close
1.

図書

図書
sponsored by the Materials Division, ASME ; edited by Jagannathan Sankar, Devdas Pai
出版情報: New York, N.Y. : American Sciety of Mechanical Engineers, c2001  v, 81 p. ; 28 cm
シリーズ名: MD ; v. 95
所蔵情報: loading…
目次情報: 続きを見る
Structural Ceramics
Combustion Chemical Vapor Deposition of YSZ Thin Films for Fuel Cell Applications / Zhigang Xu ; Jag Sankar ; Q. Wei
Minimization of Stress at Metal-Ceramic Interfaces Using Functionally Graded Materials / Hugh A. Bruck ; Harishbabu Surendranath
Understanding the Effects of Processing on the Mechanical Behavior of a Si3N4 Ceramic Through Microstructural Investigations / J. Sankar
Characterization of Ceramic Components Exposed in Industrial Gas Turbines / M. K. Ferber ; H.-T. Lin
Diamond and Diamondlike Composites / R. J. Narayan ; J. Narayan
Electronic Ceramics
Tunable Magnetic and Mechanical Properties in Metal Ceramic Composite Thin Films / D. Kumar ; A. Kvit
Mechanical Properties of Novel Nanocrystalline Materials / H. Wang
Processing, Understanding, and Application of Piezoelectric Materials for an Artificial Neural System / M. J. Schulz ; S. Chattopadhyay ; M. J. Sundaresan ; A. Ghoshal ; W. N. Martin ; P. R. Pratap
Nanofunctionalized Phosphor Particles for Advanced Display Applications / Michael Ollinger ; Valentin Craciun ; Rajiv Singh
Author Index
Structural Ceramics
Combustion Chemical Vapor Deposition of YSZ Thin Films for Fuel Cell Applications / Zhigang Xu ; Jag Sankar ; Q. Wei
Minimization of Stress at Metal-Ceramic Interfaces Using Functionally Graded Materials / Hugh A. Bruck ; Harishbabu Surendranath
2.

図書

図書
sponsored by the Applied Mechanics Division ASME, the Materials Division, ASME ; edited by Golam Newaz, Nripen Saha, Omar Faruque
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 127 p. ; 28 cm
シリーズ名: AMD ; v. 250
MD ; v. 96
所蔵情報: loading…
目次情報: 続きを見る
The High Velocity Impact Response of Novel Fiber Metal Laminates / Wesley J. Cantwell ; Graham Wade ; J. Fernando Guillen ; German Reyes-Villanueva Norman Jones ; Paul Compston
Dynamic Mechanical Properties of Fiber-Metal Laminates / Jianjun Liu ; Benjamin Liaw ; Manish Pamwar
The Role of Adhesive in the Load Response of Adhesively Bonded Aluminum Hat Sections Under Axial Compression / Jianping Lu ; Golam M. Newaz ; Ronald F. Gibson
Dynamic Crush Test of Subcomponent Composite Frame Rails / Thomas Brimhall ; Hasetetsion G. Mariam
Crushing Behavior of Braided Composites / Hiroyuki Hamada
Behavior of Composite Materials Under Impact: Strain Rate Effects, Damage, and Plasticity / Serge Abrate
Some Results and Issues in the Non-Destructive Evaluation of Sandwich Composite Structures / Emmanuel O. Ayorinde ; Feizhong Deng
Light Weight Steel Technology Used in a Vehicle Design: Safety CAE Analysis / Jamil M. Alwan ; Chi-Chin Wu ; Thomas H. Sheng ; Chunhui Kevin Li ; Yi Liu
Static and Impact Behavior of Self-Pierced Rivet Connections in Aluminum / Chelliah Madasamy ; Omar Faruque ; Tau Tyan ; Robert Thomas
Studies on Headform Impact Design / Anindya Deb
Stochastic Applications in Crashworthiness / Rama P. Koganti ; Ari G. Caliskan
Influence of Chassis and Driveline Components in Vehicle Frontal Crash / Nripen K. Saha ; Rabin Bhojan
Deployment of Structural Foam in a Vehicle Roof System for Weight Reduction: Analytical/Experimental Verification / Clifford C. Chou
Frontal Impact Test and Analysis on an Aluminum Front-End Structure / Rama Koganti
Global Characterization of Failure Modes Under Impact Loading in Structural Components Made of Low Ductility Materials / Shen Rong Wu ; Xiaoming Chen ; Weiran Hu
Author Index
The High Velocity Impact Response of Novel Fiber Metal Laminates / Wesley J. Cantwell ; Graham Wade ; J. Fernando Guillen ; German Reyes-Villanueva Norman Jones ; Paul Compston
Dynamic Mechanical Properties of Fiber-Metal Laminates / Jianjun Liu ; Benjamin Liaw ; Manish Pamwar
The Role of Adhesive in the Load Response of Adhesively Bonded Aluminum Hat Sections Under Axial Compression / Jianping Lu ; Golam M. Newaz ; Ronald F. Gibson
3.

図書

図書
sponsored by the Materials Division, ASME
出版情報: New York : American Society of Mechanical Engineers, c2002  ix, 382 p. ; 28 cm
シリーズ名: MD ; vol. 97
所蔵情報: loading…
4.

図書

図書
sponsored by the Aerospace Division, ASME [and the] Materials Division, ASME ; edited by James Sirkis, Greg Washington
出版情報: New York : American Society of Mechanical Engineers, c1998  vi, 291 p. ; 28 cm
シリーズ名: AD ; vol. 57
MD ; vol. 83
所蔵情報: loading…
目次情報: 続きを見る
Current and Future Technologies
Some Research Activities and Opportunities in Smart Materials and Structures / Ken P. Chong ; Jorn Larsen-Basse
A Reactive Algorithm for Micro-Robotic Vehicles / Jeffrey L. Dohner
An Intelligent Tool With Adaptive Structure for L-Bending Process of Sheet Metals / Ming Yang ; Ken-ichi Manabe
E/M Impedance Health Monitoring of Spot-Welded Structural Joints / Victor Giurgiutiu ; Anthony Reynolds ; Craig A. Rogers ; Yuh Jin Chao ; Michael A. Sutton
Active Materials
Dielectric Characteristics of a Relaxor 0.9PMN-0.1PT Synthesized With Hot and Cold Pressing / F. Tang ; M. Chinkhota ; W. D. Brown ; J. T. Wang ; K. Lian
Modeling Nonlinearities in Piezoceramics Associated With Polarization Switchings / Yevgeniy Fotinich ; Gregory P. Carman
Performance Comparison of Magnetorheological and Electrorheological Materials in Adaptive Structural Applications / Melek Yalcintas ; Heming Dai
Experimental Results for Magnetostrictive Composites / Terrisa A. Duenas
Actuator Technologies
Development of a Low Frequency High Stroke Proof Mass Actuator With Composite Members / Barry Dunn ; Jeff Paine
Large Displacement Piezoelectric Actuator Configurations / D. Stefan Dancila ; Erian A. Amanios
A Large Stroke, Nanometer Precision X-Y Stage for Lithography / Lowell D. Jones ; Jeffrey S. N. Paine
Analysis and Control of Mesoscale Actuator Systems / Edward Kiely ; Gregory Washington ; Jun-Kyung Song
Structural Control: Basic Research
Dynamic Characterization of Grid Stiffened Composite Panels for Active Structural-Acoustic Control / Kenneth Newbury ; Roger Glaese ; Donald Leo ; Eric Anderson
Control of Random Vibrations of Composite Plates With Piezoelectric Actuators / Yiu-Yin Lee ; Chuh Mei ; Jen-Kuang Huang
The Effect of Model Uncertainty on Magnetorheological Fluid Damper Based Systems Under Feedback Linearization Control / Sameer S. Marathe ; K. W. Wang ; Farhan Gandhi
Comparative Assessment of Optimal Control Methods With Integrated Performance Constraints / Malcolm J. Smith ; T. S. Koko ; I. R. Orisamolu
Enhanced Piezoelectric Shunt Design / Chul H. Park ; Kazuhisa Kabeya ; Daniel J. Inman
Active Vibration Control: Applications
Piezoceramic Active Vibration Suppression System B-1B Flight Demonstration / Charles R. Larson ; Eric Falangas ; Melvin Weiss ; Ratnakar R. Neurgoankar ; Jeffrey G. Nelson ; Joseph S. Rosenthal ; Demetrious G. Zaferis ; Stephen F. McGrath
On the Fluid Dynamics of Adaptive Airfoils / J. D. Jacob
Adaptive Shape Control of Precision Membrane Antennae and Reflectors / C. H. Jenkins ; V. D. Kalanovic ; S. M. Faisal ; K. Padmanabhan ; M. Tampi
Gun Muzzle Control System Using Barrel Mounted Actuator / Chris LaVigna ; Harry Kwatny ; Gilmer Blankenship ; Carole Teolis ; Mike Mattice ; Yaowen Li ; James Sirkis
A Bi-Axial Active Boring Tool for Chatter Mitigation / James M. Redmond ; Patrick S. Barney
Active Control of Crane-Load Vibrations on Ship Vessels / Y.-Y. Li ; B. Balachandran
Control of Flexible Systems
Robust Position Control of Flexible Adaptive Structures With Embedded PZT Actuators / D. G. Wilson ; G. G. Parker ; G. P. Starr ; R. D. Robinett
Shape Control of Deployable Membrane Mirrors / Jeffrey W. Martin ; John A. Main ; George C. Nelson
Analysis of Active Doubly Curved Antenna Structures / Hwan-Sik Yoon
Quantization Effects on Digital Control of Structural Vibration / Jian Sun ; Ali R. Shahin
Health Monitoring
New Maintenance (Inspection) Method for Ground Machines / Koichi Egawa
Vulnerability of Embedded Bragg-Grating Sensors to Impact / Rolf Jarlas ; Klas Levin
Structural Health Monitoring Using Fiber Optic Sensing / Paul Ross ; Peter Chen ; Richard Wagreich ; Steve Chen ; Jim Sirkis
Evaluation of Fiber Optic Sensors for Measuring Strain in Aircraft Applications / Jim Tarter ; Tom Boyer
An Investigation of Delaminated Smart Composite Plates for Damage Detection / Aditi Chattopadhyay ; Dan Dragomir-Daescu ; Chang-ho Nam
Author Index
Current and Future Technologies
Some Research Activities and Opportunities in Smart Materials and Structures / Ken P. Chong ; Jorn Larsen-Basse
A Reactive Algorithm for Micro-Robotic Vehicles / Jeffrey L. Dohner
5.

図書

図書
sponsored by the Applied Mechanics Division, ASME, the Materials Division, ASME ; edited by Richard Perkins
出版情報: New York : American Society of Mechanical Engineers, c1997  v, 139 p. ; 26 cm
シリーズ名: AMD ; vol. 221
MD ; vol. 77
所蔵情報: loading…
6.

図書

図書
sponsored by the Electrical and Electronic Packaging Division, ASME [and] the Materials Division, ASME ; edited by Tien Y. Wu ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 271 p. ; 28 cm
シリーズ名: EEP ; v. 11
MD ; v. 64
所蔵情報: loading…
7.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME [and] the Materials Division, ASME ; edited by Young W. Kwon, Daniel Davis, Howard H. Chung
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 235 p. ; 28 cm
シリーズ名: PVP ; vol. 342
MD ; vol. 72
所蔵情報: loading…
8.

図書

図書
sponsored by the Fluids Engineering Division, ASME, the Materials Division, ASME ; edited by Suresh G. Advani, Dennis A. Siginer
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 261 p. ; 28 cm
シリーズ名: FED ; vol. 243
MD ; vol. 78
所蔵情報: loading…
9.

図書

図書
sponsored by the Fluids Engineering Division, ASME, the Materials Division, ASME ; edited by Dennis A. Siginer, Daniel De Kee
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  vi, 197 p. ; 28 cm
シリーズ名: FED ; vol. 246
MD ; vol. 81
所蔵情報: loading…
10.

図書

図書
sponsored by the Fluids Engineering Division, ASME, the Materials Division, ASME ; edited by Dennis A. Siginer, H.P. Wang
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 285 p. ; 28 cm
シリーズ名: MD ; vol. 66
FED ; vol. 231
所蔵情報: loading…
11.

図書

図書
sponsored by the 1996 International Mechanical Congress and Exposition, November 17-22, 1996, Atlanta, Georgia ; edited by Wen S. Chan ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1996  vi, 513 p. ; 26 cm
シリーズ名: AD ; vol. 51
MD ; vol. 73
所蔵情報: loading…
12.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, the Materials Division, ASME, the Nuclear Engineering Division, ASME ; edited by Young W. Kwon ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 400 p. ; 28 cm
シリーズ名: PVP ; v. 369
所蔵情報: loading…
13.

図書

図書
sponsored by the Aerospace Division, ASME, the Materials Division, ASME, [and] the Design Engineering Division, ASME ; edited by Gregory Washington, James Redmond
出版情報: New York : American Society of Mechanical Engineers, c1999  vii, 411 p. ; 28 cm
シリーズ名: AD ; vol. 59
MD ; vol. 87
所蔵情報: loading…
14.

図書

図書
sponsored by the Applied Mechanics Division, ASME, the Materials Division, ASME, the Materials Division, ASME, the Heat Transfer Division, ASME ; edited by Roy M. Sullivan ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1999  v, 103 p. ; 28 cm
シリーズ名: AMD ; vol. 233
所蔵情報: loading…
15.

図書

図書
sponsored by the Applied Mechanics Division, ASME, the Materials Division, ASME ; edited by Richard Perkins
出版情報: New York : American Society of Mechanical Engineers, c1999  v, 177 p. ; 26 cm
シリーズ名: AMD ; vol. 231
MD ; vol. 85
所蔵情報: loading…
目次情報: 続きを見る
Mesomechanics Analysis of Medium to High Density Paper Sheets / Richard W. Perkins
Random Fiber Networks and Special Orthotropic Elasticity of Paper / M. Ostoja-Starzewski ; D. C. Stahl
Constitutive Models for Paper and Other Ribbon-Like Nonwovens: A Literature Review / M. K. Ramasubramanian ; Yun Y. Wang
Utilization of Soft Rot Cavity Formation as a Tool for Understanding the Relation Between Microfibril Angle and Mechanical Properties of Cellulosic Fibers / Susan E. Anagnost ; Richard E. Mark ; Robert B. Hanna
Determination of Fiber Orientation in Z-Directional Layers of Paper With the Hough Transform / J. Thorpe
Shrinkage of Copy Paper During Dehydration: The Effect of the Forming Section / W.-S. Nam ; G. Kyanka
A Computational Mechanics Model for the Brimforming Process in Paperboard Container Manufacturing / Kashyap Muthuraman
Nonlinear Finite Element Modeling of Corrugated Board / A. C. Gilchrist ; J. C. Suhling ; T. J. Urbanik
The Development of a Simple Three Dimensional Constitutive Model for the Analysis of Wood / William F. Cofer ; Ying Du ; John C. Hermanson
Debonding and Buckling of a Thin Film Bonded to a Rigid Surface / Zhaohui Sun
An Improved Shear Test Fixture Using the losipescu Specimen / Jen Y. Liu ; Dwight D. Flach ; Robert J. Ross ; Gary J. Lichtenberg
An Insight Into the Deformation of Cellulosic Fibrous Networks / Wadood Y. Hamad ; Hanna Rokbaa ; Samir Elsayyad
Engineering Paper Tubes to Improve Winding Performance / T. D. Gerhardt ; Y. P. Qiu ; Y. Wang ; C. G. Johnson ; M. McCarthy ; D. E. Rhodes
Author Index
Mesomechanics Analysis of Medium to High Density Paper Sheets / Richard W. Perkins
Random Fiber Networks and Special Orthotropic Elasticity of Paper / M. Ostoja-Starzewski ; D. C. Stahl
Constitutive Models for Paper and Other Ribbon-Like Nonwovens: A Literature Review / M. K. Ramasubramanian ; Yun Y. Wang
16.

図書

図書
sponsored by the Applied Mechanics Division, ASME, the Materials Division, ASME ; edited by Mehrdad Massoudi, K. R. Rajagopal
出版情報: New York : American Society of Mechanical Engineers, c2000  v, 147 p. ; 28 cm
シリーズ名: AMD ; vol. 244
MD ; vol. 92
所蔵情報: loading…
17.

図書

図書
sponsored by the Materials Division, ASME, the Manufacturing Engineering Division, ASME, the Heat Transfer Division, ASME ; edited by Remn-Min Guo, James J. M. Too
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 255 p. ; 26 cm
シリーズ名: MD ; vol. 67
所蔵情報: loading…
18.

図書

図書
sponsored by the Materials Division, ASME, the Applied Mechanics Division, ASME ; edited by Mary C. Boyce
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  vi, 438 p. ; 26 cm
シリーズ名: MD ; vol. 68
AMD ; vol. 215
所蔵情報: loading…
19.

図書

図書
sponsored by the Materials Division, ASME ; edited by V.K. Stokes
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 71 p. ; 26 cm
シリーズ名: MD ; vol. 70
所蔵情報: loading…
目次情報:
A history of the Materials Division / Vijay K. Stokes
A century of giants, a history of the Materials Division of the American Society of Mechanical Engineers / J. George H. Thompson
A history of the Materials Division / Vijay K. Stokes
A century of giants, a history of the Materials Division of the American Society of Mechanical Engineers / J. George H. Thompson
20.

図書

図書
sponsored by the Materials Division, ASME ; edited by Ted Nicholas
出版情報: New York : American Society of Mechanical Engineers, c1996  xi, 269 p. ; 28 cm
シリーズ名: MD ; vol. 74
所蔵情報: loading…
21.

図書

図書
sponsored by the Materials Division, ASME ; edited by Vipin Kumar, Karl A. Seeler
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 105 p. ; 26 cm
シリーズ名: MD ; vol. 76
所蔵情報: loading…
22.

図書

図書
sponsored by the Materials Division, ASME ; edited by H. P. Wang ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  vi, 409 p. ; 26 cm
シリーズ名: MD ; vol. 79
所蔵情報: loading…
23.

図書

図書
sponsored by the Materials Division, ASME ; edited by Vipin Kumar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  v, 117 p. ; 26 cm
シリーズ名: MD ; vol. 82
所蔵情報: loading…
目次情報: 続きを見る
New Pathways to Microcellular and Ultramicrocellular Polymeric Foams / Y. Paul Handa ; Zhiyi Zhang
Potential of Porous Microcellular Polymers in Biomaterials Research / Vipin Kumar
Fibroin and Polymer-Based Fibroporous Biomaterials: Candidate Materials for Biomechanical Implants? / Joan E. Sanders ; Sam T. Bishop ; Charlotte E. Stiles ; Philipp K. Schuessler
Sound Absorption of Solid-State PETG Foams / Nathaniel Lee ; Per G. Reinhall
Evaluation of the Acoustic Properties of Silica Aerogels / John F. T. Conroy ; Bouvard Hosticka ; Scott C. Davis ; Pamela M. Norris
Some Experiments on the Fracture Behavior of Microcellular Polycarbonate / Chris C. Barlow ; Rajendra K. Bordia ; Brian Flinn ; John E. Weller
Experiments on the Impact Strength of Microcellular Polycarbonate
Mechanical Properties of Cellular Polyurethanes Filled With Polyurethane Disperse Filler / Karena L. Swisher ; Fyodor A. Shutov
A Stress and Relative Density Dependent Dynamic Compliance Spectra Model of the Creep Response of Microcellular Polycarbonate / William D. Armstrong
Bubble Growth in Thermoplastic Foam Extrusion / N. S. Ramesh
In-Line Measurement of Gas Solubility in Polystyrene and Polyethylene Terephthalate Melts During Foam Extrusion / Qiang Zhang ; Marino Xanthos ; Subir K. Dey
Foaming of Poly(Ethylene Terephthalate) Modified With Tetrafunctional Epoxy / Sonia Japon ; Louis Boogh ; Yves Leterrier ; Jan-Anders E. Manson
Foam Extrusion Technology of Microcellular Plastics / Minoru Shimbo ; Kouji Nishida ; Shigeo Nishikawa ; Takanori Sueda ; Mitio Eriguti
Polystyrene/Acrylic Blends and Their Application in Foam Production: Part II--R134a Blowing Agent / Peter J. Smith ; Bernard J. Cross ; Stuart Corr ; Richard Gendron ; Louis E. Daigneault
More Experiments on Thermoplastic Foam Sheet Formation / Shau-Tarng Lee
Author Index
New Pathways to Microcellular and Ultramicrocellular Polymeric Foams / Y. Paul Handa ; Zhiyi Zhang
Potential of Porous Microcellular Polymers in Biomaterials Research / Vipin Kumar
Fibroin and Polymer-Based Fibroporous Biomaterials: Candidate Materials for Biomechanical Implants? / Joan E. Sanders ; Sam T. Bishop ; Charlotte E. Stiles ; Philipp K. Schuessler
24.

図書

図書
sponsored by the Materials Division, ASME ; principal editors, Daniel C. Davis ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1998  vii, 362 p. ; 28 cm
シリーズ名: MD ; vol. 84
所蔵情報: loading…
目次情報: 続きを見る
Fatigue and Fracture of Metallic Materials
Introduction / Daniel C. Davis
Reliability HCF Design of Gas Turbine Blades Using Probabilistic Goodman Diagram / M.-H. Herman Shen
The Development and Validation of Design-Oriented Metrics for Fretting Fatigue in Titanium Engine Components / M. P. Szolwinski ; G. Harish ; T. N. Farris
High Cycle Fatigue Behavior and Notch Size Effects in Ti-6Al-4V / David B. Lanning ; George K. Haritos ; Theodore Nicholas
Effect of Step Testing and Notches on the Endurance Limit of Ti-6Al-4V / Richard S. Bellows ; Ken R. Bain ; Jerry W. Sheldon
Mechanisms Governing Cyclic Deformation and Damage During Elevated Temperature Fatigue of High Strength Aluminum Alloy 7055 / T. S. Srivatsan ; S. Anand
A Multiparameter Model for the Prediction of Fatigue Crack Growth / A. B. O. Soboyejo ; M. A. Foster ; N. Katsube ; W. O. Soboyejo
Mechanistically-Based Fracture Mechanics Models for the Prediction of Multiple Semi-Elliptical Crack Growth in Q1N (HY80) Pressure Vessel Steel Under Fatigue Loading / J. F. Knott
A Comparison of the Fatigue Crack Growth Behavior of Single Crystal and Polycrystalline Inconel 718 / C. Mercer
Fatigue Life Prediction of an Orthotropic 6061-Aluminum Under Proportional and Nonproportional Loading / H. Nayeb-Hashemi ; H. Lin
Microscale Mechanics of Materials and Structures
Friction and Wear in Lubricated MEMS / Martin L. Dunn ; David T. Read ; Shawn J. Cunningham ; D. C. Senft ; M. T. Dugger ; B. K. Smith
Adhesion, Adhesion Hysteresis and Friction in MEMS Under Controlled Humidity Ambients / M. P. de Boer ; J. A. Knapp ; J. M. Redmond ; T. A. Michalske ; R. Maboudian
Structure and Behavior of Materials for Micromechanical Devices / Peter Krulevitch ; Kirk P. Seward ; Harold D. Ackler ; George C. Johnson ; Roger T. Howe
A MEMS Structure for Measuring the Fracture Strength of Thin Films / Peter T. Jones ; Michael Au
Low-Cycle Fatigue in Aluminum Microbeams / Richard P. Vinci
In-Situ Test Structures for Metrological and Mechanical Characterization of MEMS / Raj K. Gupta
MEMS Testing Techniques for Long-Term Stability / Stuart Brown ; Christopher Muhlstein ; Cameron Abnet ; Clarence Chui
MEMS-Based Test Structures for IC Technology / Stephen A. Smee ; Michael Gaitan ; Yogendra Joshi
Fatigue and Fracture Testing of Microelectromechanical Systems / Roberto Ballarini ; Robert L. Mullen ; Harold Kahn ; Arthur H. Heuer
Size Effects on Mechanical Properties of Polysilicon / William N. Sharpe Jr.
Correlation of Fracture Initiation for Microscale Structures: Free-Standing Silicon and Silicon/Glass Interfaces / Wan Suwito ; Paul E. W. Labossiere
Fracture Tracing and Analysis in Silicon and Glass Wafers / Lawrence D. Dyer
Micromechanics and Laminate Analysis in Honor of Dr. Pagano's 65th Birthday
Potential Effects of Micromechanical Stresses on the Failure Initiation in Composite Laminates / Ajit K. Roy ; Steven L. Donaldson ; Jeff Paine ; N. J. Pagano ; F. G. Yuan
Asymptotic Crack-Tip Fields in an Anisotropic Plate Subjected to Bending Moments and Transverse Shear Loads / S. Yang
Transverse Fracture Toughness of Unidirectional Continuous Fiber and Hybrid Ceramic Matrix Composites / L. R. Dharani ; S. B. Haug
A Novel Compatibility/Equilibrium Based Iterative Post-Processing Approach for Axisymmetric Brittle Matrix Composites / R. A. Chaudhuri ; G. P. Tandon ; A. H. Khan
Mechanisms-Based Failure Laws for Graphite/Epoxy Laminates Under Compression / V. Gupta ; Dan Potter ; Serge Hoart
The Mechanics of Composite Strength Evolution: Concepts and Applications / Ken Reifsnider
Cycle Based Modeling of Composite Fatigue / Yuris A. Dzenis
Holistic Approach for Problems in Heterogeneous Media / Jacob Fish
Load Transfer Characteristics in Metal/Matrix Composites Due to a Fiber Breakage / E. S. Folias
The Fracture Mechanics of Microelectromechanical Systems
Load Transfer Characteristics in the Vicinity of Fiber Breakage / L. N. McCartney
A Novel Eigenfunction Expansion Solution for a Three-Dimensional Crack Problem / Reaz A. Chaudhuri ; Minsheng Xie
Selected Elements of Thermomechanics for Constitutive Equations / Richard B. Hall
Dimensional Stability of Composite in a Space Thermal Environment / Ran Y. Kim ; Allan S. Crasto ; Gregory A. Schoeppner
Interaction of Two Circular Cylindrical Inhomogeneities Under Antiplane Shear / Wu Linzhi
The Transverse Interface Strength of the Fiber-Matrix Interface in Polymer Matrix Composites / T. Criswell ; B. S. Majumdar ; R. E. Dutton ; T. E. Matikas
Analysis and Characterization of Interfacial Fracture Toughness in Model Composite / R. Y. Kim
An Atlas of Asymptotically Singular Stress Fields in Axisymmetric Fiber Push-Out Model / Kishore Pochiraju
Micromechanical Modeling of Fiber Fragmentation in Single Fiber Composite Specimens / Jean E. Davis ; Jianmin Qu
Influence of Multiple Fiber Breaks on Stresses in a Fiber Composite With a Creeping Matrix / Irene J. Beyerlein
Transient Elastic Wave Propagation and Local Dynamic Stress Concentration in Woven Fabric Composites / Tsu-Wei Chou ; Baoxing Chen
Damage Mechanics for Hybrid Laminates / John Whitcomb ; Jae Noh ; Kanthikannan Srirengan
An Approach for Thermoviscoelastic Micro-Analysis for Woven Fabric Laminates / Peter W. Chung ; Kumar K. Tamma
Comparison of Elastic Properties for Unidirectional and Woven Laminates / G. A. Schoeppner ; A. K. Roy
A Three-Dimensional Stress Analysis of Woven Fabric Composites Based on a Mixed Variational Model and Spline Approximation
Free-Edge Delamination in Layered Composites: A Historical Review of the Past 30 Years / A. S. D. Wang
Interlaminar Phenomenon in Composite Materials: 1969-1999 / R. Byron Pipes
Prediction of Damage Evolution in Laminated Composites Subjected to Impact Loading / D. H. Allen ; C. R. Searcy
Crack Propagating in a Bimaterial Functionally Graded Multilayered Composite Media / Sandeep Muju
Ultrasonic NDE of Transverse Cracks in Laminated Composites / K. Maslov ; R. Kim ; V. K. Kinra ; N. Pagano
Guided Waves in a Fiber-Reinforced Composite Material With Interface Layers / S. K. Datta ; W. Zhung ; A. H. Shah
Rayleigh Waves Propagation Along an Oblique Cut Surface of Directional Fiber Reinforced Composites / Tadashi Ohyoshi
Sinc Convolution Solution of the Integral Equation Form of Lame's Equations / Frank Stenger
A Composite-Sheathed Compression Test for Characterizing Pressure-Hardening Materials / Pei Chi Chou ; William J. Flis
An Overview of Shear Deformation Theories and Their Relationships to the Classical Theory / J. N. Reddy
Effect of Deformation-Induced Change of Fiber Orientation on Nonlinear Behavior of Polymeric Composite Laminates / C. T. Sun ; C. Zhu
Displacement Response of Segmented-Stiffness Composite Cylinders / Michael W. Hyer ; Jaret C. Riddick
Model to Predict the Effect of Through-Thickness Loading on Ply Cracking in General Symmetric Laminates
Nonlinear Dynamic Snap-Through Buckling of Composite Laminated Spherical Shells / Yang Yiqian ; Zhang Duan ; Zhou Hongye ; Ma Hezhong ; Wang Tsunkuei
Three-Dimensional Singular Stresses in Open Hole and Rigid Fastener Composites / E. V. Iarve
Moire Interferometry Measurements of Interlaminar Deformation at an Open Hole in Laminated Composite Materials / David Mollenhauer ; Daniel Post ; Kenneth Reifsnider
Damage Initiation and Progression in Multidirectional Laminates With a Hole / J. R. Schaff
Influence of Adhesive Reinforcement on the Mode I Fracture Toughness of a Bonded Joint / M. S. Forte ; J. M. Whitney
Failure Prediction of Bonded Joints of Composite Engineering Structures / Alexander E. Bogdanovich ; Sergei P. Yushanov
Applications of Composite Grid Structures / Stephen W. Tsai
Mechanics of Microvoid Formation During Resin Transfer Molding / Moon Koo Kang ; H. Thomas Hahn
Permeability Measurements of Fiber Preforms and Applications / Ken Han ; Bill Lee ; Brian Rice
Electrical Resistance Measurements in Carbon-Carbon Composites / O. O. Ochoa ; P. A. Parker
Composite Technology Insights That Will Enable the Next Generation Space Telescope / Keith T. Kedward
Inelastic Response of Porous, Hybrid Fiber Composites / Alysha M. Roerden ; Carl T. Herakovich
Fabrication, Testing and Analysis of Composite Sandwich Structures / Isaac M. Daniel ; R. A. Jandro Abot
Evaluation of Complex Stress Intensity Factors in Debonded Sandwich Beams / Bhavani V. Sankar ; Sreerama M. Dharmapuri
Cracking of Plates with Randomly Distributed Holes by a Maximum Entropy Method / M. Ostoja-Starzewski ; Ahmed Al-Ostaz ; I. Jasiuk
Effective Elastic and Strength Properties and Stress Field in Elastic Random Structure Matrix Composites / V. A. Buryachenko
Durability and Damage Tolerance of Heterogeneous Materials
Static and High Strain Rate Compression Testing of Thick Section S-2 Glass/Vinyl Ester Composites for Integral Armor Application / Ann Marie Sastry ; M. V. Hosur ; U. K. Vaidya ; N. Jadhav ; S. Jeelani
Numerical Study of Damage Growth in Particulate Composites / Y. W. Kwon ; C. T. Liu
An Investigation of the Effects of Layer Thickness on the Fracture Behavior of Layered NiAl/V Composites / M. Li ; R. Wang
Behavior of Polymeric Composites Exposed to a Heat Flux Simulating Fire / Mark L. Potocki ; Mark E. Tuttle ; Ann M. Mescher
An Information System for Damage Tolerance of Polymer Matrix Composites / Ozgur Turkgenc ; Reza Dianati ; Milan Mitrovic ; Peter Shypyrkevich
Fracture Behavior of Kaolin-Reinforced High Density Polyethylene / Robert C. Wetherhold ; Dionysios E. Mouzakis
Author Index
Fatigue and Fracture of Metallic Materials
Introduction / Daniel C. Davis
Reliability HCF Design of Gas Turbine Blades Using Probabilistic Goodman Diagram / M.-H. Herman Shen
25.

図書

図書
sponsored by the Materials Division, ASME ; edited by A. Saigal, K. Ramani
出版情報: New York : American Society of Mechanical Engineers, 1999  v, 93 p. ; 28 cm
シリーズ名: MD ; vol. 88
所蔵情報: loading…
目次情報: 続きを見る
An Alternative Mechanical Peel Testing Method for Composite Fiberglass foam Core Sandwiches / John L. Zych ; Scott A. Adamick ; Daniel K. Jones ; Dru M. Wilson ; Wayne A. Boyer
Examining Multiaxial Impact Behavior of Polymer Materials / G. E. Lawrence ; A. Saigal ; M. A. Zimmerman ; R. Greif ; Y. Duan
Effect of Material Properties on Stress Intensity Factor Measurement by the Frozen Stress Method / C. W. Smith ; C. T. Liu
Short Carbon Fibers Composites With High Filler Contents Rheology and Mechanical Properties / Y. Schmitt ; C. Paulick ; Y. Bour ; F. X. Royer
Effect of Thermal Residual Stresses on Polymer/Metal Interfacial Adhesion / Qizhou Yao ; Jianmin Qu
In-Situ Continuous Process for Bonding Glass-Fiber Reinforced Polypropylene to Wood / Karthik Ramani ; Michael Smith ; Heming Dai
Application of High Frequency Dielectric Spectroscopy for the Assessment of Durability of Adhesively Bonded Composite Structures / P. Boinard ; R. A. Pethrick ; W. M. Banks
Development and Characterisation of a Oxazolidone-Isocyanurate-Urethane Modified Diglycidyl Ether of Bisphenol A Epoxy Resin / K. S. Chian ; S. Yi
Design and Analysis Techniques for Filament-Wound Composite Pressure Vessel Domes / William E. Howard ; G. E. O. Widera
On Crack Growth in Composite Cylindrical Shells / Hayder A. Rasheed ; John L. Tassoulas
A Study on the Constitutive Law for Porous Solids With Pressure-Sensitive Matrices and on the Material Behavior of Rubber-Toughened Epoxies / Hyun-Young Jeong
Strengthening of Cracked Reinforced Concrete Beams Through Crackfilling With Polymeric Materials / R. S. Ayyar ; S. P. Burgul
Author Index
An Alternative Mechanical Peel Testing Method for Composite Fiberglass foam Core Sandwiches / John L. Zych ; Scott A. Adamick ; Daniel K. Jones ; Dru M. Wilson ; Wayne A. Boyer
Examining Multiaxial Impact Behavior of Polymer Materials / G. E. Lawrence ; A. Saigal ; M. A. Zimmerman ; R. Greif ; Y. Duan
Effect of Material Properties on Stress Intensity Factor Measurement by the Frozen Stress Method / C. W. Smith ; C. T. Liu
26.

図書

図書
sponsored by the Materials Division, ASME ; edited by O. J. Ilegbusi ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, 1999  v, 114 p. ; 28 cm
シリーズ名: MD ; vol. 89
所蔵情報: loading…
目次情報: 続きを見る
Material Processing
Detection of Wrap-Up Incidents in a Napping Machine / Shahzad A. Dad ; Sagar V. Kamarthi ; Thomas P. Cullinane
Cavity Pressure and Part Quality in the Injection Molding Process / David C. Angstadt ; John P. Coulter
Effect of Matrix Alloying and Reinforcement Coating on Porosity Nucleation in Metal-Matrix Composites / Olusegun J. Ilegbusi ; Jijin Yang
Experimental Analysis of Particle Filtration in Resin Transfer Molding of Preceramic Polymer Based Ceramic Composites / Merve Erdal ; Letizia A. Ambrosoni
Design and Operation of a Droplet Deposition System for Freeform Fabrication of Metal Parts / Ampere A. Tseng ; Munhee Lee ; Bosen Zhao
Application of a Bubble-Induced Turbulence Model to Subcooled Boiling in a Vertical Pipe / Mahmut D. Mat ; Yuksel Kaplan
Characterization of Permeability for Solid Freeform Fabricated Porous Structures / Levent Ertoz ; Selcuk Guceri
Effect of Si-Al Alloy on Kinetics of Reaction-Bonded SiC Infiltration Process
Towards Controllability of Injection Molding / David Kazmer ; David Hatch
Prediction of Phase Segregation During Mold Filling of Semi-Solid Slurries
An Experimental Evaluation of Vibration-Assisted Injection Molding During Manufacturing / Alan M. Tom ; Akihisa Kikuchi
Effect of Crucible Conductivity on Large Diameter, Low Gravity, Bridgman Crystal Growth / Vivek Sahai ; John W. Williamson
Author Index
Material Processing
Detection of Wrap-Up Incidents in a Napping Machine / Shahzad A. Dad ; Sagar V. Kamarthi ; Thomas P. Cullinane
Cavity Pressure and Part Quality in the Injection Molding Process / David C. Angstadt ; John P. Coulter
27.

図書

図書
sponsored by the Materials Division, ASME, the Applied Mechanics Division, ASME ; edited by Assimina A. Pelegri ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  vi, 178 p. ; 26 cm
シリーズ名: MD ; vol. 86
AMD ; vol. 232
所蔵情報: loading…
28.

図書

図書
sponsored by the Materials Division, ASME ; edited by L. S. Turng ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, 2000  vi, 341 p. ; 26 cm
シリーズ名: MD ; vol. 90
所蔵情報: loading…
29.

図書

図書
sponsored by the Materials Division, ASME ; edited by Vipin Kumar
出版情報: New York : American Society of Mechanical Engineers, c2000  v, 103 p. ; 26 cm
シリーズ名: MD ; vol. 91
所蔵情報: loading…
30.

図書

図書
sponsored by the Materials Division, ASME ; edited by M. C. Altan ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, 2000  v, 58 p. ; 26 cm
シリーズ名: MD ; vol. 93
所蔵情報: loading…
目次情報: 続きを見る
Manufacturing of Functionally Graded Materials / Franz-Josef Kahlen ; Aravinda Kar
Microstructural Characterization, Mechanical Properties and Wear Resistance of TiC[subscript p] Reinforced Ni-Alloy Coatings by Laser Synthesis / D. L. Tu ; A. Kar ; X. L. Wu
A Study of Hydroforming for Processing Composites / Michael A. Zampaloni ; Farhang Pourboghrat ; Andre Benard
Effect of Flow Rate on Properties of Resin Transfer Molded Disks / Kristian A. Olivero ; Randal E. Fuller ; Inderbir S. Dhillon ; M. Cengiz Altan
Pore Growth in Foamed Intermetallics for Structural Implants / Olusegun J. Ilegbusi ; Matthew W. Ballas
Modeling of Composite With Meso-Localized Damage Accounting for Local Stress Distribution / Yadong Wu ; Michihiko Nakagaki
Author Index
Manufacturing of Functionally Graded Materials / Franz-Josef Kahlen ; Aravinda Kar
Microstructural Characterization, Mechanical Properties and Wear Resistance of TiC[subscript p] Reinforced Ni-Alloy Coatings by Laser Synthesis / D. L. Tu ; A. Kar ; X. L. Wu
A Study of Hydroforming for Processing Composites / Michael A. Zampaloni ; Farhang Pourboghrat ; Andre Benard
31.

図書

図書
sponsored by the Materials Division, ASME ; edited by W. O. Soboyejo ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c2000  viii, 118 p. ; 26 cm
シリーズ名: MD ; vol. 94
所蔵情報: loading…
目次情報: 続きを見る
Probabilistic Characterization of Fatigue Damage Data for Aerospace Materials / I. R. (Wally) Orisamolu
Statistical Modeling of Microstructural Effects on Fatigue Behavior of [alpha]/[beta] Titanium Alloys / A. B. O. Soboyejo ; S. Shademan ; V. Sinha ; W. O. Soboyejo
Probabilistic Modeling of Fatigue Crack Growth in Ti-6Al-4V / W. Shen
Probabilistic Fatigue Damage Assessment for Small Crack Growth / Zhengwei (Jack) Zhao ; Irewole (Wally) Orisamolu
A Probabilistic Approach to the Modeling of Fatigue in Gamma-Based Titanium Aluminides / J. Lou
Cautionary Aspects of Applied Probabilistics / Charles Annis
Advanced Stochastic Techniques for Jet Engine Component Life Prediction / Dan M. Ghiocel
Life Prediction - The Need for a Mechanistically Based Probability Approach / D. Gary Harlow ; Robert P. Wei
Reliability High Cycle Fatigue Design of Gas Turbine Blading System Using Probabilistic Goodman Diagram / M.-H. Herman Shen ; Theodore Nicholas
Probabilistic High Cycle Fatigue Analysis of Turbine Engine Components / Mark A. Cesare ; Robert H. Sues
Probabilistic Micromechanical Fatigue Model for High Temperature Materials / Robert G. Tryon
Probabilistic Optimum Design of Aircraft Structures / Landon Onyebueke ; Ikechukwu Nnamani
Mechanical Failure of Artificial Joint Materials: Wear and Fatigue / L. D. Timmie Topoleski
Development and Validation of the Small Punch Test for UHMWPE Used in Total Joint Replacements / A. A. Edidin ; S. M. Kurtz
Analysis of the Stem-Sleeve Interface in a Modular Titanium Alloy Femoral Component for Total Hip Replacement / S. Srivastav ; K. Dwyer ; J. Ochoa ; S. Brown
Metal Release from Ti-6AL-4V Posterior Cervical Spine Plates: A Computational and Experimental Study in the Canine Model / M. L. Villarraga
Near Net-Shape Fabrication of Hydroxyapatite and HA-Alloy Composites / A. S. Litsky ; K. H. Sandhage ; E. Saw ; S. Briggs ; P. K. Gallagher
Failure of Ceramic Coatings on Soft Substrates / B. R. Lawn
Clinical Performance - A Reflection of Damage Accumulation / E. Dianne Rekow ; V. P. Thompson
The Tooth as a Basis for Biomimetic Design / S. Kao ; I. Kirkpatrick
Contact Damage of Model Dental Multilayers: Experiments and Finite Element Simulations / R. Wang ; N. Katsube ; R. Seghi ; C. Pagedas ; P. Skraba ; D. Mumm ; A. G. Evans
Failure by Fatigue and Stress Rupture in Fiber-Reinforced Composites / W. A. Curtin
A Probabilistic Approach to the Modeling of Coarse Grain Heat Affected Zone Fracture in A707 Steel Welds / J. Zhou
Deformation and Failure in Stochastic Fibrous Networks: Scale, Dimension and Application / A. M. Sastry ; C. W. Wang ; L. Berhan
Advances in Probabilistic Methods / Thomas A. Cruse
Time-Dependent Reliability of Ceramic Components Under Transient Loads / Osama Jadaan ; Noel Nemeth ; Lynn Powers ; Joe Palko ; Eric Baker
Fatigue Reliability Under Corrosion, Creep, and Fretting Damage / Sankaran Mahadevan
Damage Tolerance in Biomedical Implants: Cardiac Valves and Endovascular Stents / R. O. Ritchie
Pyrolytic Carbons and the Design of Mechanical Heart Valve Prostheses / R. B. More
Laser Microtexturing of Implant Surfaces for Enhanced Tissue Integration / J. L. Ricci ; Harold Alexander
Microstructural Characterization of Micro-Textured Titanium Surfaces / C. Mercer ; S. Allameh ; B. Nemetski ; N. Marcantonio ; J. Ricci
Functional Analysis of Bone-Biomaterial Interface / R. S. Tuan
Priorities and Expectations for Surface Engineering: A Personal View / Jorn Larsen-Basse
Challenges and Opportunities for Prime Reliant The, nal Barrier Coating Systems
The Effects of High Temperature Exposure on the Durability of Thermal Barrier Coatings / N. M. Yanar ; M. J. Stiger ; F. S. Pettit ; G. H. Meier
Corrosion and Wear Behavior of Al 2024 Alloy Coated With Intrinsically Conductive Polymers, ICPs / K. Shah ; J. O. Iroh ; G. Akundy ; Y. Zhu ; O. Popoola
Abrasion of Steel by Diamondlike Carbon Coatings / S. J. Harris
Laser Shock Peening for Fatigue Resistance / Allan H. Clauer ; David F. Lahrman
Thermal Cycling Induced Bond-Coat Rumpling as a Precursor to TBC Failure / D. R. Clarke ; V. K. Tolpygo
Processing and Microstructure Evolution in EB-PVD TBCs / S. G. Terry ; J. Cho ; C. G. Levi
Mechanisms Controlling the Performance and Durability of Thermal Barrier Coatings / D. R. Mumm
Mechanisms for Interfacial Toughness Loss in Thermal Barrier Coating Systems / R. A. Handoko ; J. L. Beuth
Growth and Failure of Oxide Irregularities During Thermal Cycling: Interactions Between Stress, Geometry and Oxide Formation / M. R. Begley ; J. M. Ambrico ; E. H. Jordan
Degradation of the Mechanical Properties of Aluminide Coatings as a Result of Thermal Cycling / M. Walter ; H. Kim
An Investigation of the Effects of Isothermal Exposure on Microstructural Evolution and Oxidation in a Thermal Barrier Coating / T. Chang ; M. E. Walter
Mathematical Modeling of High Velocity Oxygen Fuel Thermal Spraying: An Overview / D. Cheng ; G. Trapaga ; J. W. McKelliget ; E. J. Lavernia
Damage Mechanisms in Plasma-Sprayed Alumina Coatings / Rodney W. Trice ; David W. Prine ; Katherine T. Faber
Optimization and Process Control for High Performance Thermal Spray Coatings / C. Moreau ; L. Leblanc
Towards Reliable Thermal Spray Coatings: An Integrated Approch / S. Sampath
Kinetic Spray: A New Coating Process / T. van Steenkiste
An Investigation of Fatigue in Polymer/Metal Composites / E. Kung
Thermal Spray Processing of Nanostructured Materials / Enrique J. Lavernia
The Anisotropic Elastic Constants of Cancellous Bone / S. C. Cowin
Modeling Fatigue Damage in Chemically Treated Soft Tissues / W. S. Slaughter ; M. S. Sacks
A New Statistical Biomechanics Modeling of Physical and Biochemical Bone Strength Parameters / K. E. Nestor
The Functional Performance of Polymethylacrylate Orthopaedic Bone Cement / P. J. Prendergast
Synthesis and Characteristics of Interpenetrating Polymer Network Hydrogels Based on Silicone and Poly(vinyl alcohol) / S. J. Kim ; M. S. Shin
Probabilistic Approaches to the Prediction of the Effects of Multiple Parameters on the Mechanical Properties of Gamma-Based Titanium Aluminides / Y. Ni
Author Index
Probabilistic Characterization of Fatigue Damage Data for Aerospace Materials / I. R. (Wally) Orisamolu
Statistical Modeling of Microstructural Effects on Fatigue Behavior of [alpha]/[beta] Titanium Alloys / A. B. O. Soboyejo ; S. Shademan ; V. Sinha ; W. O. Soboyejo
Probabilistic Modeling of Fatigue Crack Growth in Ti-6Al-4V / W. Shen
32.

図書

図書
sponsored by the Materials Division, ASME ; edited by T.S. Srivatsan ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1997  viii, 478 p. ; 26 cm
シリーズ名: MD ; vol. 80
所蔵情報: loading…
目次情報: 続きを見る
Processing and performance of functionally graded materials
Durability and damage tolerance of composites
Dissimilar material systems: manufacturing processes, design, and mechanics
Advances in ceramics and ceramic composites
Processing and performance of functionally graded materials
Durability and damage tolerance of composites
Dissimilar material systems: manufacturing processes, design, and mechanics
33.

図書

図書
sponsored by the Materials Division, ASME ; edited by J.P. Gallagher, T.W. Crooker
出版情報: New York : American Society of Mechanical Engineers, c1979  v, 228 p. ; 28 cm
所蔵情報: loading…
34.

図書

図書
sponsored by the Applied Mechanics Division, ASME, and the Materials Division, ASME ; edited by James A. Sherwood, Michael Sheh
出版情報: New York : American Society of Mechanical Engineers, c1995  v, 151 p. ; 26 cm
シリーズ名: AMD ; vol. 213
MD ; vol. 63
所蔵情報: loading…
35.

図書

図書
sponsored by the Materials Division, ASME and the Applied Mechanics Division, ASME ; edited by R.J. Clifton, H.D. Espinosa
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 189 p. ; 26 cm
シリーズ名: MD ; vol. 75
AMD ; vol. 219
所蔵情報: loading…
36.

図書

図書
sponsored by the Materials Division, ASME
出版情報: New York : American Society of Mechanical Engineers, c1995  2 v. (x, 1282 p.) ; 28 cm
シリーズ名: MD ; vol. 69
所蔵情報: loading…
目次情報:
v. 1. Design and manufacture of composites. Durability and damage tolerance of composites. Finite deformation viscoplasticity. Processing, design, and performance of composite materials
v. 2. Intelligent manufacturing and material processing. Clever optimal design and control of materials and structures
v. 1. Design and manufacture of composites. Durability and damage tolerance of composites. Finite deformation viscoplasticity. Processing, design, and performance of composite materials
v. 2. Intelligent manufacturing and material processing. Clever optimal design and control of materials and structures
37.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Hussein M. Zbib, Ismail Demir, Hong-tao Zhu
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 189 p. ; 26 cm
シリーズ名: AMD ; v. 202
MD ; v. 61
所蔵情報: loading…
38.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Nasr Ghoniem
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  vi, 229 p. ; 26 cm
シリーズ名: AMD ; v. 200
MD ; v. 57
所蔵情報: loading…
39.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Shaker A. Meguid
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 113 p. ; 26 cm
シリーズ名: AMD ; v. 199
MD ; v. 55
所蔵情報: loading…
40.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Gregory P. Carman, Chris Lynch, Nancy R. Sottos
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 153 p. ; 26 cm
シリーズ名: AMD ; v. 206
MD ; v. 58
所蔵情報: loading…
41.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Sanjeen Jain, Daniel C.H. Yang
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 141 p. ; 26 cm
シリーズ名: AMD ; v. 208
MD ; v. 59
所蔵情報: loading…
42.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Richard Perkins
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  v, 215 p. ; 26 cm
シリーズ名: AMD ; v. 209
MD ; v. 60
所蔵情報: loading…
43.

図書

図書
sponsored by the Materials Division, ASME ; edited by S.R. White, H.T. Hahn, W.E. Jones
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1995  vi, 253 p. ; 26 cm
シリーズ名: MD ; v. 56
所蔵情報: loading…
44.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, the Materials Division, ASME, the Nondestructive Evaluation Division, ASME ; principal editor, K. Karim-Panahi ; contributing editors, Masanori Shitani ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 145 p. ; 28 cm
シリーズ名: PVP ; v. 309
所蔵情報: loading…
45.

図書

図書
sponsored by the Applied Mechanics Division, ASME, the Materials Division, ASME ; edited by Somnath Ghosh, Martin Ostoja-Starzewski
出版情報: New York : American Society of Mechanical Engineers, c1995  v, 175 p. ; 26 cm
シリーズ名: AMD ; vol. 212
MD ; vol. 62
所蔵情報: loading…
46.

図書

図書
presented at the 1995 ASME International Mechanical Engineering Congress and Exposition November 12-17, 1995 San Francisco, California ; sponsored by the Fluids Engineering Division, ASME [and] the Materials Division, ASME ; edited by Dennis A. Siginer, G.S. Dulikravich
出版情報: New York : American Society of Mechanical Engineers, c1995  v, 75 p. ; 28 cm
シリーズ名: FED ; vol. 235
MD ; vol. 71
所蔵情報: loading…
47.

図書

図書
sponsored by the Heat Transfer Division, the Applied Mechanics Division, and the Materials Division, ASME ; edited by C. Beckermann ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 279 p. ; 28 cm
シリーズ名: HTD ; vol. 284
AMD ; vol. 182
所蔵情報: loading…
48.

図書

図書
sponsored by the Materials Division, ASME ; edited by P.R. Ciriscioli, S.C. Mantell
出版情報: New York : American Society of Mechanical Engineers, c1994  v, 81 p. ; 26 cm
シリーズ名: MD ; vol. 48
所蔵情報: loading…
49.

図書

図書
sponsored by the Materials Division and the Heat Transfer Division, ASME ; edited by K. Himasekhar ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 375 p. ; 26 cm
シリーズ名: MD ; vol. 49
HTD ; vol. 283
所蔵情報: loading…
50.

図書

図書
sponsored by the Materials Division, ASME ; edited by R.C. Wetherhold
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 267 p. ; 26 cm
シリーズ名: MD ; vol. 51
所蔵情報: loading…
51.

図書

図書
sponsored by the Materials Division, ASME ; edited by T.S. Srivatsan ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 291 p. ; 26 cm
シリーズ名: MD ; vol. 52
所蔵情報: loading…
52.

図書

図書
sponsored by the Materials Division, ASME ; edited by V. Kumar, K.A. Seeler
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 283 p. ; 26 cm
シリーズ名: MD ; vol. 53
所蔵情報: loading…
53.

図書

図書
sponsored by the Applied Mechanics Division, and the Materials Division, ASME ; edited by R.C. Batra, H.M. Zbib
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 369 p. ; 26 cm
シリーズ名: AMD ; vol. 183
MD ; vol. 50
所蔵情報: loading…
54.

図書

図書
co-sponsored by the Applied Mechanics, Electrical and Electronic Packaging, Materials, and Production Engineering Divisions, ASME, Materials and Mechanics, and Computational Mechanics Divisions, JSME ; edited by M.A. Schen ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 229 p. ; 28 cm
シリーズ名: AMD ; vol. 187
所蔵情報: loading…
55.

図書

図書
co-sponsored by the Applied Mechanics, Electrical and Electronic Packaging, Materials, and Production Engineering Divisions, ASME, Materials and Mechanics, and Computational Mechanics Divisions, JSME ; edited by M.A. Schen ... [et
出版情報: New York : American Society of Mechanical Engineers, c1994  vi, 229 p. ; 28 cm
シリーズ名: AMD ; vol. 195
所蔵情報: loading…
56.

図書

図書
co-sponsored by the Applied Mechanics, Electrical and Electronic Packaging, Materials, and Production Engineering Divisions, ASME, Materials and Mechanics, and Computational Mechanics Divisions, JSME ; edited by M.L. Dunn ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  v, 81 p. ; 28 cm
シリーズ名: AMD ; vol. 193
所蔵情報: loading…
57.

図書

図書
sponsored by the Materials Division, ASME ; edited by T.H. Tsiang, R.A. Taylor
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1988  iii, 97 p. ; 28 cm
シリーズ名: MD ; vol. 5
所蔵情報: loading…
58.

図書

図書
sponsored by the Materials Division, ASME ; edited by B.V. Kiefer ... [et al.]
出版情報: New York, N.Y. : The Society, c1988  v, 145 p. ; 28 cm
シリーズ名: MD ; vol. 8
所蔵情報: loading…
59.

図書

図書
sponsored by the Materials Division, ASME ; edited by W.E. Moddeman ... [et al.]
出版情報: New York, N.Y. (345 E. 47th St., New York 10017) : ASME, c1987  v, 98 p. ; 28 cm
シリーズ名: MD ; vol. 4
所蔵情報: loading…
60.

図書

図書
sponsored by the Aerospace Division and the Materials Division, ASME ; edited by E. Garcia ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1994  vii, 405 p. ; 28 cm
シリーズ名: AD ; vol. 45
MD ; vol. 54
所蔵情報: loading…
61.

図書

図書
sponsored by the Materials Division and the Applied Mechanics Division, ASME ; edited by L.A. Bertram ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 289 p. ; ill. ; 26 cm
シリーズ名: MD ; vol. 43
AMD ; vol. 168
所蔵情報: loading…
62.

図書

図書
sponsored by the Materials Division, ASME ; edited by K. Kokini
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 237 p. ; ill. ; 26 cm
シリーズ名: MD ; vol. 44
所蔵情報: loading…
63.

図書

図書
sponsored by the Materials Division and the Production Engineering Division, ASME ; edited by M. Ramulu, R. Kamanduri
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  v, 227 p. ; ill. ; 26 cm
シリーズ名: MD ; vol. 45
PED ; vol. 66
所蔵情報: loading…
64.

図書

図書
sponsored by the Materials Division, ASME ; edited by V.K. Stokes
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  ix, 677 p. ; ill. ; 26 cm
シリーズ名: MD ; vol. 46
所蔵情報: loading…
65.

図書

図書
sponsored by the Applied Mechanics Division, the Fluids Engineering Division and the Materials Division, ASME ; edited by D.A. Siginer ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1993  vi, 243 p. ; ill. ; 28 cm
シリーズ名: AMD ; vol. 175
所蔵情報: loading…
66.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by M. Massoudi, K. R. Rajagopal
出版情報: New York : ASME, c1993  v, 159 p. ; 26 cm
シリーズ名: AMD ; vol. 160
MD ; vol. 41
所蔵情報: loading…
67.

図書

図書
sponsored by the Engineering Mechanics Division, ASCE, the Applied Mechanics Division and the Materials Division, ASME ; edited by J. S. Lee ... [et al.]
出版情報: New York : ASME, c1993  v, 211 p. ; 26 cm
シリーズ名: AMD ; vol. 161
MD ; vol. 42
所蔵情報: loading…
68.

図書

図書
sponsored by the Engineering Mechanics Division, ASCE, the Applied Mechanics Division and the Materials Division, ASME ; edited by C. S. Chang, J. W. Ju
出版情報: New York : ASME, c1993  v, 97 p. ; 26 cm
シリーズ名: AMD ; vol. 166
所蔵情報: loading…
69.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by J.W. Ju, K.C. Valanis
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  v, 167 p. ; 26 cm
シリーズ名: AMD ; vol. 142
MD ; vol. 34
所蔵情報: loading…
70.

図書

図書
sponsored by the Materials Division, ASME ; edited by V. Kumar, S.G. Advani
出版情報: New York : ASME, c1992  v, 137 p. ; 26 cm
シリーズ名: MD ; vol. 38
所蔵情報: loading…
71.

図書

図書
sponsored by the Applied Mechanical Division, ASME, the Materials Division, ASME ; edited by R.W. Perkins
出版情報: New York, N.Y. (345 E. 47th St., New York 10017) : American Society of Mechanical Engineers, c1989  vi, 253 p. ; 28 cm
シリーズ名: AMD ; v. 99
MD ; v. 13
所蔵情報: loading…
72.

図書

図書
sponsored by the Aerospace Division, the Applied Mechanics Division, and the Materials Division, ASME ; edited by George K. Haritos, O.O. Ochoa
出版情報: New York, N.Y. : ASME, c1991  v, 127 p. ; 26 cm
シリーズ名: AD ; vol. 21
所蔵情報: loading…
73.

図書

図書
sponsored by the Production Engineering Division, ASME, the Materials Division, ASME ; edited by T.S. Srivatsan, S. Chandrashekhar
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vi, 321 p. ; 26 cm
シリーズ名: PED ; vol. 49
MD ; vol. 27
所蔵情報: loading…
74.

図書

図書
sponsored by the Aerospace Division, the Applied Mechanics Division and the Materials Division, ASME ; edited by G.K.Haritos, O. O. Ochoa
出版情報: New York, N.Y. : ASME, c1991  2 vols. ; 26 cm
シリーズ名: AD ; vol. 25-1,2
所蔵情報: loading…
75.

図書

図書
sponsored by the Materials Division, ASME, the Council of Engineering, ASME ; edited by I. Haque ... [et al.]
出版情報: New York, N.Y. (345 E. 47th St., New York 10017) : ASME, c1988  v, 104 p. ; 28 cm
シリーズ名: MD ; vol. 10
所蔵情報: loading…
76.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by Hussein M. Zbib
出版情報: New York : American Society of Mechanical Engineers, c1992  v, 223 p. ; 26 cm
シリーズ名: AMD ; v. 135
MD ; v. 31
所蔵情報: loading…
77.

図書

図書
sponsored by the Applied Mechanics Division and The Materials Division, ASME ; edited by J.W. Ju
出版情報: New York : American Society of Mechanical Engineers, c1992  v, 297 p. ; 26 cm
シリーズ名: AMD ; v. 132
MD ; v. 30
所蔵情報: loading…
78.

図書

図書
sponsored by the Materials Division, ASME ; edited by George Z. Voyiadjis
出版情報: New York : American Society of Mechanical Engineers, c1992  v, 135 p. ; 26 cm
シリーズ名: MD ; v. 32
所蔵情報: loading…
79.

図書

図書
sponsored by the Materials Division, ASME ; edited by W.-Y. Lu, Ch.-S. Man
出版情報: New York : American Society of Mechanical Engineers, c1992  v, 93 p. ; 26 cm
シリーズ名: MD ; v. 33
所蔵情報: loading…
80.

図書

図書
sponsored by the Materials Division and the Applied Mechanics Division, ASME ; edited by A.D. Freed, K.P. Walker
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  469 p. ; 27 cm
シリーズ名: MD ; vol. 26
AMD ; vol. 121
所蔵情報: loading…
81.

図書

図書
sponsored by the Applied Mechanics Division and the Materials Division, ASME ; edited by R.W. Perkins
出版情報: New York, N.Y. : ASME, c1992  v, 75 p. ; 28 cm
シリーズ名: AMD ; vol. 145
MD ; vol. 36
所蔵情報: loading…
82.

図書

図書
sponsored by the Materials Division, ASME ; edited by T.S. Srinavatsan, E.J. Lavernia
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  vi, 265 p. ; 26 cm
シリーズ名: MD ; vol. 35
所蔵情報: loading…
83.

図書

図書
sponsored by the Materials Division, ASME ; edited by M.M. Mehrabadi
出版情報: New York : ASME, c1992  v, 143 p, ; 26 cm
シリーズ名: MD ; vol. 37
所蔵情報: loading…
84.

図書

図書
sponsored by the materials Division and the Production Engineering Division, ASME ; edited by Jay S. Gunasekera and James C. Malas
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1992  v, 203 p. ; 26 cm
シリーズ名: MD ; vol. 39
PED ; vol.61
所蔵情報: loading…
85.

図書

図書
sponsored by the Materials Division, ASME ; edited by Bhaskar S. Majumdar, Golam M. Newaz, Shankar Mall
出版情報: New York : ASME, c1992  v, 175p. ; 26 cm
シリーズ名: MD ; vol. 40
所蔵情報: loading…
86.

図書

図書
sponsored by the Materials Division, ASME ; edited by. J.L. Rose, A.A. Tseng
出版情報: New York, N.Y. : The Society, c1988  v, 105 p. ; 28 cm
シリーズ名: MD ; vol. 9
所蔵情報: loading…
87.

図書

図書
sponsored by the Applied Mechanics Division, ASME, the Fluids Engineering Division, ASME, the Materials Division, ASME ; edited by Dennis A. Siginer, S.G. Advani
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 315 p. ; 28 cm
シリーズ名: AMD ; v. 217
所蔵情報: loading…
88.

図書

図書
sponsored by the Metal Properties Council, inc., the Materials Division, ASME ; edited by George V. Smith
出版情報: New York : ASME, c1979  v, 476 p. ; 26 cm
シリーズ名: MPC ; 11
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼