A. Bergman
Feasibility of Using an Active Actuator for Two-Dimensional Vibration Abatement in a Turning Process / W. Y. Yan ; A. M. Al-Jumaily
The Modeling of Mechatronic Servo Systems and Vibration Control / Junzhong Zou ; Zhongliang Jing ; Masatoshi Nakamura ; Albert C. J. Luo
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼