close
1.

図書

図書
sponsored by the Pressure Vessels and Piping Divison, ASME ; principal editors, Wing L. Cheng, Arne Holdø ; contributing editors, Mohamed Souli, Shigeru Itoh, Michael Fischer
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vii, 392 p. ; 28 cm
シリーズ名: PVP ; v. 431
所蔵情報: loading…
目次情報: 続きを見る
Advances in Computational Fluid Dynamics
Introduction / W. L. Cheng ; M. Souli ; S. Itoh ; A. Holdo ; M. Fischer
CFD Modeling of Exhaust Gas Re-Circulation / N. Dickson ; A. E. Holdo
Current Role of CFD in the Design of Clarifiers Used in Water and Waste Water Industries / T. C. Ta
CFD Studies of Ballast Water Separators / O. O. Badran ; S. Al-Far ; H. Nilsen
Phenomenological Modelling and Simulation of Fluid Flow and Separation Behavior in Offshore Gravity Separators / E. W. M. Hansen
A Numerical Study of Stratified Layers in Ventilated Enclosures / K. Pikos ; R. K. Calay
The Use of Dynamic Grid Adaptation Algorithms for Modeling Transitional Flow / G. de With ; T. A. Huld
Effects of Reynolds Number on Surface Rolling in Small Drops / A. M. Khan
Wind Loads on Rectangular Free Standing Walls / J. B. Davis
Optimisation of a Fluid Distribution Network Using Computational Fluid Dynamics / S. Platt ; S. Wakes ; A. Cantwell
Study of a Turbulent Natural Convection in Cylindrical Annuli of Gas-Insulated Transmission Lines 400 KV (GIL) / A. Chakir
A Numerical Study of Heat Transfer and Fluid Flow in a Plate Fin-and-Tube Heat Exchanger / M. Tutar ; A. Akkoca ; S. Oztekin
Advances in Fluid Dynamics
Liquid Nitrogen Flashing in a Pressure Vessel Made of Glass Under Rapid Depressurizations / T. Watanabe ; Y. Hanaoka ; I. Tokura
A New Approach in Detecting Hydrocarbon Gas Leaks in Open Ventilated Areas / M. T. Olesen
A Prediction of the Pressure on Formwork by Tribometry / Y. Vanhove ; C. Djelal ; A. Magnin
Study on Oscillated Flow Around Excited Cylinder Using Built-in Electromagnetic Flowmeters / M. Kondo ; Y. Anoda
Advances in Thermal Problems
Numerical and Experimental Investigation of Heated Circular Cylinder / M. Louaked ; N. Michaux-Leblond ; L. Hanich
CHF for Uniformly Heated Vertical Tube Under Medium Pressure Conditions / W. J. Shim ; S.-K. Joo
CFD-Tools for Thermal-Hydraulics Pressurised Thermal Shock Analysis: Comparison Between N3S and STAR CD / S. Bellet ; A. Martin ; S. Laurent ; P. Dolleans
CFD-Tool for Thermal Hydraulics Pressurised Thermal Shock Analysis: Qualification of the Finite Element Code N3S
Thermal-Hydraulic Behavior Inside the Upper Upper Plenum and the Hot Legs of a 1300 MW PWR: Qualification on BANQUISE Mock-up and Application to Real Reactor / A. Caruso ; E. Martino
Advances in Shock Wave and Blasts
Field Tests for Underwater Shock Loading on Karamatsu Wood / M. Nagahara ; S. Nagano ; Y. Kuroyama ; A. Nakachi ; F. Sumiya
Numerical Simulation of Free Forming Using Underwater Shock Wave / H. Iyama ; Z.-Y. Lui
Numerical Simulation of Free Metal Sheet Forming Using the Underwater Explosion of Explosive / H. Lyama
Time-Resolved Pressure Measurements From an Underwater Explosion / G. I. Pangilinan ; J. Namkung ; P. Chambers ; T. P. Russell ; M. R. Baer
A Study on Detonation Failure of Explosives Precompressed by Shock Wave / Y. Hirosaki ; Y. Kato ; Y. Wada ; Y. Ogata ; M. Seto ; K. Katsuyama
Blasting Characteristic of the Buried Vessel in the Ground and Attenuation Characteristic of Seismic Vibration / K. Eguchi
Formation of Metallic Jets by Utilization of Overdriven Detonation of High Explosive / Z.-Y. Liu ; E. Hida ; T. Awano
Designing Viewing Windows for Blast Chambers / A. M. Clayton ; M. Evans
Advances in Safety Assessment
Design by Computational Methods of a Safety Helmet for Racing Car Drivers: Geometry Design and Peripheral Vision Analysis / R. Palmer ; W. Tiu ; M. G. Armstrong
The Design by Computational Methods of a Safety Helmet for Racing Car Drivers: Computational Fluid Dynamics for External Aerodynamics / S. J. Wakes
The Design by Computational Methods of a Safety Helmet for Racing Car Drivers: Computational Fluid Dynamics for Internal Ventilation and Comfort
The Design by Computational Methods of a Safety Helmet for Racing Car Drivers: Application of Integrated Software Tools
Crashworthiness of Racing Car Helmets
Advances in Structural Mechanics and Integrity Assessment
French NPPs Integrity Assessment and Life Management - New Revolution for RPV Life Evaluation / G. Bezdikian ; C. Courteau ; D. Moinereau
Assessment of French Reactor Pressure Vessel Integrity: Neutron Fluence Calculations at EDF / F. Marcel ; J. C. Barral ; B. Roulier
Increase of Availability of Steam Turbines by Means of Non-Linear Fracture Mechanics / J. Harder ; A. Bagaviev ; H. Luft
Design and Strength Analysis of Structural Parts of an Exhaust Gas Heat Exchanger / T. Gro[beta] ; C. Merten
Planning and Optimisation of Piping Systems for Chemical and Power Plants With GEF - PIPE / T. Brummer ; B. Charalambus ; A. Schleyer
A Numerical Technique for the Prediction of Interfacial Damage in Elastoplastic Composites / L. Benabou ; M. Nait-Abdelaziz ; N. Benseddiq
Modeling Pressure Transients in Viscoelastic Pipes / H. A. Warda ; H. A. Kandil ; A. A. Elmiligui ; E. M. Wahba
Thermal Shock Investigation on Solid Cylinders Subjected to Rapid Energy Deposition / J. Zheng ; R. P. Taleyarkhan ; S. H. Kim
Advances in Fluid-Structure Interactions
Three-Dimensional Simulation of Tube Bundle Vibration Induced by Cross-Flow in Real Apparatus / J. Stolz ; K. Strohmeier
On the Development of the Marine Dynamics Virtual Laboratory, MDVL / A. Derradji-Aouat
Study on Cavitating Leakage-Flow-Induced Vibrations / M. Arai
ALE and Fluid-Structure Interaction in LS-DYNA
Euler-Lagrange Formulation for Fluid-Structure Interaction Problems
Student Papers
Beowulf Clusters for Advanced CFD Research / T. J. Leger ; S. A. Mortara
Thick-Liquid Cylindrical Jets for Heavy-lon Fusion Chambers / R. P. Abbott
Author Index
Advances in Computational Fluid Dynamics
Introduction / W. L. Cheng ; M. Souli ; S. Itoh ; A. Holdo ; M. Fischer
CFD Modeling of Exhaust Gas Re-Circulation / N. Dickson ; A. E. Holdo
2.

図書

図書
sponsored by the Pressure Vessels and Piping Divison, ASME ; principal editor, Denniss H. Martens ; contributing editors, Dennis K. Wiiliams ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vii, 403 p. ; 28 cm
シリーズ名: PVP ; v. 430
所蔵情報: loading…
目次情報: 続きを見る
Pressure Vessels, Heat Exchangers and Components
Introduction / Dennis K. Williams
Simplified Formula for Stress Concentration Factor in Radial Nozzle Shell Junctions Under Internal Pressure Loading / K. Gurumurthy ; R. Jain ; V. Y. Salpekar
DQEM Vibration Analyses of Nonprismatic Shear Undeformable Beams Resting on Elastic Foundations / C.-N. Chen
Comparison of Methods to Evaluate Finite Element Results for an Atypical Vessel Nozzle / T. G. Seipp
Shock Tube Treatment of High Pressure Discharge of Pipe Blockage / D. K. Williams
Application of Pressure Vessel Design With Non-Uniform Temperature Distribution / N. Xin ; P. J. Li
Alternate Coke Drum Skirt Designs / J. Taagepera ; J. Kreiner
Investigation and Repair of Heat Exchanger Tubesheet-to-Channel Flange / M. A. Porter ; D. H. Martens ; S. R. Massey ; D. R. Skaggs ; B. C. Hiatt
Axisymmetric Closed Form Solution of Pipe Strap Anchors
Shakedown Loads for Structures With Severe Geometrical Discontinuities / M. M. Megahed ; M. Abdel-Karim ; M. S. Attia
Analysis of Loads for Nozzles in API 650 Tanks / M. Lengsfeld ; K. L. Bardia ; K. Hathaitham ; D. G. LaBounty ; M. C. Lengsfeld
Buckling of a Tilted Cylindrical Shell Subject to Liquid Pressure / D. Redekop
Piping and Components
Investigation of Stress Intensification Factors for Circumferential Fillet Welds / James F. McCabe ; Allan B. Glickstein ; E. A. Wais ; R. B. Jenkins ; E. C. Rodabaugh
Branch-to-Run Thickness Ratio Effects in Small Piping Branch Connections Under Out-of-Plane Branch Moment Loads / J. F. McCabe
B[subscript 2] and C[subscript 2] Stress Indices for Large Angle Bends / R. Kumar ; M. A. Saleem
Nonlinear Elastostatics of a Toroidal Shell Subject to Local Loading / Y. M. Zhang
Analysis of a Pipe With a Trunnion Attachment for Moment Loadings / C. Basavaraju
Limit Load Analysis
Comparison of Limit Load, Linear and Nonlinear FE Analysis of a Typical Vessel Nozzle / Maher Y. A. Younan ; W. D. Reinhardt
Limit Load Estimation Using Plastic Flow Parameter in Repeated Elastic Finite Element Analyses / L. Pan ; R. Seshadri
Limit Loads for Layered Structures Using Extended Variational Principles and Repeated Elastic Finite Element Analysis
A Programming Method for Limit Load and Shakedown Analysis of Structures / A. R. S. Ponter ; H. Chen
Limit-Load Analysis of Pipe Bends Under Out-of-Plane Moment Loading and Internal Pressure / H. M. Mourad ; M. Y. A. Younan
Fatigue and Fracture
Applications on Components / Surender Bhandari ; Dominique Moinereau ; Kenneth K. Yoon
Structural Integrity of Bi-Metallic Welds in Piping: Fracture Testing and Analysis / G. Chas ; C. Faidy
Corrosion Damage Assessment and Burst Test Validation of 8 in. X52 Linepipe / A. D. Karstensen ; A. T. Smith ; S. N. Smith
Definition of Appropriate Safety Factors for Fast Fracture Analysis of the Safety Injection Austenitic Piping System of a New Nuclear Power Plant / J. Heliot ; E. Meister
Design of Autofretted Diesel Engine Injection Components Based on Fracture Mechanics / R. Thumser ; J. W. Bergmann ; M. Vormwald
New Developments
Applying Multilevel Sub-Structuring to Model Wide Spread Fatigue Damage in Aging Aircraft Structures / W. A. Moussa
Fracture of Weld Including Mismatch Effect / P. Hornet
Master Curve Application to Embrittled RPVs of VVER Type Reactors / M. Brumovsky
Simulation of the Ductile to Brittle Transition of a 16 MND 5 Ferritic Steel / S. Marie
Simplified Methods
A New Simplified Method for Calculating J Integral: The Overstress Method: Applications to Embedded Defects
A Simplified Approach for Quantifying the Behaviour of a Process Zone at the Root of a Blunt Flaw / E. Smith
A Methodology for Assessing Appropriate Safety Factors for Fast Fracture Analysis of Nuclear Power Plant Components
Reactor Pressure Vessel Assessment
French NPPs Life Management: Reactor Coolant Components and Reactor Pressure Vessel Integrity Assessment / G. Bezdikian ; D. Moinereau
A Finite Element Study on the Integrity Evaluation Method of Subclad Cracks Under Pressurized Thermal Shock Transients / B. G. Koo ; J. S. Kim ; J. B. Choi ; Y. J. Kim ; Y. W. Park
A Comparison of Fracture Mechanics Methodologies for Postulated Flaws Embedded in the Wall of a Nuclear Reactor Pressure Vessel / T. L. Dickson ; B. R. Bass ; P. T. Williams
Constraint Based Fracture Mechanics Analysis Considering Variations of Crack Geometry Under Pressurized Thermal Shock
Fitness for Service, Life Extension, Remediation and Repair
The Use of "Fitness for Service" Assessment Procedures to Establish Critical Flaw Sizes in High Pressure Gas Cylinders / William J. Koves ; J. H. Smith ; M. D. Rana ; C. Hall
Evaluation of Hydrostatic Test Over-Pressurization Transient / F. V. Ellis ; R. J. Gdaniec
Water-Cooled Tubing Damage Assessment / S. Tordonato
Creep Fatigue Tests of Modified JIS SUS 410L Stainless Steel for Damage Evaluation of High Temperature Structural Design / K. Kobatake ; T. Kaihara ; N. Takeshige ; Y. Miwa
Remaining Life of Containment Vessels for Repeated Explosive Testing / T. A. Duffey ; E. A. Rodriguez
Proposed Mechanical Clamping Device to Assure Structural Integrity of Degraded Socket-Welded Joints in Piping Components / D. R. McGowan ; K. K. Dwivedy
On the Assessment of Through-Wall Circumferential Cracks in Steam Generator Tubes With Tube Supports / X. Wang ; W. Reinhardt
Failure Assessment Diagram of Tilted Cracks / L. Wu ; G. Sun ; J. Zheng
Student Papers
Elastic-Shakedown Analysis of Axisymmetric Nozzles / M. Muscat ; D. Mackenzie
Determination of Gasket Stress Levels During High Temperature Flange Operation / W. Brown ; M. Derenne ; A.-H. Bouzid
An Analysis of Implementing Wireless Technology to Further Enhance Nuclear Power Plant Cost Efficiency, Safety, and Increased Employee Output / A. Bhavnani
A Coupled Meshless-Finite Element Method for Fracture Analysis of Cracks / B. N. Rao ; S. Rahman
Experimental and Numerical Investigation of Ductile Crack Extension in a High Strength Pipeline Steel / E. Hippert, Jr. ; C. Ruggieri
Effect of Temperature on Fatigue Crack Growth in CPVC / M. Irfan-ul-Hag ; N. Merah
Author Index
Pressure Vessels, Heat Exchangers and Components
Introduction / Dennis K. Williams
Simplified Formula for Stress Concentration Factor in Radial Nozzle Shell Junctions Under Internal Pressure Loading / K. Gurumurthy ; R. Jain ; V. Y. Salpekar
3.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Kisisel, I. T. ; Ezekoye, L. I.
出版情報: New York : American Society of Mechanical Engineers, c2001  vi, 237 p. ; 28 cm
シリーズ名: PVP ; v. 426
所蔵情報: loading…
目次情報: 続きを見る
License Renewal and Aging Management
Plant Life Management Program at NPP Dukovany / Milan Brumovsky ; Karel Pochman ; Rostislav Vitoch
Analysis of In-Service Inspection Data of Pressure Tubes and Feeder Pipes in Wolsong Unit 1 / Sung-Sik Kang ; Hae-Dong Jung ; Youn-Won Park
EU Funded Research Activities Conducted in the Area of Plant Life Management and Aging / P. Lemaitre ; G. Van Goethem
French RPV Life Management Program / Claude Faidy ; Henriette Churier-Bossennec ; Georges Bezdikian
A Ductile Crack Growth Behavior of a Pressure Vessel With Low Upper Shelf Energy / Yoshio Urabe ; Koji Koyama ; Katsumi Hosaka ; Yasuhide Asada
French Nuclear Power Plants Life Management Steam Generator Replacement Strategy / Serge Rostain
Development of the Cast Austenitic Stainless Steel (CASS) Program for Calvert Cliffs Nuclear Power Plant / Jennifer R. Zinker ; Jeffrey C. Poehler
Using Condition Monitoring to Predict Remaining Life of Electric Cables / Robert Lofaro ; Peter Soo ; Michael Villaran ; Edward Grove
Aging of Polymers: A Molecular Perspective / Rajendra Supkar
Corrosion Considerations and Mitigations for Piping at Power Plants / Eldon R. Dille
Operation and Maintenance and Piping Restraints
Estimation of Component Failure Rates for PSA on 49 Japanese LWRs 1982-1997 / Akihiro Matsuzaki ; Yukihiro Kirimoto
Dynamic Load Analyzer in Structural Analysis / Milton Dong ; Hong Ming Lee
A Complete Water Hammer Analysis Solution Using HSTA and ME101 / Asif Arastu ; Eugene Tom
Risk Based Inspection Study on a Fluid Coking Unit Using API 581 Method / Boyd McKay
The Effect of the Location of a Crack Near a Connection on the Crack-System Compliance of a Piping System / E. Smith
Dealing With Some Troublesome Flanges / Michael Hamblin ; Paul Finch
Pumps, Valves and Components
Performance of MOV Stem Lubricants at Elevated Temperature / Kevin G. DeWall ; Michael E. Nitzel ; John C. Watkins
Effect of Spring Stiffness on the Dynamic Response of a Relief Valve / Mike Stojakovic
An Examination of the Effect of Valve Design on Stiffness / L. I. Ezekoye
Development of a DC Motor Model and an Actuator Efficiency Model / Michael G. McKellar
Stellite 6 Friction Changes Due to Aging and In-Service Testing
Cost Saving Maintenance Strategy Based on Risk-Informed Procedures / Robert Kauer
Application of Wavelet Transformation in the Analysis of Vibration Signals / Surajudeen A. Adewusi ; Bassem O. Al-Bedoor
Nonlinear Dynamic Model of an Inextensible Rotating Flexible Arm Supported on Flexible Base / A. El-Sinawi ; M. N. Hamdan ; B. O. Al-Bedoor
Stall Characteristics in a Radial Diffuser / Kamorudeen B. Abidogun ; Saad A. Ahmed
On the Vibration of Rotating Blade With Torsionally Flexible Shaft / Y. N. Al-Nassar
Student Papers
Shipyard Installation Procedure for Spiral-Wound Metallic Gaskets / David H. Leach
Improving Design of Piping for Combined Cycle Gas Turbine Power Plants (CGTPP) With Computational Technology Developed to Satisfy Safety Requirements for Nuclear Power Plants / Zsolt Revesz ; Christoph Backes
Experimental Investigation of Heat Exchanger Tube Sheet Hole Enlargement / Abdel Rahman N. Shuaib ; Nesar Merah ; Marwan K. Khraisheh ; Ibrahim M. Allam ; Salamah S. Al-Anizi
Author Index
License Renewal and Aging Management
Plant Life Management Program at NPP Dukovany / Milan Brumovsky ; Karel Pochman ; Rostislav Vitoch
Analysis of In-Service Inspection Data of Pressure Tubes and Feeder Pipes in Wolsong Unit 1 / Sung-Sik Kang ; Hae-Dong Jung ; Youn-Won Park
4.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Hafner, Ronald S. ; Ammerman, Douglas J. (Douglas James)
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 127 p. ; 28 cm
シリーズ名: PVP ; v. 425
所蔵情報: loading…
目次情報: 続きを見る
Digital Radiography of a Drop Tested 9975 Radioactive Materials Packaging / Glenn Abramczyk ; Paul S. Blanton
Development of an Impact Limiter for Type B Packages: Characterization of Its Polymeric Material / Rogerio P. Mourao ; Miguel M. Neto
Effect of Orientation and Strain Rate on Crush Strength of Cellulose Fiberboard Assemblies / Allen C. Smith ; Philip R. Vormelker ; Glenn K. Chapman ; Greg D. Creech ; Kenneth W. Miller ; Jamil Khan ; Mir Zahedul Huq Khandkar
Evaluation of Celotex for Shock Protection of Pressure Vessels / Jamil A. Khan
Effect of Glue Layers on Response of Cellulose Fiberboard at Low Temperature
Computational Parametric Analysis of Mechanical Behaviors of Celotex Implanted With Glue Plates / Chung Gong ; Tsu-Te Wu
Dynamic Analysis of 9975 Shipping Package Without Overpack Subjected to 55-Foot Drop
Preliminary Drop Testing Results to Validate an Analysis Methodology for Accidental Drop Events of Containers for Radioactive Materials / Spencer D. Snow ; D. Keith Morton ; Thomas E. Rahl ; A. G. Ware
Analysis of Statically Indeterminate Tie-Down Systems / Donald S. Hoang
The Effect of an Annular Celotex Gap on the 9975 Package / Bruce J. Hardy
ASTM Standard Practice for Thermal Qualification of Type B Nuclear Packages / Jack Hovingh ; Jorman A. Koski
Methodology for the Projection of Spent Nuclear Fuel Discharges / Barrie McLeod ; Thomas Pollog
Hydrogen-Induced Cracking in Titanium Drip Shield of High-Level Waste Repository / Stephen C. Lu
Canister Considerations for Commercial Spent Nuclear Fuel / Robert M. Burgoyne
Probabilistic Analysis of Weld Integrity for Spent Fuel Storage Casks / Frederic A. Simonen ; Cayanato G. Santos ; Nicholas A. Klymyshyn
Thermal Controls for the On-Site Transfer of Mixed Oxide Scrap / Narendra K. Gupta ; Steven J. Hensel ; Ronald R. Livingston
Effective Thermal Conductivity of Consolidated PWR Fuel Rods / Matthew D. Hinds
Author Index
Digital Radiography of a Drop Tested 9975 Radioactive Materials Packaging / Glenn Abramczyk ; Paul S. Blanton
Development of an Impact Limiter for Type B Packages: Characterization of Its Polymeric Material / Rogerio P. Mourao ; Miguel M. Neto
Effect of Orientation and Strain Rate on Crush Strength of Cellulose Fiberboard Assemblies / Allen C. Smith ; Philip R. Vormelker ; Glenn K. Chapman ; Greg D. Creech ; Kenneth W. Miller ; Jamil Khan ; Mir Zahedul Huq Khandkar
5.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Lidbury, David, P. ; Scarth, Douglas A.
出版情報: New York, N.Y., c2001  vi, 207 p. ; 28 cm
シリーズ名: PVP ; v. 423
所蔵情報: loading…
目次情報: 続きを見る
Application of Fracture Mechanics in Failure Assessment
Introduction / David Lidbury ; Doug Scarth
Allowable Flaw Sizes for Pipes Determined by Two-Parameter Approach / K. Miyazaki ; K. Hasegawa ; N. Miura ; K. Kashima
Extending Fracture Mechanics for Cracks to the Behaviour of Notches / T. Smith ; D. A. Scarth
Brittle Fracture From Interacting Surface Breaking Defects / B. Bezensek ; J. W. Hancock
An Overview of R6 Revision 4 / A. R. Dowling ; J. K. Sharples ; P. J. Budden
Crack Arrest Procedure in R6 / D. C. Connors
R6 Assessment of Mode II Fracture Data for a Ferritic Steel / M. C. Smith ; T. D. Swankie
Recent Leak-Before-Break Development Work Associated With R6 / S. F. Yellowlees ; D. G. Hooton
Numerical Modelling of Load-History Effects on Ductile Tearing / A. H. Sherry ; M. A. Wilkes ; D. Beardsmore ; B. Ainsworth
Benchmark Comparisons of Fracture Assessment Methods Utilized in UK Industry / K. May ; W. Geary ; D. Shuter ; H. Bainbridge ; P. Smith
Validation of Constraint-Based Methodology in Structural Integrity-VOCALIST / D. Lidbury ; R. Bass ; S. Bhandari ; D. Connors ; U. Eisele ; E. Keim ; H. Keinanen ; S. Marie ; G. Nagel ; N. Taylor ; Y. Wadier
Validated Axial Residual Stress Profiles for Fracture Assessments of Austenitic Stainless Steel Pipe Girth Welds / P. J. Bouchard ; R. A. W. Bradford
Networking for Improved Structural Integrity Assessment Benchmarks / R. Hurst ; D. McGarry ; R. Rintamaa
Failure Types and Integrity Management of Bimetallic Weldment in View of Engineering Critical Assessment / A. Laukkanen ; P. Nevasmaa ; U. Ehrnsten ; H. Talja ; K. Wallin
Progress on Local Approach Modelling of Cleavage and Ductile Crack Growth in NESC Spinning Cylinder Test / M. C. Burstow ; I. C. Howard
Fatigue and Fracture of Nuclear Components
Fracture Toughness Testing of ASTM A285 Steel for Fracture Analysis of Savannah River Site Storage Tanks / P. S. Lam ; K. H. Subramanian ; A. J. Duncan ; R. L. Sindelar ; J. J. Lewandowski ; C. J. Tuma
Evaluation of Crack Opening Behavior for Cracked Pipes-Effect of Restraint on Crack Opening
Dynamic Impact Analysis of Bagless Transfer System 3013 Can in Drops at Various Inclination Angles / C. Gong ; D. R. Leduc
The Master Curve
Effects of Material Inhomogeneity on the T[subscript 0] Reference Temperature in Thick Section A533B / Mark Kirk ; J. A. Joyce ; R. L. Tregoning
Japanese Fracture Toughness Data Analysis Using the Master Curve Method / K. K. Yoon ; J. B. Hall ; W. A. Van Der Sluys ; M. Higuchi ; K. Iida
Determination of Fracture Toughness in a Nozzle Flange Concept Ring Using the Master Curve / J. G. Blauel ; D. Siegele
On the Micromechanical Mechanisms that Contribute to the Yield Strength/Temperature Dependence for Reactor Vessel Steels / W. Pavinich
Quantitative Experimental Method for Studying Brittle Fracture Constraint Loss in CT and 3PB Specimens
High Cycle Thermal Fatigue Crack Initiation and Growth Behaviour in Simulated BWR Environment / M. Hayashi ; A. Hirano
Author Index
Application of Fracture Mechanics in Failure Assessment
Introduction / David Lidbury ; Doug Scarth
Allowable Flaw Sizes for Pipes Determined by Two-Parameter Approach / K. Miyazaki ; K. Hasegawa ; N. Miura ; K. Kashima
6.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Moody, F. J.
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vi, 257 p. ; 28 cm
シリーズ名: PVP ; v. 421
所蔵情報: loading…
目次情報: 続きを見る
Structures Under Extreme Loading Conditions
Introduction / S. E. Jones ; D. M. Jerome ; H. S. Levine ; R. M. Schmidt
Experiments and Modeling of Rose Granite / C. A. Ross ; N. D. Cristescu
Behavior of Transport Casks Under Explosive Loading: Numerical Models / F. Delmaire-Sizes ; B. Autrusson ; A. Nicaud ; D. Brochard ; F. Gil ; J. M. Guerin ; P. Y. Chaffard
Effects of Precipitation Hardening 2024 Aluminum on Its High Strain-Rate Deformation / M. E. Stevenson ; W. K. Rule ; R. C. Bradt
Loading and Response of Brick Houses by a 40 Tonnes HE-Explosion / J. C. A. M. van Doormaal ; L. H. J. Absil
Simulation of Projectile Impact Using Continuum Damage Mechanics / R. Moraes ; D. Nicholson
Virtual Reality Visualization of Finite Element Models for Automobile Crashworthiness
Normal Penetration of Semi-Infinite Targets by Ogive-Nose Projectiles, Including the Effects of Blunting and Erosion / O. Toness
High Speed Test Track Slipper/Rail Gouging Phenomena Simulations / D. J. Laird ; A. N. Palazotto ; M. D. Hooser
Ballistic Impact Performance of Metals for High Temperature Jet Engine Fan Containment Applications / D. M. Revilock ; J. M. Pereira
Vessel Life Cycle Analysis of the Explosive Destruction System (EDS): A System to Destroy Legacy Chemical Weapons / R. Moehrle ; B. Haroldsen ; M. Chiesa ; J. Dike ; Y. Kan
Sloshing and Fluid-Structure Interaction
Buckling of a LNG Tank Under Dynamic Fluid Pressure Caused by Seismic Excitation / D. C. Ma ; T. Chiba ; H. Tazuke ; T. Sakurai ; S. Yamaguchi ; H. Akiyama
Fluid-Structure Interaction in Tube Bundles Using Homogenization Techniques / K. Cheval ; R. J. Gibert ; D. Broc
Numerical and Experimental Investigations of a Rigid Cone Striking the Free Surface of an Incompressible Fluid / B. Donguy ; B. Peseux ; E. Fontaine
Wind Tunnel Tests on In-Line Oscillation of a Two-Dimensional Circular Cylinder / K. Matsuda ; H. Uejima ; T. Sugimoto
Modeling the Vibrations of Small Bore Piping Systems / M. Pierre ; P. Luc
The Vibration Analysis of Rectangular Water Tanks / M. Ishikawa ; H. Matsuoka ; C. Minowa ; M. Touoshima
Seismic Behaviour of Reactor Cores: Application of Homogenization Techniques
Stochastic Stability of Coupled Dynamical Systems / F. Jedrzejewski
Thermal Hydraulic Phenomena in Vessels, Piping and Components
A Model for Predicting Air Accumulation in Large Siphons / F. J. Moody ; J. C. Jo ; H. E. Harling, Jr.
Numerical Study on Thermal Mixing Flow in Cold Leg During Loss of Coolant Accident / M. H. Park ; K. C. Kim ; H. K. Youm
Thermal Hydraulic Pressure Load on a Safety Depressurization System / S. Cho ; H. J. Chung ; S. Y. Chun
Measurement of Pressure Drop in an Inclined Tube Bundle in a Rectangular Duct / S. K. Choi ; I. K. Choi ; K. Y. Lee ; J. M. Kim ; J. H. Park ; H. Y. Nam
The Effect of Non-Condensable Gas on Dynamic Pressure Induced by Steam-Water Direct Contact Condensation / C. H. Song ; T. S. Kwon ; K. Y. Kim ; M. K. Chung
Application of Minimal Energy Technique for the BEM Solution of the Geometrical Inverse Heat Conduction Problems / C. Y. Choi
Preliminary Relap5 Simulations of Multiple Steam Generator Tube Rupture Events in Korea Next Generation Reactor / J. H. Jeong ; K. S. Chang ; S. J. Kim ; J. H. Lee
Numerical Analysis of Unsteady Turbulent Conjugate Heat Transfer in a Curved Pipe Subjected to Internally Thermal Stratification / Y. I. Kim ; W. K. Shin
Experimental Study on Amplitude and Frequency of Free Surface / M. J. Kim
Investigation on the Degradation Mechanism of 6-Inch Swing Check Valve in Nuclear Power Plant / S. K. Lee ; T. R. Kim ; J. S. Lee
Transient Analysis of Air-Pockets / S. M. Husaini ; J. S. Summy ; R. K. Qashu ; M. J. Vezzuto
Baseline Study to Model a Typical Condensation-Induced Water Hammer Event Measured at the Two-Phase Flow Test Facility (TPTF) in Japan / R. R. Schultz ; M. Kondo ; Y. Anoda
Author Index
Structures Under Extreme Loading Conditions
Introduction / S. E. Jones ; D. M. Jerome ; H. S. Levine ; R. M. Schmidt
Experiments and Modeling of Rose Granite / C. A. Ross ; N. D. Cristescu
7.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Metzger, Don R. ; Badie, Navid
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vi, 224 p. ; 28 cm
シリーズ名: PVP ; v. 417
所蔵情報: loading…
目次情報: 続きを見る
Computational Mechanics
Introduction / Navid Badie ; Don R. Metzger ; Wolf D. Reinhardt ; Jun Tang ; Yetzirah Urthaler
Study of the Transient Temperature Profiles Induced by Changes of the Welding Parameters During Aluminum Two Plate Arc Butt-Welding / P. Viggiani ; Y. Urthaler ; C. Payares ; L. Rojas-Solorzano
Fracture Analysis on a Full-Dimension All-Aluminum Cylinder with Different Cracks / B. Su ; G. S. Bhuyan
Image Processing Method for Nondestructive Damage Evaluation of Low Alloy Ferritic Steel / S. Kumano ; N. Kawase ; N. Yoshimoto ; M. Ozaki ; N. Nishimura
Simulation of GRP Underground Pipes Installation Case Study / A. A. Ibrahim ; N. Zaafarani
Solution of High Gradient Continuum Mechanics Problems by DQEM and DQFDM / Chang-New Chen
A New Penalty Stiffness Treatment for Master-Slave Contact Surfaces / Yi-Hai Shi
Automatic Unstructured Mesh Generator for Arbitrary Planar Domains With a New Smoothing Technique / Raul M. Morillo ; Horacio F. Guzman
A New Unstructured Surface Mesh Generation Scheme for Arbitrary Three-Dimensional Domains
Collapse Surfaces for Perforated Plates with Triangular Penetration Patterns for Ligament Efficiencies Between 0.05 and 0.5 / D. P. Jones ; J. L. Gordon
Design Method for Perforated Plates with Triangular Perforation Pattern / Wolf Reinhardt
On the Response of the Tubesheet Assembly in CANDU Steam Generators During Welding and PWHT Processes / San Iyer ; Nick Idvorian ; Dorel Muth
Probabilistic Fracture Mechanics by Galerkin Meshless Methods: Part I--Rates of Stress Intensity Factors / B. N. Rao ; S. Rahman
Probabilistic Fracture Mechanics by Galerkin Meshless Methods: Part II--Reliability Analysis
Efficient Probabilistic Constraint Evaluation of Reliability-Based Design Optimization Using Meshfree Method / Y. H Park ; H. J. Yim
Modified Damping Using Projection Methods for Explicit Transient Problems
Risk Assessment
Providing Risk-Based Information: Do You Have the Right Process? / F. L. (Bill) Cho ; V. H. Guthrie ; D. A. Walker ; A. M. Huff
The Influence of Finite Three Dimensional Axial Erosion on the Fatigue Life of Partially Autofrettaged Pressurized Cylinders / C. Levy ; Q. Ma ; M. Perl
A Methodology for Fatigue Reliability Analysis of Mechanical Components Using First Order Reliability Method / J. Tang ; Y. H. Park
Preventing Losses Involving Software: How Can You Be Sure? / S. G. Schoolcraft ; P. B. Parikh
An Oblique Approach to Nuclear Criticality Safety Using a Causal Sequence Model to Introduce Risk Reduction Interventions / W. L. Andrews, Jr. ; J. R. van Dorp
Enterprise Risk Management
Measuring Organizational Safety and Environmental Health Performance / W. E. Hanson
Safety Management Program for Compressed Gas Operations / B. Blyukher
Author Index
Computational Mechanics
Introduction / Navid Badie ; Don R. Metzger ; Wolf D. Reinhardt ; Jun Tang ; Yetzirah Urthaler
Study of the Transient Temperature Profiles Induced by Changes of the Welding Parameters During Aluminum Two Plate Arc Butt-Welding / P. Viggiani ; Y. Urthaler ; C. Payares ; L. Rojas-Solorzano
8.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Hsu, K. H. ; 澤, 俊行
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 194 p. ; 28 cm
シリーズ名: PVP ; v. 416
所蔵情報: loading…
目次情報: 続きを見る
On Testing Protocols for Qualifying Flexible Graphite Based Gaskets for High Temperature Petrochemical Services / R. Mueller ; J. R. Payne ; M. Derenne
Stress Analysis and Evaluation of the Sealing Performance in Pipe Flange Connections With Spiral Wound Gaskets Under Internal Pressure (The Effect of the Nominal Diameter of Pipe Flange) / Toshiyuki Sawa ; Naofumi Ogata
Determination of the Mechanical and Thermal Properties of Selected Gasket Types / Warren Brown ; Michel Derenne ; Abdel-Hakim Bouzid
Practical Considerations for Non-Asbestos Gaskets in Large Diameter Flanges / Anita R. Bausman ; James E. B. Frew
The Use of ISO WD 15848-1 to Qualify Industrial Valves and Different Packing Types Regarding Fugitive Emissions Regulations / Yves Birembaut ; Thierry Ledauphin ; Emmanuel Sauder ; Alain Audrain
Design Method for Bolted Flange Connections of Metal-to-Metal Contact Type / J. Bartonicek ; R. Hahn ; H. Kockelmann ; F. Schockle
Sealing Performance Evaluation Using Gasket Strain Under ROTT/HOTT / Hirokazu Tsuji ; Satoshi Fujihara
Mechanical and Sealing Performances of Gaskets Specifically Manufactured for Use in Metal to Metal Conditions / Jean Cyprien Vignaud
Mathematical Model for Sealing Behavior of Gaskets Based on Compressive Strain / Takashi Kobayashi ; Takahito Nishida ; Yuki Yamanaka
Critical Review of European Standards for Flanged Joints / Jaroslav Bartonicek ; Hans Kockelmann ; Manfred Schaaf ; Friedrich Schoeckle
Failure of Heat Exchanger Gaskets due to Differential Radial Expansion of the Mating Flanges / David Reeves
The Effects of Flange Geometry Changes on the Stress Distribution in Bolted Flanged Joints / Satoshi Nagata ; Yasumasa Shoji
A Finite-Element Based Method for Calculating Metal-to-Metal Type Flange Joints / Robert Kauer ; Wieland Holzer ; Christian Huttner
Finite Element Analyses of Bolt-Up Operations for Pipe Flange Connections / Tomohiro Takaki ; Toshimichi Fukuoka
Valve - Fugitive Emissions Measurement, Test and Qualification Procedures: A New ISO WD 15848 Standard
High Grade Proof for Gaskets According to TA-Luft and VDI 2440 / Th. Klenk ; E. Roos
An Estimation of the Tightness Parameter in the Pipe Flange Connections With Gasket Under Internal Pressure
The Sealing Performance of Box-Shaped Bolted Flanged Joints Using Silicone Sealant Instead of Formed Gasket Under Steady Temperature State / Hiroshi Kawamura ; Masahiro Yoneno
Determination of Gasket Stress Levels During High Temperature Flange Operation
Author Index
On Testing Protocols for Qualifying Flexible Graphite Based Gaskets for High Temperature Petrochemical Services / R. Mueller ; J. R. Payne ; M. Derenne
Stress Analysis and Evaluation of the Sealing Performance in Pipe Flange Connections With Spiral Wound Gaskets Under Internal Pressure (The Effect of the Nominal Diameter of Pipe Flange) / Toshiyuki Sawa ; Naofumi Ogata
Determination of the Mechanical and Thermal Properties of Selected Gasket Types / Warren Brown ; Michel Derenne ; Abdel-Hakim Bouzid
9.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Bray, D. E. ; Ramirez, G.
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 119 p. ; 28 cm
シリーズ名: PVP ; v. 429
所蔵情報: loading…
目次情報: 続きを見る
A Review of Techniques for Nondestructively Characterizing Residual Stress in Metals / G. A. Matzkanin ; H. T. Yolken
Residual Stress Characterization Using X-Ray Diffraction Technique, Applications on Welds / M. Belassel ; M. Brauss ; J. Pineault
Ultrasonic Stress Measurement in Pressure Vessels / D. E. Bray
The Effect of Prior Cold Work on Tensile Residual Stress Development in Nuclear Weldments / D. Hornbach ; P. Prevey
Neutron Diffraction Maps of Stress Concentration Near Notches Under Load at Temperature / J. Root ; J. Katsaras ; J. Porter ; B. Leitch
Nondestructive Evaluation of Stress States in Components Using Ultrasonic and Electromagnetic Techniques / E. Schneider
Enhanced Measurement of Residual Stress by Speckle Correlation Interferometry and Local Heat Treating for Low Stress Levels / M. J. Pechersky ; E. G. Estochen ; C. S. Vikram
Characterization of Stress at a Ceramic/Metal Jointed Interface by the V(Z) Technique of Scanning Acoustic Microscopy / C. Miyasaka ; B. R. Tittmann ; S.-I. Tanaka
Verification of a Technique for Holographic Residual Stress Measurement / M. Steinzig ; G. Hayman ; M. B. Prime
Ultrasonic Measurement of Residual Stress Relaxation in Welded Steel Plates Using Critically Refracted Longitudinal Waves / B. Chance
Potentialities of Ultrasonics for Evaluating Residual Stresses: Influence of Microstructure / H. Walaszek ; H. P. Lieurade ; C. Peyrac
Application of Nondestructive Techniques for Internal Stress Measurements and Monitoring Based on Barkhausen Effect and Other Physical Principles / V. Vengrinovich ; G. Nardoni
Development of a Damage Based Design Criterion for Fiber Reinforced Vessels / P. H. Ziehl ; T. J. Fowler
In-Situ Nondestructive Measurements of Key Mechanical Properties of Oil and Gas Pipelines / F. M. Haggag
Analysis of Eddy Current Current Data Using a Probabilistic Neural Network (PNN) / M. K. Au-Yang ; J. C. Griffith
Applications of Laser-Based Nondestructive Testing (NDT) for Tube/Pipe Inspection / B. Peska
Author Index
A Review of Techniques for Nondestructively Characterizing Residual Stress in Metals / G. A. Matzkanin ; H. T. Yolken
Residual Stress Characterization Using X-Ray Diffraction Technique, Applications on Welds / M. Belassel ; M. Brauss ; J. Pineault
Ultrasonic Stress Measurement in Pressure Vessels / D. E. Bray
10.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Guy Roussel ; contributing editors, J.C. Chen ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  2 v. ; 28 cm
シリーズ名: PVP ; v. 428-1, 2
所蔵情報: loading…
目次情報: 続きを見る
High Level Seismic Response OP Piping / Volume 1:
Introduction / G. C. Slagis
Extreme Seismic Loading: A Comparison Between Tests and Analysis / L. Lazzeri
Seismic Proving Test of Ultimate Piping Strength (Piping Component Test Result and Simplified System Test Planning) / Y. Namita ; K. Suzuki ; H. Abe ; I. Ichihashi ; M. Ishiwata ; K. Yoshino ; K. Tai
The Damping Characteristics of Piping With Plastic Deformation: Part 2 / A. Otani ; I. Nakamura ; N. Ogawa ; M. Shiratori
Collapse Failure Considerations for Piping Seismic Loads
Some Comments About the Design of Piping Under Extreme Loading Conditions
Experimental Verification of Frequency: Modal Properties of WWER 440/213 and WWER 1000/320 Primary Coolant Loops With Installed Viscous Dampers / L. Pecinka ; P. Macak ; M. Tanzer ; VI. Zeman ; J. Dupal ; J. Stych
Seismic Response Analysis of Piping Systems With Nonlinear Supports Using Differential Algebraic Equations / K. Fujita ; T. Kimura ; Y. Ohe
The 2000 Forum on Appropriate Criteria and Methods for Seismic Design of Nuclear Piping
Seismic Evaluation of Systems, Structures, and Components
Observations of Waste Tank Behavior and Implications for Future Design / T. W. Houston ; G. E. Mertz
Seismic Soil Pressure Distribution on Walls of a Bermed Structure on a Layered Site / S. R. Jensen ; G. K. Miller ; P. J. Rieck
Seismic Analysis and Design of Vertical Pressure Vessels: A Comprehensive Study Using Structural and ASME Codes / G. Anagnostidis ; N. Kokkavessis
Seismic Response of Machines With Rotating Parts / T. Kubr ; P. Zeman
Design of Earthquake Resistant Server Computer Structures / B. D. Notohardjono ; J. Wilcoski ; J. Gambill ; D. Porter ; U. Jourdan ; D. Linkstrom ; S. Mcintosh
DQEM Vibration Analyses of Nonprismatic Shear Deformable Beams Resting on Elastic Foundations / C.-N. Chen
A Study of Free Lift-Off Induced Slip Behavior of a Rectangular Rigid Body / T. Taniguchi ; T. Murayama
Determination of Effective Damping and Stiffness of Hysteresis Structures by Describing Functions / S. C. Chung ; C. S. Tsai ; J.-S. Huang
Seismic Evaluation Procedure for Glove Boxes at U.S. Department of Energy Facilities / S. C. Lu
Nonlinear Seismic Responses of Container Crane Including Contact Problem Between Wheel and Rail / N. Kobayashi ; T. Honda ; M. Watanabe ; H. Kuribara ; A. Kashiwazaki
Study on Energy Measurement Method for Structural Responses in Shaking Table Tests / S. Fujita ; O. Furuya ; Y. Niitsu ; T. Mikoshiba ; S. Fujimura
Identification of System Parameters of Structures by Using Wavelet Transform of Observed Input and Acceleration Response / A. Sone ; A. Masuda ; H. Hata
Study on Measurement Method for Structural Fracturing Process in Shake Table Tests Using Image Processing / S. Aikawa
Seismic Structures Response and Interaction Effects
Comparisons of Numerical Analyses and Recorded Data in Tseng-Wen Dam During 1022 Chiayi Earthquake / T. S. Hsu ; C.-S. Chen ; Y.-J. Wei ; B.-J. Chen ; C.-J. Li
Multipole Expansion Technique for Wave Scattering by Buried Objects in an Elastic Half-Space / C.-S. Yeh ; T.-J. Teng ; W.-I. Liao
Model of Transmission Tower-Pile-Soil Dynamic Interaction Under Earthquake: Out-of-Plane / H.-N. Li ; S.-Y. Xiao ; S.-Y. Wang
Analytical and Experimental Study of Structures Equipped With Combined Velocity-Dependent and Displacement-Dependent Devices / K.-C. Chen ; C.-L. Ho ; C.-W. Chang
Experimental Study of Full Scale Structures Equipped With RADAS Devices Under Near-Source Seismic Excitations
An Improved Integration Algorithm for the Solution of Shock Response / S.-Y. Chang
Seismic Responses of Building and Bridge Structures Subjected to Near-Fault Earthquake Ground Motions
Seismic Testing and Analysis Verification
Development of the Control Method of Shaking Table for Collapse Test / Y. Okuda ; A. Maekawa ; C. Yasuda ; M. Sakuno
Study on Control Designs for Seismic Tests Combined With Real Time Numerical Simulator / S. Kajii ; T. Hiroe ; T. Yamashita
Development of Numerical Dynamic Simulators for a Big Size Shaking Table / T. Harada ; H. Shibata
Improvement of Shaking-Table Control by Real-Time Compensation of the Reaction Force Caused by a Non-Linear Specimen / Y. Dozono ; T. Horiuchi ; H. Katsuma ; T. Konno
Experiment of Suppressing Sloshing Motion of Water Tank by Shaking Table Control / K. Kajiwara ; Y. Shinohara ; N. Shimizu
Development of a Mechanical Simulator for Structural Failure Testing During Earthquake Base Excitation (for Study of Developing Effective Control Method of a 3-D Full Scale Shaking Table) / E. Sato ; T. Mura
Evaluation of Earthquake-Proof Safety Design of Plant Structure and Methods of Applying the Ultimate Strength of Pipe Racks to Earthquake-Proof Safety Design on Plant Assurance / T. Makita ; T. Hasegawa ; H. Anzai ; K. Yoshida ; H. Asakawa ; H. Sakagami ; T. Nakamura ; S. Ochiai
Author Index
Earthquake Damages and Earthquake Ground Motions / Volume 2:
A Compass for Selecting Evaluation Methods for Design-Based Scenario Earthquake Input to Structures / K. Ishida
Report on Damage and Failure of Oil Storage Tanks Due to the 1999 Chi-Chi Earthquake in Taiwan / S. Yoshida ; S. Zama ; M. Yamada ; T. Tahara
Characteristics of Long-Period (2-20 sec) Strong Ground Motion and Sloshing of Oil Storage Tanks Due to the 1999 Chi-Chi, Taiwan Earthquake / R. Inoue ; Y. Tajiri ; K. Hatayama ; M. Endo
Ground Motion Directivity Inferred From Minaret Damage During the 1999 Kocaeli and Duzce, Turkey Earthquakes / M. Motosaka ; A. Somer
A Study on Earthquake Responses of Steel Tower With Additional Damping / T. Mazda ; H. Otsuka ; H. Uchida ; S. Ikeda
Innovative Anti-Seismic Techniques
Development of 3-Dimensional Base Isolation System With Coned Disk Spring / T. Somaki ; T. Nakatogawa ; A. Miyamoto ; K. Sugiyama ; Y. Oyobe ; K. Tamachi
Evaluation of Response of Three-Dimensional Base Isolation Based on Mechanical Properties of Thick Rubber Bearings / S. Yabana ; A. Matsuda
Study on Seismic Mounting With Rolling and Sliding Contact at Taper Contact Surface / M. Muneyasu ; K. Ishii ; T. Koizumi
Study on Motion Analysis of Pendulum Isolation Systems During Earthquakes (Dynamic Test on a 3-Storey Steel Frame Model Supported by 4 Friction Pendulum Bearings) / S. Okamura ; K. Hayakawa ; H. Funaki ; M. Ikenaga ; T. Aramizu
A Design Procedure for Isolated Structures With High Damping Rubber Bearings / T.-C. Chiang
A Feasibility Study of an Application of Damping System for Interconnected Structures to APWR Nuclear Power Plant Buildings / T. Kawasato ; J. Yamada ; S. Ikutama ; M. Kageyama ; Y. Takeuchi ; S. Takami
Control with Active and Passive Damping
Experimental Investigation on Steel Structures Equipped With Fluid Viscous Damper
Experimental Study on Ball Screw Type Magnetic Friction Damper: Semiactive Control Using Electromagnet / T. Watanabe ; F. liyama ; H. Sodeyama
Development of Large Capacity Semi-Active Vibration Control Device Using Magneto Rheological Fluid / K. Sunakoda ; J. D. Carlson ; B. F. Spencer, Jr
A Basic Study on Dynamic Characteristics of MR Dampers
Development and Application of the Innovative Anti-Seismic Techniques: Part 1--New Activities in Progress at ENEA, Italy, in the Framework of International Collaborations / A. Martelli ; M. Forni ; G.-B. Arato ; A. Poggianti ; B. Spadoni ; A. Welponer
Development and Application of the Innovative Anti-Seismic Techniques: Part 2--New Activities in Progress at ENEA, Italy, in the Framework of National Collaborations / M. Indirli ; A. Marioni ; A. Bertocchi ; C. Capelli ; A. Procaccio
Seismic Nonlinear Response of Passive-Control Buildings / W. Pong
Student Papers
Theoretical and Experimental Study of High Damping Rubber Bearings / S.-B. Lin
Vibration Control of Structure Considering Stroke Constraint of Auxiliary Mass of TMD / S. Fukuzumi ; D. Iba
High Level Seismic Response OP Piping / Volume 1:
Introduction / G. C. Slagis
Extreme Seismic Loading: A Comparison Between Tests and Analysis / L. Lazzeri
11.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Warke, R. W. (Robert W.) ; Bamford, W. H. (Warren H.) ; Rodgers, Douglas ; Cohn, M. J. ; Dong, P. (Pingsha)
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 147 p. ; 28 cm
シリーズ名: PVP ; v. 427
所蔵情報: loading…
目次情報: 続きを見る
Service Experience in Operating Nuclear Plants
A Fracture Mechanics Evaluation of Observed Cracking in a Recirculation Pump Shaft / H. S. Mehta
An Analysis of Thinning Status for Feeder Pipes in Korean CANDU Plants / S. Jegarl ; H.-S. Chung ; S.-H. Lee
Flaws in Vessel Cladding and Their Potential Contributions to Vessel Failure Probabilities / F. A. Simonen ; S. R. Doctor ; G. J. Schuster ; D. A. Jackson ; L. Abramson
Development of the Technical Basis for Plant Startup for the V. C. Summer Nuclear Plant / G. Moffat ; W. H. Bamford ; K. R. Hsu ; L. Tunon-Sanjur ; D. Seeger ; D. C. Bhomick
Service Experience in Fossil Fuel Plants
Introduction / Marvin J. Cohn
Effect of Operation Temperature on Life Consumption for 1 1/4Cr-1/2Mo-Si and 2 1/4Cr-1Mo Materials / M. J. Cohn
Root Cause Failure Assessment of the Waterwall Tubing at Newington Station, Unit 1 / F. V. Ellis ; S. Tordonato ; M. R. Latour
Weld Residual Stresses and Fracture
Numerical Investigations of the Residual Stresses for the Fracture Assessment of a BWR Pump Nozzle / Pingsha Dong ; Frederick W. Brust ; E. Keim ; P. Palagyi
Stress Intensity Factor Solutions for Welded Joints Subjected to Weld Residual Stresses / P. Dong ; J. K. Hong
A New Mesh-Insensitive Procedure for Characterizing Stress Concentration at Welds / Z. Cao
Residual Stress and Deformation of Narrow Groove Welding / R. Sumiya ; M. Asano
Fabrication and Performance
Influence of Weld Defects on Very Low Cycle Fatigue Properties of Welded Joints / Robert W. Warke ; Y. Kayamori ; A. Seto ; T. Masuda ; S. Machida ; C. Miki
Specimen Size Effect on the Creep-Fatigue Life of a Weld Joint in 2.25Cr-1Mo Steel / T. Ogata
Creep-Rupture Properties of Modified 9Cr-1Mo Weld Metal / W. H. Zielke
Influence of Gas Type on the Mechanical Properties of Heat Affected Zone During Oxyfuel Cutting of Carbon Steel / P. Munoz-Escalona ; M. C. Payares ; T. Ascanio
Empirical Model of Grinding for the Prediction of Roughness on Stainless Steels / Z. Cassier ; O. Zurita
Author Index
Service Experience in Operating Nuclear Plants
A Fracture Mechanics Evaluation of Observed Cracking in a Recirculation Pump Shaft / H. S. Mehta
An Analysis of Thinning Status for Feeder Pipes in Korean CANDU Plants / S. Jegarl ; H.-S. Chung ; S.-H. Lee
12.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M.D. Rana ; contributing editors, Y. Hari ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  vi, 231 p. ; 28 cm
シリーズ名: PVP ; v. 419
所蔵情報: loading…
目次情報: 続きを見る
Plastic Analysis in Pressure Vessel Design
Introduction / Arturs Kalnins
Comparison of Limit Analysis Results and Code Rules for the Design of Unreinforced Openings in Cylindrical Vessels / W. Reinhardt
Shakedown Check for Pressure Vessels Using Plastic FEA / A. Kalnins
Recent Advancement on the Draft of Alternative Stress Evaluation Criteria in Japan Based on Partial Inelastic Analyses / A. Okamoto ; I. Nishiguchi ; M. Aoki
Verification of Alternative Stress Evaluation Criteria and Code Elastic Limits for Primary Plus Secondary Stress / Y. Yamamoto
Evaluation of Conservativism in the Simplified Elastic-Plastic Analysis Using Analytical Results - Part 2: Proposal of a New Ke Function / S. Asada ; T. Nakamura ; Y. Asada
Fatigue Analysis of Pressure Vessels by Twice-Yield Plastic FEA
Nonproportional Low Cycle Fatigue Lives of Type 304 Stainless Steel and 6061 AI Alloy Under 14 Loading Paths at Room Temperature / T. Itoh ; M. Sakane ; N. Hamada
Nonproportional Low Cycle Fatigue Lives of Type 304 and 316FR Stainless Steels Under Fifteen Strain Paths at High Temperature
Environmental Fatigue Issues
Comparison of Japanese MITI Guideline and Other Methods for Evaluation of Environmental Fatigue Life Reduction / David P. Jones ; Sumio Yukawa ; Makoto Higuchi ; K. Iida ; T. Bannai ; M. Higuchi ; K. Tsutsumi ; K. Sakaguchi
The Impact of ASME Section XI Appendix L Inspections on Piping Reliability / F. A. Simonen ; S. R. Gosselin
Study of Fatigue and Fracture on Carbon Steel Pipes With Small Crack in Nuclear Power Plants / H. Ueda ; K. Hosaka ; C. Arata
Effects of Water Flow Rate on Fatigue Life of Carbon Steel in Simulated LWR Environment under Low Strain Rate Conditions / A. Hirano ; M. Yamamoto ; T. Shoji
Fatigue Crack Growth Behavior of Surface Crack in Low-Carbon Stainless Steel, SUSF316(NG) in Simulated BWR Water Environment / K. Miyazaki ; K. Saito
Environmentally Assisted Cracking of Alloys 600 and 690 in Simulated LWR Water / O. K. Chopra ; W. J. Shack
Fatigue Behavior of Stainless Steel Under Conditions of Changing Strain Rate in PWR Primary Water / T. Dodo ; H. Kanasaki ; S. Nomoto ; Y. Minami
Effects of Strain Rate Fluctuation and Strain Holding on Fatigue Life Reduction for LWR Structural Steels in Simulated LWR Water
Structural Integrity of Pressure Components
Finite Element Analysis of Corrugated HDPE Underground Pipe Culverts / Yogeshwar Hari ; Dilip Bhavnani ; M. Kamaraj ; Y. Hari
Finite Element Analysis and Design of a Feed Hopper / L. F. Tellone
Failure Investigation and Analysis of the Centrifuge Input Gear Shaft
Impact on Performance of Piping and Support Analysis in Light of New NRC Guidance Issued to Perform Changes to Operating Nuclear Plants / D. Bhavnani
What's New in the ASME Code?
What's New in ASME Section I / Allen Selz ; J. R. MacKay
What's New in ASME Section II, Materials / M. Gold
What's New in ASME Section IX / J. Feldstein
Recent and Potential Future Changes in ASME B31.3 / C. Becht, IV
The New Section XII, Transport Tanks of the ASME Boiler and Pressure Vessel Code / A. Selz
Alternate ASME Rules for Bolted Flanged Joints Based on Tightness / R. W. Mikitka
What's New in ASME Section III / R. A. Barnes ; C. J. Pieper
The Development of a New Pressure Vessel Code for ASME / D. A. Osage
What's New in ASME Section VIII / T. P. Pastor
PED Compliance: Meeting the Challenge Using the ASME Code
An Overview of PED: How it Operates and Differs From US Practice / B. L. Lubin ; A. F. Garbolevsky
A Brief, Practical Guide to PED Fabricating Using the ASME Code as a Design Standard / W. Smith
ASME and Other Materials Roles in the 97/23/EC PED Harmonized Material Lists / M. J. Porfilio
Meeting the EC Requirements for Pressure Vessels / M. Thompson
Author Index
Plastic Analysis in Pressure Vessel Design
Introduction / Arturs Kalnins
Comparison of Limit Analysis Results and Code Rules for the Design of Unreinforced Openings in Cylindrical Vessels / W. Reinhardt
13.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Les Antalffy, Leo Picqueur
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  v, 94 p. ; 28 cm
シリーズ名: PVP ; v. 418
所蔵情報: loading…
目次情報: 続きを見る
Effects on Autofrettaged Vessels
Effect on Residual Stress Distribution in an Autofretteged Thick-Walled Cylinder Due to Machining of a Cross-Bore / Amer Hameed ; R. D. Brown ; John Hetherington
A Study of the Effect on Residual Stress Distribution in an Autofrettaged Thick-Walled Cylinder of Varying the Diameter of a Cross-Bore
What About Re-Autofrettage? / N. Wayne Walkup
Effects of Mouth Closure and Fluid Entrapment on Fatigure Crack Propagation in Thick-Walled Autogrettaged Cylinders / A. Kiciak ; D. J. Burns ; G. Glinka
The Effect of Autofrettage on Uniform Arrays of 3-D Unequal-Depth Cracks in a Thick-Walled Cylindrical Vessel / M. Perl ; B. Ostraich
Analysis
An Elastic-Perfectly Plastic Analysis of a Nozzle in a Monobloc Vessel With External Loads / George A. Miller ; Kenneth D. Kirkpatrick ; Jeff A. Pfeifer ; Leslie P. Antalffy
Functional and Safety Analysis of an Optimised High Pressure Flange Design for Jacketed Tubes in LDPE Reactors / Peter Korner ; Waldemar Hiller ; Rolf Wink
A Case Study of Cycle Life Calculated Based on Fatigue Life and Fracture Mechanics / Daniel T. Peters ; Patrick Speranza
Fatigue Evaluation Method of Brazed Aluminum Heat Exchanger for High Pressure Use / Susumu Terada ; Koji Noishiki ; Yukihiro Fukada ; Shinichi Miura
Flaw Evaluation and Creep Crack Growth
Evaluation of Corroded and Artificially Flawed Vessels / Hideo Kobayashi ; Takeshi Ogawa ; Shouza Yanagida
The Influence of Residual Stress on Creep Crack Growth Under Ductile Creep Conditions / K. Nikbin
Comparison of Fatigue Crack Growth Equations for Use in ASME BandPV Code Section VIII, Division 3 / Joseph A. Kapp ; Jan G. M. Keltjens
Author Index
Effects on Autofrettaged Vessels
Effect on Residual Stress Distribution in an Autofretteged Thick-Walled Cylinder Due to Machining of a Cross-Bore / Amer Hameed ; R. D. Brown ; John Hetherington
A Study of the Effect on Residual Stress Distribution in an Autofrettaged Thick-Walled Cylinder of Varying the Diameter of a Cross-Bore
14.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Vladimir Kudriavtsev, Satoyuki Kawano ; contributing editor, Chris R. Kleijn
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  2 v. ; 28 cm
シリーズ名: PVP ; v. 424-1, 2
所蔵情報: loading…
目次情報: 続きを見る
CFD of Industrial Multiphase Flows / Volume 1:
Numerical Study on Thermal Hydraulic Phenomena in a Hemispherical Gap Under Core Meltdown Accident / A. Uchibori ; K. Fukuda ; K. Morita ; T. Matsumoto
Numerical Simulation of Disperse Multiphase Flows With an Application in Power Engineering / K. Bernert ; Th. Frank ; H. Schneider ; K. Pachler
Coupled Fluid-Structure Interaction Simulation of the Opening of the Target Rock Vacuum Relief Valve / A. J. Reich ; V. Parthasarathy ; A. DiMeo
Particle Flow Around an Oscillating Circular Cylinder Based on Two-Fluids Model / K. Tsuboi ; S. Kimura
An Investigation of Simple Evaporation Models Used in Spray Simulations / G. F. Yao
Numerical Simulation of Condensing Real Gas Flows / F. Put ; P. H. Kelleners ; R. Hagmeijer ; H. W. M. Hoeijmakers
Progress Toward Development of a Robust CFD Code for Simulation of Spray Cooling in Steam Conditioning Devices / K. Schoonover ; S. I. Abdel-Khalik
Detailed Modelling of Liquid/Solid Flows With Applications to Food Processing / Ch. Duchanoy ; Th. R. G. Jongen
Applicability of Modified Drift Flux Model for 3-D Channel Bubbly Flow With a Rod Inserted / N. Kamesako ; R. Akasaka ; K. Nakagawa ; A. Hotta
An Extension of the Preconditioned Advection Upstream Splitting Method to Two-Phase Flows for the 3D Calculation of Circulating Fluidized Bed Flow Patterns / J. De Wilde ; J. Vierendeels ; G. J. Heynderickx ; G. B. Marin ; B. Merci ; A. K. Das ; E. Dick
Two-Fluid Model Simulations of an Internal Airlift Loop Reactor / R. F. Mudde ; H. E. A. Van Den Akker
Numerical Study on Hydrodynamics of Anti-Down-Slipping Riser / S.-D. Hou ; X.-X. Zhong ; K.-J. Xu ; S.-N. Li ; X.-L. Yu
CFD of Complex 3D Flows
Simulations of Engineering Thermal Turbulent Flows Using a Lattice Boltzmann Based Algorithm / Ch. G. Alexander ; H. Chen ; S. Kandasamy ; R. A. Shock ; S. R. Govindappa
Analysis of Coupled Internal-External Flows and Ventilation in a Generic Passenger Car / A. Alexandrov ; V. Kudriavtsev ; M. Reggio
The Digital Flowbench: An Automated and Web Enable CFD Solution for Cylinder Head Design / R. Miller ; G. Strumolo ; P. MacNeille ; D. Strenski
The Comparison of Performance of the Menter Shear Stress Transport and Baldwin-Lomax Turbulence Models With Respect to CFD Prediction of Losses in HP Axial Turbine Stages / P. Lampart ; J. Swirydczuk ; A. Gardzilewicz ; S. Yershov ; A. Rusanov
Predicting Air Flow Distribution in PCBs Using Direct Simulation: The Next Generation of CFD / K. Azar ; J. Halliday
Secondary Flows in a Rotating Serpentine Circular Duct / T. S. Laker ; S. M. Ghiaasiaan ; J. R. Muller
Visualization of Vortical Flow by Restricted Line Integral Convolution / K. Koyamada ; H. Kotera ; A. Doi
CFD and Chemical Processes
Development, Implementation, and Application of Reduced Chemistry in CFD
Simulations of Large Scale Combustion Systems / M. A. Cremer ; D. H. Wang ; C. J. Montgomery ; M. K. Denison
Using a New Kinetic Reduction Technique Inside Fluent to Compute Combustion in a Domestic Burner / M. Embouazza ; O. Gicquel ; D. Thevenin ; N. Darabiha
Boundary Layers With Mass Transfer on Spinning Fibers / R. Kickinger ; Ph. Gittler
Fiber Cooling Modelisation During Draw Using CFD / D. Tschumperle ; M. Nicolardot
SpinExpert: The Digital Expert for the Analysis and Design of Fiber Spinning Operations / D. L. Davidson
Modelling of Turbulent Impinging Jet Flames / W. T. Chan ; T. J. Craft ; Y. Zhang
Turbulence Modelling in a Single Normally Impinging Jet / L. Thielen ; K. Hanjalic ; R. Manceau ; H. Jonker
Applying CFD for the Design and Evaluation of Laboratory Combustor / J. S. Bae
Heat Transfer From Laminar Impinging Methane/Air Flames / C. R. Kleijn
Numerical Simulation of Combustion Chemical Vapor Deposition of Ba[subscript x]Sr[subscript 1-X]TiO[subscript 3] Thin Films / J. Amaya ; M. Oljaca ; S. Menon
Author Index
CFD for the Process Industry / Volume 2:
Applications of Lattice-Boltzmann Based Large-Eddy Simulations (Keynote) / J. J. Derksen
On the Use of Ultrasound in Chemistry: Modelling of Sonoreactors / G. Servant ; J.-L. Laborde ; A. Hita ; J.-P. Caltagirone ; A. Gerard
Simulation and Measurement of the Turbulent Flow in a Monolithic Stirred Tank / H. P. Kritzinger ; H. E. A. van den Akker
Modelling of Parallel Competitive Reactions in Isotropic Homogeneous Turbulence Using a Filtered Density Approach for Large Eddy Simulations / E. van Vliet
CFD for Fluid-Structure Interaction
Characteristics of Fluid-Structure Thermal Interaction Phenomena at a T-Junction of Liquid Metal Fast Reactor Piping Systems / T. Muramatsu
Compact Modeling for Thermal Simulation Using Response Surface Methodology / M. Kuzuno ; T. Nishio
Case Study of Transient Conduction in Support Cylinders for Steel Industry / A. H. Neto ; M. R. Tavares ; T. N. Lippi
Heat Transfer Simulation of Seamless Tube Rolling / F. McKenty ; L. Gravel ; M.-A. Ladron de Guevara
The Role of Computational Technologies in Solving a Fluid Induced Piping Vibration Problem / D. E. Botha ; G. N. van Zyl ; J. K. Roux
On the Solution of Conservation Equations for Hydraulic Pipe Flow With Cavitation / M. Beck ; H.-K. Iben ; U. Iben ; N. Mittwollen ; C.-D. Munz
Dynamic Modeling of Surging Pressure Pulsation in Delivery Flow of Hydraulic Piston Pump and Development of New Flow Circuit Mechanics / T. Tsuta ; T. Umeda ; T. Iwamoto ; M. Kume
Modeling and Simulation of Leaks in Pipelines / Y. A. Khulief ; H. E. Emara-Shabaik ; I. Hussaini
Direct Constrained CFD-Based Optimisation of 3D Blading for the Exit Stage of a Large Power Steam Turbine
CFD of External Flows
Aerodynamic and Fluid-Structure Interactions of Multiple Parachute Canopies (Keynote) / T. Tezduyar ; V. Kumar ; S. Sathe ; K. Stein ; R. Benney ; E. Thornburg ; C. Kyle ; T. Nonoshita
Numerical Calculation of Viscous Flow Around Complex Aircraft Configurations Using Hybrid Unstructured Grids / R. K. Hold
Computational Studies of Active Control of Boundary Layer Separation / M. P. Patel ; A. B. Cain
Computational Study of Micro-blowing for Shear Force Reduction / M. J. Braun ; R. C. Hendricks
Various Industrial CFD Applications
Computational Fluid Dynamics (CFD) Design of a Hand-Drying Device / J. T. Brown ; G. P. Huang ; W. C. M. Kelly ; G. R. Furnish
Natural and Mixed Convection Around a Cylinder Enclosed With Porous Media: A Numerical Study on Comfort of Clothed Human Being / Q. Bo ; T. Nakajima
Stochastic Estimation of Porous Media Properties / H.-W. Lao ; H. J. Neeman ; D. V. Papavassiliou
Computational Investigation Into Particulate Material Removal in a Hot Gas Filtration / M. H. Al-Hajeri ; K. Y. Al-Fahaid ; A. Aroussi ; S. J. Pickering
Molecular Dynamics Simulation of Alkane Adsorption Process in Carbonaceous Adsorbents / X. Wang ; M. Jia ; H. Hiyama ; H. Hashimoto
Plasma Torch Interaction With a Melting Interface: Work in Progress / S. D. Hill ; P. V. Desai
Phoenics Simulations of Gas-Liquid Flows in Large Piping Components Related to Nuclear Safety Assessment / M. An ; W. Thompson ; M. Wright ; V. Agranat ; M. Kawaji ; A. M. C. Chan
Simulation of Bubble Rise and Deformation in Liquid Using a Front Tracking/Finite Difference Method / J. Hua ; J. Lou ; K. Murali ; K. H. Lee ; K. Kumar
Domain Decomposition Method for Numerical Simulation of Fluid Flows in a T-Junction / R. Huang ; B. Huan ; S. Zhang
Computational Fluid Dynamics Analysis of a Blood Sampling Device / D. P. Ranjan ; C. Knapp
Computational Design of VFP Type Artificial Heart by Unstructered Grid / T. Kato ; S. Kawano ; K. Nakahashi ; T. Yambe ; S.-I. Nitta
Simplified Simulation of Dynamic Liquid Pressure in Rectangular Vessels / H.-N. Li ; Y. Jia ; S.-Y. Wang
Computational Analysis of 3D Fluid Flow and Pressure Forces in a Spiral Groove Seal
Numerical Simulation of Water Flow Around Ship With Screw Propeller / A. Aksenov ; V. Pokhilko ; A. Dyadkin
Mathematical Modeling of Turbulent Flow Control by Using Wall Jets and Polymer Additives / E. A. Shkvar
CFD of Industrial Multiphase Flows / Volume 1:
Numerical Study on Thermal Hydraulic Phenomena in a Hemispherical Gap Under Core Meltdown Accident / A. Uchibori ; K. Fukuda ; K. Morita ; T. Matsumoto
Numerical Simulation of Disperse Multiphase Flows With an Application in Power Engineering / K. Bernert ; Th. Frank ; H. Schneider ; K. Pachler
15.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M.J. Pettigrew ; contributing editors, E. de Langre ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2001  2 v. ; 28 cm
シリーズ名: PVP ; v. 420-1, 2
所蔵情報: loading…
目次情報: 続きを見る
Cross Flow, Heat Exchangers / Volume 1:
Introduction / M. J. Pettigrew ; E. de Langre ; T. Nakamura ; S. J. Price ; D. S. Weaver
Heat Exchanger Vibration Analysis
A Study of Flow Induced Vibration Failures in a Large Heat Exchanger / Zia Abdullah ; P. Feenstra ; P. Gorog ; J. Keiser ; R. Swindeman ; G. Aramayo
Simplified Method for Predicting Vibration and Fretting-Wear in Nuclear Steam Generators / Stephen M. Fluit ; Michel J. Pettigrew
Flow Induced Vibration Analysis of Once Through Steam Generator Tube Bundles / Anca Hatman ; Richard Klarner
A Simple Approach to Estimate Fretting-Wear Damage in Heat Exchanger Tubes: Verification and Validation / M. Yetisir
Fluid-Elastic Instability Prediction of Steam Generator Tubes for Operation at Reduced Temperature (ORT) / S. N. Choi ; K. S. Yoon ; T. S. Choi ; S. K. Park
Vortex Shedding
A Nonlinear Dynamics Analysis of Vortex-Structure Interaction Models / N. W. Mureithi ; S. Goda ; H. Kanki
Flow-Induced In-Line Oscillation of a Circular Cylinder in a Water Tunnel / Atsushi Okajima ; Takashi Kosugi ; Akira Nakamura
Experimental Study on the Avoidance and Suppression Criteria for the Vortex-Induced Vibration of a Circular Cylinder / Takaaki Sakai ; Masaki Morishita ; Koji Iwata ; Seiji Kitamura
A Linear Analysis of the Free Vibration of a Fix-Supported Elastic Cylinder in a Crossflow / S. J. Xu ; Y. Zhou ; R. M. C. So
Cylinder Arrays
Feedback Control of Vortex Shedding From Two Tandem Cylinders / D. Wolfe ; S. Ziada
A Study on Fluid Excitation Forces Acting on a Rotated Square Tube Bundle of T/D = 3.1 in Cross Flow / Fumio Inada ; Kimitoshi Yoneda ; Akira Yasuo ; Takashi Nishihara
The Effect of Platen Fins on the Flow-Induced Vibrations of an In-Line Tube Array / Z. Sun
A Measurement of Fluid Forces on Cruciform Cylinders in Cross-Flow / Tsuyoshi Hagiwara ; Masanobu Watanabe ; Noboru Saito ; Shinichi Kawamura ; Norimichi Yamashita
Fluidelastic Instability
Experimental and Theoretical Investigations of the Influence of Upstream Turbulence on the Stability Boundaries of a Single Flexible Tube in a Bundle / M. Rottmann ; K. Popp
An Investigation on the Use of Connors' Equation to Predict Fluidelastic Instabilities in Cylinder Arrays / Stuart J. Price
Active Vibration Control for the Measurement of Fluidelastic Effects / Sebastien Caillaud ; Emmanuel de Langre ; Franck Baj
Qualification of Motion Dependent Fluid Force Coefficients for Simulation of Flow Induced Vibrations / A. Gosse ; A. Adobes ; C. Baratte
Two-Phase Flow
Vibration Behaviour of Rotated Triangular Tube Bundles in Two-Phase Cross Flow / V. P. Janzen ; C. E. Taylor ; T. Whan
Non-Linear Vibrations of the Tube Bend Region of a PWR Steam Generator: An Experimental and Numerical Approach / J. L. Laszlo ; J. Charpentier ; C. Phalippou ; L. Guinoiseau
An Attempt to Study the Correlation Between Air/Water Flow Fluctuations and Random Buffeting Forces / Sylviane Pascal-Ribot ; F. Le Gall ; J. Leblond
An Advanced Method to Estimate Fluidelastic Instability of Steam Generator U-Bend Tube Bundle / Tomomichi Nakamura ; Tadahiko Suzuta ; Ken-ichi Tomomatsu ; Mutsuo Takai ; Toshihiko Iwase ; Sei-ichi Uwagawa ; Haruki Madarame ; Takuzo Iwatsubo ; Takamoto Saito|p167
Analytical and Numerical Modelling
A Numerical Simulation and Vortex Structures of In-Line Oscillation of an Elastically Supported Circular Cylinder
Physical Consideration in Practical Use of Numerical Simulation for a Vortex-Induced Vibration of a Single Circular Cylinder / Katsuhisa Fujita ; Taro Nakamura
Dispersion Relation and Stability Analysis of Flow-Induced Wave of a Flexible Circular Ring Subjected to Swirling Fluid Flow / Masahira Watanabe ; Nobuyuki Kobayashi
A Simplified Linearized Model for the Fluid-Coupled Vibrations of Spent Nuclear Fuel Racks / Miguel Moreira ; Jose Antunes
Author Index
Axial Flow, Piping Systems, Other Topics / Volume 2:
Fretting-Wear and Nuclear Fuels / N. J. Fisher ; M. K. Au-Yang ; R. W. Motriuk
Effect of Grid-Support Design on Zirconium Alloy Fuel Rod Fretting: Wear Behavior / Steven J. King ; David D. Seel ; Nigel J. Fisher ; Fabrice M. Guerout
An Experimental Study of Friction During Planar Elastic Impact / Edward E. Osakue ; Robert J. Rogers
Flow Induced Vibration Analysis of PWR Fuel Rods Validated From a Variety In-Loop Tests / Jean Rigaudeau ; Etienne Morel
The Flow Field in a Reactor Core and Its Effect on Rod Vibration and Wear / D. V. Paramonov ; M. Y. Young ; J. X. Jiang
Nuclear Fuel Assembly Flow-Induced Vibration and Endurance Testing / R. Y. Lu ; M. E. Conner ; M. L. Boone ; C. L. Wilbur ; R. Marshall
Axial Flow
Areodynamic Vibration of Combined Rigid Bodies Due to Leakage Flow (The Effect of Body Shapes and Support Condition) / Shigehiko Tanaka ; Takashi Hirata ; Shigehiko Kaneko ; Tatsuo Watanabe
A Nonlinear Model for Squeeze-Film Dynamics Under Axial Flow / Philippe Piteau
Improvements and Extended Validation of an Analytical Model for Fluidelastic Forces in Rod Bundles Subjected to Axial Flow / Regis Nhili ; Tim Kestens ; Emmanuel Viallet ; Jean Laurent Sage
Analysis for Fluid Damping of a Structure Surrounded by Liquid in a Narrow Gap / Hideyuki Morita ; Kazuo Hirota ; Tomohiro Ito ; Kiyoshi Nambu ; Shigeyuki Watanabe ; Satoshi Yonemoto
Application of Large Eddy Simulation to a Flow Induced Vibration Problem / Elisabeth Longatte ; Dominique Laurence ; Francois Barre ; Pierre Ledac
Piping Systems and Acoustics
Avoiding Thermoacoustic Vibration in Burner/Furnace Systems / Frantisek L. Eisinger ; Robert E. Sullivan
Vibration Investigation of a French PWR Power Plant Piping System Caused by Cavitating Butterfly Valves / P. Moussou ; S. Cambier ; D. Lachene ; S. Longarini ; L. Paulhiac ; V. Villouvier
Acoustic Modes in Heat Exchangers / H. G. D. Goyder
Parametric Vibrations of Flexible Bellows in Piping System Subjected to Dynamic Inner Fluid Pressure Excitation / Yuichi Wada ; Masahiro Watanabe ; Hirohito Ito
Simultaneous Optimal Design of Structural and Control Systems for Cantilevered Pipes Conveying Fluid / Kazuhiko Hiramoto ; Hitoshi Doki
Compressors and Other Topics
Acoustic Fatigue of Impellers of Rotating Machinery
Performance Assessment of a Centrifugal Compressor Surge Control System With Cooling / Blair J. Martin
A Study of Discharge Flow From Vibrating Sluice Gates for Calculating Hydrodynamic Pressure / Akinori Nakata ; Noriaki Ishii ; Kohji Tokushima ; Keiko Anami ; Ichishi Kusano
Rapid, Wide-Field Measurements of Complex, Transient Shell Vibrations / Roman W. Motriuk ; Timothy Schmidt
Cylindrical Shells
Dynamic Analysis of Anisotropic Cylindrical Shells Containing Flowing Fluid / M. H. Toorani ; A. A. Lakis
Axial Leakage Flow-Induced Vibration of a Thin Cylindrical Shell With Respect to Axisymmetric Vibration / Atsuhiko Shintani ; Mazakazu Ono
Axial Leakage Flow-Induced Vibration of a Thin Cylindrical Shell With Respect to Lateral Vibration / Masakazu Ono
Vibration of Prestressed Orthotropic Cylindrical Shells Conveying Fluid / Yong Liang Zhang ; Jason M. Reese ; Daniel G. Gorman
Cross Flow, Heat Exchangers / Volume 1:
Introduction / M. J. Pettigrew ; E. de Langre ; T. Nakamura ; S. J. Price ; D. S. Weaver
Heat Exchanger Vibration Analysis
16.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Wing L. Cheng, Shigeru Itoh ; contributing editors, M'Hamed Souli ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  viii, 327 p. ; 28 cm
シリーズ名: PVP ; v. 460
所蔵情報: loading…
17.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Dominique Moinereau ; contributing editors, Kenneth K. Yoon, Jae-Boong Choi
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  viii, 137 p. ; 28 cm
シリーズ名: PVP ; v. 461
所蔵情報: loading…
18.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Poh-Sang Lam ; contributing editors, David P.G. Lidbury ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  xii, 177 p. ; 28 cm
シリーズ名: PVP ; v. 462
所蔵情報: loading…
19.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Poh-Sang Lam ; contributing editors, Claud Faidy ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 193 p. ; 28 cm
シリーズ名: PVP ; vol. 463
所蔵情報: loading…
20.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Frederick W. Brust ; contributing editors, Pingsha Dong ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vii, 239 p. ; 28 cm
シリーズ名: PVP ; v. 464
所蔵情報: loading…
21.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M.J. Pettigrew ; contributing editors, J. Antunes ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vii, 240 p. ; 28 cm
シリーズ名: PVP ; v. 465
所蔵情報: loading…
22.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, J.C. Chen ; contributing editors, S.C. Lu ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  viii, 279 p. ; 28 cm
シリーズ名: PVP ; v. 466
所蔵情報: loading…
23.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, R.S. Hafner ; contributing editors, Raúl B. Rebak ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 129 p. ; 28 cm
シリーズ名: PVP ; v. 467
所蔵情報: loading…
24.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Vikram N. Shah ; contributing editors, Georges Bezdikian ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vii, 255 p. ; 28 cm
シリーズ名: PVP ; v. 468
所蔵情報: loading…
25.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, D.K. Williams ; contributing editors, J.F. McCabe, D. Moinereau
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 183 p. ; 28 cm
シリーズ名: PVP ; vol. 469
所蔵情報: loading…
26.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; organized by Young W. Kwon, Howard H. Chung
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  v, 221 p. ; 28 cm
シリーズ名: PVP ; vol. 470
所蔵情報: loading…
目次情報: 続きを見る
General
IMECE2003-42788 Peculiarities of the Power Hydrocannon Operation / G. A. Atanov ; A. N. Semco ; O. P. Petrenko ; E. S. Geskin ; V. Samardzic ; B. Goldenberg
IMECE2003-43187 A Two-Phase Fluid Model for Simulation of Cavitation Phenomena in Pipe-Line Hydraulic Systems / Claudio Negri
IMECE2003-43875 Dynamic Pipe Stresses During Water Hammer V Applications / Robert A. Leishear ; Jeffrey H. Morehouse
IMECE2003-55003 Transient Waterhammer Force and Pipe Response Using Fluid and Structural Coupling / E. Prado ; F. J. Moody
IMECE2003-55098 CFD Applications for Coal/Air Balancing in Power Plants / Sowjanya Vijiapurapu ; Jie Cui ; Sastry Munukutla
Recent Advances in Mechanics of Solids and Structures
Introduction / Young W. Kwon ; Howard H. Chung
IMECE2003-41211 Studies of Hydrogen Embrittlement Effects on Steel Pipeline Used for Natural Gas Transport / Y. Y. Al-Obaid ; Y. F. Al-Obaid
IMECE2003-41356 Fixtures Design for Controlling Distortion of Pressure Vessel During Fabrication / Hee-Tae Lee ; Sang-Beom Shin ; Sung-Hoon Ko
IMECE2003-41867 An Experimental Method to Measure Q-Parameter for Two Parameter Theory of Ductile Fracture / Dong-Hak Kim ; Jeong-Hyun Lee ; Ki-Ju Kang
IMECE2003-42646 A Proper Groove Design for Distortion Control of the Multi-Pass Weldment at Pressure Vessel / Sung-Yun Kim ; Ha-Geun Kim
IMECE2003-43397 Preliminary Mechanical Characterization of Reinforced Rigid Polyurethane Foams / Nagesh Kasichainula ; Sanjeev K. Khanna
IMECE2003-43476 Buckling of the Composite Cracked Cylindrical Shells Subjected to Axial Load / A. Vaziri ; H. Nayeb-Hashemi ; H. E. Estekanchi
IMECE2003-43477 New Electrical Potential Method for Measuring Crack Growth in Nonconductive Materials / D. Swet
IMECE2003-43478 Effective Stress Intensity Factor in Mode III Crack Growth in Round Shafts
IMECE2003-43489 Preliminary Experiments for Evaluating 3-D Effects on Cracks in Frozen Stress Models / C. W. Smith ; J. D. Hansen ; C. T. Liu
IMECE2003-43543 Development of Machine Tool Structure at the Early Stages of Design Process / Emmanuil Kushnir ; Terrence Sheehan
IMECE2003-43600 Mathematical Expression for the Prediction of Penetration in Butt Joints for Duplex Stainless Steel SAF-2205 / Maria Carolina Payares ; Minerva Dorta Almenara
IMECE2003-43651 Free Flexural (or Bending) Vibrations of Orthotropic Composite Mindlin Plates With a Bonded Non-Central (or Eccentric) Lap Joint / U. Yuceoglu ; O. Guvendik ; V. Ozerciyes
IMECE2003-43661 Free Asymmetric Vibrations of Composite Full Circular Cylindrical Shells With a Bonded Central Lap Joint
IMECE2003-43720 Investigation of Microcrack Growth in [0/90]s Composite Laminates / Melody A. Verges ; Paul J. Schilling ; Paul ; D. Herrington ; Arun K. Tatiparthi
IMECE2003-43850 Fatigue Behavior of VARTM Manufactured Biaxial Braided Composites / Jitendra S. Tate ; Ajit D. Kelkar
IMECE2003-43863 The Mixed Mode Crack Problem in a FGM Layer / X. Long ; F. Delale
IMECE2003-43925 Surface Topology Optimization of Water Tanks Using Genetic Algorithm / Cecil Lawrence ; Wieslaw M. Szydlowski
IMECE2003-55239 Inelastic Behavior of Pipe Subjected to Steady Extension and Cyclic Bending / Yanping Yao ; Ming-Wan Lu ; Xiong Zhang
IMECE2003-55250 Multi-Scale Approach for Nonhomogeneous Microstructural Effects on Damage in Particulate Composites / W. M. Cho ; Y. W. Kwon
IMECE2003-55475 Dynamic Stresses During Structural Impacts
Author Index
General
IMECE2003-42788 Peculiarities of the Power Hydrocannon Operation / G. A. Atanov ; A. N. Semco ; O. P. Petrenko ; E. S. Geskin ; V. Samardzic ; B. Goldenberg
IMECE2003-43187 A Two-Phase Fluid Model for Simulation of Cavitation Phenomena in Pipe-Line Hydraulic Systems / Claudio Negri
27.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Clay D. Rodery, Yoshio Takagi ; contributing editors, Naoki Miura ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c2004  vi, 167 p. ; 28 cm
シリーズ名: PVP ; vol. 471
所蔵情報: loading…
目次情報: 続きを見る
Fitness for Service, Life Extension, Remediation, and Repair: Practical Applications
Introduction / Clay D. Rodery
PVP2004-2233 Investigation of Duplex Stainless Steels for Pipeline Repairs / Dave Fetzner ; Nate Ames ; Greg Ruschau
PVP2004-2234 Design and Remnant Life Analysis of a Carbon Steel Containment Jacket Operating in the Creep Range / David Mair
PVP2004-2235 Emergency Assessment and Repairs of a Process Tower Subjected to Corrosion Under Insulation (CUI) / Ayman M. Cheta
PVP2004-2236 Pressure Equipment Integrity at a Large Chemical Process Facility / George Antaki
PVP2004-2237 Analysis of a Bolted Joint Failure in a Hydraulic Press / Jason Deadman
PVP2004-2238 Evaluation of Multiple Crack Propagation Behavior in a Gas Turbine Blade Under Thermal Fatigue Condition / Akira Morita ; Hiroyuki Kagawa ; Shiro Kubo
PVP2004-2239 Failure Analysis of Weld Repaired Turbine Rotor / Fred V. Ellis ; Blaine W. Roberts
PVP2004-2240 Inferior Material Failures
PVP2004-2241 Assessment of a Damaged Piping System Utilizing Laser Surface Scanning and Finite Element Analysis / Hilliard L. Livingston ; Richard P. Brodzinski
PVP2004-2242 Life Extension of Bolted Flanged Connections From a Design Peculiarity's Point of View / Anatoly I. Efremov
PVP2004-2243 Approach to Establish Flaw Evaluation Method for Class 2 and 3 Light Water Reactor Pipes / Naoki Miura ; Katsumasa Miyazaki ; Masakazu Hisatsune ; Kunio Hasegawa ; Koichi Kashima
Fitness for Service and Life Management of Pressure Vessels and Piping Systems
PVP2004-2244 Fitness for Service Assessments of Bulging and Out-of-Round Structures / Trevor G. Seipp ; Peter Carter ; D. L. Marriott ; M. J. Swindeman
PVP2004-2245 Three-Dimensional Identification of Semi-Elliptical Surface Crack by Means of Direct-Current Electrical Potential Difference Method With Multiple-Probe Sensor / Naoya Tada ; Masayoshi Okada ; Jun Iwamoto
PVP2004-2246 An Estimator for the Influence of Service Temperature on Creep Rupture Life / Marvin J. Cohn
PVP2004-2247 Characteristics of Repair Welds on Aged 2.25CR-1Mo Steel for Creep and Creep-Fatigue Applications / Yoshio Takagi ; Shigeru Otsuki ; Takuya Ito ; Isamu Nonaka
PVP2004-2248 Standardization of Acoustic Emission Testing of Fossil Power Plant Seam-Welded High Energy Piping / John M. Rodgers ; Richard M. Tilley
Erosion/Corrosion of Power Plant and Piping Components
PVP2004-2249 Determination of Corrosion Layers and Protective Coatings on Steels and Alloys Used in Simulated Service Environment of Modern Power Plants / San Iyer ; James F. McCabe ; Hubertus Nickel ; Willem J. Quadakkers ; Lorenz Singheiser
PVP2004-2250 Stress Classification and Assessment of Locally Thinned Class 1 Piping Components
PVP2004-2251 Managing Flow Accelerated Corrosion in Carbon Steel Piping in Nuclear Plants / Z. H. Walker
Author Index
Fitness for Service, Life Extension, Remediation, and Repair: Practical Applications
Introduction / Clay D. Rodery
PVP2004-2233 Investigation of Duplex Stainless Steels for Pipeline Repairs / Dave Fetzner ; Nate Ames ; Greg Ruschau
28.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, M. Hayashi, T. Shimakawa, W.J. Koves ; contributing editors, C. Becht IV ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  viii, 246 p. ; 28 cm
シリーズ名: PVP ; v. 472
所蔵情報: loading…
目次情報: 続きを見る
Design, Analysis and Materials for Elevated Temperatures
Introduction / C. Becht ; A. Ponter ; N. Kasahara ; M. Younan ; S. Asada
PVP2004-2252 Validity of High-Temperature Strength Standards for Heat Resistant Steels / F. Abe ; F. Masuyama ; Y. Sawaragi ; K. Kimura
PVP2004-2253 Extrapolation of Shorter Time Creep Rupture Data Using the Damage Mechanics Approach of Penny / Heloisa C. Furtado ; Iain Le May ; Luiz Henrique de Almeida ; Robert Peace
PVP2004-2254 Estimation of Fracture Mechanics Parameters Under Displacement-Controlled Elastic Plastic Fatigue Conditions / Takumi Tokiyoshi ; Toshihide Igari ; Nobuyuki Takao ; Akihiro Kanaya
PVP2004-2255 Research and Development Issues for Fast Reactor Structural Design Standard (FDS) / Naoto Kasahara ; Masanori Ando ; Masaki Morishita ; Hiroshi Shibamoto ; Yoshihiko Tanaka ; Kazuhiko Inoue
PVP2004-2256 Reference Stress Values for Toroidal Vessels Subjected to Uniform Internal Pressure / Khosrow Zarrabi ; Abheek Basu
PVP2004-2257 Design and Fabrication of Reactor Pressure Vessel for High Temperature Engineering Test Reactor (HTTR) / Yukio Tachibana ; Shigeaki Nakagawa ; Tatsuo Iyoku
PVP2004-2258 Sophisticated Creep-Fatigue Life Estimation Scheme for Pressure Vessel Components Based on Stress Redistribution Locus Concept / Takashi Shimakawa ; Kyotada Nakamura ; Ken-ichi Kobayashi
PVP2004-2259 Development of the Guideline on Inelastic Analysis for Design
PVP2004-2260 Cyclic Analysis for High Temperature Design / Peter Carter ; D. L. Marriott ; M. J. Swindeman
PVP2004-2261 Type IV Creep Damage Analysis for Full Size Component Test on Welded P91 Boiler Hot Reheat Piping / Fumio Takemasa ; Isamu Nonaka ; Takuya Ito ; Kensuke Saitou ; Yoshikazu Miyachi ; Yukio Kagiya
Inelastic and Nonlinear Analysis, Limit Loads
PVP2004-2262 Plastic Analysis of a Reactor Pressure Vessel Support Pad With Different Methods From Appendix F, Faulted Conditions, Comparison of Allowable Loads / Maher Y. A. Younan ; Seiji Asada ; Konrad Schramm
PVP2004-2263 Technical Bases for Alternative Stress Evaluation Criteria in Japan Based on Partial Inelastic Analyses / Asao Okamoto ; Isoharu Nishiguchi ; Mitsuru Aoki ; Yasuhide Asada
PVP2004-2264 Simplified Elasto-Plastic Response Analysis Method of Piping / Akihito Otani ; Izumi Nakamura ; Hajime Takada
Plastic Piping Properties and Analysis
PVP2004-2265 Experimental Investigation Into the Fracture Toughness of Polyethylene Pipe Material / Robert A. Robleto ; Nobuhiro Yoshikawa ; Ihab Mamdouh Graice ; Soheir Ahmed Radwan Naga
PVP2004-2266 Influence of Crack Orientation and Crosshead Speed on the Fracture Toughness of PVC Pipe Materials / T. M. EL-Bagory ; M. S. EL-Fadaly ; M. Y. A. Younan ; L. A. Abdel-Latif
PVP2004-2267 Effect of Mechanical Loading on the Performance of Piezolelectric Transducer for the Health Monitoring of Composite Pressure Vessels / Takayuki Kusaka ; Peter X. Qing ; Fu-Kuo Chang
PVP2004-2268 Influences of Fabrication Defects Upon the Strength and Lives of Filament Wound Composite Cylinders / Tatsumi Takehana ; Takeru Sano ; Masanori Kawahara
PVP2004-2269 Optimum Design of Net Reinforced Composite Pressure Vessel
Fatigue
PVP2004-2985 High-Cycle Fatigue Strength and Residual Stress in Welded Joints of Structural Steels / Masahito Mochizuki ; Masao Toyoda
PVP2004-2986 Frequency Effects on Gigacycle Fatigue Properties of High-Strength Steels / Yoshiyuki Furuya ; Saburo Matsuoka ; Takayuki Abe
PVP2004-2987 Low Cycle Fatigue Analysis of Storage Canisters Due to Expansion of Contents / Harry E. Flanders, Jr.
PVP2004-2988 Improvement of Fatigue Strength by Using Cavitating Jet in Air / Hitoshi Soyama ; Dan Macodiyo
PVP2004-2989 Fretting Fatigue Strength of Nozzle Shaped Structure / Makoto Hayashi ; Takashi Ito
PVP2004-2990 K[subscript 1] Evaluation Method on Crack Growth of Bottom Mounted Instrumentation Penetrations in a Reactor Pressure Vessel / Masayuki Mukai ; Tetsuo Yamashita ; Naoki Chigusa ; Masashi Kameyama
PVP2004-2991 Molecular Dynamics Simulation of the Effect of Large Angle and Small Angle Grain Boundaries on the Near-Threshold Fatigue Crack Growth in Iron / Shiro Kubo ; Masaki Misaki
PVP2004-2992 Threshold Stress for Crack-Healing of Silicon Nitride Ceramics / Koji Takahashi ; Kotoji Ando ; Shoko Yoshida ; Shinji Saito
PVP2004-2993 Fatigue Crack Modeling and Simulation Based on Continuum Damage Mechanics / Masakazu Takagaki ; Toshiya Nakamura
Thermal Fatigue
PVP2004-2994 High Cycle Thermal Fatigue on a Mixing Zone of Auxiliary Cooling System / Said Taheri
PVP2004-2995 Development of a Thermal Fatigue Screening and Evaluation Methodology for Pressurized Water Reactor Plants / J. D. Keller ; A. J. Bilanin ; S. T. Rosinski
PVP2004-2996 Spectra Thermal Fatigue Tests Under Frequency Controlled Fluid Temperature Variation: Development of Test Equipment and Preliminary Tests / Shinichi Hasebe ; Sumio Kobayashi ; Nobuchika Kawasaki ; Hiroshi Morita
PVP2004-2997 Prediction of Fatigue Crack Propagation of Sub-Surface Cracks by "SCAN" / Masaki Shiratori ; Naoki Yoshikawa ; Fuminori Iwamatsu ; Hisao Matsushita ; Shigeo Omata ; Hiroyuki Matsuda ; Toshiro Miyoshi
Author Index
Design, Analysis and Materials for Elevated Temperatures
Introduction / C. Becht ; A. Ponter ; N. Kasahara ; M. Younan ; S. Asada
PVP2004-2252 Validity of High-Temperature Strength Standards for Heat Resistant Steels / F. Abe ; F. Masuyama ; Y. Sawaragi ; K. Kimura
29.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Jeff Pfeifer ; contributing editors, Jan Keltjens ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 181 p. ; 28 cm
シリーズ名: PVP ; v. 473
所蔵情報: loading…
目次情報: 続きを見る
Fatigue in High Pressure Vessels
PVP2004-2270 High Pressure Fatigue Testing of 160 ksi Yield Strength Stainless Steel Tubing / Peter Koerner ; Waldemar Hiller ; Rolf Wink ; Henrich Strackerjahn ; Matthias Goeken
PVP2004-2271 Proposal for the Implementation of Elevated Temperature Design Fatigue Curve for 2-1/4CR-1Mo-V and 3CR-1Mo-V Steels / Tatsumi Takehana ; Takeru Sano ; Susumu Terada ; Hideo Kobayashi
PVP2004-2272 Failure of a Second Stage Valve Head on a LDPE Hyper Compressor / Jan Keltjens ; Marcel Hendrikx
PVP2004-2273 Analysis of Proportional and Nonproportional Loading for Low Cycle Fatigue Design / Takamoto Itoh ; Masao Sakane
Fatigue and High Pressure Applications
PVP2004-2274 Recent Trends of HIP Equipment Technology in Japan / Takao Fujikawa ; Yasuo Manabe ; Makoto Yoneda ; Shigeo Kofune ; Tomomitsu Nakai
PVP2004-2275 Mean Stress Correction Procedure in Fatigue Evaluation for High Pressure Vessels / Kenji Yamamoto
PVP2004-2276 Fatigue Crack Growth in Thick-Walled Cylinders With Straight-Fronted Cracks / David P. Kendall
PVP2004-2277 Stresses Within Compound Tubes Comprising a Steel Liner and an External Carbon-Fiber Wrapped Laminate / Anthony P. Parker ; Edward Troiano ; John H. Underwood
Code Applications and Design
PVP2004-2278 Stress and Fracture Analysis of Ceramic Lined, Composite or Steel Jacketed Pressure Vessels
PVP2004-2279 Comparison of Different Codes and Standards Applicable for Design and Calculation of High Pressure Equipment / Johannes Schedelmaier ; Manfred Polzl
PVP2004-2280 Safety Aspects of Design of Cylinders and Hyper-Compressors for LDPE / Enzo Giacomelli ; Paolo Battagli ; Fabrizio Lumachi ; Luciano Gimignani
PVP2004-2281 Control of Pulsations and Vibrations in Hypercompressors for LDPE Plants / Marco Passeri ; Fabrizio Zagli ; Stefano Generosi
12th Annual Student Paper Competition
Introduction / Joseph Sinnappan
PVP2004-2282 Fitness-for-Service Methodology Based on Variational Principles in Plasticity / H. Indermohan ; R. Seshadri
PVP2004-2283 FE Predictions of Temperature Distributions in a Multipass Welded Piping Branch Junction / Wei Jiang ; Kadda Yahiaoui ; Chang J. Wang ; Frank R. Hall ; Tahar Laoui
PVP2004-2284 Stress/Fluid Pressure Waves in Radially Expanded Solid Tube / A. Karrech ; A. C. Seibi ; T. Pervez ; S. Al-Hiddabi
PVP2004-2285 Stress Analysis and Sealing Performance Evaluation in Non-Circular Flange Connections With Gaskets Subjected to Internal Pressure / Wataru Maezaki ; Toshiyuki Sawa
PVP2004-2286 A Fuzzy Approach for Determining a Feasible Point in a Constrained Problem / R. Timothy Marler ; Jingzhou Yang ; S. S. Rao
PVP2004-2287 Study on Estimation Method for Seismic Safety Margin of 3D Piping System With Degradation: Establishing Elasto-Plastic Analysis Model / Akira Mikami ; Makoto Udagawa ; Hajime Takada
PVP2004-2288 Fundamental Study on the Super-Long-Period Active Isolation System / Keisuke Minagawa ; Satoshi Fujita
PVP2004-2289 Application of a Knowledge-Based Information System for Life Extension of Steel Making Plant / Y. J. Park ; J. B. Choi ; Y. J. Kim
PVP2004-2290 Analytical Study of Flow Regimes for Direct Contact Condensation Based on Parametrical Investigation / Anka Petrovic
PVP2004-2291 Development of a Web-Based Interface for the Automatic Finite Element Analysis of Pressure Vessels / Colin Russell ; David H. Nash
PVP2004-2292 Dynamic Analyses of a Metallic Sample in Sonic Infrared NDE Technique: Experimental and Computational Approach / Chinmoy P. Saha
PVP2004-2293 Nonlinear Finite Element Analysis of a Threaded Pipe Connection / Farzad Tasbihgoo ; John P. Caffrey ; Sami F. Masri
Author Index
Fatigue in High Pressure Vessels
PVP2004-2270 High Pressure Fatigue Testing of 160 ksi Yield Strength Stainless Steel Tubing / Peter Koerner ; Waldemar Hiller ; Rolf Wink ; Henrich Strackerjahn ; Matthias Goeken
PVP2004-2271 Proposal for the Implementation of Elevated Temperature Design Fatigue Curve for 2-1/4CR-1Mo-V and 3CR-1Mo-V Steels / Tatsumi Takehana ; Takeru Sano ; Susumu Terada ; Hideo Kobayashi
30.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Poh-Sang Lam ; contributing editors, Douglas A. Scarth ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 173 p. ; 28 cm
シリーズ名: PVP ; v. 474
所蔵情報: loading…
目次情報: 続きを見る
Application of Fracture Mechanics in Failure Assessment
Introduction / Poh-Sang Lam ; Douglas Scarth ; David Lidbury ; Koichi Kashima
PVP2004-2294 Three-Dimensional Analysis of Crack in Centrally Perforated Photoelastic Cylinders Under Internal Pressure / C. T. Liu ; C. W. Smith
PVP2004-2295 Fracture Toughness and Crack Path Deviations in Laser Welded Joints / Bostjan Bezensek ; John W. Hancock
PVP2004-2296 Mechanical Properties and Fracture Toughness of Aluminum Vessels by Friction Stir Welding / Masahito Mochizuki ; Masao Toyoda ; Masayuki Inuzuka ; Hidehito Nishida
PVP2004-2297 A New Approach to Predicting Fatigue Crack Propagation / Yanyao Jiang ; Miaolin Feng
PVP2004-2298 Crack Opening Area for an Isolated Crack Subjected to a Symmetric Model I Stress Distribution / E. Smith
PVP2004-2299 Stress Analysis of an Elastic Cracked Layer Bonded to a Viscoelastic Substrate / C. K. Chao ; C. C. Hsiao
PVP2004-2300 Mechanisms and Modeling Comparing HB7 and A723 High Strength Pressure Vessel Steels / E. Troiano ; A. P. Parker ; J. H. Underwood ; C. Mossey ; G. N. Vigilante
PVP2004-2301 Delayed Hydride Cracking Initiation at Simulated Secondary Flaws in Zr-2.5 Nb Pressure Tube Material / Jun Cui ; Gordon K. Shek ; Douglas A. Scarth ; William K. Lee
PVP2004-2302 Development of Weight Functions for Modelling Delayed Hydride Cracking Initiation at a Blunt Flaw / Joanna Wu ; Ted Smith ; Dennis M. Kawa
PVP2004-2303 Development of Analytical Evaluation Procedures and Acceptance Criteria for Pipe Wall Thinning in ASME Code Section XI / Kunio Hasegawa ; Gery M. Wilkowski ; Lee F. Goyette
PVP2004-2304 Comparison of Fracture Methodologies for Flaw Stability Analysis of Storage Tanks / P.-S. Lam ; R. L. Sindelar
PVP2004-2305 A New Approach for Evaluating Radiation Embrittlement of Reactor Pressure Vessel Steels / J. A. Wang ; N. S. V. Rao
PVP2004-2306 On Bias in TO Values Derived With Compact and PCVN Specimens / Mikhail A. Sokolov ; Randy K. Nanstad
PVP2004-2307 Comparison of Master Curve and Statistical Model Approach for Prediction of Fracture Toughness of ASTM A285 Steel / Karthik Subramanian ; Andrew J. Duncan
Optimized Manufacturing Techniques for Enhanced Performance
PVP2004-2308 Benchmark of Plate Forming and Weld Distortion Process / Andrew Duncan ; James M. Gombas
PVP2004-2309 Computational and Experimental Simulation of Synchronous Generator Ventilation / Radek Vlach ; Robert Grepl ; Cestmir Ondrusek
PVP2004-2310 Complex Dynamic Modelling of Mobile Robot
PVP2004-2311 Hot Isostatic Pressing of Austenitic Stainless Steel Powders for Pressure Retaining Applications / W. Barry Burdett ; Paul Hurrell ; Alan Gilleland
PVP2004-2312 Influence of the Cutting Variables on the Surface Roughness of Alloy Steels Machined With Cylindrical Grinding / Zulay Cassier ; Patricia Munoz-Escalona ; Carlos Tepedino
PVP2004-2313 Design Optimization of Magnetic Coupling Using Genetic Algorithm and 2D FEM Model / Petr Krejci
Author Index
Application of Fracture Mechanics in Failure Assessment
Introduction / Poh-Sang Lam ; Douglas Scarth ; David Lidbury ; Koichi Kashima
PVP2004-2294 Three-Dimensional Analysis of Crack in Centrally Perforated Photoelastic Cylinders Under Internal Pressure / C. T. Liu ; C. W. Smith
31.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Yong-Yi Wang ; contributing editors, David P.G. Lidbury ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  ix, 253 p. ; 28 cm
シリーズ名: PVP ; vol. 475
所蔵情報: loading…
目次情報: 続きを見る
European R&D Projects
Introduction / David Lidbury ; Elisabeth Keim ; Dominique Moinereau
PVP2004-2540 Structural Integrity of Dissimilar Welds: ADIMEW Project Overview / Claude Faidy
PVP2004-2541 Experimental Four Points Bending Test on a Real Size Bimetallic Welded Pipe: European Project ADEMEW / Gregoire Martin ; Antoine Menard
PVP2004-2542 ADIMEW Test: Assessment of a Cracked Dissimilar Metal Weld Assembly / John B. Wintle ; Bridget Hayes ; Martin R. Goldthorpe
PVP2004-2543 ADIMEW Project: Ductile Tearing Prediction of a Cracked 16" Dissimilar Metal Weld Junction / Philippe Gilles ; Josette Devaux ; Marie-France Cipiere
PVP2004-2544 Validation of Constraint Based Methodology in Structural Integrity: Project Overview and Update
PVP2004-2545 Fracture Analysis of Surface-Breaking Shallow Flaw Behaviour in the NESC-IV Bend Beam Tests / N. Taylor ; I. Sattari-Far ; D. Siegele ; I. Varfolomeyev ; L. Stumpfrock
PVP2004-2546 Application of a Weibull Stress Model to Predict the Failure of Surface and Embedded Cracks in Large Scale Beams Made of Clad and Unclad RPV Steel / Shengjun Yin ; Richard Bass ; Paul Williams ; Michael Ludwig
PVP2004-2547 Effect of Shallow Flaws and Biaxial Loading on Transition Temperatures Using a Weibull Stress Model
PVP2004-2548 Investigation of Constraint Effects on Fracture Toughness for CC(T) Specimens / Dieter Siegele ; Igor Varfolomeyev ; Kim Wallin ; Gerhard Nagel
PVP2004-2549 Engineering Assessment of Constraint Effects on Cleavage Fracture / Andrew Sherry ; Dennis Hooton
PVP2004-2550 Effect of In-Plane Constraint and Type of Loading on Fracture Toughness of Two RPV Steels of PWRs / D. Lauerova ; M. Brumovsky
PVP2004-2551 Project NURBIM (Nuclear RI-ISI Methodology for Passive Components), Benchmarking of Structural Reliability Models and Associated Software / B. Brickstad ; T. Schimpfke ; O. J. V. Chapman ; P. Dillstrom ; C. Cueto-Felgueroso ; C. D. Bell
PVP2004-2552 Crack Initiation and Arrest of Irradiated RPV-Steels: A National Project on German RPV Weld and Base Materials / Reinhard Langer ; Hilmar Schnabel ; Hieronymus Hein
PVP2004-2553 A Global Limit Load Solution for Plates With Semi-Elliptical Surface Cracks Under Combined Tension and Bending / Yuebao Lei
Control Rod Drive Mechanism: Material Issues
PVP2004-2554 The Impact of a Reactor Vessel Upper Head Temperature Reduction Program on Cracking Potential and Inspection of Alloy 600 Closure Head Penetrations / David L. Rudland ; Sharif Rahman ; David R. Forsyth ; Pat L. Strauch ; Paul J. Kreitman
PVP2004-2555 Advanced Nondestructive Examination Technologies for Alloy 600 Components / Donald C. Adamonis ; Robert P. Vestovich ; Fred G. Whytsell ; Filippo D'Annucci ; Eric Loehlein ; Les Spain ; Russel S. Devlin ; Mark W. Kirby ; John P. Lareau ; Per Sjoberg
PVP2004-2556 Impact of Welding Sequence on the CRDM Nozzle-to-Vessel Weld Stress Analysis / Yaoshan Chen ; David Rudland ; Gery Wilkowski
PVP2004-2557 FEA Welding Residual Stress and Fracture Mechanics Model for Nozzles With J-Groove Attachment Welds: Methodology and Application / John E. Broussard III ; E. Stephen Hunt ; Glenn A. White
PVP2004-2558 Unified Interpretation of Crack Growth Rates of NI-Base Alloys in LWR Environments / Zhanpeng Lu ; Tetsuo Shoji
Service Experience in Operating Nuclear Plants
PVP2004-2559 A Fracture Mechanics Evaluation of an Indication in an RPV Vertical Shell Weld Produced by the Upjohn Welding Technique / Douglas K. Rodgers ; H. S. Mehta ; Hardayal S. Mehta ; Wade F. Miller ; M. A. Brooks
PVP2004-2560 Thermal-Hydraulic and LBB Evaluations to Justify Short-Term Plant Operation With a CRD Return Line Susceptible to Potential Thermal Stratification / Anjna R. Mehta ; Hwang Choe ; George B. Inch ; Roy Corieri
PVP2004-2561 Post-Irradiation Ductility Demonstration Tests of Weapons-Derived MOX Fuel Cladding / W. J. McAfee ; W. R. Hendrich ; T. E. McGreevy ; C. A. Baldwin ; N. H. Packan
Materials for Hydrogen Service
PVP2004-2562 Materials in Support of a Newly Emerging Hydrogen Infrastructure / Michiel Brongers ; Karthik Subramanian ; Shunichi Suzuki ; Louis E. Hayden ; John C. Tverberg
PVP2004-2563 Review of Test Methods for Evaluating Hydrogen Embrittlement Susceptibility of Materials / Deanna J. Burwell ; Michiel P. H. Brongers ; John A. Beavers
PVP2004-2564 Materials Selection and Performance Criteria for Hydrogen Pipeline Transmission / Mo Mohitpour ; Hemant Solanky ; Gopala K. Vinjamuri
Author Index
European R&D Projects
Introduction / David Lidbury ; Elisabeth Keim ; Dominique Moinereau
PVP2004-2540 Structural Integrity of Dissimilar Welds: ADIMEW Project Overview / Claude Faidy
32.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Yong-Yi Wang ; contributing editors, Michael Gold ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 269 p. ; 28 cm
シリーズ名: PVP ; v. 476
所蔵情報: loading…
目次情報: 続きを見る
Experience with Creep-Strength Enhanced Ferritic Steels
Introduction / Michael Gold ; Fujimitsu Masuyama
PVP2004-2565 Properties and Workability of New Creep Strength Enhanced Steels as Known Grades 23, 24, 911 and 92 / Walter Bendick ; Jean Gabrel ; Jean-Claude Vaillant ; Bruno Vandenberghe
PVP2004-2566 Influence of Stress on Degradation and Life Prediction of High Strength Ferritic Steels / Kazuhiro Kimura ; Kota Sawada ; Kiyoshi Kubo ; Hideaki Kushima
PVP2004-2567 Creep Properties of GR.91 Castings and Forgings With High Residual Elements / F. Masuyama ; N. Nishimura ; M. Ozaki
PVP2004-2568 Fabrication, Construction, and Operation Problems for Grade 91 Fossil Power Components / Marvin J. Cohn ; Jeffrey F. Henry ; Dan Nass
PVP2004-2569 Creep Stability of High Strength 9% Cr-W Ferritic Heat Resistant Tube GR.92 After 15 Years in Service / Taro Muraki ; Masahiro Oghami ; Nobuyoshi Komai ; Kosei Matsufuji ; Masaaki Katata ; Hisashi Naoi ; Toshio Fujita
PVP2004-2570 Metallurgical Investigation of a Type IV Damage at the Heat Affected Zone of Weld for Tungsten Containing Martensitic Heat Resistant Steels / Yasushi Hasegawa ; Masahiro Ohgami
PVP2004-2571 10-Year Experience With T23(2.25Cr-1.6W) and T122(12Cr-0.4Mo-2W) in a Power Boiler / N. Komai ; S. Yamamoto ; M. Igarashi
PVP2004-2572 Full Size Internal Pressure Creep Test for Welded P91 Hot Reheat Piping / Isamu Nonaka ; Takuya Ito ; Fumio Takemasa ; Kensuke Saito ; Yoshikazu Miyachi ; Akigo Fujita
PVP2004-2573 Full Size Internal Pressure Creep Test for Welded P91 Hot Reheat Elbow
PVP2004-2574 Phase Transformation and Properties of GR.91 at Around Critical Temperature
PVP2004-2575 Steam Oxidation of Creep-Strength Enhanced 9Cr Ferritic Steel: Void Formation in Oxide Scale and Its Relation to Scale Exfoliation / Yutaka Watanabe ; Hiroaki Kikkawa
PVP2004-2576 Mechanical Properties of New Grades of FE-3Cr-W Alloys / Vinod K. Sikka ; Ronald L. Klueh ; Philip J. Maziasz ; Suresh Babu ; Michael L. Santella ; Maan H. Jawad ; John R. Paules ; Kenneth E. Orie
PVP2004-2577 Creep Failure Behavior of Creep-Strength Enhanced Ferritic Steels
New and Emerging Computational Methods
PVP2004-2578 Application of a Shooting Method for Regenerative Chatter During Turning / B. N. Rao ; S. Rahman ; J. Tang ; Y. H. Park ; N. K. Chandiramani ; T. Pothala
PVP2004-2579 A Continuum Shape Sensitivity Method for Fracture Analysis of Isotropic Functionally Graded Materials
PVP2004-2580 Computational Models on Graphs for the Nonlinear Hyperbolic System of Equations / Alexander S. Kholodov ; Yaroslav A. Kholodov
PVP2004-2581 Numerical Simulation of Load Deformation Behaviour of Cracked Piping Components Considering Crack Growth / T. V. Pavankumar ; J. Chattopadhyay ; B. K. Dutta ; H. S. Kushwaha
PVP2004-2582 Application of an Implicit Redundant Genetic Algorithm for Structural Damage Identification of Flexible Structures / T. R. Liszkai
PVP2004-2583 Continuum Shape Sensitivity Analysis of Cracks in Functionally Graded Materials
PVP2004-2584 Buckling of Composite Laminates Using Higher Order Deformation Theory / N. G. R. Iyengar ; Arindam Chakraborty
PVP2004-2585 Development of an Integrity Evaluation System on the Basis of Cooperative Virtual Reality Environment for Nuclear Power Plant / J. C. Kim ; J. B. Choi ; Y. H. Choi
PVP2004-2586 Load Bearing Capacity of Through Wall Cracked Elbows: Comparison of Test Results With Calculation
PVP2004-2587 A Numerical Model of Solidification of a Massive Casting From Malleable Cast-Iron / Frantisek Kavicka ; Josef Stetina ; Karel Stransky ; Jana Dobrovska ; Bohumil Sekanina ; Jaromir Heger
PVP2004-2588 Analytical Determination of Material JR and Fracture Toughness Transition Curves Using Micro-Mechanical Modelling / M. K. Samal ; M. K. Sahu
Author Index
Experience with Creep-Strength Enhanced Ferritic Steels
Introduction / Michael Gold ; Fujimitsu Masuyama
PVP2004-2565 Properties and Workability of New Creep Strength Enhanced Steels as Known Grades 23, 24, 911 and 92 / Walter Bendick ; Jean Gabrel ; Jean-Claude Vaillant ; Bruno Vandenberghe
33.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, M.A. Porter, T. Sato ; contributing editors, D. Martens ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 213 p. ; 28 cm
シリーズ名: PVP ; v. 477
所蔵情報: loading…
目次情報: 続きを見る
Design and Analysis of Vessels and Components
Introduction / Chakrapani Basavaraju ; Don Florizone ; Akihito Otani ; James F. McCabe ; Trevor Seipp
PVP2004-2589 The Effect of Reduced Design Margin on the Fire Survivability of ASME Code Propane Tanks / A. M. Birk
PVP2004-2590 Using Finite Element Analysis Combined With Strain Gage Testing to Do Proof Test to Establish MAWP / Donald J. Florizone
PVP2004-2591 A Method for Applying Automatic Temperature Control to the Transient Finite Element Analysis of a Pressure Vessel Undergoing Postweld Heat Treatment / Michael Sciascia
PVP2004-2592 Clarifying the Gray Area Between FEA, Code and Experience Based Design / David Mair
PVP2004-2593 On the Performance of a Commercial Finite Element Code in Multi-Pass Welding Simulation / Dimitrios Elias Katsareas ; Carsten Ohms ; Anastasius George Youtsos
PVP2004-2594 Transient Thermal Finite Element Analysis Based on Field Measured Data and the Impact on Fatigue / Kenneth D. Kirkpatrick ; George A. Miller III ; Barry J. Millet ; David W. Malek ; Leslie P. Antalffy
PVP2004-2595 Guidelines for FEA Modeling of Cylinder-to-Cylinder Intersection / Liping Xue ; G. E. O. Widera
PVP2004-2596 Reduction in Stresses Shown in Piping Programs in Large Diameter Pipe Branch Connections by Applying Flexibilities Computed by Shell Finite Element Analysis / Robert A. Robleto
PVP2004-2597 A Thin Shell Theoretical Solution for Two Intersecting Cylindrical Shells Due to External Branch Pipe Moments / M. D. Xue ; D. F. Li ; K. C. Hwang
PVP2004-2598 Comparison of Limit Load, Linear and Nonlinear FE Analyses of Stresses in a Large Nozzle-to-Shell Diameter Ratio Application / Michael A. Porter ; Steven R. Massey ; Dennis H. Martens
PVP2004-2599 An Investigation of a Heat Exchanger Tubesheet Crack Caused by a Process Upset / Trevor G. Seipp ; Shiju V. P. George
PVP2004-2600 Effect of the Geometry of Groove on Connection Strength of the Hydraulically Expanded Tube-to-Tubesheet Joints of Heat Exchangers / H. F. Wang ; Z. F. Sang
PVP2004-2601 Slip Blinds at Higher Pressures / Jaan Taagepera ; Don La Bounty
PVP2004-2602 Design and Analysis of Open Rack LNG Vaporizer / Norihiro Hisada ; Masaru Sekiguchi
PVP2004-2603 Buckling Considerations and the Use of Code Case 2286-1 for Analyzing a Flue Gas Desulphurization Vessel / Dennis K. Williams
PVP2004-2604 Analysis of Shells of Noncircular Cross Section / Jack E. Helms ; Michael W. Guillot
PVP2004-2605 Effect of Length on Stress Concentration for Short Cylindrical Members With Holes / Nando Troyani ; Gaetano Sterlacci ; Nelson Jaimes ; Carlos J. Gomes
PVP2004-2606 Nonlinear Analysis of Flexibility and Local Stress Distribution at Nozzle-Shell Intersection Considering Refractory Lining Rigidity / Takuya Sato ; Shingo Nomura
Design and Analysis of Piping Components
PVP2004-2607 Assessment of Local Decreases in Wall Thickness at the Connection Straight-Pipe to 0[degree]-90[degree]-Bends / Robert Kauer ; Wieland Holzer
PVP2004-2608 Ultimate Capacity of Pressurized 90 deg. Elbows Under Bending / S. A. Karamanos ; D. Tsouvalas ; A. M. Gresnigt
PVP2004-2609 Recent Design Approaches of Large Bore Piping Exeeding 100 of Ratio D/T / Toshio Mabuchi ; Masataka Shinohara
PVP2004-2610 Reliability Testing of Pressure Relief Valves / Robert E. Gross
PVP2004-2611 Thermal Stresses at Dissimilar Pipe-Stanchion Interfaces
PVP2004-2612 An Iterative Approach for the Treatment of Nonlinear Supports in the Dynamic Analysis of Piping Systems / Ahmed H. Dweib
PVP2004-2613 Classification of Thermal Piping Loads Using Limit Load Analysis / Shawn W. Morrison
PVP2004-2614 ASME Section III Design-by-Analysis Criteria Concepts and Stress Limits / Gerry C. Slagis
PVP2004-2615 Expander Inlet Piping Design / P. T. Klumpp
Author Index
Design and Analysis of Vessels and Components
Introduction / Chakrapani Basavaraju ; Don Florizone ; Akihito Otani ; James F. McCabe ; Trevor Seipp
PVP2004-2589 The Effect of Reduced Design Margin on the Fire Survivability of ASME Code Propane Tanks / A. M. Birk
34.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Abdel-Hakim Bouzid ; contributing editors, Toshiyuki Sawa, Hans Kockelmann
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 215 p. ; 28 cm
シリーズ名: PVP ; v. 478
所蔵情報: loading…
35.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Dominique Moinereau ; contributing editors, Kenneth K. Yoon, Frank Otremba
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  viii, 144 p. ; 28 cm
シリーズ名: PVP ; v. 481
所蔵情報: loading…
目次情報: 続きを見る
RPV Integrity
PVP2004-2719 Assessment of the Reactor Pressure Vessel Integrity in PTS Conditions: ThermalHydraulic and ThermoMechanical Studies of a Safety Injection in a Four Loop PWR Plant / A. Martin ; S. Bugat ; A. Dahl ; F. Lestang ; F. Beaud
PVP2004-2720 Embedded Crack Treatments and Fracture Toughness Evaluation Methods in Probabilistic Fracture Mechanics Analysis Code for PTS Analysis of RPV / Kunio Onizawa ; Katsuyuki Shibata ; Masahide Suzuki ; Daisuke Kato ; Yinsheng Li
PVP2004-2721 RPV Integrity Assessment: Comparion Between 3 Loops and 4 Loop Studies / Georges Bezdikian ; Dominique Moinereau ; Claude Faidy
PVP2004-2722 Assessment of Large-Scale Pressurized Thermal Shock Experiments Using the FAVOR Fracture Mechanics Computer Code / T. L. Dickson ; M. T. Kirk
PVP2004-2723 Comparison of Predicted Transition Temperature Shifts Between Static Fracture Toughness and Charpy-V Impact Properties Due to Irradiation for an A508 Pressure Vessel Steel / B. Tanguy ; J. Besson ; C. Bouchet
PVP2004-2724 Probabilistic Assessment of Margins in Appendix G Methodology / K. K. Yoon ; H. P. Gunawardane ; S. Rosinski
PVP2004-2725 KIA Crack Arrest Toughness Assessment Using Thermal Shock on Notched Disks / Mejido Hajjaj ; Stephane Bugat ; Clotilde Berdin ; Philippe Bompard
Fracture Mechanics
PVP2004-2726 Influence of Constraint on JR Curves and on Maximum Load of Circumferentially Surface-Cracked Pipes / Jiri Novak
PVP2004-2727 Comparison of J-Integral Values and J-R Curves Between Carbon Steel Compact Tension Specimen and Pipe Specimen / Masahiro Takanashi ; Satoshi Izumi ; Shinsuke Sakai ; Naoki Miura
PVP2004-2728 Overview of Flaw Assessment Methods in the RSE-M Code / Patrick Le Delliou ; Jean-Philippe Sermage ; Bruno Barthelet
PVP2004-2730 Fracture Toughness of Ductile Cast Iron and Applicability of Fracture Mechanics to DCI Casks / Taku Arai ; Toshiari Saegusa ; Namio Urabe ; Hiroshi Takaku
PVP2004-2731 A Limit Pressure Criterion for Cracked Cylinders and Piping Branch Junctions / K. S. Lee ; D. N. Moreton ; D. G. Moffat
PVP2004-2732 Shear-Dominated Fracture of Ductile Metal Under Mixed Loading and Preliminary Assessment / Xiaochun Wang
PVP2004-2733 Temperature-Dependent Micro-Crack Propagation / Kazuhiro Kitamura ; I. L. Maksimov
PVP2004-2734 Evaluation of Stress Intensity Factors by Finite Element Alternating Method / Masayuki Kamaya ; Toshihisa Nishioka
PVP2004-2735 Mechanical Behavior of a Metallic Bellows Under Impact Loading / Junshan Lin ; Toshio Hattori ; Masato Kobayashi ; Kenji Tsuchiya
PVP2004-2736 A Two-Parameter Description of the Behaviour of a Process Zone at a Crack Tip: Part I--General Theory / E. Smith
PVP2004-2737 A Two-Parameter Description of the Behaviour of a Process Zone at a Crack Tip: Part II--Determination of the Parameters
PVP2004-2738 Mechanical and Hydraulic Loads on the Supports of the Rotary Machine Due to Shaft Seizure in a Nuclear Power Plant / S. K. Gupta ; B. Chatterjee ; Rajesh Kumar
Author Index
RPV Integrity
PVP2004-2719 Assessment of the Reactor Pressure Vessel Integrity in PTS Conditions: ThermalHydraulic and ThermoMechanical Studies of a Safety Injection in a Four Loop PWR Plant / A. Martin ; S. Bugat ; A. Dahl ; F. Lestang ; F. Beaud
PVP2004-2720 Embedded Crack Treatments and Fracture Toughness Evaluation Methods in Probabilistic Fracture Mechanics Analysis Code for PTS Analysis of RPV / Kunio Onizawa ; Katsuyuki Shibata ; Masahide Suzuki ; Daisuke Kato ; Yinsheng Li
36.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by, Young Ho Park, John Martin, Isoharu Nishiguchi
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  viii, 285 p. ; 29 cm
シリーズ名: PVP ; vol. 482
所蔵情報: loading…
目次情報: 続きを見る
Issues Related to Nonlinear Finite Element Analysis
PVP2004-2739 Choice of Objective Rate for Non-Proportional Loading Applications / R. G. Sauve
PVP2004-2740 Meshless Dynamic Relaxation Technique for Simulating Atomistic Models Subjected to External Forces Under the Periodic Symmetry / Li Pan ; Don Metzger ; Marek Niewczas
PVP2004-2741 Multiple Void Growth Simulations in the Hyper-Elastic Materials / Tomoaki Tsuji
PVP2004-2742 On the Implementation of Novel Generalised Nonlinear Constraints in Explicit Finite Element Formulations / R. J. Ho ; S. A. Meguid
PVP2004-2743 Simulation of Buckling Instability of a Large Deformation Twisting Operation / D. R. Metzger ; Y. S. Kim ; S. Han
PVP2004-2744 Nonlinear Dynamic Explicit Simulation of a Blast Load on a Building / Siavash Khajehpour ; Greg D. Morandin ; Richard G. Sauve
PVP2004-2745 Prediction of Trimming Process Parameters in Aluminum Sheet Materials Using FE Method / Quan Situ ; Mukesh K. Jain ; Don R. Metzger
PVP2004-2746 Deformation Behaviour of a Transversely Loaded Garter Spring / Brian W. Leitch
PVP2004-2747 Influence of Yield Criteria on the Prediction of Shear Localization Considering the Inhomogeneous Distribution of Microstructure / Xinjian Duan ; Mukesh Jian
Efficient Computational Models for Elastic-Plastic and Limit Load Analysis of Pressure Vessel Components
PVP2004-2748 Analysis of a Thermal Fatigue Test of a Stepped Pipe / D. P. Jones ; J. E. Holliday ; T. R. Leax ; J. L. Gordon
PVP2004-2749 Elastic-Plastic Finite Element Analysis of Double-Edge Notched Fatigue Tests / S. A. Adams
PVP2004-2750 Advanced General-Purpose Finite Element Solid Analysis System Adventure-Solid on the Earth Simulator: Its Application to Full-Scale Analysis of Nuclear Pressure Vessel / Ryuji Shioya ; Masao Ogino ; Hiroshi Kawai ; Shinobu Yoshimura
PVP2004-2751 Weight Functions for T-Stress for Edge Cracks in Thick-Walled Cylinders / J. Li ; C. L. Tan ; X. Wang
PVP2004-2752 A Two-Stage Crack Growth Model Incorporating Environmental Effects / P. Dong ; J. K. Hong
PVP2004-2753 Analytical Limit Loads for Tube Sections With Circumferential Degradation / W. Reinhardt
PVP2004-2754 Study on Strain Concentration for Cylindrical Tubes Under Axial Compressive Loading / Kuniharu Ushijima ; Shigeyuki Haruyama ; Hiroki Hanawa ; Dai-Heng Chen
PVP2004-2755 Plastic and Creep Analyses of the Superheater Header Tubeplate Using Linear Matching Method / Haofeng Chen ; Alan R. S. Ponter
PVP2004-2756 Limit Load of Anisotropic Components Using the M-Beta Multiplier Method / H. Indermohan ; W. D. Reinhardt ; R. Seshadri
PVP2004-2757 A Study on the Elastic Compensation Method for Design by Analysis Codes / Isoharu Nishiguchi ; Masataka Sasaki
PVP2004-2758 Ultrasonic Study on Crystal Orientation Effects Upon Point Defect Growth Caused by Cross Slip Under Plastic Deformation / Michiaki Kobayashi
Finite Element Analysis in Field Applications and Testing
PVP2004-2759 Determination of the Three-Parameter Weibull Distribution and Confidence Bands From Experimental Fatigue Strength Data / Enayat Mahajerin ; Gary Burgess
PVP2004-2760 Practical Criterion for Estimation of Notch Fatigue Strength / Hiroshi Matsuno ; Yoshihiko Mukai
PVP2004-2761 Non-Linear Finite Element Analysis of a Pipe Denting Problem During a Pipe Transfer Operation / Hazel M. Pierson ; Daniel H. Suchora ; Anthony V. Viviano
Recent Developments in Computational Methods
PVP2004-2762 Fatigue Reliability Based Optimal Replacement Decision of Mechanical Components / Jun Tang ; Young Ho Park
PVP2004-2763 Force Identification Using Neural Network / Wakae Kozukue ; Hideyuki Miyaji
PVP2004-2764 The Elucidation of Mechanism of Local Sound Pressure Increase Phenomenon / Reiko Koganei ; Shigemasa Ando ; Qinzhong Shi ; Ichiro Hagiwara
PVP2004-2765 Effective Elastic Moduli of Cracked Solid and Application to Functionally Graded Material / Young H. Park ; Wesley Morgan
PVP2004-2766 Wavelet Domain Solution of CSRBF SLAE for Image Interpolation Using Iterative Methods / Luis A. Diago ; Masaki Kitago
PVP2004-2767 Function Representation of an Image by Means of CSRBF: An Application for Resolution Conversion / M. Kitago ; Y. Taniguchi ; I. Hagiwara
PVP2004-2768 MOAA and Topology Judgment for Mesh Construction / Wen-Jie Cheng ; Arzu Gonenc Sorguc ; Junichi Shinoda
PVP2004-2769 FEM Analysis of Magnetic Field Induced by Martensitic Phase Transformation Around Fatigue Cracks in SUS 304 Stainless Steel / Yuji Nakasone ; Yoshifumi Iwasaki
Numerical Algorithm
PVP2004-2770 Dynamic Responses of Frame Structures Solved Using DQEM and EDQ Based Time Integration Method / Chang-New Chen
PVP2004-2771 Out-of-Plane Deflection of Nonprismatic Curved Beam Structures Considering the Effect of Shear Deformation Solved by DQEM
PVP2004-2772 An Efficient Algorithm for Damage-Coupled Visco-Plastic Fatigue Model / A. H. Zhao ; C. L. Chow
PVP2004-2773 An Application of Modified Predictor-Corrector Method / Mladen Mestrovic
Author Index
Issues Related to Nonlinear Finite Element Analysis
PVP2004-2739 Choice of Objective Rate for Non-Proportional Loading Applications / R. G. Sauve
PVP2004-2740 Meshless Dynamic Relaxation Technique for Simulating Atomistic Models Subjected to External Forces Under the Periodic Symmetry / Li Pan ; Don Metzger ; Marek Niewczas
37.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, A. C. Smith, R.S. Hafner ; contributing editors, N. K. Gupta, S. J. Hensel, R. B. Rebak
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 227 p. ; 28 cm
シリーズ名: PVP ; v. 483
所蔵情報: loading…
目次情報: 続きを見る
PVP2004-2774 Behavior of Shipment Casks Under Explosive Loading / Karine Cheval ; Olivier Loiseau ; Bruno Autrusson ; Jean-Marc Guerin ; Didier Premont
PVP2004-2775 Model Based Structural Evaluation and Design of Overpack Container for Bag-Buster Processing of TRU Waste Drums / Don T. Clark ; Ali S. Siahpush ; Gary L. Anderson
PVP2004-2776 Onsite Packaging and Transport of Tritium Waste / Paul S. Blanton ; T. Kurt Houghtaling
PVP2004-2777 ES-3100: A New Generation Shipping Container for Bulk Highly Enriched Uranium and Other Fissile Materials / Jeffrey G. Arbital ; Gerald A. Byington ; Dean R. Tousley
PVP2004-2778 Welding Plutonium Storage Containers / Stephanie L. Hudlow
PVP2004-2779 Development of a Transportation Package With a Non-Circular Cross Section Containment Vessel for the Transport of Hazardous Evidence / Daniel Leduc ; Allen Smith
PVP2004-2780 Development of a Light Weight Modular Package for the Transport of Hazardous Evidence
PVP2004-2781 An Update on RAMPAC.COM: The Department of Energy's Website for Information on Radioactive Material Packaging / Stephen J. Primeau
PVP2004-2782 Developing Quality Assurance Programs That Satisfy 10 CFR 71, Subpart H and Department of Energy Requirements for Packaging Organizations at Department of Energy Sites / Evelyn M. Ryan ; Edward W. Russell
PVP2004-2783 Radioactive Material Transportation Considerations With Respect to DOE 3013 Storage Containers / S. J. Hensel ; T. T. Wu ; B. R. Seward
PVP2004-2784 Validation of Stress Corrosion Cracking Model for High Level Radioactive Waste Packages / S. C. Lu ; G. M. Gordon ; P. L. Andresen
PVP2004-2785 Pressure Indication of 3013 Inner Containers Using Digital Radiography
PVP2004-2786 Radiolytic Hydrogen G Values for Waste Materials / J. G. McFadden
PVP2004-2787 Monte Carlo Simulations to Determine Failure Temperatures and Pressures for 3013 Outer Can Under Room Fire Conditions / Narendra K. Gupta ; Charles A. McKeel
PVP2004-2788 Drop Test Results for the Combustion Engineering Model No. ABB-2901 Fuel Pellet Shipping Package / Ronald S. Hafner ; Gerald C. Mok ; Lisle G. Hagler
PVP2004-2789 Drop Tests for the 6M Specification Package Closure Investigation / Allen C. Smith ; Lawrence F. Gelder
PVP2004-2790 Response of Ring Closures in Drop Tests of Typical-Weight 6M Packages / Rex N. Lutz
PVP2004-2791 Dynamic Analysis of Radioactive Material Package With Clamp-Ring Closure / Tsu-te Wu
PVP2004-2792 General and Localized Corrosion of Austenitic and Borated Stainless Steels in Simulated Concentrated Ground Waters / David V. Fix ; John C. Estill ; Lana L. Wong ; Raul B. Rebak
PVP2004-2793 Influence of the Environment on the General Corrosion Rate of Alloy 22 (N06022) / Paul Crook
PVP2004-2794 Determination of the Crevice Repassivation Potential of Alloy 22 by a Potentiondynamic-Galvanostatic-Potentiostatic Method / Kenneth J. Evans
PVP2004-2795 Computer Simulation of a Transportation Package Impacting Concrete and Soil Targets / S. N. Huang ; S. S. Shiraga ; L. M. Hay
PVP2004-2796 The State of Stress Transportation Packages During Hypothetical Accident Free-Drop Impact
PVP2004-2797 CAFE-3D: A Fast Running Computational Tool for Analysis of Radioactive Material Packages in Fire Environments / Narendra Are ; Miles Greiner ; Ahti Suo-Anttila
PVP2004-2798 Rupture Testing of A-106, Grade B Steel Pipes Repaired With Carbon/Epoxy Composites / Jeffrey M. Wilson ; Michael R. Kessler ; Joshua M. Duell
PVP2004-2799 Revision of NNSA Packaging Certification Division's Safety Guide 100 (SG-100) / Matthew R. Feldman
PVP2004-2800 Acquisition of Equipment and Services for Transporting SNF and HLW to the Federal Repository / William H. Lake ; Ned Larson ; Nancy Slater-Thompson ; Michael Valenzano
PVP2004-2801 Technology Development to Support OCRWM Transportation Activities / Franchone Oshinowo
PVP2004-2802 Preliminary Elevated Strain Rate Material Testing to Support Accidental Drop Analyses of Radioactive Material Containers / Spencer D. Snow ; D. Keith Morton ; Tommy E. Rahl ; Robert K. Blandford ; Thomas J. Hill
PVP2004-2803 Fernald Silos 1 & 2 Stabilized Waste Transport and Disposal Packages / Mike J. Ahearn ; Samuel D. Pearson ; Charles R. Witt
PVP2004-2804 Spent Nuclear Fuel Structural Response When Subject to an End Impact Accident / Harold E. Adkins Jr. ; Brian J. Koeppel ; David T. Tang
PVP2004-2805 Impact Simulation of Radioactive Material Package During Forklift Truck Collision
Author Index
PVP2004-2774 Behavior of Shipment Casks Under Explosive Loading / Karine Cheval ; Olivier Loiseau ; Bruno Autrusson ; Jean-Marc Guerin ; Didier Premont
PVP2004-2775 Model Based Structural Evaluation and Design of Overpack Container for Bag-Buster Processing of TRU Waste Drums / Don T. Clark ; Ali S. Siahpush ; Gary L. Anderson
PVP2004-2776 Onsite Packaging and Transport of Tritium Waste / Paul S. Blanton ; T. Kurt Houghtaling
38.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Chiaki Miyasaka ; contributing editors, Y. Okono ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  viii, 248 p. ; 28 cm
シリーズ名: PVP ; v. 484
所蔵情報: loading…
目次情報: 続きを見る
Ultrasonic Nde in Pipe Inspection
PVP2004-2806 A Novel Method of Estimating the Aspect Ratio of Pipe Wall Thickness to Diameter Utilizing the Characteristics of a Hollow Cylindrical Guided Wave / Hideo Nishino ; Noriyoshi Chubachi ; Hideo Cho ; Mikio Takemoto
PVP2004-2807 Time Frequency Domain Analysis of the Dispersion of Guided Wave Modes / Youn-Ho Cho ; Yong-Kwon Kim ; Ik-Keun Park
PVP2004-2808 Circumferential Guided Wave Inspection for a Defect at Inner Surface of a Pipe / Takahiro Hayashi ; Hisashi Nagamizo ; Shinya Nakamura ; Morimasa Murase ; Koichiro Kawashima
PVP2004-2809 Health Monitoring of Piping Weld With Guided Waves / Younho Cho ; Chong Myoung Lee ; Joseph L. Rose ; Ikkeun Park
PVP2004-2810 Automated Ultrasonic Inspection of Pressure Vessel Welds / Michael Moles ; Simon Labb
PVP2004-2811 Defect Sizing in Pipeline Welds: What Can We Really Achieve?
PVP2004-2812 High S/N Ratio Guided Wave Inspection of Pipe Using Chirp Pulse Compression / Kiyokazu Toiyama ; Takahiro Tsutsumoto ; Takashi Ikeda
PVP2004-2813 Elastic Guided Waves in Composite Pipes / Gregory N. Bogan
PVP2004-2814 Ultrasonic Flexural Torsional Guided Wave Focusing in Pipe / Zongqi Sun
PVP2004-2815 Flaw Classification by Using Artificial Neural Network and Wavelet / Lingqi Li ; Wei Cheng ; Kazuhiko Tsukada ; Koichi Hanasaki
PVP2004-2816 Detection of Corrosion in Insulated Piping Using SH Angle Probe / Tsutomu Kikuchi ; Mitoshi Yotsutsuji ; Yoshikazu Yokono ; Kaoru Nitta ; Yasushi Takagi
PVP2004-2817 Application of Advanced Ultrasonic Technology to Measure Internal Deposit Thickness for Boiler Waterwall Tubes in Thermal Power Plants / Yukio Imaizumi ; Mitsuhiro Sueyoshi ; Toshihiko Furue ; Shizuo Seto ; Tatsuyuki Nagai ; Hiroshi Yamamoto ; Kevin Hara
PVP2004-2818 Nondestructive Evaluation of Concrete Structures by Laser Ultrasonic Method / Shigenori Akamatsu ; Tomosumi Kamimura ; Katsunori Yokoi ; Haruya Shiba ; Toshihiro Tanizawa ; Shigeaki Uchida ; Oleg G. Kotiaev
PVP2004-2819 Evaluation of the Rolling Direction Effect in the Acoustoelastic Properties for API 5L X70 Steel Used in Pipelines / Auteliano A. Santos ; Don E. Bray ; Sidney F. Caetano ; Marcilio Haddad Andrino ; Roseana E. Trevisan
PVP2004-2820 Ultrasonic In-Situ Monitoring of Aluminum Alloy During Solidification and Melting / Ikuo Ihara ; Dikky Burhan ; Yoshihisa Seda
PVP2004-2821 An Investigation on Monitoring Methods of Creep Damage Using Ultrasonic Technique / Yoshihiro Nagano
Transducer Development
PVP2004-2822 Development of a Focused Ultrasonic Transducer for the Testing of the Wheel Seat in the Hollow Axle of Shinkansen Vehicles / Yorinobu Murata ; Hiroki Toda ; Masataka Ikeda ; Yoshiyuki Nii ; Jiro Yohso
PVP2004-2823 Design and Performance of a Broadband 10mhz Transducer for Elevated Temperature, Leave-in-Place Applications / Michael Pedrick ; B. R. Tittmann ; Jim Seliga
PVP2004-2824 Non-Contact Tube Inspection Technique Using Laser Generation of Guided Wave and Its Reception by Air-Coupled Transducer / Kyung-Young Jhang ; Hyun-Mook Kim ; Hong-Joon Kim ; Yob Ha
PVP2004-2825 Development of a Miniature Portable X-Ray Instrument for the Non-Destructive Measurement of Stresses / C. O. Rund
Residual Stress Measurement
PVP2004-2826 Effect of Sputtering Gas Pressure and Bias Voltage on Mechanical Properties of TiN Coating Deposited by DC Magnetron Sputtering / Hirotaka Tanabe ; Yoshio Miyoshi ; Tohru Takamatsu ; Hitoshi Awano ; Takaaki Yamano
PVP2004-2827 Determination of Compressive Residual Stresses Using Critically Refracted Longitudinal (LCR) Waves / Farid Belahcene ; Jian Lu ; Fabien Thomas ; Xiaolai Zhou
PVP2004-2828 Application of 3D X-Ray CT to Stress Simulation Analysis of Porous Materials With Homogenization Method / Yasuo Nagano ; Yasushi Ikeda ; Hiroshi Kawamoto
PVP2004-2829 Ultrasonic Stress Measurement in Welded Component by Using LCR Waves: Analysis of the Microstructure Effect / H. Walaszek ; J. Hoblos ; G. Bourse ; C. Robin ; P. Bouteille ; H. P. Lieurade
Advances in Radiography
PVP2004-2830 Evaluation of Fatigue Damage in Coarse-Grained Aluminum With Scanning X-Ray Energy Dispersive Diffraction Microscope / Yoshinori Hosokawa ; Kenichi Oborii
PVP2004-2831 Digital Image Acquisition Method for Film Based Radiographic Testing / Masako Mori ; Tetsuo Taguchi ; Mikio Takagi ; Yoshimitsu Aoki
PVP2004-2832 Image Subtraction Method in Digital Radiography of Welding / Yasutoshi Mizuta
EMAT
PVP2004-2833 Locomotive Wheel Inspection With EMAT Technology / S. Jayaraman
PVP2004-2834 Characterization of SH Wave Electromagnetic Acoustic Transducer (EMAT) at Elevated Temperature / Yang Xu ; Akihiro Tagawa ; Masashi Ueda ; Takuya Yamashita ; Yusuke Ohtsuka ; Kazunori Osafune ; Masahiro Nishikawa
Eddy Current
PVP2004-2835 Crack Sizing of Deep Cracks in Eddy Current Testing Using 3D Electromagnetic Field Analysis / Toshiyuki Takagi ; Tetsuya Uchimoto ; Hisashi Endo
PVP2004-2836 Analytical and Experimental Approaches for the Sizing of Fatigue Cracks in Inconel Welds by Eddy Current Examination / Weiying Cheng ; Ichirou Komura ; Mitsuharu Shiwa
PVP2004-2837 Finite Element Simulations of the Remote Field Eddy Current Signal in Steam Generator Tubes of Monju Fast Breeder Reactor / Ovidiu Mihalache ; Yoshiyuki Imai
Other Nde Techniques
PVP2004-2838 Influence of Ultrasonic Incident Angle and Defect Detection Sensitivity by Cast Stainless Steel Structure / Yasuo Kurozumi
PVP2004-2839 Leak Detection of the Pipeline Using Acoustic Emission Technique / Min-Rae Lee ; Joon-Hyun Lee
PVP2004-2840 Methodology of Digital Image Acquisition and Digital Inspection for Liquid Penetrant and Magnetic Particle Testing / Michiaki Kurosaki
PVP2004-2841 New Crack Detection Method by Using Electromagnetic Wave / Hidetoshi Hashizume ; Takuya Shibata ; Kazuhisa Yuki ; Takahiro Yoshioka
PVP2004-2842 Degradation Estimation of 2.25CR-1Mo Steel by Barkhausen Noise Method
PVP2004-2843 Fatigue Damage Evaluation in CFRP Woven Fabric Composites Through Dynamic Modulus Measurements / Hideaki Kasano ; Osamu Hasegawa ; Chiaki Miyasaka
Author Index
Ultrasonic Nde in Pipe Inspection
PVP2004-2806 A Novel Method of Estimating the Aspect Ratio of Pipe Wall Thickness to Diameter Utilizing the Characteristics of a Hollow Cylindrical Guided Wave / Hideo Nishino ; Noriyoshi Chubachi ; Hideo Cho ; Mikio Takemoto
PVP2004-2807 Time Frequency Domain Analysis of the Dispersion of Guided Wave Modes / Youn-Ho Cho ; Yong-Kwon Kim ; Ik-Keun Park
39.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Mansoor H. Sanwarwalla ; contributing editors, Georges Bezdikian, Vikram N. Shah
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 196 p. ; 28 cm
シリーズ名: PVP ; v. 487
所蔵情報: loading…
40.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Arne Holdø, Michael Fischer ; contributing editors, M'Hamed Souli ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  2 v. ; 28 cm
シリーズ名: PVP ; v. 485
所蔵情報: loading…
41.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Vernon C. Matzen, Satoshi Fujita ; contributing editors, J.C. Chen ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  2 v. ; 28 cm
シリーズ名: PVP ; v. 486
所蔵情報: loading…
目次情報: 続きを見る
Seismic Structures/Systems: Technologies for Seismic Response, Control, and Mitigation
PVP2004-2898 Seismic Response Prediction of NUPEC's Field Model Tests of NPP Structures With Adjacent Building Effect / J. Xu ; C. Costantino ; C. Hofmayer ; S. Ali
PVP2004-2899 Study on Simplified Models for Coupled Transmission Tower-Line System to Seismic Excitations / Hong-Nan Li ; Wen-Long Shi ; Guo-Xin Wang
PVP2004-2900 Exact Solution of the Base-Isolated Structure With Sliding Type Base Isolator / C. S. Tsai ; Tsu-Cheng Chiang ; Bo-Jen Chen
PVP2004-2901 Exact Solution of the Base-Isolated Structure With Elastomeric-Type Base Isolator
Seismic Structures/Systems: Experimental and Analytical Studies
PVP2004-2902 Experimental Verifications on Seismic Response Control of Tall Structures by Multiple Tuned Liquid Dampers / Ying Jia ; Su-Yan Wang
PVP2004-2903 Effects of Coincident Response of Structures Subjected to Horizontal and Vertical Ground Motions on Evaluation of Peak Response / Tomoyo Taniguchi ; Mitsuru Takeshita
PVP2004-2904 Accuracy of Shock Response in Time History Analysis / Shuenn-Yih Chang
PVP2004-2905 Recent Developments in the Seismic Analysis of Multiply Supported Piping Systems / Abhinav Gupta
PVP2004-2906 An Assessment of Simplified vs. Detailed Methodologies for SSI Analyses of Deeply Embedded Structures / C. Miller ; H. Graves
PVP2004-2907 Critical Soil-Structure Interaction Analysis Considerations for Seismic Qualification of Safety Equipment / Quazi A. Hossain
PVP2004-2908 Preliminary Study on the Fragility of Building Structures in Taiwan / Wen-I. Liao ; Bor-Han Lee ; Chin-Hsiung Loh
PVP2004-2909 Solutions to Design Displacements of Base Isolation Code in Taiwan / Wen-Shin Chen
Seismic Behavior and Design of Tanks
PVP2004-2910 Dynamic Instability of a Cylindrical Shell Structure Subjected to Horizontal and Vertical Excitations Simultaneously / Katsuhisa Fujita ; Taisuke Nosaka ; Tomohiro Ito
PVP2004-2911 Vibration Test of 1/10 Scale Model of Cylindrical Water Storage Tank / Akira Maekawa ; Yasutaka Shimizu ; Michiaki Suzuki
PVP2004-2912 Sloshing Effects on the Seismic Design of Horizontal-Cylindrical and Spherical Vessels / Spyros A. Karamanos
PVP2004-2913 Experimental and Analytical Studies of Rocking Mechanics of Unanchored Flat-Bottom Cylindrical Shell Model Tanks
Seismic Evaluation of Systems, Structures, and Components
PVP2004-2914 An Overview of the Seismic Verification Analyses Performed for Natural Gas Pipeline Networks / Ch. Botsis ; A. Sariyiannis ; G. Anagnostides ; N. Kokavesis
PVP2004-2915 Seismic Capacity of Threaded, Brazed and Grooved Clamped Joints / George Antaki
PVP2004-2916 Application of Earthquake Experience Data as Part of the Seismic Verification of Modified Main Steam Isolation Valve Leakage Pathway Piping / Timothy M. Adams ; Scott Quiggle
PVP2004-2917 Structural Analysis of High-End Server Computer Frames Under Earthquake Loading / Shawn Canfield ; Budy D. Notohardjono
New Techniques for Seismic Testing
PVP2004-2918 A Dynamic Position Measurement Method for Destructive Process of Structures Using Image Processing / Hiroshi Nishizawa ; Satoshi Fujita ; Osamu Furuya
PVP2004-2919 Study on 3-D Measurement Method in Shake Table Tests Using Image Processing Technique: 1st Report--Verification of Synthetic Performance of the Measurement System / Yasushi Niitsu
PVP2004-2920 Study on 3-D Measurement Method in Shake Table Tests Using Image Processing Technique: 2nd Report--Measurement Accuracy in Actual Fracturing Test Using Full Scale Wooden House Model / Tadashi Mikoshiba
PVP2004-2921 A Multi-Path Tolerant Displacement Measurement System Using Radio Wave Phase Differences / Nobuhiro Suzuki ; Atsushi Mogi
Seismic, Shock, and Vibration Isolation
PVP2004-2922 An Estimation Method for First Excursion Probability of Nonlinear System Using Maximum Response / Shigeru Aoki
PVP2004-2923 Low Cost Friction Pendulum-Type Earthquake Isolation Device With Poly-Curvature Suitable for Light-Weight Equipment / Hiroshi Kurabayashi ; Hiromichi Yamamoto
PVP2004-2924 Study on the Newly Developed 3-Dimensional Base Isolation System Using a Velocity Reduction Mechanism / Takeshi Ohkubo
PVP2004-2925 Compressive Stiffness Verification of Stirrup Rubber Bearing
Author Index
PVP2004-2926 Survey of Aging for LRB of a Base-Isolated Building Completed 15 Years Ago / Ikuo Shimoda ; Ikenaga Masayoshi ; Masami Mochimaru ; Mitsuru Miyazaki ; Shinichi Sakuraba ; Koichi Masuda ; Tomotaka Wake
PVP2004-2927 Elevators Compatible to Intermediate-Floors Base Seismic Isolation Building / Koichi Miyata ; Yuji Sekiya ; Masayuki Shigeta
PVP2004-2928 Hysteretic Restoring Force Characteristics of High Damping Rubber Bearings Under High Compressive Stress / Yasuhiro Kasahara ; Shigenobu Suzuki ; Takashi Kikuchi
PVP2004-2929 Study on Vertical Component Seismic Isolation System With Coned Disk Spring / S. Kitamura ; M. Morishita ; S. Moro
PVP2004-2930 Development of Three-Dimensional Seismic Isolation Technology for Next Generation Nuclear Power Plant in Japan / K. Inoue ; T. Fujita
PVP2004-2931 Study of Three-Dimensional Seismic Isolation System for Next-Generation Nuclear Power Plant: Hydraulic Three-Dimensional Base Isolation System / Takahiro Shimada ; Tatsuya Fujiwaka ; Satoshi Moro
PVP2004-2932 Three-Dimensional Seismic Isolation Device With Rolling Seal Type Air Spring / Tetsuya Hagiwara ; Junji Suhara
PVP2004-2933 Study on Three-Dimensional Seismic Isolation System for Next Generation Nuclear Power Plant: Independent Cable Reinforced Rolling-Seal Air Spring / Mitsuru Kageyama ; Yoshihiko Hino
Passive Energy Dissipation and Active Control
PVP2004-2934 Multi-Axial Hysteretic Models of Laminated Rubber Bearings / Junji Yoshida ; Masato Abe ; Yozo Fujino
PVP2004-2935 Fundamental Study of Active Mass Damper for Improving Livability of Houses Against Traffic Vibration / Yukito Matsumoto ; Osamu Hasegawa ; Kazuto Seto
PVP2004-2936 Fundamental Study of Active Mass Damper for Improving Livability of Houses Against Traffic Vibration: Substantiation Test / Jyunji Okabe ; Toyohiko Higashida
PVP2004-2937 An Experimental Study of Base Isolation Devices Using Shape Memory Alloy Wires / Yoshitaka Yamashita ; Arata Masuda ; Akira Sone
PVP2004-2938 Vibration Control of Structures by Using Multi-Degree-of-Freedom Dynamic Absorber / Daisuke Iba
PVP2004-2939 Whirl Vibration Control of Winder by Using Simply Supported Dynamic Absorber / Shinsuke Tsutsui
PVP2004-2940 Vibration Control Performance of Damping Coupled Tuned Mass Dampers / Nobuo Masaki ; Hisashi Hirata
PVP2004-2941 High Performance Passive Dampers With Ingenious Hydraulic Valve System / Yoshinori Matsunaga ; Jun Tagami ; Haruhiko Kurino ; Toshikazu Yamada
New Evaluation and Analysis Methods in Seismic Engineering
PVP2004-2942 Structural Assessment System for Damage and Degradation: Two-Stage Damage Identification Based on Neural Networks and Improved MDLAC Method / Koji Tsuchimoto ; Naoaki Wada ; Yoshikazu Kitagawa
PVP2004-2943 Wavelet-Based Damage Detection of Multi-Degree-of-Freedom Structures / Yuito Hashimoto
PVP2004-2944 Detection and Identification of Bridges Considering Soil Effect / Jun-Ping Pu ; Yao-Min Fang ; Hung-Ren Chen ; Jian-Fa Huang
PVP2004-2945 A Proposed Method for Anticipated-Allowable Piping, Mechanical and Seismic Nozzle Load Design
Seismic Qualification of Systems, Structures, and Components
PVP2004-2946 Dynamic Characteristics of Structure With Bolted Joint Considering Some Factors
PVP2004-2947 Reduction of First Excursion Probability Due to Plastic Deformation and Absorbed Energy
PVP2004-2948 Study on Nonlinear Vibration of Continuum System With Gaps Considering Energy Dissipated by Collision / Masanori Shintani ; Hiroyuki Ikuta ; Tadashi Kotera
PVP2004-2949 Study on Nonlinear Vibration Characteristic Evaluation of Nonlinear Vibration System With Gaps by Transition Probability Density Function / Hajime Takada
Seismic Testing and Analysis Verification/Validation
PVP2004-2950 Failure Behavior of Elbows With Local Wall Thinning Under Cyclic Load / Izumi Nakamura ; Akihito Otani ; Masaki Shiratori
PVP2004-2951 Introduction of E-Defense Project With Recent Progress: A 3-D Full-Scale Earthquake Testing Facility Under Construction / Nobuyuki Ogawa ; Koichi Kajiwara ; Masayoshi Sato
PVP2004-2952 Seismic Proving Test of Ultimate Piping Strength: Design Method Confirmation Test / Kenichi Suzuki ; H. Abe ; Kohei Suzuki
PVP2004-2953 Reduction of Residual Stress of Welded Joint Using Random Vibration / Tadashi Nishimura ; Tetsumaro Hiroi
PVP2004-2954 Seismic Proving Test of Ultimate Piping Strength: Ultimate Strength Test
PVP2004-2955 Experimental Study on Shaking Table Control Using Adaptive Control / Yuichiro Shinohara ; Nobuyuki Shimizu ; Eiji Sato
PVP2004-2956 Component Test of the Full Scale MFPS Base Isolator / Mei-Jou Chen
PVP2004-2957 Computation of Input Energy to Test Structure on Shaking Table Test / Hiroyuki Fuyama ; Chiaki Yasuda ; Shinichiro Kajii ; Makoto Sakuno
Technologies for Seismic Mitigation
PVP2004-2958 Component Test and Mathematical Modeling of Advanced Unbounded Brace / Shih-Hsien Yu
PVP2004-2959 Analysis and Experiment on the Effect of Seismic Protection of Buildings by High Damping Rubber Bearings
PVP2004-2960 Passive Control of Seismic Response of Piping Systems / Y. M. Parulekar ; G. R. Reddy ; K. K. Vaze ; K. Muthumani
Seismic Structures/Systems: Technologies for Seismic Response, Control, and Mitigation
PVP2004-2898 Seismic Response Prediction of NUPEC's Field Model Tests of NPP Structures With Adjacent Building Effect / J. Xu ; C. Costantino ; C. Hofmayer ; S. Ali
PVP2004-2899 Study on Simplified Models for Coupled Transmission Tower-Line System to Seismic Excitations / Hong-Nan Li ; Wen-Long Shi ; Guo-Xin Wang
42.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, L.I. Ezekoye ; contributing editors, J. Farquharson, B.O. Al-Bedoor, Lily Sweet
出版情報: New York : American Society of Mechanical Engineers, c2004  vii, 214 p. ; 28 cm
シリーズ名: PVP ; v. 488
所蔵情報: loading…
目次情報: 続きを見る
Risk and Reliability
Introduction / John A. Farquharson
PVP2004-2998 A Structured Approach to Resource Allocation / Terry F. Bott ; Stephen W. Eisenhawer
PVP2004-2999 Reliability of the Tube Hydroforming Process Using Fuzzy Sets Theory / Bing Li ; Don R. Metzger ; Tim J. Nye
PVP2004-3000 Application of a Multi-Objective Optimization to Risk-Based Inservice Testing / Juksanee Virulsri ; Shinsuke Sakai ; Satoshi Izumi ; Atsushi Iwasaki
PVP2004-3001 Laboratory Scale Experimental Simulation of a Pipe Rested on a Saddle Supporting System for Verification of Numerical Modeling / Boris Blyukher ; Tadeusz Niezgoda ; Jerzy Malachowski ; Wieslaw Szymczyk ; St. Ochelski ; A. Kiczko
PVP2004-3002 Case Study of the Use of API 581 on HK and HP Material Furnace Tubes / Soudabeh A. Noori ; John Price
PVP2004-3003 An Approach for Cost Effective Assessment in Risk-Based Maintenance as a Life-Cycle Maintenance (LCM) Model / Masataka Yatomi ; Akio Fuji ; Noriko Saito ; Toshiaki Yoshida
PVP2004-3004 An Integrated Approach for the Structural Reliability Evaluation of Fast Breeder Reactor Components / Tai Asayama ; Nobuchika Kawasaki ; Masaki Morishita
Component Analysis and Evaluation
PVP2004-3005 Optimizing Neural Networks for Leak Monitoring in Pipelines / L. Ike Ezekoye ; Karen L. McElhaney ; Ayman H. Kassem ; Ihab G. Adam
PVP2004-3006 Modeling Gas-Liquid Head Performance of Electrical Submersible Pumps / Datong Sun ; Mauricio Prado
PVP2004-3007 A Structural Integrity Evaluation for the Interference-Fit Flywheel of Reactor Coolant Pump / J.-S. Park ; H.-C. Song ; K.-S. Yoon ; T.-S. Choi ; J.-H. Park
PVP2004-3008 Field Vibration Tests and Dynamic Stability Analysis of a Full-Scaled Tainter-Gate / Keiko Anami ; Noriaki Ishii ; Charles W. Knisely
PVP2004-3009 On the Governing Contingency for Pressure-Relief Device Sizing / W. E. Short II
PVP2004-3010 High Pressure Fluctuations Induced by Safety Valves Operating With Liquids at Very Low Lift / V. Dossena ; F. Marinoni ; S. Di Vincenzo ; A. Boccazzi ; R. Sala
PVP2004-3011 Two-Phase Flow Through a Relief Valve Discharing Into a Water Filled Pipe / L. I. Ezekoye ; T. J. Matty ; S. R. Swantner
PVP2004-3012 Theoretical Investigation on Flow Rate at the Maximum Efficiency Point in the Design of Impeller Blade in Centrifugal Pump / Takaharu Tanaka
Maintenance and Machinery Health Monitoring
PVP2004-3013 A Forced Vibration Response-Based Damage Identification Method for Cylindrical Shells / Usik Lee ; Sunghwan Kim ; Jooyong Cho
PVP2004-3014 Model for Vibration of Rotating Beams Supported by Flexible Foundation and Driven by DC Motor / A. Abed ; B. O. Al-Bedoor ; A. A. Al-Qaisia
PVP2004-3015 On the PD Control of Rotating Flexible Arms Driven by Stepper Motor / S. Zahi Ismail
Risk-Based Inspection Application and Experience in Diverse Industries and Sis Application to High Pressure Pipelines and Pressure Vessels
PVP2004-3016 Developing an Efficient, Predictive, Risk Based Inspection/Maintenance Program for Recovery and Power Boilers / Lily Sweet ; Rick Peterson
PVP2004-3017 Application of Risk-Based Inspection and Maintenance Planning to a Range of Power Generation Equipment / David Worswick ; George Tan ; Ahmad Badrol
PVP2004-3018 Pressure Vessel Management: A Plant Perspective / Walter A. Almon
PVP2004-3019 Risk-Based Inspection as a Reliability-Engineering Tool for Fixed Equipment Decisions / Tony Poulassichidis
PVP2004-3020 Plant Asset Management: RIMAP (Risk-Based Inspection and Maintenance for European Industries)--The European Approach / Robert Kauer ; Aleksandar Jovanovic ; Sture Angelsen ; Gjermund Vage
PVP2004-3021 High Integrity Protection Systems / Angela E. Summers ; Bryan A. Zachary
PVP2004-3022 The Assignment of SIL Targets to Overpressure Protection in Reactive Systems / Kimberly A. Dejmek ; Ken A. Wehrman
PVP2004-3023 Justifying the Use of High Integrity Pressure Protection Systems (HIPPS) / Edward M. Marszal ; Kevin J. Mitchell
Author Index
Risk and Reliability
Introduction / John A. Farquharson
PVP2004-2998 A Structured Approach to Resource Allocation / Terry F. Bott ; Stephen W. Eisenhawer
43.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, F.J. Moody ; contributing editors, J.C. Jo ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 213 p. ; 28 cm
シリーズ名: PVP ; v. 489
所蔵情報: loading…
目次情報: 続きを見る
Transient Thermal-Hydraulic Loads in Vessels, Piping, and Components
Introduction / Fred J. Moody ; Jong Chull Jo
PVP2004-3024 Root Cause Evaluation on Suction Piping Vibration of Auxiliary Feedwater Pump / Chang-Bin Jeon ; Byoung-Hwa Choi ; Mun-Baek Park
PVP2004-3025 Flow in the Converging Mini-Channels / Sarng Woo Karng ; Yoon Pyo Lee ; Jin-Ho S. Kim
PVP2004-3026 Analysis on the Dynamic Load in a Water Pool During Air Discharge From Submerged Sparger / Ken Uchida ; Takeshi Shimizu ; Mitsuo Komuro ; Masatomo Kuroda ; Seijiro Suzuki
PVP2004-3027 A Numerical Simulation of Thermal Stripping in an Upper Plenum of a Liquid Metal Reactor / Seok-Ki Choi ; Eui-Kwang Kim ; Myung-Hwan Wi ; Won-Dae Jeon ; Seong-O Kim
PVP2004-3028 Numerical Simulation of Turbulence Mixing Characteristic in Various Secondary Flow Conditions at T-Junction Piping Systems / Masa-aki Tanaka ; Toshiharu Muramatsu
PVP2004-3029 A Simple Predictive Method of Steam Pipe Forces From Stop Valve Closure / Kellie Norton ; F. J. Moody
PVP2004-3030 Modelling Two-Phase Flow in Pipe Bends / S. Supa-Amornkul ; F. R. Steward ; D. H. Lister
PVP2004-3031 Thermal Interaction From Hot Liquid Entering a Cold Pipe / D. Galbally
PVP2004-3032 Investigation of Steam Desuperheater Waterhammer / Gregory Zysk
PVP2004-3033 Numerical Prediction of Homologous Curves for the SMART MCP / Min-Hwan Kim ; Jong-In Kim ; Dong-Ok Kim ; Jae-Seon Lee ; Jin-Seok Park
PVP2004-3034 A Study of Flow-Induced Grid-to-Rod Fretting Wear in PWR Fuel Assemblies / Kyu-Tae Kim ; Young-Ki Jang ; Joon-Hyung Choi ; Sang-Soon Lee
PVP2004-3035 Transient Heat Transfer Analysis to Evaluate the Voiding of the Containment Emergency Cooling Units for PWR (Pressurized Water Reactor) Nuclear Plant Following a Pipe Break Accident / S. Mahmood Husaini ; Riyad K. Qashu
PVP2004-3036 Prediction of Foreign Object-Caused Fretting-Wear on Helical Tubes in the Single-Phase External Flow Field / Myung Jo Jhung ; Woong Sik Kim ; Hho Jung Kim
PVP2004-3037 Stratified Flow Experiments Pertaining to Advanced LWR Reactor Passive Safety System Designs / Jim C. P. Liou ; Alan G. Stephens ; Richard R. Schultz
PVP2004-3038 A RELAP5/MOD3 Model for the Estimation of Air Pull-Through for a Draining Tank / D. S. Lucas ; R. Riemke
PVP2004-3039 Blowdown/Jet Impingement Force-Time History / Donald Katze
Fluid-Structure Interaction and Sloshing
PVP2004-3040 Underwater Explosion in a Pool and Damage Assessment: A Global Approach From Far-Field to Close Range / D. C. Ma ; O. Loiseau ; K. Cheval ; B. Autrusson
PVP2004-3041 The Sensibility of Rocking Motion of Flat-Bottom Cylindrical Shell Tanks to Sloshing Motion / Tomoyo Taniguchi
PVP2004-3042 Work of Shaking Table / Chikahiro Minowa ; Toshio Chiba
PVP2004-3043 Dynamic Analysis of a Coupled Fluid Structure Problem With Fluid Sloshing / Jean Francois Sigrist ; Christian Laine ; Bernard Peseux
Structures under Extreme Loading Conditions
PVP2004-3044 A Computational Approach to Assessing Blast Damage in Urban Centers Using AUTODYN / Dale S. Preece ; Mary L. Hughes ; S. E. Jones ; Howard S. Levine ; Malcolm S. Cowler ; Xiangyang Quan ; Greg E. Fairlie
PVP2004-3045 Discrete Element Method for Modeling Penetration / Federico A. Tavarez ; Michael E. Plesha
PVP2004-3046 Strength Estimates for High Velocity Penetration of Geological Targets by the Compaction Ring Theory / D. Zach Nuckols
PVP2004-3047 Dynamic Buckling and Instability in Soil and Sand Penetration / M. L. Hughes ; T. G. McCann ; K. M. Haydel
PVP2004-3048 Finite Element Modeling of Brinell and Rockwell Hardness Testing of Metals / William Keith Rule
PVP2004-3049 Peridynamic Modeling of Impact Damage / S. A. Silling ; E. Askari
PVP2004-3050 Bullet Impact on Steel and Kevlar/Steel Armor: Computer Modeling and Experimental Data / Vanessa S. Berg
Author Index
Transient Thermal-Hydraulic Loads in Vessels, Piping, and Components
Introduction / Fred J. Moody ; Jong Chull Jo
PVP2004-3024 Root Cause Evaluation on Suction Piping Vibration of Auxiliary Feedwater Pump / Chang-Bin Jeon ; Byoung-Hwa Choi ; Mun-Baek Park
44.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, T. Tahara ; contributing editors, G. Bezdikian ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  vii, 285 p. ; 28 cm
シリーズ名: PVP ; v. 490
所蔵情報: loading…
目次情報: 続きを見る
Materials - Components - Expertise for Solution of Problem
PVP2004-3051 The BWRVIP Integrated Surveillance Program / Robert G. Carter ; Timothy J. Griesbach ; Timothy C. Hardin
PVP2004-3052 Irradiation Hardening of Austenitic Stainless Steels: From Field Experience to Modeling / C. Pokor ; Y. Thebault ; C. Pujol ; J.-P. Massoud ; D. Loisnard ; E. Lemaire ; Ph. Dubuisson ; Y. Brechet
PVP2004-3053 Assessment of U.S. Embrittlement Trend Equations Considering the Latest Available Surveillance Data / William L. Server ; Randy G. Lott ; Stan T. Ronsinski
PVP2004-3054 Experimental Program to Monitor the Irradiation Induced Embrittlement of the French Reactor Pressure Vessel Steels / Guillaume Chas ; Nathalie Rupa ; Josseline Bourgoin ; Astrid Hotellier ; Sebastien Saillet
PVP2004-3055 Aging Management Strategies for Pressurized Water Reactor Vessel Internals / Robert E. Nickell ; H. T. Tang ; Jeff D. Gilreath III
PVP2004-3056 Manufacturing and Properties of Closure Head Forging Integrated With Flange for PWR Reactor Pressure Vessel / Komei Suzuki ; Etsuo Murai ; Yasuhiko Tanaka ; Iku Kurihara ; Tomoharu Sasaki ; Yoichi Koyama
PVP2004-3057 Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steels in Laboratory Primary PWR Environment / Francois Vaillant ; Thierry Couvant ; Jean-Marie Boursier ; Claude Amzallag ; Yves Rouillon ; Olivier Raquet
PVP2004-3058 Microstructural Banding and Biaxial Fracture Toughness Tests in a Specially Heat-Treated Reactor Pressure Vessel Steel / Randy K. Nanstad ; Mikhail A. Sokolov ; Philip J. Maziasz
PVP2004-3059 HHV (Hitachi Hyper Valve) Corrosion Resistant, Withstands Erosion and Low CO Release / Yoshihisa Kiyotoki ; Mutuo Chigasaki
PVP2004-3060 Elaboration and Introduction of the Methodics on Non-Destructive Inspection (Control) of Physical-Mechanical Properties of NPP Pressure Vessels / M. Bakirov ; V. Potapov ; N. Zabruskov ; I. Vystavkin ; V. Levchuk
PVP2004-3061 Weldability, Thermal Aging and PWSCC Behavior of Nickel Weld Metals Containing 15 to 30% Chromium / J. M. Boursier ; F. Vaillant ; B. Yrieix
PVP2004-3062 A Probabilistic Approach to Heatup and Cooldown Operating Limits for a Nuclear Pressure Vessel
PVP2004-3063 The Practical Application of 36% Ni Steel Piping in LNG Plants / Eiichi Yamamoto ; Kentaro Sakata ; Nobutaka Seo ; Kazushi Enuma ; Seiichi Uchino ; Yoshiaki Murakami ; Toshifumi Kojima
PVP2004-3064 Manufacture of Advanced 2.25Cr-1Mo-V Pressure Vessel Steel for High Pressure and High Temperature Hydrogen Service / T. Hasegawa ; A. Narita ; H. Iga ; S. Inoue
PVP2004-3065 Corrosion Damages on Piping System and Problems of the Inspection Maintenance / Yasuhiro Hara ; Yoshikazu Yokono
PVP2004-3066 Corrosion of Aluminized Steel in Seawater / Hiroki Kimoto
PVP2004-3067 Long-Term Isothermal Aging Behavior of V-Modified 2.25Cr-1Mo Steels / H. Yaguchi ; S. Murakami ; N. Fujitsuna ; T. Shinya ; M. Yamada ; T. Sakai
Storage Tank Integrity Analysis and Fitness for Service
PVP2004-3068 Global Assessment System for Structural Safety in Large Size Storage Tanks / Shinichi Kaita ; Toshikazu Shibasaki ; Takayasu Tahara
PVP2004-3069 Building a Real Time System for Evaluating Oil Storage Tank Damage Due to Earthquakes in Petroleum Stockpiling Bases / Shinsaku Zama ; Makoto Endo ; Ken Hatayama ; Shoichi Yoshida ; Kazuma Kawano ; Kazuyoshi Sekine ; Hiroaki Maruyama
PVP2004-3070 Study on Restoring Force Models of Nonlinear Uplift Behavior of Unanchored Oil Storage Tank Under Strong Seismic Excitation / Hai Yuan
PVP2004-3071 FEM Stress Analysis and the Sealing Performance Evaluation in Stainless Steel Elbow and Tee Fittings Under Internal Pressure: Case Where Internal Fluid Is Liquid / Toshiyuki Sawa ; Hideaki Shimazu
PVP2004-3072 A Study on the Stress Interaction Between Annular Plate and Foundation of the Oil Storage Tank / Itsuo Kawama
PVP2004-3073 Behavior of Localized Bottom Depression in Aboveground Oil Storage Tanks Under Liquid Pressure
PVP2004-3074 Development of Diagnostics Evaluation Method for Shell-to-Annular Joint of the Oil Tank Under Ultra Low Cycle Fatigue / Satoshi Igi ; Masanori Kawahara ; Kazuysohi Sekine
PVP2004-3075 The Damage of the National Oil Storage Bases by the 2003 Tokachi-Oki Earthquake
PVP2004-3076 Liquid Sloshing of Oil Storage Tanks and Long-Period Strong Ground Motions in the 2003 Tokachi-Oki Earthquake
Innovative Pipeline Systems Technologies
PVP2004-3077 Assessing the Effects of Vibratory Loading on Pipelines Using Analysis and Monitoring Techniques / Chris Alexander ; Dave Runte ; Randy Long
PVP2004-3078 Plastic Collapse Assessment of Unequal Wall Joints in Pipeline Transitions / Xian-Kui Zhu ; Brian N. Leis
PVP2004-3079 Structural Integrity Assessment for Various Failure Modes Using a Risk-Based Maintenance Method / Hiroyuki Horikawa ; Masaki Yoshikawa ; Nobuo Takasu
PVP2004-3080 Neuro-Fuzzy Approaches for FRP Oil and Gas Pipeline Condition Assessment / S. Kumar ; F. Taheri
PVP2004-3081 Remote Monitoring Systems for Detection of Contact by Unauthorized Construction Equipment and the Cathodic Protection Condition on Buried Pipelines / Shozo Hatanaka ; Masahiko Tange ; Morio Sumiyama
Author Index
Materials - Components - Expertise for Solution of Problem
PVP2004-3051 The BWRVIP Integrated Surveillance Program / Robert G. Carter ; Timothy J. Griesbach ; Timothy C. Hardin
PVP2004-3052 Irradiation Hardening of Austenitic Stainless Steels: From Field Experience to Modeling / C. Pokor ; Y. Thebault ; C. Pujol ; J.-P. Massoud ; D. Loisnard ; E. Lemaire ; Ph. Dubuisson ; Y. Brechet
45.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, S. Kawano, C.R. Kleijn, V. Kudriavtsev
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  2 v. ; 28 cm
シリーズ名: PVP ; v. 491, 1&2
所蔵情報: loading…
46.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Young W. Kwon, Howard H. Chung
出版情報: New York : American Society of Mechanical Engineers, c2001  v, 163 p. ; 28 cm
シリーズ名: PVP ; v. 432
所蔵情報: loading…
目次情報: 続きを見る
Stress Intensity Factors and Paths for Cracks in Photoelastic Motor Grain Models Under Internal Pressure / C. W. Smith ; D. M. Constantinescu ; C. T. Liu
Effect of Hydrostatic Pressure on Damage in Particulate Composites / Y. W. Kwon
Estimating the Initial Crack Size in a Particulate Composite Material: An Analytical and Experimental Approach
Experimental Evaluation of Fatigue Parameters Using Constant K Fracture Specimens / R. Cammino ; M. Gosz ; S. Mostovoy
Free-Vibration of Rotating Composite Beams Incorporating Higher-Order Transverse Shear Effects / N. K. Chandiramani ; L. I. Librescu ; C. D. Shete
On a Model of a Ball in Cluster Impact Problems in Granular Mechanics / Oleg Vinogradov
Biodynamics of Human Thorax With Body Armors Subject to Bullet Impact / J. A. Lobuono
Comparative Analysis of Implant Effectiveness in Maintaining the Stability of the Reverse Obliquity Hip Fracture / Kevin A. Kerr ; Javad Hashemi ; Jordan Post ; Khai Ngo ; Eugene Dabezies
The Effect of Precipitation Aging on the Mechanical Behavior and Microstructure of Aluminum-Lithium Alloys / James M. Fragomeni
Analysis of Curved Beams by the B-Spline Field Approximation Method / A. H. Vermeulen ; G. R. Heppler
Laying Modelling of Submarine Pipelines Using Contact Elements Into a Corotational Formulation / C. Martinez ; Raul Goncalves
Probabilistic HCF Life Estimation of a Mechanical Component / Murari P. Singh
Semi-Analytical Modeling of Progressive Damage in Twill Woven Textile Composites / Pramod Chaphalkar ; Ajit D. Kelkar
Strength and Stiffness of Aluminum/PTFE Reactive Composites / A. Saigal ; V. S. Joshi
Investigation of Nanomechanical Properties of the Interphase in a Fiber Reinforced Plastic Composite / Sanjeev K. Khanna ; Robb M. Winter ; P. Ranganathan ; S. B. Yedla ; K. Paruchuri
Corrosion Resistance of Structural Steel Processed Using Electro-Plasma Methods / Paul J. Schilling ; Paul D. Herrington
Material Considerations in Optimization of Machine Tool Structure / Emmanuil F. Kushnir ; Mahendra R. Patel ; Terrence M. Sheehan
Eigenvalue Analysis of Oscillatory Variable State Paper Winder / Sirpa Launis ; Erno Keskinen
Automatic Repetitive Remapping Applied to the Solution of Indirect Extrusion / Rudy R. Verderber
Author Index
Stress Intensity Factors and Paths for Cracks in Photoelastic Motor Grain Models Under Internal Pressure / C. W. Smith ; D. M. Constantinescu ; C. T. Liu
Effect of Hydrostatic Pressure on Damage in Particulate Composites / Y. W. Kwon
Estimating the Initial Crack Size in a Particulate Composite Material: An Analytical and Experimental Approach
47.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Frederick W. Brust
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vii, 248 p. ; 28 cm
シリーズ名: PVP ; vol. 438
所蔵情報: loading…
目次情報: 続きを見る
High Temperature Behavior of Structures and Materials: Introduction / R. A. Ainsworth ; Frederick W. Brust
PVP2002-1190 - Unresolved Issues With Regard to Creep and Creep Fatigue Life Prediction / J. Oh ; N. Katsube ; F. W. Brust
PVP2002-1191 - A Sensitivity Study of Creep Crack Growth in Pipes / K. Wasmer ; K. M. Nikbin ; G. A. Webster
PVP2002-1192 - Crack Opening Areas During High Temperature Operation / S. F. Yellowlees ; D. G. Hooton ; J. K. Sharples ; P. J. Budden ; D. W. Dean
PVP2002-1193 - Creep-Fatigue Damage and Life Evaluation for Boiler Header Stub Weldment / Takuya Ito ; Isamu Nonaka ; Hideo Umaki ; Hidetaka Nishida ; Shizuma Shintani
PVP2002-1194 - Local Failure Modes of a Nuclear Reactor Pressure Vessel Nozzle Under Severe Accident Conditions / Young J. Oh ; Kwang J. Jeong ; Byung G. Park ; II S. Hwang
New and Emerging Computational Methods: Introduction / Sharif Rahman ; Jun Tang ; Y. H. Park
PVP2002-1195 - A New Interaction Integral Method for Mesh-Free Analysis of Cracks in Functionally Graded Materials / B. N. Rao ; S. Rahman
PVP2002-1196 - Material Processing Simulation Using a Meshfree Method / Young H. Park
PVP2002-1197 - Comparative Study of Adaptive Analysis Processes for Automotive Applications / Hui-Ping Wang ; Mark E. Botkin
PVP2002-1198 - A Corotational Flow Rule for Rigid Plastic Hardening Materials Based on Logarithmic Strain Tensor / Reza Naghdabadi ; Mehdi Yeganeh ; Alireza Saidi
PVP2002-1199 - Mesh-Free Simulation in Elastic-Plastic Fracture Mechanics
PVP2002-1200 - An Efficient Algorithm Based on First Order Reliability Method for Fatigue Reliability Analysis of Mechanical Components / Young Ho Park
PVP2002-1201 - Stochastic Meshless Analysis of Elastic-Plastic Cracked Structures
PVP2002-1202 - The Influence of Thermophysical Properties on a Numerical Model of Solidification / Josef Stetina ; Frantisek Kavicka ; Bohumil Sekanina ; Jaromir Heger
PVP2002-1203 - Large Elastic-Plastic Deformation Analysis of Rectangular Plates / Mohsen Shahi
Recent Advances in Fracture and Damage Studies: Introduction / T. Nishioka
PVP2002-1204 - Crack Kinking Criterion for Bimaterial System / Jianliang Yao ; Toshihisa Nishioka ; Takuma Nozaki ; Takehiro Fujimoto
PVP2002-1205 - Assessment of Typical Pipeline Flaws With SINTAP / Rainer Hamann ; Uwe Zerbst
PVP2002-1206 - Evaluation of Coalescence Criteria for Parallel Cracks / Masayuki Kamaya
PVP2002-1207 - Prediction of Fracture and Fatigue Damage in Engineering Structures / Y. Wei ; C. L. Chow
PVP2002-1208 - Fatigue Crack Propagation Analysis of Nozzle Corner Using the Influence Function Method / Mayumi Ochi ; Kiminobu Hojo ; Takeharu Nagasaki
PVP2002-1209 - Fatigue Test Plan to Obtain S-N Curves / Joao Mario Andrade Pinto ; Enrico A. Colosimo ; Tanius Rodrigues Mansur ; Julio Ricardo Barreto Cruz ; Ernani Sales Palma ; Miguel Mattar Neto
PVP2002-1210 - Determination of the Fatigue Limit: Comparison Between Experimental Tests and Statistical Simulations / Wellington Antonio Soares
PVP2002-1211 - Fatigue Threshold Considerations During Crack Propagation / Lichun Bian ; Jae-Kyoo Lim
PVP2002-1212 - Evaluation of Stress-Intensity Factor of Mixed-Mode Crack by Hybrid Speckle Photography / Kenji Machida
PVP2002-1213 - Extending the Local Approach to Fracture: Methods for Direct Incorporation of Microstructural Effects Into Finite Element Models of Fracture / J. H. Beynon ; S. Das ; I. C. Howard ; A. Chterenlikht
PVP2002-1214 - Static Strength Properties of an Aluminum Alloy Honeycomb Sandwich Panel and Strength Reliability Evaluation of an Actual Car Body Structure / Michifumi Takeichi ; Sumio Okuno ; Masato Okazaki ; Hitoshi Tsuruda ; Shunichi Kawano
Author Index
High Temperature Behavior of Structures and Materials: Introduction / R. A. Ainsworth ; Frederick W. Brust
PVP2002-1190 - Unresolved Issues With Regard to Creep and Creep Fatigue Life Prediction / J. Oh ; N. Katsube ; F. W. Brust
PVP2002-1191 - A Sensitivity Study of Creep Crack Growth in Pipes / K. Wasmer ; K. M. Nikbin ; G. A. Webster
48.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Poh-sang Lam
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vii, 187 p. ; 28 cm
シリーズ名: PVP ; vol. 437
所蔵情報: loading…
目次情報: 続きを見る
Application of Fracture Mechanics in Failure Assessment: Introduction / David Lidbury ; Doug Scarth
PVP2002-1169 - Crack Initiation Behaviour in Small Root Radius Zr-2.5Nb Pressure Tube Specimens Under Monotonic and Cyclic Loading Conditions at Ambient Temperature / Edward T.C. Ho ; Rameshwar Choubey ; Gordon K. Shek ; Stefan Sagat ; Douglas A. Scarth
PVP2002-1170 - A Simplified Method for Calculating Crack Opening Area / E. Smith
PVP2002-1171 - The Effect of Plasticity on Process-Zone Predictions of DHC Initiation at a Flaw in CANDU Reactor Zr-Nb Pressure Tubes / Ted Smith
PVP2002-1172 - LBB Assessment on Ferrite Piping Structure of Large-Scale LMFR / Y. S. Yoo
PVP2002-1173 - The Development of Structural Integrity Procedures for the Safe Working of Ceramics Industry Ball Mills with Cast Iron Ends / I. C. Howard ; A. C. Pugh
PVP2002-1174 - Inspection and Evaluation Guidelines for Light Water Reactor Core Internals in Japan / Kimihito Takeuchi ; Naoto Iizuka ; Masashi Kameyama ; Haruo Fujimori ; Yuichi Motora ; Koji Koyama
PVP2002-1175 - Ductile Fracture Behavior of Carbon Steel Cracked Pipes With Moderate-Toughness / Naoki Miura ; Koichi Kashima ; Katsumasa Miyazaki ; Masakazu Hisatsune ; Kunio Hasegawa
PVP2002-1176 - Validation of Constraint Based Methodology in Structural Integrity - VOCALIST: Project Overview / Richard Bass ; Elisabeth Keim ; Surender Bhandari ; David Connors ; Ulrich Eisele ; Karl-Frederick Nilsson
PVP2002-1177 - Validation of Constraint-Based Methodology in Structural Integrity: Current Issues and Best Practice Handbook / K.-F. Nilsson ; N. Taylor ; S. Bhandari ; D. Siegele ; D. Lidbury
PVP2002-1178 - Validation of Constraint Based Methodology in Structural Integrity - VOCALIST: Experimental Programme / Heikki Keinanen ; Stephane Marie ; Andrew Sherry
PVP2002-1179 - Validation of Constraint Based Methodology in Structural Integrity - VOCALIST: Analytical Programme / Wallace McAfee ; Philippe Gilles ; Yves ; Wadier ; Kim Wallin
PVP2002-1180 - A Probabilistic Application of the R6 Detectable Leakage Leak-Before-Break Procedure / D. W. Beardsmore ; S. F. Yellowlees ; J. K. Sharples ; R. A. Ainsworth ; P. J. Budden
PVP2002-1181 - A Comparison of 3-D Finite Element and Simplified Estimates of J Under Thermal and Mechanical Loads / Yuebao Lei
PVP2002-1182 - Application of Local Approach Concept of Cleavage Fracture to VVER Materials / B. Z. Margolin ; G. P. Karzov ; V. A. Shvetsova ; E. Keim ; R. Chaouadi
PVP2002-1183 - Code Based Failure Avoidance Assessments of the NESC-1 Large Scale Pressurised Thermal Shock Experiment / Michael C. Smith
PVP2002-1184 - Limit Load Solutions for Surface Cracks in Plates Under Different Loading Types / Peter Dillstrom ; Iradj Sattari-Far
PVP2002-1185 - Overview of NESC-IV Cruciform Specimen Test Results / R. Bass
Service Experience in Operating Nuclear Plants: Introduction / Warren H. Bamford ; Douglas K. Rodgers
PVP2002-1186 - A Fracture Mechanics Evaluation of Observed Cracking at a BWR-2 Reactor Pressure Vessel Weld / Hardayal S. Mehta ; Ronald M. Horn ; George Inch
PVP2002-1187 - Experiences in Examining and Dispositioning Flaws in Zr-2.5Nb Pressure Retaining CANDU Reactor Components / Andrew Celovsky ; John Slade
PVP2002-1188 - Cracking in Alloy 600/182 Reactor Vessel Head Penetrations / Charles R. Frye ; Tom Alley ; Melvin L. Arey, Jr. ; Michael R. Robinson
PVP2002-1189 - Root Cause Evaluation and Repair of Alloy 82/182 J-Groove Weld Cracking of Reactor Vessel Head Penetrations at North Anna Unit 2 / J. I. Bennetch ; G. E. Modzelewski ; L. L. Spain ; G. V. Rao
Author Index
Application of Fracture Mechanics in Failure Assessment: Introduction / David Lidbury ; Doug Scarth
PVP2002-1169 - Crack Initiation Behaviour in Small Root Radius Zr-2.5Nb Pressure Tube Specimens Under Monotonic and Cyclic Loading Conditions at Ambient Temperature / Edward T.C. Ho ; Rameshwar Choubey ; Gordon K. Shek ; Stefan Sagat ; Douglas A. Scarth
PVP2002-1170 - A Simplified Method for Calculating Crack Opening Area / E. Smith
49.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Ricky D. Dixon
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 83 p. ; 28 cm
シリーズ名: PVP ; vol. 436
所蔵情報: loading…
目次情報: 続きを見る
Methods, Applications, and History
PVP2002-1157 - Recent Advances in High Pressure Food Processing Equipment and Equipment Requirements to Meet New Process Needs / Daniel F. Farkas ; Joseph A. Kapp
PVP2002-1158 - Intensive Quenching Theory and Application for Imparting High Residual Surface Compressive Stresses in Pressure Vessel Components / Michael A. Aronov ; Nikolai I. Kobasko ; Joseph A. Powell ; Andrew M. Freborg ; B. Lynn Ferguson
PVP2002-1159 - From Test Pilot to 20th Century High Pressure Entrepreneur / N. Wayne Walkup
PVP2002-1160 - The Influence of Finite Three Dimensional Multiple Axial Erosions on the Fatigue Life of Partially Autofrettaged Pressurized Cylinders / C. Levy ; M. Perl ; Q. Ma
Global Advancement in High Pressure Design and Analysis
PVP2002-1161 - Comparison of Methods for Calculating Stress Intensity Factors for a Closure Thread / David P. Kendall
PVP2002-1162 - Stress Concentration Factors of Cross-Bores in Thick Walled Cylinders and Square Blocks / Ricky D. Dixon ; Daniel T. Peters ; Jan G. M. Keltjens
PVP2002-1163 - Fatigue Life of Commercial High Pressure Tubing / Michael D. Mann
PVP2002-1164 - Yield Pressure Measurements and Analysis for Autofrettaged Cannons / John H. Underwood ; David B. Moak ; Michael A. Audino ; Anthony P. Parker
Low Density Polyethylene Applications
PVP2002-1165 - Leak-Before-Burst Testing of a High Pressure Tube / Peter Koerner ; Waldemar Hiller ; Rolf Wink
PVP2002-1166 - Development of Materials, Design, Calculation and Testing of High Pressure Equipment, Especially for Low Density Polyethylene Plants / Johannes Schedelmaier ; Manfred Polzl
PVP2002-1167 - High Pressure Safety Relief Valves in Ethylene Service / Bernhard Follmer ; Armin Schnettler ; Philip Cornelissen
PVP2002-1168 - Improving Availability of Hypercompressors / E. Giacomelli ; R. Fani ; S. Pratesi ; L. Gimignani
Author Index
Methods, Applications, and History
PVP2002-1157 - Recent Advances in High Pressure Food Processing Equipment and Equipment Requirements to Meet New Process Needs / Daniel F. Farkas ; Joseph A. Kapp
PVP2002-1158 - Intensive Quenching Theory and Application for Imparting High Residual Surface Compressive Stresses in Pressure Vessel Components / Michael A. Aronov ; Nikolai I. Kobasko ; Joseph A. Powell ; Andrew M. Freborg ; B. Lynn Ferguson
50.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, F.J. Moody
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vii, 289 p. ; 28 cm
シリーズ名: PVP ; vol. 435
所蔵情報: loading…
目次情報: 続きを見る
Current Thermal-Hydraulic Problems In Vessels, Piping, and Components: Introduction / Fred Moody ; Jong Chull Jo
PVP2002-1124 - Internal Damage in a High Pressure Process System by Thermal Hydraulic Forces: A Case History / Sam Brown ; Ian LeMay
PVP2002-1125 - Air Clearing Oscillation Produced by APR 1400 Prototype Sparger / Seok Cho ; Choon-Kyung Park ; Hwan-Yeol Kim ; Se-Young Chun ; Chul-Hwa Song ; Won-Pil Baek
PVP2002-1126 - A Case Study of a Valve Failure due to Condensation-Induced Waterhammer / Henry Harling
PVP2002-1127 - Unit Cell Sparger Test Program and Preliminary Test Results for APR1400
PVP2002-1128 - Numerical Simulation of the HDR Blowdown Experiment V31.1 at Karlsruhe / Lars Andersson ; Per Andersson ; Jan Lundwall ; Jan Sundqvist ; Pascal Veber
PVP2002-1129 - Measurement of Pressure Drop in Inclined Triangular and Rotated Triangular Tube Bundles / Seok-Ki Choi ; II Kon Choi ; Kil Yong Lee ; Ho Yun Nam ; Jong-Hyeun Choi
PVP2002-1130 - Waterhammer Analysis of Fire Protection System due to Draining of High Elevation Headers / S. Mahmood Husaini ; Riyad K. Qashu ; David Y. Arai ; Jeffrey S. Summy
PVP2002-1131 - Effects of Tube Rupture Modeling Methods on MSSV Lift Time Following a MSGTR Event in PWR / Ji Hwan Jeong ; Ki Yong Choi ; Keun Sun Chang
PVP2002-1132 - Acoustic and Structural Modeling of Farley Main Steam Flow-Induced Vibration / Gregory Zysk
PVP2002-1133 - Thermal-Hydraulic Response in the Discharge Piping With Water Pool / Young S. Bang ; Hyung J. Ahn ; In-G. Kim ; Hho J. Kim
PVP2002-1134 - Farley Main Steam Flow-Induced Vibration Investigation / Michael Oliver
PVP2002-1135 - Measurement of Pressure Drop in a Liquid Metal Reactor Fuel Assembly / Seok Ki Choi ; Hoon Ki Choi
PVP2002-1136 - Evaluation of Shutdown Cooling Transients Using Simplified Models
PVP2002-1137 - Numerical Analysis of Unsteady Conjugate Heat Transfer and Thermal Stress for a PWR Pressurizer Surge Line Pipe Subjected to Thermal Stratification / Young Hwan Choi
PVP2002-1138 - An Investigation of High Pressure Coolant Injection (HPCI) Line Dynamic Transient at Dresden Nuclear Generating Station / Jeff Drowley ; Kevin Ramsden
PVP2002-1139 - CHF for Uniformly Heated Vertical Tube Under High Pressure Conditions / W. Jaewoo Shim ; Joon-Yong Park
PVP2002-1140 - Numerical Prediction of Flow in a Nuclear Fuel Bundle With Various Turbulence Models / Wang Kee In ; Dong Seok Oh ; Tae Hyun Chun
Sloshing and Fluid-Structure Interaction: Introduction / D. C. Ma ; D. Brochard ; T. Chiba
PVP2002-1141 - Analytical Evaluation of a Seismic Capability of Actual LNG Tank Under Severe Seismic Excitation / Hideyuki Tazuke ; Satoru Yamaguchi ; Hiroshi Akiyama ; Tomoki Sakurai ; Toshio Chiba
PVP2002-1142 - Modelling and Simulation of the Three-Dimensional Hydrodynamic Problem / Matthieu Tourbier ; Bernard Peseux ; Bundi Donguy ; Laurent Gornet
PVP2002-1143 - An Experimental Study of EFB Behavior of Large Model Tank
PVP2002-1144 - Stochastic Stability of Some Hamiltonian Systems / F. Jedrzejewski
PVP2002-1145 - An Experimental Study of Slip Behavior of Large Scale Model Tank
Structures Under Extreme Loading Conditions: Introduction / S. E. Jones ; Howard S. Levine ; David M. Jerome
PVP2002-1146 - Chimney Walls Behavior When Submitted to an Internal Explosion / B. Autrusson ; G. Milcent
PVP2002-1147 - Impact of Aircraft Engines Into Reinforced Concrete Walls / Darrell Lawver ; Darren Tennant ; John Mould, Jr. ; Howard Levine
PVP2002-1148 - Analysis of Dynamic Loading of a Simple Structure to a Blast Wave / Vanessa Berg ; Jerome H. Stofleth ; Dale S. Preece ; Venner Saul
PVP2002-1149 - An Estimate for Mass Loss From High Velocity Steel Penetrators / J. C. Foster, Jr. ; O. A. Toness ; R. J. DeAngelis ; William K. Rule
PVP2002-1150 - Numerical Modeling of Fragmentation Characteristics of Explosive Fragmentation Munitions / Vladimir M. Gold
PVP2002-1151 - Design of Conical Shaped Charges for Prompt Initiation of TNT Chemical Munition Bursters / David L. Cole ; Paul W. Cooper
PVP2002-1152 - Modeling of Munitions Fragmentation and Fragment Interaction With Containment Vessels and Shielding Systems / W. Venner Saul
PVP2002-1153 - Penetration With High-Speed Friction / Robert N. Davis ; Mary L. Hughes ; Odin A. Toness
PVP2002-1154 - Single Chain Stochastic Polymer Modeling at High Strain Rates / Eric N. Harstad ; Francis H. Harlow ; Howard L. Schreyer
PVP2002-1155 - Penetration of a Rate Sensitive Geological Target by the Compaction Ring Theory / Martin R. Gilmore ; Joseph C. Foster, Jr.
PVP2002-1156 - Effect of Compressive Stress on Longitudinal Wave Speed in Cementitious Material / C. Allen Ross ; Voncile L. Ashley
Author Index
Current Thermal-Hydraulic Problems In Vessels, Piping, and Components: Introduction / Fred Moody ; Jong Chull Jo
PVP2002-1124 - Internal Damage in a High Pressure Process System by Thermal Hydraulic Forces: A Case History / Sam Brown ; Ian LeMay
PVP2002-1125 - Air Clearing Oscillation Produced by APR 1400 Prototype Sparger / Seok Cho ; Choon-Kyung Park ; Hwan-Yeol Kim ; Se-Young Chun ; Chul-Hwa Song ; Won-Pil Baek
51.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Frederick W. Brust
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vii, 202 p. ; 28 cm
シリーズ名: PVP ; vol. 434
所蔵情報: loading…
目次情報: 続きを見る
Residual Stress, Fracture, and Fatigue of Welded Structures: Introduction / Elisabeth Keim ; Pingsha Dong ; Frederick W. Brust
PVP2002-1099 - Fracture Behaviour of Mis-Matched Dissimilar Welds: Experimental Results / Gregoire Martin ; Patrick Hornet ; Mustafa Kocak ; Afshin K. Motarjemi
PVP2002-1100 - Fracture Behaviour of Mis-Matched Dissimilar Welds: Numerical Simulation Using Local Approach / Yazid Madi ; Jacques Besson
PVP2002-1101 - Fracture Assessment of a Clad Steel Using the SINTAP Defect Assessment Procedure / A. K. Motarjemi ; M. Kocak
PVP2002-1102 - Evaluation of Microstructure and Residual Stress on Bi-Material Welded Part / Jong-Sung Kim ; Seung-Gun Lee ; Tae-Eun Jin
PVP2002-1103 - Analysis of Residual Stresses and Assessment of Postulated Cracks in a Core Shroud Weld / Igor Varfolomeyev ; Dieter Siegele ; Dieter Beukelmann
PVP2002-1104 - Application of 3D Finite Element Modelling to Repair Weld Simulation in Industrial Applications / George Vinas ; Tamba Dauda ; Nicola Moyes ; Alan Laird
PVP2002-1105 - Lump-Pass Welding Simulation Technology Development for Shipbuilding Applications / Y. P. Yang ; F. W. Brust ; J. C. Kennedy, Jr.
PVP2002-1106 - Temperature and Residual Stress Fields in an Austenitic Circumferential Pipe Weld / Ruthard Bonn ; Klaus Metzner ; H. Kockelmann ; E. Roos ; L. Stumpfrock
PVP2002-1107 - Mathematical Expression for the Prediction of Penetration in V-Groove Joints for Aluminum 6063-T5 / Maria Carolina Payares ; Patricia Munoz-Escalona ; Minerva Dorta Almenara
PVP2002-1108 - Measurement of Residual Stresses in Steel Nozzle Intersections Containing Repair Welds / A. Thomas ; R. Ehrlich ; E. Kingston ; D. J. Smith
PVP2002-1109 - Effect of Weld Induced Residual Stresses on Pipe Crack Opening Areas and Implications on Leak-Before-Break Considerations / Lee Fredette
PVP2002-1110 - Three-Dimensional Analysis of In-Process Distortion Control in Fillet Welded Joints by Additional Cooling / Masahito Mochizuki ; Nobuki Takahashi ; Masao Toyoda
PVP2002-1111 - Consistent Treatment of Weld Residual Stresses in Fracture Assessment / P. Dong ; J. K. Hong
PVP2002-1112 - Effect of Small Amount of Bismuth on Corrosion Resistibility of Austenitic Stainless Steel Weld Metals / Yasuhiro Hara ; Keisuke Shiga ; Nobuo Nakazawa
PVP2002-1113 - Predicting How Crack Tip Residual Stresses Influence Brittle Fracture / Saeid Hadidimoud ; Ali Mirzaee-Sisan ; Chris E. Truman ; David J. Smith
PVP2002-1114 - Influence of the Cutting Parameters on the Cutting Forces of Carbon Steels / Zulay Cassier ; Patricia Munoz-Escanola ; Roldan Sanchez
PVP2002-1115 - Generation Behavior of Thermal and Residual Stresses Due to Phase Transformation During Welding Heat Cycles / Shogo Matsushima ; Zhiliang Zhang ; Oyvind Gundersen
Constraint Effects on Fracture and Fracture of Welds: Introduction / Poh-Sang Lam ; Yong-Yi Wang
PVP2002-1116 - Determination of Constraint-Modified J-R Curves for Carbon Steel Storage Tanks / P.-S. Lam ; Y. J. Chao ; X.-K. Zhu ; Y. Kim ; R. L. Sindelar
PVP2002-1117 - Experimental Investigation of Constraint Effects on Creep Crack Growth / Adam D. Bettinson ; Noel P. O'Dowd ; Kamran M. Nikbin ; George A. Webster
PVP2002-1118 - Investigating the Constraint Effect in a Particulate Composite Material / C. T. Liu
PVP2002-1119 - Fracture Toughness Properties of Savannah River Site Storage Tank ASTM A285 Low Carbon Steel / K. H. Subramanian ; A. J. Duncan
PVP2002-1120 - Creep and Creep-Fatigue Strength Property of a Long-Term Used Boiler Weldment Parts of 2.25Cr-1Mo Steel / Takashi Ogata
PVP2002-1121 - The Effect of Residual Stresses on the Fracture Resistance of Ductile Steels / Yuebao Lei
PVP2002-1122 - The Effects of Intercritical Heat Treatment of the SA508 Grade 3 Class 1 Steel Before Welding on the Mechanical Properties in its Welded Joint / Jeong-Tae Kim ; Byung-II Yang ; Hee-Kyung Kwon
PVP2002-1123 - Effect of Plastic Constraint and Strain Rate on Characteristics of Strength and Fracture in Undermatched Joints / Gyu-Baek An
Author Index
Residual Stress, Fracture, and Fatigue of Welded Structures: Introduction / Elisabeth Keim ; Pingsha Dong ; Frederick W. Brust
PVP2002-1099 - Fracture Behaviour of Mis-Matched Dissimilar Welds: Experimental Results / Gregoire Martin ; Patrick Hornet ; Mustafa Kocak ; Afshin K. Motarjemi
PVP2002-1100 - Fracture Behaviour of Mis-Matched Dissimilar Welds: Numerical Simulation Using Local Approach / Yazid Madi ; Jacques Besson
52.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, K.H. Hsu
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 205 p. ; 28 cm
シリーズ名: PVP ; vol. 433
所蔵情報: loading…
目次情報: 続きを見る
PVP2002-1076 - Advanced Gasket Testing Methodology: The New Situation in the European Standardization / R. Hahn ; H. Kockelmann ; H. Zerres ; Y. Guerout
PVP2002-1077 - Evolution of a High Temperature Sealing Material Technology / John Hoyes
PVP2002-1078 - Determination of Gasket Stress Levels During Thermal Transients / Warren Brown ; Michel Derenne ; Abdel-Hakim Bouzid
PVP2002-1079 - Simplified Sealing Test Procedure of Gaskets Based on Compressive Strain / Takashi Kobayashi ; Takahito Nishida ; Yuki Yamanaka
PVP2002-1080 - On the Effect of Temperature on Tightening Characteristics of Gaskets / Jaroslav Bartonicek ; Manfred Schaaf ; Friedrich Schoeckle
PVP2002-1081 - The Suitability of Various Gasket Types for Heat Exchanger Service
PVP2002-1082 - A Simplified Modeling of Gasket Stress-Strain Curve for FEM Analysis in Bolted Flange Joint Design / Satoshi Nagata ; Yasumasa Shoji ; Toshiyuki Sawa
PVP2002-1083 - An Experimental Investigation on Frictional Properties of Bolted Joints / Yanyao Jiang ; Ming Zhang ; Tae-Won Park ; Chu-Hwa Lee
PVP2002-1084 - Simulation of the Pressure Equipment Behavior Under Thermal Loading Sealing Application / Laurent Scliffet ; Dimitri Toumbas ; Guillaume Henry ; Hildegard Zerres ; Yann Guerout
PVP2002-1085 - Dynamic Characteristics of Structures With Bolted Joint / Shigeru Aoki
PVP2002-1086 - FEM Stress Analysis and Sealing Performance in Pipe Flange Connections With Gaskets Subjected to Internal Pressure and External Bending Moment / Mitsuhiro Matsumoto
PVP2002-1087 - Design of Compact Flange Joints / Finn Kirkemo
PVP2002-1088 - Compact Flanged Connections for High Temperature Applications / Sjur Lassesen ; Frank Woll
PVP2002-1089 - Stress Analysis and the Sealing Performance Evaluation of Pipe Flange Connection With Spiral Wound Gaskets Under Internal Pressure / Naofumi Ogata
PVP2002-1090 - Mechanical Analysis of Glass Reinforced Plastics Bolt Flanged Connection With Elastomeric Seals / Hubert Mallard ; Charlotte Landry ; Yves Birembaut
PVP2002-1091 - Finite Element Simulation of the Disassembly Process of Pipe Flange Connections / Toshimichi Fukuoka ; Tomohiro Takaki
PVP2002-1092 - Systematical FE Analysis of Bolt Assembly Process of Pipe Flange Connections
PVP2002-1093 - The Effect of Steady State Thermal Loading on the Deflections of a Flanged Joint With a Cover Plate / Akli Nechache
PVP2002-1094 - Bolt Preload Control for Bolted Flange Joint / Hirokazu Tsuji ; Makoto Nakano
PVP2002-1095 - Three-Dimensional Finite Element Analysis of Pipe Flange Connections: The Case of Using Compressed Asbestos Sheet Gasket
PVP2002-1096 - Requirements for Numerical Flange Calculations According to the German Nuclear Code / Robert Kauer
PVP2002-1097 - NORSOK L-005: Compact Flanged Connections (CFC)--The New Flange Standard / Sjur Lassessen ; Tor Eriksen ; Finn Teller
PVP2002-1098 - Comparison of Leak Rates Predicted by ROTT Constants With Experimental Data From a 16" and 24" Pressure Vessel / George D. Bibel
Author Index
PVP2002-1076 - Advanced Gasket Testing Methodology: The New Situation in the European Standardization / R. Hahn ; H. Kockelmann ; H. Zerres ; Y. Guerout
PVP2002-1077 - Evolution of a High Temperature Sealing Material Technology / John Hoyes
PVP2002-1078 - Determination of Gasket Stress Levels During Thermal Transients / Warren Brown ; Michel Derenne ; Abdel-Hakim Bouzid
53.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Dominique Moinereau
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  2 v. ; 28 cm
シリーズ名: PVP ; vol. 443
所蔵情報: loading…
目次情報: 続きを見る
Fatigue: Design and Analysis
PVP2002-1324 - Fatigue Crack Growth in Plate-Like Structures Due to Thermal Striping / Som Chattopadhyay
PVP2002-1325 - Reduced Life Cycles Costs and Improved Analysis Accuracy Utilizing WESTEMS Integrated Modeling Methods / E. Lyles Cranford III ; Mark A. Gray ; Rashed Kabir
PVP2002-1326 - Feasibility Study of a Spectral Density Modeling of Thermal Fluctuations in Mixing Tees / C. Vindeirinho
PVP2002-1327 - Stress Response Functions to Multi-Dimensional Spatial Fluctuations of Fluid Temperature / Naoto Kasahara ; Hideki Takasho
PVP2002-1328 - Evaluation of the Risk of Damages in Mixing Zones: EDF R&D Programme / J. M. Stephan ; F. Curtit ; S. Taheri ; M. Akamatsu ; C. Peniguel
PVP2002-1329 - Detailed Assessment of Fatigue Life: A Critical Review / E. Roos ; K.-H. Herter ; F. Otremba
PVP2002-1330 - A Contribution to Proof the Component Integrity Taking Into Account the Corrosion-Assisted Crack Growth / Eberhard Roos ; Frank Otremba ; Frank Huttner
Fracture Mechanics: Global and Local Approaches
PVP2002-1331 - RPV Structural Integrity Assessment During a PTS Event: Application of an Extended Beremin Model Consistent With WPS Test Results / R. Masson ; L. Nicolas ; D. Moinereau
PVP2002-1332 - Fracture Assessment Procedure for Steels Structures Subjected to Large Cyclic and Dynamic Strain Based on WES TR 2808 / Fumiyoshi Minami ; Masao Toyoda ; Takahiro Kubo ; Hiroshi Shimanuki ; Noboru Konda ; Satoshi Igi
PVP2002-1333 - Numerical Modeling of Fracture Toughness in RPV Steel Containing Segregated Zones / Claire Naudin ; Andre Pineau ; Jean Michel Frund
PVP2002-1334 - J Evaluation by Analytical Method for Cracked Elbows Under Mechanical Loading / Marie-Helene LaCire ; Stephane Marie ; Stephane Chapuliot
PVP2002-1335 - Influence Coefficients to Calculate Stress Intensity Factors for an Elliptical Crack in a Plate / Patrick Le Delliou ; Bruno Barthelet
PVP2002-1336 - Stress Intensity Factor of a Circumferential Crack in a Thick-Walled Cylinder Under Thermal Striping / Toshiyuki Meshii ; Katsuhiko Watanabe
PVP2002-1337 - Analytical Method for the Calculation of J Parameter on Cracked Pipes Under Thermal Loading and Mechanical Plus Thermal Loading / S. Chapuliot ; M. Nedelec
PVP2002-1339 - Remaining Lifetime Assessment of Pipelines With Multiple Cracks Induced by Stress Corrosion Cracking / Margarita G. Malyukova ; Sviatoslav A. Timashev
Facture Mechanics and Materials
PVP2002-1340 - Application of Master Curve Approach to WWER-1000 RPV Materials / Milan Brumovsky ; Antonio Ballesteros
PVP2002-1341 - An Indentation Theory Based on FEA Solutions for Material Property Evaluation / Hyungyil Lee ; Jin Haeng Lee
PVP2002-1342 - Ductile Fracture of Ferritic Steels: Correlation of K[subscript llc]/K[subscript lc] Ratio and Strain Hardening Curve / Jiri Novak
PVP2002-1343 - The Fluence Prediction of Reactor Pressure Vessel Materials Due to Neutron Irradiation by Ultrasonic Characteristic Analysis / Sam Lai Lee ; Byoung Chul Kim ; Kee Ok Chang
Author Index
Probabilistic Damage Evaluation
PVP2002-1344 - Reliability Analysis of FRP Laminated Plates With Initial Imperfection / Jinqiao Chen ; Xiangyang Wang ; Cheng Luo
PVP2002-1345 - Probabilistic Fracture Mechanics Analysis of Nuclear Piping Considering an Embedded Crack / Hideo Machida ; Shinobu Yoshimura
PVP2002-1346 - The Application of Reliability-Based Design Factors in Stress Corrosion Cracking Evaluations / Edward Friedman
Fracture Mechanics: Application to Components
PVP2002-1347 - Benchmark Computations on a Typical Transition Weld of a PWR in Operation / Steve Bate ; Surender Bhandari
PVP2002-1348 - The Limit Pressure for a Cracked Branch Junction and Comparison With a Cracked Plain Cylinder / K. S. Lee ; D. N. Moreton ; P. J. Bouchard ; D. G. Moffat
PVP2002-1349 - Justification of the Use of Liquid Nitrogen To Make Ice-Plugs in Carbon-Manganese Steel Pipes for Maintenance Purposes in Nuclear Plants / Clarisse Messelier-Gouze ; Christian Brezillon ; Andre Tubiana ; Gilles Rousseau
PVP2002-1350 - Fatigue Fracture Behavior of Steel Pipes With a Pre-Crack / Jae-Kyoo Lim ; Lichun Bian
PVP2002-1351 - French RPV Assessment - Contribution of Expertises in Mechanical Analyses / G. Bezdikian ; Y. Rouillon ; J. Bourgoin
PVP2002-1352 - Constraint Based Assessment of Postulated Nozzle Corner Cracks / Dieter Siegele ; Igor Varfolomeyev ; Gerhard Nagel
PVP2002-1353 - Assessment of the French Reactor Pressure Vessel Integrity in PTS Conditions. Thermalhydraulic and Thermomechanical Studies of the Small Break LOCA in a Three Loop PWR Plant / A. Martin ; S. Bugat ; F. Ternon Morin ; S. Bellet
Fracture Mechanics: Development of New Methods
PVP2002-1355 - Load History Effect on Plastic Collapse in a Single-Edge Notched SUS316 Subjected to a Combined Tension and Bending / Saturo Izawa ; Masaaki Matsubara ; Kikuo Nezu ; Kenji Sakamoto
PVP2002-1356 - Simplified Modeling of a PWR Reactor Pressure Vessel Lower Head Failure in the Case of a Severe Accident / V. Koundy ; M. Durin ; A. Combescure
PVP2002-1357 - Predicting Mixed Mode Crack Initiation Angles in Anisotropic Materials Using the Shape of the Crack Tip Core Region / Shafique M. A. Khan ; Marwan K. Khraisheh
PVP2002-1358 - The Behaviour of a Process Zone at the Root of a Deep Sharp Flaw / E. Smith
PVP2002-1359 - Fracture Mechanics Evaluation Considering Thermal Aging Embrittlement / Yoon-Suk Chang ; Tae-Eun Jin
Re-Evaluation of Pressurized Thermal Shock Assessment
PVP2002-1360 - The Impact of an Improved Flaw Model on a Pressurized Thermal Shock Evaluation / T. L. Dickson ; F. A. Simonen
PVP2002-1361 - Distributions of Fabrication Flaws in Reactor Pressure Vessels for Structural Integrity Evaluations / G. J. Schuster ; S. R. Doctor
PVP2002-1362 - Alternative RT[subscript NDT] for Linde 80 Weld Materials / K. K. Yoon ; J. B. Hall
Selected Topics in Composites and Fatigue: Introduction / Walied A. Moussa
PVP2002-1363 - On the Design and Analysis of Fiber Reinforced Polymeric Composite Pipes and Vessels / Fernand Ellyin
PVP2002-1364 - On the Interaction of Non-Coplanar Embedded Crack With Surface Crack in 3D Using FE and Multi-Level Sub-Structuring
PVP2002-1365 - Thermal Residual Stresses Induced During Manufacturing Process of Fiber Reinforced Polymeric Composites / Zihui Xia ; Yunfa Zhang
PVP2002-1366 - Influence of Lamination of Composite Materials on the Vibration Characteristics of Laminated Circular Cylindrical Shells / Tetsuya Narisawa
Fatigue: Design and Analysis
PVP2002-1324 - Fatigue Crack Growth in Plate-Like Structures Due to Thermal Striping / Som Chattopadhyay
PVP2002-1325 - Reduced Life Cycles Costs and Improved Analysis Accuracy Utilizing WESTEMS Integrated Modeling Methods / E. Lyles Cranford III ; Mark A. Gray ; Rashed Kabir
54.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, James F. McCabe
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 174 p. ; 28 cm
シリーズ名: PVP ; vol. 442
所蔵情報: loading…
目次情報: 続きを見る
Fitness for Service, Life Extension, Remediation and Repair: Introduction / William J. Koves
PVP2002-1305 - Use of Structural Reliability Analysis for Uprating Above Ground Installations / A. Francis ; C. S. Jandu ; M. A. McCallum
PVP2002-1306 - Pro-Active Fitness for Service of 19 Meter Diameter NGL Surge Sphere / Michael P. Walsh
PVP2002-1307 - Fitness-for-Purpose Assessment of Encirclement Split-Tees / S. Wheat ; D. N. Bramley ; J. H. Liu
PVP2002-1308 - Steam Piping Fitness for Service Evaluation / Robert S. Vecchio ; Sri K. Sam Sinha
PVP2002-1309 - Hydrogen Embrittlement Testing of 2.25 Cr-1Mo Steel Using Large Thick Specimen / Yoru Wada ; Tatsuo Hasegawa ; Hirokazu Inoue
PVP2002-1310 - Flaw Growth Prediction and Fitness for Service Assessment of a PWR Nuclear Plant Steam Generator U-Tube
PVP2002-1311 - Simulation of Degraded Repair Weld and Serviceability Assessment of Petroleum Pressure Vessel / Rinzo Kayano
PVP2002-1312 - Creep Constitutive Equations for 1CrMoV Bolt Material / Fred V. Ellis ; Robert L. Zielke
PVP2002-1313 - IGSCC Failure of Refractalloy 26 Turbine Bolts / Sebastian Tordonato
PVP2002-1314 - Development of FFS Handbook for Refinery and Petrochemical Industries / Yoshiro Ideguchi ; Tsutomu Kikuchi ; Koichi Ikeda ; Tomohiro Watanabe ; Takayasu Tahara ; Ted L. Anderson
PVP2002-1315 - The Use of Fitness for Service Assessment Procedures to Establish Allowable Flaw Sizes in Steel Cylinders / John H. Smith ; Mahendra D. Rana
PVP2002-1316 - Probabilistic Integrity Assessment of Axial Flaw in CANDU Pressure Tube Due to the Diameter and Thickness Variation / Sang-Log Kwak ; Joon-Seong Lee ; Young-Jin Kim ; Youn-Won Park
PVP2002-1317 - Case History of Solidification Cracks in 2-1/4 Cr 1 Mo Low Carbon Welds: Cholla Unit 2 / Marvin J. Cohn ; Steve R. Paterson ; Dan Nass
PVP2002-1318 - Assessment of Local Wall Thinned Pipeline Under Combined Bending and Pressure / D. J. Shim ; J. B. Choi ; Y. J. Kim ; J. W. Kim ; C. Y. Park
PVP2002-1319 - Investigation of Radiant Superheater Crossover Pipe Weld Cracking at Big Cajun II Station / James P. King ; Robert D. Hendrix
Inelastic and Non-Linear Analysis: Introduction / Maher Y. A. Younan
PVP2002-1320 - Limit Analysis of a Pipe Section With Non-Uniform Wall Thinning / Keshab K. Dwivedy
PVP2002-1321 - Limit Analysis for Anisotropic Solids Using Variational Principle and Repeated Elastic Finite Element Analyses / L. Pan ; R. Seshadri
PVP2002-1322 - Nonlinear Analysis of Anchored Tanks Subject to Equivalent Seismic Loading / D. Redekop ; P. Mirfakhraei ; T. Muhammad
PVP2002-1323 - 3D Finite Element Modeling of the Welding Process Using Element Birth and Element Movement Techniques / Ihab F. Z. Fanous ; Abdalla S. Wifi
Author Index
Fitness for Service, Life Extension, Remediation and Repair: Introduction / William J. Koves
PVP2002-1305 - Use of Structural Reliability Analysis for Uprating Above Ground Installations / A. Francis ; C. S. Jandu ; M. A. McCallum
PVP2002-1306 - Pro-Active Fitness for Service of 19 Meter Diameter NGL Surge Sphere / Michael P. Walsh
55.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Navid Badie
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 225 p. ; 28 cm
シリーズ名: PVP ; vol. 441
所蔵情報: loading…
目次情報: 続きを見る
Nonlinear Finite Element and Discrete Approximation Techniques: Developments and Applications: Introduction / Richard G. Sauve ; John Martin ; Patricia Munoz ; Navid Badie
PVP2002-1283 - Contact Simulation in Finite Deformation - Algorithm and Modelling Issues / R. G. Sauve ; G. Morandin ; S. Khajehpour
PVP2002-1284 - The Meshless Dynamic Relaxation Techniques for Simulating Atomic Structures of Materials / Li Pan ; Don R. Metzger ; Marek Niewczas
PVP2002-1285 - Subcycled Hourglass Control for Explicit Time Integration of Dynamic Relaxation Equations / D. R. Metzger ; S. Gao
PVP2002-1286 - Extended GDQ and Related Discrete Element Analysis Methods for Transient Analyses of Continuum Mechanics Problems / Chang-New Chen
PVP2002-1287 - Inclusion of Local Shell Behavior of Tubes into a Two-Dimensional Beam Approximation of Deformation in Nuclear Fuel Channels / N. Badie
PVP2002-1288 - Finite Element Analysis of Complex Corrosion Defects / Duane S. Cronin
PVP2002-1289 - A Finite Element Analysis of the Residual Stresses Incurred during Bending of Pipes / C. S. Scott ; M. J. Kozluk
PVP2002-1290 - Dynamic Response of Timoshenko Beam Structures Solved by DQEM Using EDQ
PVP2002-1291 - Threshold and Variable Amplitude Crack Growth Behavior in 350WT Steel / P. A. Rushton ; F. Taheri ; D. C. Stredulinsky
PVP2002-1292 - Piping System Structural Integrity Simulation for Post LOCA Water Hammer Loads / B. W. Manning ; T. Stevens ; R. Richards ; S. Mantro ; J. Czajkowski
PVP2002-1293 - Finite Element Formulation for the Analysis of the Erosive Character of Oil-Based Drilling Fluids During Well Drilling Processes / Jack Jenkins ; Oswaldo Nunez
PVP2002-1294 - Roller Burnishing: A Cold Working Tool to Reduce Weld Induced Residual Stress
PVP2002-1295 - Numerical Study of Mass Dispersion in Laminar and Turbulent Flows Through a Pipeline / Horacio Antonio Florez Guzman
PVP2002-1296 - Out-of-Plane Deflections of Nonprismatic Curved Beam Structures Solved by the Differential Quadrature Element Method
Efficient Computational Models for Limit Load Analysis of Pressure Vessel Components: Introduction / David P. Jones ; Wolf Reinhardt
PVP2002-1297 - Computation of Ratchet Limits for Structures Subjected to Cyclic Loading and Temperature / A. R. S. Ponter ; H. Chen ; M. Habibullah
PVP2002-1298 - Application of a Sixth Order Generalized Stress Function for Determining Limit Loads for Plates with Triangular Penetration Patterns / J. L. Gordon ; D. P. Jones
PVP2002-1299 - Equivalent Solid Based Fatigue Analysis of Perforated Plates with Triangular Perforation Pattern
PVP2002-1300 - Some Achievements of the European Project LISA for FEM Based Limit and Shakedown Analysis / M. Staat
PVP2002-1301 - Limit Analysis of Shells With Random Pattern of Spread Pits / Janek S. Porowski ; David A. Osage ; Jeremy Janelle
PVP2002-1302 - Comparison of Limit Load Solutions with Results of Collapse Tests of Perforated Plates With a Triangular Penetration Pattern
PVP2002-1303 - Effect of Plane Strain, Plane Stress and Bending on Equivalent Solid Collapse Predictions for Perforated Plates
PVP2002-1304 - Can Repeated Elastic Analyses Always Provide Exact Limit Loads? / Prasad Mangalaramanan
Author Index
Nonlinear Finite Element and Discrete Approximation Techniques: Developments and Applications: Introduction / Richard G. Sauve ; John Martin ; Patricia Munoz ; Navid Badie
PVP2002-1283 - Contact Simulation in Finite Deformation - Algorithm and Modelling Issues / R. G. Sauve ; G. Morandin ; S. Khajehpour
PVP2002-1284 - The Meshless Dynamic Relaxation Techniques for Simulating Atomic Structures of Materials / Li Pan ; Don R. Metzger ; Marek Niewczas
56.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Artin A. Dermenjian
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vii, 227 p. ; 28 cm
シリーズ名: PVP ; vol. 440
所蔵情報: loading…
目次情報: 続きを見る
Design and Analysis of Piping and Piping Components--I: Introduction / Artin Dermenjian
PVP2002-1257 - Assessment of Local Decreases in Wall Thickness at the Connection Straight-Pipe to Bend / Robert Kauer ; Wieland Holzer
PVP2002-1258 - An Experimental Study on the Evaluation of Failure Behavior of Pipe With Local Wall Thinning / Jin Weon Kim ; Chi Yong Park
PVP2002-1259 - Thermal Mixing Points: A Thermomechanical Stress FEA Procedure / Trevor G. Seipp ; Christopher Reichert
PVP2002-1260 - Finite Element Analysis for Local Creep of a Tube Coolant Piping System in Light Water Reactor due to Local Heating Under Severe Accident Condition / Seiya Hagihara ; Noriyuki Miyazaki
PVP2002-1261 - Stress Indices for Circumferential Fillet Welded and Socket Welded Joints / Edward A. Wais ; E. C. Rodabaugh ; R. Carter
Design and Analysis of Piping and Piping Components--II: Introduction / Ravi Baliga ; Walied A. Moussa
PVP2002-1262 - Temperature Attenuation Along Pipe Support Stanchions / Chakrapani Basavaraju ; Ronald C. Fox
PVP2002-1263 - Structural Evaluation of a Piping System Subject to Thermal Stratification / Som Chattopadhyay
PVP2002-1264 - Seismic Design of Geothermal Pipeline Supports / Fjola Jonsdottir ; Gunnlaugur O. Agustsson ; Magnus T. Jonsson
PVP2002-1265 - Dynamic Pipe Stresses During Water Hammer: I--A Finite Element Approach / Robert A. Leishear ; Curtis A. Rhodes ; Edward F. Young ; Elisabeth M. Alford
PVP2002-1266 - Investigation of Torsional Stress Intensification Factors and Stress Indices for Girth Butt Welds in Straight Pipe
Design and Analysis of Piping and Piping Components--III: Introduction / James F. McCabe
PVP2002-1267 - Application of Code Case N-597 for Local Thinning Assessment for Class 1 Piping / San Iyer ; Rajnish Kumar
PVP2002-1268 - Fatigue Life Prediction for Short Dents in Petroleum Pipelines / Adam J. Rinehart ; Peter B. Keating
PVP2002-1269 - Dynamic Pipe Stresses During Water Hammer: II--A Vibration Analysis
PVP2002-1270 - A Dynamic Investigation of Piping Systems With a Bolted Flange / William H. Semke ; George D. Bibel ; Sukhvarsh Jerath ; Sanjay B. Gurav ; Adam L. Webster
Design and Analysis of Piping and Piping Components--IV: Introduction / Dennis K. Williams
PVP2002-1271 - Modeling Underground Pipe With Pipe Stress Analysis Program / Robert A. Robleto
PVP2002-1272 - Investigation of Design Method for Piping Systems to Prevent the Acoustic Fatigue in Process Plants / Itsuro Hayashi ; Teruo Hioki ; Hiroshi Isobe
PVP2002-1273 - Dynamic Pipe Stresses During Water Hammer: III--Complex Stress Relationships
PVP2002-1274 - Simulation of GRP Pipe Materials and Installations Parameters Experimentally and Using FEA / A. Ibrahim ; R. El-Kousy ; I. El-Mahllwai ; N. Zaafarani
Design and Analysis of Pressure Vessels, Heat Exchangers, and Components--I: Introduction
PVP2002-1275 - Design of Ellipsoidal Heads Using Elastic-Plastic Finite Element Analysis / Donald J. Florizone
PVP2002-1276 - Thermal Shock Failure Analysis and Remediation Design of an Internal Catalyst Structure / John E. Camburn ; Kenneth L. Saunders
PVP2002-1277 - Vibration Modes of Spherical Shells and Containment Vessels / Thomas A. Duffey ; Christopher Romero
PVP2002-1278 - Convergence of the Axisymmetric Bessel Function Solution to the Pipe Strap Anchor Problem
Design and Analysis of Pressure Vessels, Heat Exchangers, and Components--II: Introduction
PVP2002-1279 - Stiffness Coefficients for Nozzles in API 650 Tanks / Manfred Lengsfeld ; Kanhaiya L. Bardia ; Jan Taagepera ; Kanajett Hathaitham ; Donald G. LaBounty ; Mark C. Lengsfeld
PVP2002-1280 - A Proposed Design Criterion for Vessel Lifting Lugs in Lieu of ASME B30.20
PVP2002-1281 - Residual Stress of Thin-Wall Pipe Subjected to Axisymmetric Plastic Expansion / Norimasa Chiba ; Yuji Ishida ; Nagahisa Ogasawara ; Hiroshi Ito ; Kunio Enomoto ; Hiroshi Kimoto
PVP2002-1282 - ASME B&PV Code Section VIII Pressure Vessel Design: A Comparison--Division 1 Versus Division 2 / Dwight V. Smith
Author Index
Design and Analysis of Piping and Piping Components--I: Introduction / Artin Dermenjian
PVP2002-1257 - Assessment of Local Decreases in Wall Thickness at the Connection Straight-Pipe to Bend / Robert Kauer ; Wieland Holzer
PVP2002-1258 - An Experimental Study on the Evaluation of Failure Behavior of Pipe With Local Wall Thinning / Jin Weon Kim ; Chi Yong Park
57.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M.D. Rana
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  x, 369 p. ; 28 cm
シリーズ名: PVP ; vol. 439
所蔵情報: loading…
目次情報: 続きを見る
Plastic Analysis in Pressure Vessel Design: Introduction / Arturs Kalnins
PVP2002-1215 - Evaluation of Thermal Stress Ratchet in Plastic FEA / Yukinori Yamamoto ; Norimichi Yamashita ; Masaaki Tanaka
PVP2002-1216 - Effects of Local Peak Stress Distribution on the Ratchet Limit / Nobuyoshi Yanagida
PVP2002-1217 - Verification of Alternative Criteria for Shakedown Evaluation Using Flat Head Vessel / Seiji Asada ; Asao Okamoto ; Isoharu Nishiguchi
PVP2002-1218 - Verification of Alternative Criteria for Shakedown Evaluation Using 2-dimensional and 3-dimensional Nozzle Models
PVP2002-1219 - The European Approach to Design by Analysis / Josef L. Zeman
PVP2002-1220 - Analytical and Numerical Evaluation of the Cyclic Yield Area Criteria for Shakedown Requirements / Mitsuru Aoki
PVP2002-1221 - Shakedown and Ratcheting Directives of ASME B&PV Code and Their Execution
PVP2002-1222 - Evaluation Criteria for Alternating Loads Based on Partial Inelastic Analyses / Yasuhiro Ohtake
PVP2002-1223 - Collapse Tests on Externally Pressurised Toroids / J. Blachut
PVP2002-1224 - A Simple Inelastic Constitutive Model for Evaluation of Stable Cyclic Stress Response Under Nonproportional Straining / Masao Sakane ; Takamoto Itoh ; Xu Chen
PVP2002-1225 - Creep Life Prediction For High Energy Piping Girth Welds Case History--Cholla, Unit 2 / Marvin J. Cohn ; Dan Nass
Environmental Fatigue Issues in B&PV Code: Introduction / David P. Jones
PVP2002-1226 - Results of High Stress Ratio and Low Stress Intensity on Fatigue Crack Growth Rates for 304 Stainless Steel in 288[degree]C Water / William M. Evans ; Gary L. Wire
PVP2002-1227 - The Modified Rate Approach Method to Evaluate Fatigue Life Under Synchronously Changing Temperature and Strain Rate in Elevated Temperature Water / Kazuya Tsutsumi ; Makoto Higuchi ; Kunihiro Iida ; Yutaka Yamamoto
PVP2002-1228 - A Proposal of Fatigue Life Correction Factor Fen for Austenitic Stainless Steels in LWR Water Environments / Akihiko Hirano ; Katsumi Sakaguchi
PVP2002-1229 - Development of a Fatigue Design Curve for Austenitic Stainless Steels in LWR Environments: A Review / Omesh K. Chopra
PVP2002-1230 - Mechanism of Fatigue Crack Initiation in Austenitic Stainless Steels in LWR Environments
PVP2002-1231 - Effects of Water Flow Rate on Fatigue Life of Ferritic and Austentic Steels in Simulated LWR Environment / Michiyoshi Yamamoto ; Tetsuo Shoji
PVP2002-1232 - Fatigue Crack Propagation from Notched Specimens of 304 SS in an Elevated Temperature Aqueous Environment / William J. Mills
PVP2002-1233 - CF/SCC Interaction on Structural Materials for LWR in High Temperature Water / Yasuyuki Katada ; Shigeo Ohashi
PVP2002-1234 - Fatigue of Piping and Vessel Welds: ASME's FSRF Rules Revisited / P. Dong ; J. K. Hong ; D. Osage ; M. Prager
PVP2002-1235 - Probabilistic Approach for Creep-Fatigue Evaluation in Liquid Metal Cooled Fast Reactor / Nobuchika Kawasaki ; Yasuharu Chuman ; Yoshihiko Tanaka ; Tai Asayama
PVP2002-1236 - Development of a Fatigue Strength Database for LWR Water Environment / Akio Sayano
PVP2002-1237 - Flow Accelerated Corrosion Behavior of Candu Feeder Piping Characterized by High Temperature Rotating Cylinder Electrode / Jun Hwan Kim ; In Sup Kim ; Han Sub Chung
New Developments in Pressure Vessels Codes: Introduction / Mahendra D. Rana
PVP2002-1238 - Japanese Code for Assessment Procedure for Crack-like Flaws in Pressure Equipment / Shinji Konosu ; Takayasu Tahara ; Hideo Kobayashi
PVP2002-1239 - New Common Design Rules for U-Tube Heat Exchangers in ASME, CODAP and UPV Codes / F. Osweiller
PVP2002-1240 - 101 Essential Elements in a Pressure Equipment Integrity Management Program for the Hydrocarbon Process Industry / John T. Reynolds
PVP2002-1241 - Development of System Based Code for Structural Integrity of FBRS / Masaki M. Morishita ; Koji Dozaki
Structural Integrity of Pressure Components: Introduction / Yogeshwar Hari ; Dilip Bhavnani
PVP2002-1242 - Finite Element Analysis and Design of a Horizontal Tank on Saddle Supports / Afewerki H. Birhane
PVP2002-1243 - Limit Load Analysis of API 620 Tank Roof-Shell Junction / Victor E. Bergsten
PVP2002-1244 - Identification and Resolution of Piping Analysis Activities for Extended Power Uprates at Nuclear Plants
New Developments in Section XI: Introduction / Warren Bamford
PVP2002-1245 - Technical Basis for the Incorporation of a Fatigue Crack Growth Threshold Limit Into Appendix A to Section XI / Edward Friedman ; Russell C. Cipolla ; Joseph M. Bloom
PVP2002-1246 - Comparison of Stress Intensity Factors of Two Flaws and a Combined Flaw Due to Combination Rules / Kunio Hasegawa ; Masaki Shiratori ; Toshiro Miyoshi ; Nagatoshi Seki
PVP2002-1247 - Making Sense of Section XI Visual Examination Requirements / N. Roger Bentley
What's New in Asme Section X and RTP-1: Introduction / Peter J. Conlisk
PVP2002-1248 - Scopes of RTP-1 and Section X, Classes I & II and Design Qualification
PVP2002-1249 - Design Qualification and Manufacturing of Section X Class I Vessels / Douglas Eisberg
PVP2002-1250 - Design Qualification and Manufacturing of RTP-1 Tanks and Vessels / Greg Hopkins
Probabilistic Safety Assessment Standards for Application to Nuclear Power Plants: Introduction / Raymond E. Schneider
PVP2002-1251 - The ASME PSA Standard and it's Role in Risk Informed Regulation
PVP2002-1252 - The Use of the ASME PRA Standard in Pressure Vessel and Piping Work / Richard A. Hill
Background on Recent Changes in Section III Rules for Seismic Piping Design: Introduction / Richard W. Barnes
PVP2002-1253 - Using Component Test Data to Assist in Establishing Code Criteria to Achieve the Desired Seismic Capacity Margin for Piping / Robert P. Kennedy
PVP2002-1254 - Simulation of Excessive Deformation of Piping Due to Seismic and Weight Loads / Tatsuya Fujiwaka ; Hiroe Kobayashi ; Yasuhide Asada ; Chikashi Shitara
PVP2002-1255 - A Parametric Study of the Seismic Margins of Piping Components / Wilfred D. Iwan ; Ching-Tung Huang
PVP2002-1256 - Background to Recent Revision of the Section III Seismic Piping Rules / John Minichiello ; Ernest B. Branch ; Timothy M. Adams
Author Index
Plastic Analysis in Pressure Vessel Design: Introduction / Arturs Kalnins
PVP2002-1215 - Evaluation of Thermal Stress Ratchet in Plastic FEA / Yukinori Yamamoto ; Norimichi Yamashita ; Masaaki Tanaka
PVP2002-1216 - Effects of Local Peak Stress Distribution on the Ratchet Limit / Nobuyoshi Yanagida
58.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, L.I. Ezekoye, T.H. Liu
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 147 p. ; 28 cm
シリーズ名: PVP ; vol. 447
所蔵情報: loading…
59.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Shigeru Itoh, M'Hamed Souli
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  2 v. ; 28 cm
シリーズ名: PVP ; v. 446
所蔵情報: loading…
目次情報: 続きを見る
Advances in Computer Codes: Introduction / Itoh Shigeru ; M'Hamed Souli ; Wing Cheng ; Michael Fischer ; Arne Holdo
PVP2002-1454 - Simultaneous Prediction of Solid Stress, Heat Transfer and Fluid Flow by a Single Algorithm (Keynote) / D. B. Spalding
PVP2002-1455 - Plume and Crosswind Interaction, Prediction and Validation / J. A. Green
PVP2002-1456 - Initial CFD Simulations of High Aspect Ratio Jets / Jan Profe-Bracht ; Sarah J. Wakes
PVP2002-1457 - Modeling of Flow Around a Circular Cylinder in Sub-Critical Flow Regime With the Use of Dynamic Grid Adaptation / Govert de With ; Arne E. Holdo ; Thomas A. Huld
PVP2002-1458 - The Prediction of Flow Patterns Below a Fixed Bed Media / Steve Platt ; Alan Cantwell
PVP2002-1459 - Solution Adaptive Grids Applied to Low Reynolds Number Flow
PVP2002-1460 - Investigating Flow Inside a Commercial Aircraft Cabin / Rajnish K. Calay ; Simon D. Harris
Advances in Fluid-Structure Interaction: Introduction
PVP2002-1461 - CFD-Tool for Thermal-Hydraulics Pressurised Thermal Shock Analysis: Qualification of the Code_Saturne / A. Martin ; S. Bellet
PVP2002-1462 - Fluid Structure Interaction in LS-DYNA: Industrial Applications / M'hamed Souli ; Lars Olovson ; Ian Do
PVP2002-1463 - A Beam Embedded Element for Numerical Modeling of Geo-Composites Structures / Machhour Sadek ; Isam Shahrour ; Hussein Mroueh
PVP2002-1464 - Design of Tunnels in Swelling Soils: Determination of Swelling Soil Properties / Timothee Windal
PVP2002-1465 - Deformation and Collision Process of Metal Plate on Explosive Welding Using Underwater Shock Wave / Hirofumi Iyama ; Masahiro Fujita ; K. Raghukandan ; Kazuyuki Hokamoto ; Shigeru Itoh
PVP2002-1466 - Fluid-Structure Interaction for Hydrodynamic Problems: Impact Between a Tank Bow Flare and a Submarine / N. Aquelet ; H. Lesourne ; M. Souli
PVP2002-1467 - Simulation of a CH-47 Water Crash Event / Jonathan W. Gabrys ; Joshua K. Schatz
PVP2002-1468 - ALE Multi-Material Formulation of High Explosive Detonation Using LS-DYNA3D / K. Mahmadi ; J. Gabrys
PVP2002-1469 - Fluid-Structure Interaction of Stirrers in Mixing Vessels: Part I--Development of the Mechanical Model / Klaus Strohmeier
PVP2002-1470 - Fluid-Structure Interaction of Stirrers in Mixing Vessels: Part II--Fully Coupled Simulation / Thomas Berger ; Bernhard Eckl
PVP2002-1471 - Integrity of a Curved Divider Plate in Steam Generators of Pressurized Water Reactors Due to Dynamic Pressure Loading Considering Fluid Structure Interaction / Konrad Schramm
PVP2002-1472 - Characteristics of the Flying Metal Plate System Using Overdriven Detonation / H. Morimoto ; Shiro N. Nagano ; Masahiko O. Otsuka ; Eiji Hida ; Kenji Kuroki ; Zhi-Yue Liu
PVP2002-1473 - An Overview of Vapor Cloud Explosions and Their Relationship to Equipment and Piping Configurations / Adrian J. Pierorazio
PVP2002-1474 - A Method for Producing Extra-High Dynamic Pressure Due to the Efficient Use of High Explosive / Katsumi Tanaka
PVP2002-1475 - On Stud of Free Metal Forming Using Underwater Shock Wave / Hirofumi lyama ; Shiro Nagano ; Ryo Matsumura ; Satoshi Muramoto
PVP2002-1476 - Flow Characteristics of a Shaft Driven Lift Engine / Chris Palmer
Advances in Piping Systems: Introduction
PVP2002-1477 - Optimisation of Loads in Piping Systems by Realistic Calculation Method Applying FSI and Dynamic Friction / Tilman Diesselhorst ; Ulrich Neumann
PVP2002-1478 - Metal Pipe Forming Using Underwater Shock Wave
PVP2002-1479 - Continuous Computation in Apparatus Engineering / Simon Pilhar ; Manfred Zirkel ; Sandor Vajna
PVP2002-1480 - CFD Simulation of Soil Flow Over Augers / Joel Davison ; Rajnish Calay ; Tim Sands ; Melvin England
Author Index
Advances in Computer Codes: Introduction / Itoh Shigeru ; M'Hamed Souli ; Wing Cheng ; Michael Fischer ; Arne Holdo
PVP2002-1454 - Simultaneous Prediction of Solid Stress, Heat Transfer and Fluid Flow by a Single Algorithm (Keynote) / D. B. Spalding
PVP2002-1455 - Plume and Crosswind Interaction, Prediction and Validation / J. A. Green
60.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, S.C. Lu
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  2 v. ; 28 cm
シリーズ名: PVP ; vol. 445
所蔵情報: loading…
目次情報: 続きを見る
Seismic Design Criteria, Design Code, and Failure Analysis of Piping Systems and High Pressure Gas Facilities / Vol.1:
PVP2002-1390 - Failure Behavior of Piping Systems With Wall Thinning Under Seismic Loading / Izumi Nakamura ; Akihito Otani ; Masaki Shiratori
PVP2002-1391 - Failure Analysis of Thinned Wall Elbows Under Excessive Seismic Loading / Yoji Ochi
PVP2002-1392 - Developments of Seismic Design Code for High Pressure Gas Facilities in Japan / Heki Shibata ; Kohei Suzuki ; Masatoshi Ikeda
PVP2002-1393 - A New Seismic Design Criteria of Piping Systems in High Pressure Gas Facilities / Makoto Inaba ; Nobuyuki Shimizu ; Testuya Watanabe
Large Scale Ongoing R&D Projects on Seismic Engineering
PVP2002-1394 - Study on 3-D Measurement Method for Structural Dynamic Displacement in Shake Table Tests Using Image Processing / Satoshi Fujita ; Osamu Furuya ; Yasushi Niitsu ; Tadashi Mikoshiba ; Hiroaki Yamazaki
PVP2002-1395 - Development of Advanced Mechanical System for 3-D Full-Scale Earthquake Testing Facility / Shintaro Watanabe ; Kazuhiko Maekawa ; Yasuyuki Tanaka ; Akesi Koike ; Yukiharu Yamasaki
PVP2002-1396 - Development of Numerical Dynamic Simulators for 3-D Full-Scale Earthquake Testing Facility (Phase-2) / Shinichiro Kajii ; Chiaki Yasuda ; Tosio Yamashita ; Yukihito Okuda ; Jun Hirai ; Nobuyuki Ogawa
PVP2002-1397 - Feasibility Study of Tank Failure Test with "E-Defense" / Shojiro Oka ; Kouichi Kajiwara ; Tomohiro Itoh
PVP2002-1398 - Experimental Method Using the Inertial Loading Equipment by the Large Scale Shaking Table / Satoshi Yamada ; Yuka Matsumoto ; Michio Yamaguchi ; Akira Wada ; Hiroshi Akiyama
PVP2002-1399 - Alternative Control Design Approach to Shaking Facilities for Re-Creating Seismic Motion / Eiji Sato ; Tomoyoshi Kakegawa ; Taku Suzuki ; Yasutaka Tagawa ; Shigemitsu Takai
PVP2002-1400 - New Development of Control Method of Shaking Table With Bi-Linear Structures / Yuichirou Shinohara
PVP2002-1401 - A Multi-Point Radio Displacement Measurement Method for Testing Quake-Proof Structure / Atsushi Okamura ; Wataru Yosizaki ; Hideki Nagai ; Atsushi Mogi ; Takashi Sekiguchi ; Hiroshi Kikuchi
PVP2002-1402 - Seismic Proving Test of Eroded Piping: Program and Preliminary Analysis of Eroded Piping Tests / Y. Namita ; K. Suzuki ; H. Abe ; I. Ichihashi ; M. Shiratori ; K. Iwata ; N. Kojima ; M. Ishiwata
PVP2002-1403 - Seismic Proving Test of Ultimate Piping Strength: Test Results on Piping Component and Simplified Piping System / Kenichi Suzuki ; T. Fujiwaka ; K. Tai
PVP2002-1404 - Seismic Proving Test of Heavy Component With Energy Absorbing Support: Proving Test Results / T. Iwatsubo ; M. Konno ; K. Kuroda ; H. Sumiya
PVP2002-1405 - A New Design Method for Piping Components Against Leakage and Damage Subjected to High Level Earthquake Load / Fumio Ando ; Toshiyuki Sawa
Seismic Evaluation of Systems, Structures, and Components
PVP2002-1406 - An Advanced Computational Method for Nonlinear Behavior of Piping Systems Subjected to Earthquake Load / Norihiko Mukaimachi
PVP2002-1407 - Dynamic Buckling Behavior of an Elastic Beam Subjected to Horizontal and Vertical Excitations Simultaneously / Katsuhisa Fujita ; Taisuke Nosaka
PVP2002-1408 - Vertical Response of Multi-Story Structures at the Instance of Maximum Horizontal Response / Tomoyo Taniguchi
PVP2002-1409 - Analytical Exploration of the Time History Analysis of Shock Response / Shuenn-Yih Chang
PVP2002-1529 - Probabilistic Site Identification Analysis Using NUPEC Recorded Free-Field Motions / J. Xu ; C. Costantino ; C. Hofmayer ; A. Murphy ; Y. Kitada
PVP2002-1410 - Simplified Calculation Method of Seismic Response Energy of Mechanical Systems / Shigeru Aoki
PVP2002-1411 - Seismic Evaluation of Existing Structures Supporting Loading-Arms in LNG Receiving Terminal / Masami Oshima ; Takashi Kase
PVP2002-1412 - Using Limit Analysis for Seismic Evaluation of Component Located in Nuclear Power Plants / Petr Zeman
PVP2002-1413 - Generation of Spectrum-Compatible Earthquake Motion Using Wavelet Transform / Arata Masuda ; Akira Sone
Seismic Structures Response and Interaction
PVP2002-1414 - Dynamic Stress Concentration of a Cylindrical Cavity Buried in an Elastic Half-Plane Subjected to a Standard Goodier-Bishop Stress Wave / C. S. Yeh ; T. J. Teng ; W. I. Liao ; W. S. Shyu
PVP2002-1415 - The Current Development of Seismic Design Code of Highway Bridges in Taiwan / C. H. Loh ; J. F. Chai
PVP2002-1416 - Experimental Study for a New Energy Dissipation Device: Multiple-Direction Damper / C. S. Tsai ; L. L. Chung ; T. C. Chiang ; B. J. Chen ; W. S. Chen
PVP2002-1417 - Seismic Analyses of Viscously-Damped Structures With an Unbounded Foundation / C. K. Cheng
PVP2002-1418 - Design Implications of Structural Irregularity / Wenshen Pong ; David Nesbet
PVP2002-1419 - Testing and Analysis of a New Lead-Extrusion Damper / W. S. Lai ; C. W. Chang ; M. C. Li
PVP2002-1420 - RADAS Device Technology for Retrofitting Damaged Structures in 921 Chi-Chi Earthquake / C. S. Chen ; W. S. Pong
High Level Seismic Response of Piping
PVP2002-1421 - About the Design Criteria for Piping Under Extreme Loading Conditions: Analysis and Design / L. Lazzeri
PVP2002-1422 - Piping Seismic Stress Limits: A Critical Review / Gerry C. Slagis
PVP2002-1423 - About the Design Criteria for Piping Under Extreme Loading Conditions: Appendix: Detailed Analyses
PVP2002-1424 - Approximate Analytic Method of Piping Systems With Elasto-Plastic Damper / Takeshi Watanabe
Author Index
Large Scale Ongoing R&D Projects on the Innovative Techniques for Seismic Isolation and Vibration Control of Structures / Vol.2:
PVP2002-1425 - A Large Scale Ongoing R&D Project on Three-Dimensional Seismic Isolation for FBR in JAPAN / A. Kato ; K. Umeki ; M. Morishita ; T. Fujita ; S. Midorikawa
PVP2002-1426 - Feasibility Tests on a Three-Dimensional Base Isolation System Incorporating Hydraulic Mechanism / Akihiro Kashiwazaki ; Takahiro Shimada ; Tatsuya Fujiwaka ; Katsuhiko Umeki
PVP2002-1427 - Development of Cable Reinforced 3-Dimensional Base Isolation Air Spring / Mitsuru Kageyama ; Tsutomu Iba ; Takahiro Somaki ; Hisako Hino
PVP2002-1428 - Development of Double Metal Bellows Air Pressure Spring With Lead Rubber Bearing Type 3-Dimensional Seismic Isolator / Kyotada Nakamura ; Seitaro Ogiso ; Michiaki Suzuki
PVP2002-1429 - Three Dimensional Seismic Isolation System Using Hydraulic Cylinder / Naoki Sawa ; Nobuhiro Kunitake
PVP2002-1430 - Development of Three Dimensional Seismic Isolation Device With Laminated Rubber Bearing and Rolling Seal Type Air Spring / Junji Suhara ; Tadashi Tamura ; Yasuo Okada
PVP2002-1431 - Application of Semi-Active Oil Damper System to Base Isolation Systems / Takashi Kawai ; Yasuo Tsuyuki ; Yutaka Inoue ; Osamu Takahashi ; Koji Oka
PVP2002-1432 - Design Method of Vertical Component Isolation System / S. Kitamura
International Symposium on Seismic, Shock, and Vibration Isolation
PVP2002-1433 - Overview: The 7th International Seminar on Seismic Isolation, Passive Energy Dissipation and Active Control of Vibrations of Structures, Assisi, Italy October 2-5, 2001 and Foundation of the Anti-Seismic Systems International Society (ASSISi) / Alessandro Martelli ; Giordano-Bruno Arato ; Massimo Forni ; Bruno Spadoni ; Howard H. Chung
PVP2002-1434 - Cost-Effectiveness Evaluation of Seismically Isolated Pool Structures Considering Fluid-Structure Interaction / Hyun-Moo Koh ; Kwan-Soon Park ; Junho Song
PVP2002-1435 - Advanced Tested Technology for Earthquakes and the Shapes of Memory: A Short Film and a Motion-Picture Developed in the Framework of the MUSICA Project / Enrico Bellani
PVP2002-1436 - Development of Innovative Anti-Seismic Systems for Civil and Industrial Structures: New Achievements of ENEA / M. Forni ; A. Martelli ; A. Poggianti ; B. Spadoni ; G. Venturi ; C. Bortolotti ; G. F. Cesari ; E. Sobrero ; A. Welponer ; G. De Canio ; R. Antonucci ; A. Marioni ; M. Battaini
PVP2002-1437 - Development and Application of Innovative Anti-Seismic Systems for the Protection of Cultural Heritage: New Achievements of ENEA / M. Indirli ; A. Dusi ; C. Alessandri ; A. Bertocchi ; R. Cami ; A. Baratta|cA. Procaccio ; B. Carpani ; P. Clemente ; M. Mucciarella
PVP2002-1438 - Study on Limits of Height-to-Width Ratio for Base Isolated Buildings Under Earthquake / Hong-Nan Li ; Xiang-Xiang Wu
PVP2002-1439 - Model of Transmission Tower-Pile-Soil Dynamic Interaction Under Earthquake: In-Plane / Shi-Yun Xiao ; Su-Yan Wang
PVP2002-1440 - Dynamic Characteristics of a Hydraulic Damper / Vishnu Verma ; A. K. Ghosh ; H. S. Kushwaha
PVP2002-1441 - Analyses of Seismic Isolation Systems in Kyrgyzstan / Tynymbek O. Ormonbekov ; Ulugbek T. Begaliev
PVP2002-1442 - A Study of an Arm Type Damper Consisting of Two Links, Two Joints and a Hinge / Taichi Matsuoka ; Kenichiro Omata ; Yasuhisa Okano
PVP2002-1443 - Development of Damper for Vibration Control of Detached Houses / Ikuo Shimoda ; Kazuaki Shiki ; Go Tanaka
PVP2002-1444 - Design and Analysis of Viscoelastic Seismic Dampers / N. Shimizu ; H. Nasuno ; T. Yazaki ; K. Sunakoda
PVP2002-1445 - Seismic Evaluation Procedures of Seismically Isolated Buildings Introduced to the Building Code of Japan / Mitsumasa Midorikawa ; Masanori liba ; Nagahide Kani ; Norihide Koshika ; Tatsuya Azhuhata
PVP2002-1446 - Semi-Active Vibration Isolation Control for Multi-Degree-of-Freedom Structures / Hidekazu Nishimura ; Yasuhiko Okumura ; Seiji Shimodaira
PVP2002-1447 - Seismic Control Effect for Nonlinear Benchmark Building Using Passive or Semi-Active Damper / Akira Fukukita ; Tomoo Saito ; Keiji Shiba
PVP2002-1448 - Stochastic Analysis of Sensitivity and Efficiency of Base Isolation System in Seismic Structural Protection / Vincenzo Dipaola ; Giuseppe Carlo Marano ; Rita Greco
PVP2002-1449 - Seismic Isolation Design Code for Highway Bridges / Kazuhiko Kawashima ; Shigeki Unjoh
Technologies for Seismic Mitigation
PVP2002-1450 - Impact Behavior of Rocking Bridge Piers / Chin-Tung Cheng ; Ming-Hsiang Shih
PVP2002-1451 - Reasonable Lateral Force Distributions on Isolated Structures
PVP2002-1452 - An Improved FPS Isolator for Seismic Mitigation on Steel Structure / Tsu-Cheng Chiang ; Chia-Kuan Cheng ; Wen-Shin Chen ; Chih-Wei Chang
PVP2002-1453 - Shaking Table Tests of Full Scale Base-Isolated Structures
Seismic Design Criteria, Design Code, and Failure Analysis of Piping Systems and High Pressure Gas Facilities / Vol.1:
PVP2002-1390 - Failure Behavior of Piping Systems With Wall Thinning Under Seismic Loading / Izumi Nakamura ; Akihito Otani ; Masaki Shiratori
PVP2002-1391 - Failure Analysis of Thinned Wall Elbows Under Excessive Seismic Loading / Yoji Ochi
61.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editors, Vikram N. Shah, F.L. Cho
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 194 p. ; 28 cm
シリーズ名: PVP ; vol. 444
所蔵情報: loading…
目次情報: 続きを見る
Aging Management and License Renewal: Introduction / Vikram N. Shah
PVP2002-1367 - Reactor Pressure Vessel Life Management at French PWR Plants / Anne Mermillod ; Georges Bezdikian ; Serge Rostain
PVP2002-1368 - Development of Evaluation Method on Integrity of RPV at the Upper Shelf Region / Kazunobu Sakamoto ; Shunichi Hatano
PVP2002-1369 - Ten Years Experience on Inconel Alloys Since the Bugey Leak in 1991 / Francois Champigny ; Claude Pages ; Claude Amzallag ; Francois Billy
PVP2002-1370 - License Renewal Demonstration Project / Barry J. Elliot ; Jerry Dozier
PVP2002-1371 - Generic Aging Management Programs for License Renewal of PWR Reactor Coolant System Components / V. N. Shah ; Y. Y. Liu
PVP2002-1372 - Aging Management of Reactor Coolant System Mechanical Components in Pressurized Water Reactors for License Renewal / M. Subudhi ; R. Morante ; A. D. Lee
PVP2002-1373 - The BWR RPV Internals Management Program of the German NPP Gundremmingen, Units B and C: Results and Conclusions / Martin Widera
PVP2002-1374 - High-Cycle Analytical Thermal Fatigue Test on Pipe Structures / J. M. Stephan ; F. Curtit
PVP2002-1375 - Life Management of Reactor Coolant Piping Probabilistic Calibration of Partial Safety Factors in Flaw Acceptance Criteria: Application to Cast Duplex Stainless Steel Components / Bruno Barthelet ; Christian Franco ; Patrick Le Delliou
PVP2002-1376 - Age-Related Degradation of Steam Generator Internals Based on Industry Responses to Generic Letter 97-06 / E. J. Sullivan, Jr.
PVP2002-1377 - Managing Aging of Coatings for Nuclear Power Plant License Renewal / Henry R. Miller
PVP2002-1378 - Taking Advantage of Signal Processing for Lifetime Management / S. Gautier ; L. Chatellier
PVP2002-1379 - An Economic Assessment Methodology for Replacement of the Components of Nuclear Power Plant / Ho-Rim Moonn ; Changheui Jang ; Jun-Hyun Park ; III-Seok Jeong ; Tae-Ryong Kim
PVP2002-1380 - Life Time Management: A Practical Approach of Nuclear Power Plants / Jaroslav Bartonicek ; Klaus-Juergen Metzner ; Friedrich Schoeckle
PVP2002-1381 - Industry Survey of Risk-Based Life Management Practices / Julian B. Speck ; Abdolreza T. M. Iravani
Reliability and Safety: Introduction / F. L. Cho
PVP2002-1382 - A Logic Model Approach to Conceptual Design of Scientific/Industrial Complex / Terry F. Bott ; Stephen W. Eisenhawer
PVP2002-1383 - Using QRA to Make Maintenance Trade-Off Decisions / John A. Farquharson ; Francois Choquette
PVP2002-1384 - Incorporating Total Quality Management Into Safety Program: General Approach / Boris Blyukher
PVP2002-1385 - Integrated Risk Evaluation for Probabilistic Safety Assessment Levels 1, 2, and 3 for Nuclear Power Plant Applications
PVP2002-1386 - Risk-Based Maintenance: A New Vision for Asset Integrity Management / Randal L. Montgomery ; Chris Serratella
PVP2002-1387 - Statistical Considerations for Determining Extent of Piping Inspections for RBI or API-570 Driven Inspections / D. Hobbs ; A. P.-D. Ku
PVP2002-1388 - Applications of Risk-Based Decision-Making Tools for Process Equipment Maintenance / William C. Satterfield
PVP2002-1389 - Optimal Control of Performance Risk for Large Potentially Dangerous Systems (LPDS) / Sviatoslav A. Timashev
Author Index
Aging Management and License Renewal: Introduction / Vikram N. Shah
PVP2002-1367 - Reactor Pressure Vessel Life Management at French PWR Plants / Anne Mermillod ; Georges Bezdikian ; Serge Rostain
PVP2002-1368 - Development of Evaluation Method on Integrity of RPV at the Upper Shelf Region / Kazunobu Sakamoto ; Shunichi Hatano
62.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  2 v. ; 28 cm
シリーズ名: PVP ; vol. 448
所蔵情報: loading…
目次情報: 続きを見る
Fundamentals, Codes and Post-Processing / Volume 1:
PVP2002-1530 - The Best Practice Guidelines for CFD: A European Initiative on Quality and Trust (Keynote) / Torsten Wintergerste ; Michael Casey ; Anthony G. Hutton
PVP2002-1531 - A Technique for Specifying Region of Interest in the Vector Field Based on 3D LIC / Koji Sakai ; Koji Koyamada ; Kazuma Kamisawa ; Akio Doi
PVP2002-1532 - CFD-Code Evaluation for Complex Interior Flows / H. Herwig ; H. Mocikat ; T. Gurtler
PVP2002-1533 - A Technique for Skeletonizing a Scalar Field Using a Critical Point Graph: Application to a Weather Simulation
PVP2002-1534 - Convergence Acceleration of K-[omega] Turbulence Equations With Multigrid / Soo Hyung Park ; Chun-ho Sung ; Jang Hyuk Kwon
PVP2002-1535 - Flow Visualization of the Evolution of Taylor Instabilities and Comparison With Numerical Simulations / M. J. Braun ; Vladimir Kudriavtsev ; Rajka Krstic Corder
PVP2002-1536 - Simulation of Artificial Turbulence by the Vortex Method / Yoshifumi Ogami ; Kazuie Nishiwaki ; Yoshinobu Yoshihara
Flow in Interaction with Electromagnetic Fields
PVP2002-1537 - A Three Dimensional Simulation Model for Liquid Phase Electroepitaxy Under Magnetic Field / Yoncai Liu ; Hamdi Sheibani ; Susumu Sakai ; Yasunori Okano ; Sadik Dost
PVP2002-1538 - Three-Dimensional Numerical Analyses on Liquid-Metal Magnetohydrodynamic Flow in Magnetic-Field Inlet-Region / Hiroshige Kumamaru
PVP2002-1539 - Numerical Analysis of Air Convection in a Vertical Cylindrical Container With and Without a Gravitational Field Under a Gradient of a Magnetic Field / Masato Akamatsu ; Mitsuo Higano ; Yoshio Takahashi ; Hiroyuki Ozoe
Reacting and Combusting Flows
PVP2002-1540 - Multi-Scale and Multi-Hierarchy Modeling in Electronic Materials Processing (Keynote) / Maurizio Masi ; Carlo Cavallotti ; Gianluca Valente ; Marco di Stanislao
PVP2002-1541 - Simulation of Silicon Dioxide Deposition in a Vertical 300 mm LPCVD Furnace / G. J. Schoof ; C. R. Kleijn ; H. E. A. Van den Akker ; T. G. M. Oosterlaken ; H. J. C. M. Terhorst ; F. Huussen
PVP2002-1542 - A Newton-Krylov Based Solver for Modeling Finite Rate Chemistry / David H. Wang ; Michael J. Bockelie ; Marc A. Cremer ; J.-Y. Chen
PVP2002-1543 - Numerical Modeling of Combustion Processes and Pollutants Formation in Direct Injection Diesel Engine / Hoo-Joong Kim ; Nam-II Heo ; Yong-Mo Kim ; Sung-Mo Kang ; Jae-Hyun Ahn
PVP2002-1544 - Multiscale Analysis of Nonequilibrium Rarefied Gas Flows (Keynote) / Yoichiro Matsumoto ; Yukinori Sakiyama
PVP2002-1545 - Density Distribution in Stagnation Region of Saffman Equation for Dusty Gas / Kazuhiro Tsuboi
PVP2002-1546 - Simulation of Inviscid Multi-Species Plasma Flow / Alexandre Martin ; Marcelo Reggio ; Jean-Yves Trepanier
PVP2002-1547 - Numerical Simulation of Full Oxy-Fired Oscillating Combustion / Ovidiu Marin ; Benjamin Bugeat ; Marc Till ; Olivier Louedin
PVP2002-1548 - Hydrogen Distribution, Combustion and Detonation for H2 Risk Analysis in Large Facilities / A. Beccantini ; N. Coulon ; F. Dabbene ; S. Gounand ; S. Kudriakov ; J. P. Magnaud ; H. Paillere
PVP2002-1549 - Numerical Analysis of Interaction Between Plasma Jet and Flame in Supersonic Flow / Kenichi Takita
PVP2002-1550 - Numerical Simulation of Non-Premixed Diffusion Flame and Reaction Product Aerosol Behavior in Liquid Metal Pool Combustion / Akira Yamaguchi ; Yuji Tajima
PVP2002-1551 - Numerical Modeling of Eccentric Jet Precombustor / Sun Yezhu
Flow in Turbomachinery and Engines
PVP2002-1552 - Validated 1D/3D Coupling Method to Solve Transient Flow in Internal Combustion Engines / Rory Sinclair ; Peter Schindler ; Tim Strauss
PVP2002-1553 - Large Eddy Simulation of Turbulent Combustion Flows in Gas Turbine Combustor / Takuji Tominaga ; Nobuyuki Taniguchi ; Yuichi Itoh ; Toshio Kobayashi
PVP2002-1554 - Using CFD to Improve Aero-Engine Air/Oil Separator Design / Carol Eastwick ; Stephen Hibberd ; Kathy Simmons ; Yi Wang ; Ian Care ; Abdelwahab Aroussi
Flow in Biological and Medical Systems
PVP2002-1555 - Design Analysis of the Volumatic: A CFD and Experimental Study / Vahid Jalili ; Mayur K. Patel ; Christopher Bailey ; Steve Begg ; Henk Versteeg ; Ian Shrubb ; Graham Hargrave
PVP2002-1556 - Three-Dimensional Flow Analysis in VFP Type Artificial Heart by Unstructured Grid / Satoyuki Kawano ; Takuma Kato ; Kazuhiro Nakahashi ; Atsushi Shirai ; Toshiyuki Hayase ; Tomoyuki Yambe ; Shin-Ichi Nitta ; Hiroyuki Hashimoto
PVP2002-1557 - CFD Analysis of the Behavior of Airborne Allergens in Carpeted and Uncarpeted Dwellings / Bradley A. Cicciarelli ; David L. Davidson ; Edward H. Hart ; P. Robert Peoples
PVP2002-1558 - Forced Flow Heat and Mass Transfer to a Cylinder Surrounded by a Porous Material With Applications to NBC Protective Clothing / Michael P. Sobera ; Chris R. Kleijn ; Paul Brasser ; Harry E. A. Van den Akker
PVP2002-1559 - Self-Excitation Vocalization Analyses of Vocal Chord Under Breathing Flow and Wide Frequency Change by Muscle Activation / Toshio Tsuta ; Takeshi Iwamoto ; Toshiyuki Shimizu ; Daisuke Egusa
Flow in Energy Systems
PVP2002-1560 - Computational Modelling and Simulation of Proton-Exchange Membrane Fuel Cells (Keynote) / N. Djilali ; T. Berning
PVP2002-1561 - Tools and Techniques for Modeling SOFC Fuel Cell Performance / Alton J. Reich ; Rupak Das ; J. Vernon Cole ; Sandip Mazumder
PVP2002-1562 - Three-Dimensional Modeling of a Medium Size Fuel Cell Stack: Thermal Effects and Electrical Performance
PVP2002-1563 - Numerical Experiments for Flow Around a Ducted Tip Hydrofoil / Hildur Ingvarsdottir ; Carl Ollivier-Gooch ; Sheldon I. Green
PVP2002-1564 - Development of Ultrasonic Temperature Sensors for Ultra-High Temperature Measurement in Nuclear Reactor Vessel / Kil-Mo Koo ; Kwang-Soon Ha ; Rae-Joon Park ; Sang-Baik Kim ; Hee-Dong Kim ; Hee-Young Kang
PVP2002-1565 - Automatic Design of Hydropower Flows: The Draft Tube / M. Lindgren ; B. D. M Marjavaara ; T. S. Lundstrom
PVP2002-1566 - A Numerical Study of BWR Steam Separator / Haruo Terasaka ; Sensuke Shimizu
PVP2002-1567 - CFD Analysis of Turbulent Flow in a Nuclear Fuel Bundle With Mixing Vane / Wang Kee In ; Dong Seok Oh ; Tae Hyun Chun
Flow in Multiphase Systems
PVP2002-1568 - Numerical Study of the Two-Phase Air/Oil Flow Within an Aero-Engine Bearing Chamber Model Using a Coupled Lagrangian Droplet Tracking Method
Author Index
PVP2002-1569 - Transient 3D Simulation of the Turbulent Gas Solid Flow in Large Scale Risers Using a Density Based Solution Algorithm / Asit K. Das ; Gorik Van engelandt ; Guy B. Marin ; Geraldine J. HeynderickxVolume 2:
PVP2002-1570 - Multiphase Flow Investigation of a Centrifugal Filter Using Computational Fluid Dynamics and Experiments / Steven D. Megson ; Michael Wilson ; Stuart A. MacGregor
Flow and Mixing
PVP2002-1571 - A Comparison of Several CFD Approaches for Predicting Gas-Liquid Contacting in a Cylindrical Tank Agitated With a Single Rushton Turbine / Paul A. Gillis ; Gerrit Hommersom ; Matthias Schafer
PVP2002-1572 - Numerical Investigations of a Turbulence Mixing Process Related to Thermal Striping Phenomena at a T-Junction of Liquid Metal Fast Reactor Piping Systems / Toshiharu Muramatsu
PVP2002-1573 - CFD Approach of Growing Cu-Particles in a 'Kenics' Static Mixer Reactor / W. F. C. van Wageningen ; R. F. Mudde ; H. E. A. van den Akker
PVP2002-1574 - Computation of Fluid-Structure Interaction in a Static Mixer Using MpCCI
PVP2002-1575 - Simulation of the Laminar Flow in a PRIMIX Static Mixer / C. Van Pijpen ; R. Beugels
Flow and Fluid-Structure Interaction
PVP2002-1576 - Large-Eddy Simulations of Flow Induced Vibrations in a Vacuum Flasher Unit / D. K. Tafti ; R. G. Menon
PVP2002-1577 - Interactive Simulation of Gas Decompression and Crack Propagation in Natural Gas Transmission Pipelines / Hiroyuki Makino ; Yoshiaki Kawaguchi ; Shu Takagi ; Shinobu Yoshimura
PVP2002-1578 - Modeling of Structural Vibration for Motor Chamber Internal Flow Studies / D. R. Greatrix ; V. Kudriavtsev
PVP2002-1579 - Tubular Structure Deformation Under the Thermal Loads of Two Fluids / Krishnamurthy Suresh ; Yves Dagba ; Amita Tripathi
PVP2002-1580 - Numerical Analysis on Wave Dynamic Processes in Pulse Detonation Devices / Z. L. Jiang ; C. Wang ; Z. M. Hu ; W. Zhao
Various Applications of Industrial CFD
PVP2002-1581 - CFD Modeling of Steam Methane Reformer / Vibhor Mehrotra ; Brigette Rosendall ; Alasdair Heath ; Jonathan Berkoe
PVP2002-1582 - Effects on Prandtl Number and Transpiration Parameter on a Certain MHD Free Convection Flow With Visco-Elastic Fluid Along an Infinite Vertical Porous Plate / M. N. Islam
PVP2002-1583 - Numerical and Experimental Analysis of an Evaporation Cooler / Robert Kickinger ; Peter Wimmer ; Helmut Leibinger
PVP2002-1584 - Numerical Analysis of Phase Change and Natural Convection Phenomena During Pipe Freezing Process / Gi Ho Jeong ; Byung Jin Ahn ; Young Sik Seong ; Kui Soon Kim
PVP2002-1585 - The Development and Validation of Fast Numerical Method of Simulating Wet Steam Flow / Dongyang Zhang ; Jianjun Liu ; Hongde Jiang
PVP2002-1586 - Reynolds Stress Turbulence Models for Prediction of Shear Stress Terms in Cross Flow Film Cooling-Numerical Simulation / Aliyar Javadi ; Khodayar Javadi ; Mohamad Taeibi-Rahni ; Mohammad Reza Keimasi
PVP2002-1587 - Modeling the Airflow Around Cooling Towers With Multi-Block CFD / Zhiqiang Zhai ; Song Fu
PVP2002-1588 - Applying CFD for Design of Gas Conditioning Towers With Swirling Flow / Niels F. Nielsen ; Leif Lind
PVP2002-1589 - Numerical Calculations of Wing Tip Vortices and Effects of Suction at Wing Tip / S. Okada ; N. Arai ; K. Hiraoka
PVP2002-1590 - Investigation of Two-Equation Turbulence Models Applied to a Confined Axis-Symmetric Swirling Flow / Ulf Engdar ; Jens Klingmann
PVP2002-1591 - Numerical Simulation of Asymmetric Exhaust Flows Using an Actuator Disc Blade Row Model
PVP2002-1592 - A Model for Simulation Heat Transfer in Porous Media / Mahesh M. Athavale
PVP2002-1593 - Turbulence and Fiber Orientation in the Converging Section of a Paper-Machine Headbox / Suqin Dong ; Xiaosi Feng ; Martha Salcudean ; Ian Gartshore ; Mohammad Shariati
PVP2002-1594 - Use of CFD to Design a Melt Blowing Die / Holly M. Krutka ; Robert L. Shambaugh ; Dimitrios V. Papavassiliou
PVP2002-1595 - The Reconstructive Method for the Enhancement of Depth Resolution for Acoustic Image Using the Spatial Frequency Response in NPPs' Material / Dong-In Oh ; Chi-Seung Park ; Soon-Sin Hong ; Sun-Jin Kim
PVP2002-1596 - Semi-Empirical Approach to Predicting Temperatures of a Non-Opaque Surface / Bob Bush ; Shu Li
PVP2002-1597 - A Technique for Developing a Precise Thermal Compact Model / Keishi Okamoto ; Kohji Koyamada ; Masanori Kuzuno ; Toshihiko Nishio ; Hidetoshi Kotera
PVP2002-1598 - Numerical Simulation of a Specialty Optical Fibre Drawing Process / Katja Lyytikainen ; Peter Raback ; Juha Ruokolainen
PVP2002-1599 - CFD Application to Construction of Hazard Maps of Volcanic Eruptions / T. Saito ; H. Yamashita ; K. Takayama
CFD of Flow with Heat Transfer
PVP2002-1600 - Advanced Hydrodynamic Design of Vertical Diffuser Pumps Using Computational Fluid Dynamics / Kristis V. Michaelides ; Antonios Tourlidakis
PVP2002-1601 - CFD Simulation of the Sidewall Fired Tubular Reforming Furnace / Per Nielsen ; Lars J. Christiansen
PVP2002-1602 - An Assessment of PDP Installed with Various Ribbed Heat Spreader for Cooling Enhancement / Jaejung Kim ; Hongkoo Roh ; Deoghee Doh ; Seogweon Chang
PVP2002-1603 - Three-Dimensional Modeling of Lime Kilns / M. Georgallis ; P. Nowak ; M. Salcudean ; I. S. Gartshore
PVP2002-1604 - Three-Dimensional Thermal-Hydraulic Analysis in Slit Finned-Tube Heat Exchangers / Jiin-Yuh Jang ; Jer-Nan Yeh ; Her-Chang Ay
PVP2002-1605 - Flow Separation and Heat Transfer in Shear Flow Around a Wall-Mounted Obstacle / S. Mahapatra ; S. Bhattacharyya
Fundamentals, Codes and Post-Processing / Volume 1:
PVP2002-1530 - The Best Practice Guidelines for CFD: A European Initiative on Quality and Trust (Keynote) / Torsten Wintergerste ; Michael Casey ; Anthony G. Hutton
PVP2002-1531 - A Technique for Specifying Region of Interest in the Vector Field Based on 3D LIC / Koji Sakai ; Koji Koyamada ; Kazuma Kamisawa ; Akio Doi
63.

図書

図書
ASME Pressure Vessels and Piping Conference ; American Society of Mechanical Engineers. Pressure Vessels and Piping Division ; Hafner, Ronald S.
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  vi, 146 p. ; 28 cm
シリーズ名: PVP ; vol. 449
所蔵情報: loading…
目次情報: 続きを見る
PVP2002-1606 - An Analysis of a Spent Fuel Transportation Cask Under Severe Fire Accident Conditions / Christopher S. Bajwa
PVP2002-1607 - A Plutonium Storage Container Pressure Measurement Technique / T. J. Grim ; S. J. Hensel
PVP2002-1608 - A Pre-Shipment Gas Generation Test Using a Bell Jar / G. C. Rodrigues
PVP2002-1609 - Evaluation of Postulated Spent Fuel Container Handling Accidents Using Numerical Simulations / Greg D. Morandin ; David J. Ribbans
PVP2002-1610 - Dynamic Impact Analysis of a Type A Fissile Package Consisting of Thin Gage Mild Carbon Steel Components Arranged for High Energy Absorption / Tsu-te Wu ; Daniel Leduc
PVP2002-1611 - A Technique for Dynamic Analyses of Containers With Locking-Ring Closures
PVP2002-1612 - Effect of Temperature and Humidity on Crush Strength of Cellulose Fiberboard Assemblies / Allen C. Smith ; Philip R. Vormelker ; Glenn K. Chapman ; Greg D. Creech ; Jamil Khan ; Mir Zahedul Huq Khandkar ; Kenneth W. Miller
PVP2002-1613 - Recent Progress on the Standardized DOE Spent Nuclear Fuel Canister / D. Keith Morton ; Spencer D. Snow ; Tom E. Rahl ; Tom J. Hill ; Richard P. Morissette
PVP2002-1614 - Electrochemical Behavior of Alloy 22 in 5 M CaCl2 / G. O. Ilevbare
PVP2002-1615 - Passive Corrosion Behavior of Alloy 22 in Multi-Ionic Aqueous Environments / Tiangan Lian ; John C. Estill ; Gary A. Hust ; Dave V. Fix ; Raul B. Rebak
PVP2002-1616 - Test Results Using a Bell Jar to Measure Containment Vessel Pressurization
PVP2002-1617 - Response of Conventional Ring Closures of Drum Type Packages to Regulatory Drop Tests With Application to the 9974/9975 Package / Paul S. Blanton
PVP2002-1618 - Proposal for Qualification of Gas-Generating Radioactive Payloads for Transportation Within a Type B Package / T. K. Houghtaling
PVP2002-1619 - Strain Gage Test Results of Band-Type Locking Rings for a Typical Drum Type Radioactive Material Package / Charles A. McKeel
PVP2002-1620 - Characterization of the Resistance of Alloy 22 to Stress Corrosion Cracking / Kenneth J. King
PVP2002-1621 - Mechanical Properties and Corrosion Characteristics of Thermally Aged Alloy 22 / Paul Crook
PVP2002-1622 - Effect of Insolation Boundary Conditions on Type B Package Internal Temperatures / J. Hovingh ; V. Shah
PVP2002-1623 - A Standard for Storage and Transport of Damaged Spent Nuclear Fuel / William H. Lake
PVP2002-1624 - Transfer Cask Assembly: Onsite Transfer of K-Basin Fuel at Hanford / Donald A. Jensen ; Andrew T. Kee ; Robert A. Johnson ; Philip W. Noss
PVP2002-1625 - MOX Fresh Fuel Packaging: Status of Full Scale Prototype Testing / J. G. Field ; J. C. Nichols ; P. W. Noss
PVP2002-1626 - Gamma Scan Confirmation of Lead Pour in a Type B Cask / R. J. Migliore ; D. S. Hillstrom ; R. A. Johnson
Author Index
PVP2002-1606 - An Analysis of a Spent Fuel Transportation Cask Under Severe Fire Accident Conditions / Christopher S. Bajwa
PVP2002-1607 - A Plutonium Storage Container Pressure Measurement Technique / T. J. Grim ; S. J. Hensel
PVP2002-1608 - A Pre-Shipment Gas Generation Test Using a Bell Jar / G. C. Rodrigues
64.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Howard H. Chung, Young W. Kwon
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2002  v, 259 p. ; 28 cm
シリーズ名: PVP ; vol. 451
所蔵情報: loading…
目次情報: 続きを見る
Introduction / Howard H. Chung ; Young W. Kwon
IMECE2002-32078 Stress Intensity Factors and Crack Paths for Cracks in Photoelastic Motor Grain Models / C. W. Smith ; D. M. Constantinescu ; C. T. Liu
IMECE2002-32079 Study of Microstructural Effect in Particulate Composites / Y. W. Kwon
IMECE2002-32289 A General Numerical Procedure for Extracting Mixed-Mode Stress Intensity Factors Along the Fronts of Three-Dimensional Nonplanar Cracks / M. Gosz ; R. Cammino
IMECE2002-32290 Identification of Critical Surface Displacement Parameters for Characterization of Subsurface Flaws / Paul D. Herrington ; Paul J. Schilling ; Melody A. Verges ; Prashanth K. Durgam
IMECE2002-32291 Break Up Patterns of a Linear String of Balls Hit by a Cue Ball / Oleg Vinogradov
IMECE2002-32292 Computational Methods for the Design of Deformation Processes of Porous Materials / Nicholas Zabaras ; Shankar Ganapathysubramanian
IMECE2002-32294 Computational Nanomechanics / S. Jung
IMECE2002-32295 Nonlinear 3D Finite Element Formulation for the Analysis of Submarine Pipelines During Laying Operations / Marco Ciaccia ; Cora Martinez ; Raul Goncalves
IMECE2002-32296 Buckling and Postbuckling of Electroconducting Elastic Plates in a Magnetic Field / Davresh Hasanyan ; Liviu Librescu ; Damodar R. Ambur
IMECE2002-32297 Buckling of Cracked Cylindrical Shells With Internal Pressure Subjected to an Axial Load / A. Vaziri ; H. E. Estekanchi ; H. Nayeb-Hashemi
IMECE2002-32298 Comparison of Vibration Characteristics of Stiffened Composite Shallow Circular Cylindrical Shell Panels / V. Ozerciyes ; U. Yuceoglu
IMECE2002-32299 Comparison of Different Shell Theories for Large-Amplitude Vibrations of Circular Cylindrical Shells / M. Amabili
IMECE2002-32300 Effects of Local Energy Loss on the Dynamic Response of a Cylindrical Bar With a Penny Shape Crack
IMECE2002-32301 Vibrocreep and Cyclic Damage of Polymers / Aleksandra M. Vonogradov
IMECE2002-32303 Fatigue Analysis of a Welded Lap Joint Under Bending Load / Kenny Koay ; Brad Bracht ; Vance Browne
IMECE2002-32304 Fatigue Assessment for Combined HCF/LCF Loading / Damir T. Jelaska
IMECE2002-32305 Investigation of Fracture in Transparent Glass Fiber Reinforced Polymer Composites Using Photoelasticity / Sanjeev K. Khanna ; Marius D. Ellingsen ; Robb M. Winter
IMECE2002-32306 Behavior of Thin, Moderately Thick and Thick Woven Composites Subjected to Low Velocity Impact Loads / Ajit D. Kelkar
IMECE2002-32309 Low Temperature Effects on IM7/977-3 Cross-Ply Composite Material Properties at High Strain Rates / Shunjun Song ; Jack R. Vinson
IMECE2002-32312 Mechanical Modeling of Fabrics in Bending / T. J. Lahey ; G. R. Heppler
IMECE2002-32316 Modeling and Analysis of 1-3 Piezoelectric Composites / Sanjay Nakhwa ; Anil Saigal
IMECE2002-32322 Micro-Electromechanics of Sensor Patches of Free Paraboloidal Shell Structronic Systems / J. H. Ding ; H. S. Tzou
IMECE2002-32325 Optimization of Machine Tool Structures Based on Static and Dynamic Criteria / Emmanuil Kushnir ; Robert Newton ; Mark Tuccio
IMECE2002-32328 Constitutive Modeling of Controllable Electrostrictive Structronic Thin Shells / W. K. Chai
IMECE2002-32329 Control of Largely-Deformed Nonlinear Electro/Elastic Beam and Plate Systems: Finite Element Formulation and Analysis / D. W. Wang ; H.-J. Lee
IMECE2002-39285 Multi-Scale Strain Measurements of a Particulate Composite Material / G. Ravichandran
IMECE2002-39290 Computational Process Simulation and Energy Parameter Analysis From Mechanical Deformation of Aerospace Alunimum Alloys / James M. Fragomeni ; Giridhar Venugopal
IMECE2002-39412 Determination of Nanomechanical Properties of Polyester Matrix Composite Using Nanoindentation / Samatha B. Yedla ; M. Kalukanimuttam ; R. M. Winter
Author Index
Introduction / Howard H. Chung ; Young W. Kwon
IMECE2002-32078 Stress Intensity Factors and Crack Paths for Cracks in Photoelastic Motor Grain Models / C. W. Smith ; D. M. Constantinescu ; C. T. Liu
IMECE2002-32079 Study of Microstructural Effect in Particulate Composites / Y. W. Kwon
65.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Larry H. Sobel, Kevin Thomas
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1984  iv, 196 p. ; 25 cm
シリーズ名: PVP ; vol. 84
所蔵情報: loading…
66.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, G.S. Chakrabarti ; contributing editors, B.T. Lubin ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  ix, 299 p. ; 28 cm
シリーズ名: PVP ; v. 453
所蔵情報: loading…
67.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, G.S. Chakrabarti ; contributing editors, K. Hasegawa ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2004  x, 402 p. ; 28 cm
シリーズ名: PVP ; v. 480
所蔵情報: loading…
目次情報: 続きを見る
Plastic Analysis in Pressure Vessel Design
Introduction / Arturs Kalnins
PVP2004-2667 Finite Element Modelling of Fatigue Damage Using a Continuum Damage Mechanics Approach / A. M. P. De Jesus ; A. S. Ribeiro ; A. A. Fernandes
PVP2004-2668 Fatigue Analysis in Pressure Vessel Design by Local Strain Approach: Methods and Software Requirements
PVP2004-2669 Design Criteria for Biaxial/Multiaxial Low Cycle Fatigue / Takamoto Itoh ; Masao Sakane ; Takahiro Hata
PVP2004-2670 Life Prediction for Notched Components in Nonproportional Low Cycle Fatigue: Experiment and FEM Analysis / Tsuneo Itoh ; Tomoshige Susaki ; Yoshiyasu Kawazo
PVP2004-2671 Transitional Behavior of Residual Fatigue Life After Applying Overload During Fatigue Crack Growth With Constant Stress Amplitude / Anindito Pumowidodo ; Tatsujiro Miyazaki ; Chobin Makabe ; Arthur J. McEvily
PVP2004-2672 A Method of Detecting Fatigue Crack Initiation and an Application of an Overload Using Local Strains / Hideo Kaneshiro
PVP2004-2673 Plastic Loads for Internally Pressurized Toroidal Shells / J. Blachut
Environmental Fatigue Issues in the ASME B&PV Code
PVP2004-2674 Fatigue Crack Growth Curve for Austenitic Stainless Steels in PWR Environment / David P. Jones ; Yuichiro Nomura ; Kazuya Tsutsumi ; Hiroshi Kanasaki ; Naoki Chigusa ; Kazuhiro Jotaki ; Hidetaka Shimizu ; Takashi Hirose ; Hitsohi Ohata
PVP2004-2675 Fatigue Crack Propagation Tests on 304 Stainless Steel in High Temperature Water-Accelerated Cracking Rates and Transition to Lower Rates / G. L. Wire ; W. M. Evans ; W. J. Mills
PVP2004-2676 Corrosion Fatigue Behavior of Low-Alloy Pressure Vessel Steels in High Temperature Water Under Multi-Factor Conditions / Xinqiang Wu ; Yasuyuki Katada
PVP2004-2677 The Incorporation of a Fatigue Threshold Concept Into a Known Superposition Crack Growth Model for Alloy 690 in High Temperature, Low Oxygen Water / Bruce A. Young
PVP2004-2678 Evaluation of Environmental Effects on the Fatigue of Notched Specimen of Austenitic Stainless Steel Using Modified Rate Approach Method / Katsumi Sakaguchi ; Yasuhide Asada ; Masao Itatani ; Toshiyuki Saito
PVP2004-2679 The Modified Rate Approach Method to Evaluate Fatigue Life Under Synchronously Changing Temperature and Strain Rate in Elevated Temperature Water in Austenitic Stainless Steel / Makoto Higuchi
PVP2004-2680 Effects of Water Flow Rate on Fatigue Life of Carbon and Stainless Steels in Simulated LWR Environment / Akihiko Hirano ; Michiyoshi Yamamoto ; Tetsuo Shoji
PVP2004-2681 Effect of Hydrogenated Water on Fatigue Crack Growth for Austenitic Stainless Steel in Simulated BWR Water Environment / Li H. Wang
PVP2004-2682 Evaluation of Fatigue Damage on Operating Plant Components in LWR Water / Takashi Hirano
Structural Integrity of Pressure Components
PVP2004-2683 Design Issues and Considerations During Reactor Vessel Head Replacement, Steam Generator Replacement, and Steam Generator Snubber Elimination at Nuclear Power Plants / Yogeshwar Hari ; Dilip Bhavnani ; James Annett
PVP2004-2684 Code Compliance of a PWR Charging Line Nozzle / Daniel J. Vasquez ; Nitin J. Shah ; Keshab K. Dwivedy
PVP2004-2685 A Parametric Study of ASME B 16.5 Flanges Which Has Experienced Flange Face Corrosion / C. Nadarajah
PVP2004-2686 Finite Element Analysis of a Slab Tank
PVP2004-2687 Analysis of a Hemispherical Head With Nozzle and Local Thin Area / Michael W. Guillot ; Jack E. Helms
PVP2004-2688 Integrity Assessment of Pressure Components With Local Hot Spots / R. Seshadri
PVP2004-2689 B[subscript 2]' Stress Indices for Elbows Using Non-Linear Finite Element Analysis / K. Venkataramana ; V. Bhasin ; K. K. Vaze ; H. S. Kushwaha
Aspects of the JSME Code
PVP2004-2690 Outline of the JSME (Japan Society of Mechanical Engineers) Rules on Design and Construction for Nuclear Power Plants / Kunio Hasegawa ; Itaru Saito ; Takashi Shimakawa
PVP2004-2691 Outline of the JSME Rules on Design and Construction for Thermal Power Generation Facilities / Isoharu Nishiguchi ; Masaaki Fujita ; Seiichi Hamada
PVP2004-2692 JSME Code on Protection Design Against Postulated Pipe Rupture for Nuclear Power Plants / Keisuke Kitsukawa ; Hiroshi Yokota ; Koichi Murayama ; Hiroshi Ueda ; Yasukazu Takada ; Hideo Kobayashi
PVP2004-2693 First Publication of the Nuclear Materials Code for Nuclear Facilities in Japan / Hiroyoshi Murakami
PVP2004-2694 Implementation of Regulatory Rules on Fitness-for-Service for Nuclear Power Plants in Japan / Takehiko Nakamura ; Tetsuya Yamamoto ; Iwao Oshima ; Kiyoshi Takasaka ; Yukio Hirano ; Eiji Hiraoka
PVP2004-2695 Current Status of Japanese Code on Fitness-for-Service for Nuclear Power Plants / Koichi Kashima ; Tomonori Nomura ; Koji Koyama
PVP2004-2696 Study on Flaw Acceptance Standard of ASME Code Sec. XI Based on Failure Probability / Katsuyuki Shibata ; Kunio Onizawa ; YinSheng Li ; Yasuhiro Kanto ; Shinobu Yoshimura
PVP2004-2697 Application of Potential Drop Technique to the Inspection of Welded Boiler Pressure Parts / Yasuki Ogawa ; Hideo Iida ; Tomoki Kuroiwa ; Masahiko Kuroki ; Manabu Hayakawa
PVP2004-2698 Reliability Assessment of Piping in a Nuclear Power Plant Considering Flaw Detection Probability / Hideo Machida ; Norimichi Yamashita ; Genki Yagawa
What's New in Codes and Standards
PVP2004-2699 What's New in Section I (2001 Through 2003) / Mahendra D. Rana ; John R. MacKay
PVP2004-2700 What's New in ASME Section II, Materials: 2004 / Michael Gold
PVP2004-2701 What's New in Section XI (Welding) / Joel G. Feldstein
PVP2004-2702 Application Experiences of ASME Section III Code in Korea / Sung Pyo Choi ; Nam Ha Kim
PVP2004-2703 What's New in Section XI, Rules for Inservice Inspection of Nuclear Power Plant Components / Gary Park
PVP2004-2704 What's New in Section VIII (2002 Through 2003) / Thomas P. Pastor
PVP2004-2705 Comparative Study: EN 13445/ASME Section VIII Div. 1 & 2 / Reinhard Preiss ; Josef L. Zeman
PVP2004-2706 Background and Summary of Revisions to Appendix M of ASME Section VIII, Division 1: Stop Valves Located in the Pressure Relief Path / Richard J. Basile ; Clay D. Rodery
PVP2004-2707 Technical Changes in ASME B31.3, 2004 Edition / Charles Becht IV
Developments in Section XI of ASME Code
PVP2004-2708 Technical Basis for Equations for Stress Intensity Factor Coefficients in ASME Section XI Appendix A / Russell C. Cipolla ; Douglas A. Scarth ; Darrell R. Lee
PVP2004-2709 Background and Technical Basis for the Evaluation of Flaws in PWR Reactor Vessel Head Penetration Regions / Warren Bamford ; Guy De Boo
PVP2004-2710 Technical Basis for Acceptance of Flaws in Moderate Energy Class 2 and 3 Vessels and Tanks / Pat L. Strauch ; Warren H. Bamford, Jr. ; Sushil K. Daftuar
PVP2004-2711 Validation of Pipe Flaw Evaluation Procedures in Section XI of the ASME Code Against Pipe Fracture Experiments / Phuong H. Hoang ; Gery M. Wilkowski
Fatigue and Fracture
PVP2004-2712 Failure Stresses for Pipes With Multiple Circumferential Flaws
PVP2004-2713 Experimental Study for Proximity Rule of Multiple Flaws for Ductile Fracture / Katsumasa Miyazaki ; Takeshi Shimamura
PVP2004-2714 Seismic Loads for Crack Stability Assessment in a Review of Lead-Before-Break (LBB) Applicability
PVP2004-2715 Main Surface Crack Propagation and Crack Initiation and Propagation on Counter Plain Surface Under Cyclic Bending / Jin'ichiro Gotoh ; Saburo Usami ; Hiroshi Morita
Pipe Wall Thinning
PVP2004-2716 Fracture and Deformation Behaviors of Tee Pipe With Local Wall Thinning Under Monotonic Bending / Koji Takahashi ; Kotoji Ando ; Masakazu Hisatsune
PVP2004-2717 Allowable Limit and Finite Element Analysis of Pipes With Local Wall Thinning Subjected to Bending Moment / Seok Hwan Ahn ; Ki Woo Nam
PVP2004-2718 Finite Element Analysis on the Failure Behavior of Straight Pipe With Wall Thinning / Ken Inoue
Author Index
Plastic Analysis in Pressure Vessel Design
Introduction / Arturs Kalnins
PVP2004-2667 Finite Element Modelling of Fatigue Damage Using a Continuum Damage Mechanics Approach / A. M. P. De Jesus ; A. S. Ribeiro ; A. A. Fernandes
68.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, F.J. Moody ; contributing editors, J.C. Jo ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 186 p. ; 28 cm
シリーズ名: PVP ; v. 454
所蔵情報: loading…
69.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Daniel T. Peters ; contributing editors, Tom Kovach, Jan G. Keltjens
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 105 p. ; 28 cm
シリーズ名: PVP ; v. 455
所蔵情報: loading…
70.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Chiaki Miyasaka
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 163 p. ; 28 cm
シリーズ名: PVP ; v. 456
所蔵情報: loading…
71.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by, Abdel-Hakim Bouzid, Toshiyuki Sawa
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 149 p. ; 28 cm
シリーズ名: PVP ; v. 457
所蔵情報: loading…
72.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Wolf Reinhardt, John Martin
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  viii, 350 p. ; 29 cm
シリーズ名: PVP ; v. 458
所蔵情報: loading…
73.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M.B. Ruggles-Wrenn ; contributing editors, W.J. Koves ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c2003  vi, 165 p. ; 28 cm
シリーズ名: PVP ; v. 459
所蔵情報: loading…
目次情報: 続きを見る
Fitness for Service, Life Extension, Remediation and Repair
Introduction / W. J. Koves
PVP2003-1922 Corrosion Fatigue Failure Analysis and Life Prediction / Fred V. Ellis ; Sebastian Tordonato
PVP2003-1923 Tensile Properties of Boiler Materials for FAD Based Failure Analysis
PVP2003-1924 Limit Load Concepts in Fitness for Purpose Assessment of Flat Endcaps / D. L. Marriott
PVP2003-1925 Simplified J-Integral Evaluation Method for Evaluation of Reactor Pressure Vessel in the Upper-Shelf Region / Yoshio Urabe ; Seiji Asada ; Takatoshi Hirota ; Morihito Nakano ; Ryuuichi Maeda
PVP2003-1926 Fitness-for-Service and Remaining Useful Life Assessment of a Steam Drum / Raymond K. Yee
PVP2003-1927 Comparison of a Life Consumption Analysis to Section III, Subsection NH Design Rules for a Main Steam Girth Weld Creep Crack / Marvin J. Cohn
PVP2003-1928 Case Studies of Pulsed Eddy Current to Measure Wall Loss in Feedwater Heater Shells / Jordan W. Norton
PVP2003-1929 Analysis of Non-Uniformly Degraded Pipe Sections / Amy J. Smith ; Keshab K. Dwivedy
PVP2003-1930 External Weld Overlays for Repair of Pressure Components / Shane J. Findlan
Design and Analysis of Vessels and Components
PVP2003-1931 Comparison of Different Methodologies for Stress Analysis of Reinforcing Pads / D. H. Martens ; Michael W. Guillot ; Jack E. Helms
PVP2003-1932 Safety Assessment of the Junction Between a Thick Pressure Vessel Shell and a Thinner Hemispherical Head / Xiaochun Wang ; Jinyang Zheng
PVP2003-1933 Study of the Effect of Boundary Conditions on Residual Stresses in Welding Using Element Birth and Element Movement Techniques / Ihab F. Z. Fanous ; Maher Y. A. Younan ; Abdalla S. Wifi
PVP2003-1934 Three Turnaround Heat Treating Studies / Jaan Taagepera ; Marty Clift ; D. Mike DeHart ; Keneth Marden
PVP2003-1935 The Use of FEM in the Revamping of Existing Systems / Michael E. Porter ; Dennis H. Martens
PVP2003-1936 Thermo-Hydraulic Analysis in a Assembly Representatie of a Feedwater Nozzle / Xavier Boissiere ; Christian Laine ; Louis Doubliez
PVP2003-1937 Predictions of Residual Stresses in the Mechanical Roll Expansion of HX Tubes Into TEMA Grooves / Dennis K. Williams
Design and Analysis for Elevated Temperatures
PVP2003-1938 Evaluation of Short Term Creep-Rupture Strength of High Temperature P122 Boiler Material / John Pumwa
PVP2003-1939 Calculation of Stress Relaxation Properties for 1CrMoV Bolt Material
PVP2003-1940 A Modified Power Law for Creep Analysis / Michael Katcher
PVP2003-1941 Methods for the Evaluation of Creep Relaxation and the Amplitude of Reverse Plastic Strain for Bodies Subjected to Cyclic Loading / Haofeng Chen ; Alan R. S. Ponter
Author Index
Fitness for Service, Life Extension, Remediation and Repair
Introduction / W. J. Koves
PVP2003-1922 Corrosion Fatigue Failure Analysis and Life Prediction / Fred V. Ellis ; Sebastian Tordonato
74.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, the Canadian Society for Mechanical Engineers ; edited by Ahmad Chaaban
出版情報: New York : American Society of Mechanical Engineers, c1996  2 v. ; 28 cm
所蔵情報: loading…
目次情報:
v. 1. Fatigue/fracture, NDE, materials and manufacturing
v. 2. Design and analysis
v. 1. Fatigue/fracture, NDE, materials and manufacturing
v. 2. Design and analysis
75.

図書

図書
sponsored by Pressure Vessels and Piping Division, ASME, in cooperation with American Society for Nondestructive Testing ; edited by Donald O. Thompson, William F. Riley
出版情報: New York : American Society of Mechanical Engineers, c1983  ix, 78 p. ; 26 cm
所蔵情報: loading…
76.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, the NDE Engineering Division, ASME ; edited by J. F. Cook, Sr, D. C. Cowfer, C. C. Monahan
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 95 p. ; ill. ; 28 cm
シリーズ名: PVP ; vol. 322
NDE ; vol. 15
所蔵情報: loading…
77.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Y.S. Shin, J.A. Zukas
出版情報: New York : American Society of Mechanical Engineers, c1996  vi, 265 p. ; 28 cm
シリーズ名: PVP ; v. 325
所蔵情報: loading…
78.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, G.M. Hulbert ; contributing editors, K.H. Hsu, T.W. Lee, T. Nicholas
出版情報: New York : American Society of Mechanical Engineers, c1996  v, 211 p. ; 28 cm
シリーズ名: PVP ; vol. 326
所蔵情報: loading…
79.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, R.W. Warke ; contributing editors, P. Dong, A. Dermenjian
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 201 p. ; 28 cm
シリーズ名: PVP ; vol. 327
所蔵情報: loading…
80.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M.J. Pettigrew ; contributing editors, M.P. Paidoussis, D.S. Weaver, M.K. Au-Yang
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vii, 491 p. ; 28 cm
シリーズ名: PVP ; vol. 328
所蔵情報: loading…
81.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, S.J. Chang ; contributing editors, C.W. Lin ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1996  vi, 135 p. ; 28 cm
シリーズ名: PVP ; vol. 330
所蔵情報: loading…
82.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by A.A. Dermenjian
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 213 p. ; 28 cm
シリーズ名: PVP ; vol. 331
所蔵情報: loading…
83.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, I.T. Kisisel ; contributing editors, J. Sinnappan, D. Peterson
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 155 p. ; 28 cm
シリーズ名: PVP ; vol. 332
所蔵情報: loading…
84.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, H.H. Chung ; contributing editors, S.J. Brown, E.C. Goodling, Jr., L. Ike Ezekoye
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 261 p. ; 28 cm
シリーズ名: PVP ; vol. 333
所蔵情報: loading…
85.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, R.W. Carlson
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  v, 83 p. ; 28 cm
シリーズ名: PVP ; vol. 334
所蔵情報: loading…
86.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by W.H. Bamford ; contributing editors, M.J. Cohn ... [etal.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 261 p. ; 28 cm
シリーズ名: PVP ; vol. 335
所蔵情報: loading…
87.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, M. Prager ; contributing editors, D.L. Bagnoli ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vii, 373 p. ; 28 cm
シリーズ名: PVP ; vol. 336
所蔵情報: loading…
88.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by M.A. Saleem, M.L. Aggrawal
出版情報: New York : American Society of Mechanical Engineers, c1996  vii, 365 p. ; 28 cm
シリーズ名: PVP ; v. 340
所蔵情報: loading…
89.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by H. H. Chung, M. A. Saleem
出版情報: New York : American Society of Mechanical Engineers, c1996  vii. 139 p. ; 28 cm
シリーズ名: PVP ; v. 341
所蔵情報: loading…
90.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME [and] the Materials Division, ASME ; edited by Young W. Kwon, Daniel Davis, Howard H. Chung
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  vi, 235 p. ; 28 cm
シリーズ名: PVP ; vol. 342
MD ; vol. 72
所蔵情報: loading…
91.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; edited by Robert F. Sammataro, Douglas J. Ammerman
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  ix, 303 p. ; 28 cm
シリーズ名: PVP ; vol. 343
所蔵情報: loading…
目次情報: 続きを見る
Criteria and applications for inelastic structural analysis and design
Experimental validation of inelastic methods for structural analysis and design
Materials properties and constitutive modes for inelastic structural analysis and design
Applications of inelastic methods for structural analysis and design
Inelastic analysis for fracture and testing
Inelastic analysis for cyclic loading
Finite element formulations for inelastic analysis
Numerical studies in support of inelastic analysis
Criteria and applications for inelastic structural analysis and design
Experimental validation of inelastic methods for structural analysis and design
Materials properties and constitutive modes for inelastic structural analysis and design
92.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, the Safety Engineering and Risk Analysis Division, ASME ; edited by E.D. Jones, F.L. (Bill) Cho
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 371 p. ; 28 cm
シリーズ名: PVP ; vol. 320
SERA ; vol. 5
所蔵情報: loading…
93.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, the Nuclear Engineering Division, ASME ; edited by Howard H. Chung, Young W. Kwon
出版情報: New York : American Society of Mechanical Engineers, c1995  vi, 193 p. ; 28 cm
シリーズ名: PVP ; v. 321
NE ; v. 18
所蔵情報: loading…
94.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME, ; principal editor, Les Antalffy ; contributing editor, L. M. Picqueur
出版情報: New York : American Society of Mechanical Engineers, c1997  v, 91 p. ; 28 cm
シリーズ名: PVP ; v. 344
所蔵情報: loading…
95.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, G. B. Rawls ; contributing editor, M. A. Saleem ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1997  vi, 269 p. ; 28 cm
シリーズ名: PVP ; v. 345
所蔵情報: loading…
96.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, H.S. Mehta ; contributing editors, W. H. Bamford ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1997  2 v. ; 28 cm
シリーズ名: PVP ; vol. 346, 350
所蔵情報: loading…
97.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, William J. Bees ; contributing editor, J. R. Sims, Jr. ... [et al.]
出版情報: New York : American Society of Mechanical Engineers, c1997  vi, 267 p. ; 28 cm
シリーズ名: PVP ; v. 347
所蔵情報: loading…
98.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, R. S. Hafner ; contributing editor, R. W. Carlson, W. H. Lake, R. J. Gromada
出版情報: New York : American Society of Mechanical Engineers, c1997  v, 119 p. ; 28 cm
シリーズ名: PVP ; v. 348
所蔵情報: loading…
99.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, I. T. Kisisel ; contributing editor, J. Sinnappan
出版情報: New York : American Society of Mechanical Engineers, c1997  v, 155 p. ; 28 cm
シリーズ名: PVP ; v. 349
所蔵情報: loading…
100.

図書

図書
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Y. S. Shin ; contributing editors, J. A. Zukas, H. S. Levine, D. M. Jerome
出版情報: New York : American Society of Mechanical Engineers, c1997  vi, 399 p. ; 28 cm
シリーズ名: PVP ; v. 351
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼