Influence of POSS Content on the Thermal Properties of PAN/POSS Nanofibers / Sheng Zhi Zhou; Xiao Yan Song; Bo Wen Cheng |
Preparation and Flame Retardancy of Waterbased Phenolic Resin/Silica Hybrid Material Prepared by In Situ Polymerization / Tian Biao Yuan; Gui Long Xu; Yi Wang; Jin Yang; Jian Hu |
Effect of SiC and ZrO2 on Low Temperature Oxidation Resistance of MoSi2 Nanocomposites / Chang Hong Liu; Yun Long Ai; Bing Liang Liang |
Finite Element Analysis of Diamond Wire Saw Slicing SiCp-Al Composites / Chun Yan Zhang; Yuan Sun; Li Gang Zhao |
Simulated Sun-Light-Driven Degradation of Rhodamine B by Porous Peanut-like Sm-Doped BiVO4 Sub-Microstructures / Bao Wei Cao; Yun Hua Xu |
Effect of Load on the Tribology Behavior of Cu-Based Self-Lubricating Composite / Run Guo Zheng; Xin Xing Zhang |
Structural and Tribological Properties of MoS2/Polyimide Composites Exposed to Atomic Oxygen Environment / Xiang Li Wang |
Fabrication of Diamond-Structure Alumina Photonic Crystal with Rectangle Cavity Defect and its Microwave Properties / Shi Bin Chen; Yun Shi Yao; Rui Long Wang |
The Influence of Sintering Temperature on the Mechanical Properties and Microstructure of Carbon Nanotubes/Zirconia/Hydroxyapatite Biocomposites / Ai Min Li; Kang Ning Sun; Run Hua Fan |
Warm Compaction and Characterization of Paniculate Reinforced CSP/Al Composite Material / Hong Zhang; Wei Hua; Qing Ding Wu |
Analysis to Mullite Bonded Corundum Purging Plug / Xue Hua Ren; Ping Zhao; Qi Hui Lai; Xuan Qin |
Effects of MAPE Modified on Physico-Mechanical Properties of Silvergrass Reinforced High Density Polyethylene Composites / Wang Wang Yu; Cai Hong Li; Juan Li; Jian Peng Zhang; Chang Wei Wang |
Quasi-Static Out-of-Plane Compression of Hollow Integrated Woven Textile Sandwich Composites / Wei Su; Yong Xiang; Yi Fan Jiang; Shi Qing Huang; Hua Lin Fan; Ren Huai Liu |
Characterization of Cold-Sprayed FeAl/WC Nanocomposite Coating / Hong Tao Wang; Ruo Yu Wang; Xiao Chen; Xiao Bo Bai; Zeng Xiang Dong; Gang Chang Ji |
Study on TiO2/Tourmaline Composite Photocatalyst Materials / Yan Wen Feng |
Comparative Study on Design Schemes of Composite Holding Pole Structure / Da Ni; Qian Miao; Yong Jun Xia; Yu Jing Hao |
An Evaluation on Impact Performance of Light-Weight Composite Honeycomb Sandwich Panels / Jin Ren; Yutaka Iwakawa; Jian Mei He |
Effects of PMDI Treatments on Thermal Properties of Silvergrass Reinforced High Density Polyethylene Composites / Dong Xue; Wang Wang Yu; Qin Liu; Lu Jing; Xue Jing Liu; Wen Lei |
Piezoresistivity of Polymer-Derived AlSiCN Ceramics / Li Gong Zhang; Yan Song Wang; Li Nan An |
Efficient Analysis of the Electromagnetic Energy in Dispersive Composite Materials / Kang Bo Tan; Yi Chao Song; Tao Su; F. F. Fan; Hong Min Lu |
Multifunctional Non-Woven Carbon Nanopaper: Fabrication, Properties, and Applications / Ji Hua Gou; Fei Liang; Yun Jun Xu; Bob Mabbott |
Preparation of Continuous Electrospun Nanofiber Yarn with an Auxiliary Rotating Circular Plate / Wei Jie Gao; Xiao E Wang; Kun Wang; Jie Fan; Yong Liu |
Current Automatic Control Technology for n-Type Macroporous Silicon Photo-Electrochemical Etching / Xiao Na Li; Guo Zheng Wang; Feng Yuan Yu; Yao Zhang; Yong Zhao Liang; Jin Chai; Ji Kai Yang; Qing Duo Duanmu |
The Influence of Surfactants on Crystallization of Nanocrystalline HZSM-5 Zeolite / Jun Fang Wei; Fang Zhu; Xiao Yan Zhang |
Photocatalytic Activity of Titania Nanowire Arrays by Sol-Template Method / Ming Li Li; Qiong Yu; Kun Ming Qian; Yu Song Zhou |
Fabrication Using Focused Ion Beam Processing of Devices Employing Silicon-Based Nanowires Synthesized by Vapor-Liquid-Solid Growth / Hayato Sone; Yousuke Nakamura; Yasuyuki Suda; Sumio Hosaka |
In Situ Growth of Carbon Nanotubes on Carbon Foam for Enhanced Oil Adsorption / Jing Jing Liang; Zong Bin Zhao; Han Hu; Jieshan Qiu |
Synthesis and Characterization of Monodisperse Nanocrystalline HZSM-5 Zeolite |
The Formed Mechanism of Pores in Plasma Sprayed Nanostructured Al2O3/TiO2 Coatings / Wei Qin Wu; Zhen Yi Wei |
Preparation of Nano WO3-Doped Materials and Optical Properties / Bao Jiang Sun |
Preparation and Characterization of CA-PEI Double Modification Water-Based Magnetic Fluid / Xi Sheng He; Hui Qing Peng; Jin Li; Jun Dong |
Synthesis of Bismuth Nanoparticles by a Simple One-Step Solvothermal Reduction Route / Mao Lin Zhang; Chen Feng; Wen Xing Zhang; Xiao Wen Luan; Jian Jiang; Long Feng Li |
Synthesis and Characterization of Poly(Methyl Methacrylate) -Grafted-Cellulose Nanofiber / Chun Wang; Qing Li; Jian Hua Yang; Jun Ya Wada; Takahiko Kawai; Yoshinori Kasai; Hisato Hayashi; Shinichi Kuroda |
Enhanced Photocatalytic Performance of Iodine Doped Bi2WO6 Nanostructures under Visible-Light Irradiation |
Influence of Zinc Content on Anti-Corrosion Performance of Zinc-Rich Coatings / Guo Xin Li; Bing Jie Li; Yi Liang Peng; Wei Tong Yue |
Anti-Corrosion Performance of the Hot-Dip Coating Containing Zn-Al-Mg-Ce / Guo Xin Li; Dong Yang; Yi Liang Peng; Wei Tong Yue |
Role of Aging Precipitates on Mechanical Properties of HNS with Different Nitrogen Content / Zu Rui Zhang; Zhen Ye Zhao; Chun Zhi Li; Zhou Hua Jiang; Hua Bing Li |
Finite Element and Molecular Dynamics Multiscale Framework for TRIP Steel Macro and Micro Material Behavior Investigation / H.Y. Li; X. C. Li; J. H. Li; J. I. Ma; Y. J. Zhang |
Thermodynamics Analysis of Microalloying Technology for Developing High Strength Cold Rolled Structural Steel Sheet / Chun Yu Ma; Chang Wang; Ke Ya Shen; Jun Ping Yuan |
Intermediate-Temperature Oxidation of Fe-Cr-Ni-Mo Stainless Maraging Steel in Air / Fan Yan Meng; Teng Fei Su; Jia Dong Guan; Jian An; Xiao Xia Lv |
Investigations on the Fatigue Property of the High-Strength and Toughness 211Z Casting Aluminium Alloy / Xiao Min Zhang; Jian Mao; Yun Che; Zhong Ke Zhang |
Critical Carbon Concentration and Excessively High Bath Temperature for Smelting Ferrochromium in the Argon-Oxygen Furnace / Ming Rong Han; Long Qiang Huang; Bi Jia |
The Influence of Gd on AM60B Magnesium Alloys' Structures / Jun Feng |
Study on Corrosion Resistance of Carbon Steel/Stainless Steel Composite Pipe / Shu Yun Gou; Yu He Li |
Preparation of Ti3Al Based Alloy Expansion Part for Nozzle by Powder Metallurgy / Ze Bao Lang; Zhong Wei Yin; Jin Liang Shi; Feng Zhao |
Water Modeling Study on Removal of Inclusions in RH Degasser / Chun Jie Yang; Fu Ping Tang; Tao He |
Effects of Two-Stage Solution Heat Treatments on Microstructures and Properties of Cu-Cr-Zr Alloy / Hao Feng Xie; Lijun Peng; Zeng Hui Wang; Xu Jun Mi |
Thermodynamic Calculation of the Precipitate in Cu-Ni-Si-Co Alloys and Experimental Investigation / Jian Wei Wang; Xiang Peng Xiao; Guo Jie Huang |
Establishment of Flow Stress Model of EW75 Alloy / Ming Long Ma; Kui Zhang |
Applying Research on Creep Constitutive Model of No.35 Steel Based on BC-BPNN / Xiang Hua Peng; Jie Li; Ya Feng Jiang; Min Yu |
Investigation on Mechanical Properties of 6H-SiC Crystal / Min Jin; Jia Yue Xu; Yao Qing Chu; Yong Zheng Fang; Hui Shen; Guo Jian Jiang; Zhan Yong Wang |
Research on Optical Properties of Ga1-xAlxN with Different Al Component / Ming Zhu Yang; Jing Guo; Mei Shan Wang |
Porosities and Fatigue Property of Two A356 Cast Aluminum Alloy / Yuan Bin Zhang; Cheng Xin Teng; Tong Guang Zhai |
Finite Element Simulation of Aluminum ECAP Material Flow / Jian Hui Li; Zu Jian Yu; Da Zhi Xiao; Li Ping Zhang |
Perpendicular Magnetic Anisotropy in Fe/MgO Multilayer Film Measured by Magnetic Compton Scattering / Tadashi Kato; Kosuke Suzuki; Shouta Takubo; Yoshiya Homma; Masayoshi Itou; Yoshiharu Sakurai; Hiroshi Sakurai |
Microstructure and Mechanical Properties of 40CrNiMo7 Steel after High Current Pulsed Electron Beam Treatment / Hui Hui Wang; Sheng Zhi Hao |
Research on Microstructure Evolution Laws of Ultrafine Grained Metastable Automobile Steel / Ji Guang Li; Hai Liang Huang; Shang Wu Zeng; Jia Li Cao; Tie Jun Wang |
Effects of Different Alloy Composition on Magnetic Properties of Non-Oriented Electrical Steel / Chang Gui Pei; Pei Kang Bai; Zhang Xia Guo |
Effects of Different Alloy Composition on Phase Transformation of Non-Oriented Electrical Steel |
Research on Thermo Effects of Silver Modified by High-Intensity Pulsed Ion Beam / Di Wu |
Study on the Structure and Properties of the Low Melting Point of Nylon 6 Modified by Organic Montmorillonite / Min Zhang; Sheng Jun Lu; Jie Yu; En Hui Xu; Min He; Dian Xin Liu |
Studies on the Tensile Properties and Flow Performance of the Different Molecular-Weight Polycarbonate / Hong Ying Gong; Yun Long Fu; Xiao Bin Su; Hui Xiao Li; Si Fan Wang |
Study on Adhesion Properties of Poly (sodium acrylate)-Polyvinyl Alcohol Super Absorbent Resin / Zhi Hong Du; Hong Jun Huang; Hong Jing Wan; Lei Jiang; Guo Shun Wan |
Study the Wet-Absorb and Fast-Dry Properties of the Coolplus Fiber/Cotton Compound Fabrics / Guo Ping Xu; Xin Hao Luo; Hai Bin Qiu; Yan Jun Zhu |
Study of the Mechanical Properties and Releasing Anion Capacity of Anionic Functional PET Fiber / Ai Hui Wu; Guo Ping Xu; Guang Hai Luo; Xin Hao Luo |
Lifetime Prediction of Nitrile Butadiene Rubber Used for O-Ring Sealing / Tao Yu; Hui Zhang; Jiang Feng Sheng; Yi Xi Liu |
Study on Magnetic Polymer ICF Target Prepared by the Electroless Plating / Shao Bo Cui; Feng Wei He; Zhong Yuan Lu |
Preparation of Magnetic Polymer ICF Pellet by the Electroless Plating / Shao Bo Cui; Feng Wei He |
Experimental Study of Material Thickness Effect on Combustion Characteristic for Molded Polystyrene Board / Miao Zhang; Wen Hua Song; Xing Na Liu; Chang Hai Li; Ji Wang |
Stress Wave in Gelatin from Temporary Cavity / Gen Lin Mo; Zhi Lin Wu |
Identification and Monitoring Strategy of Macrophomina phaseolina from Imported Soybeans / Juan Sun; Shun Sheng Chen; Cui Yu; Cui Yun Yang |
Effects of Bcl-2, Bax and P53 Gene Protein Expressions in Gastric Cancer Tissue on the Apoptosis of Cancer Cells / Lei Zhang; Da Peng Li; Guan Nan Lu |
Correlations of Bcl-2 and Survivin Gene Protein Expressions in Colorectal Cancer / Yue Ma; Hong Sheng Wang |
Effect of 1-MCP and O3 on the Qualities of Dendrobium Officinale Storage / Jian Qing Meng; Hai Jiao Liu; Xi Hong Li; Lan Chen; Lin Xue Du; Jin Shan Luo |
Regenerated Bamboo Fiber from Green Solvent / Tao Cai; Yi Man Wang; Yu Rong Yang; Min Wei; Min Kui Wang |
Anti-Aging Effects of Deoxyschizandrin in D-Galactose-Induced Aging Rats / Xiao Dong Huang; Jian Ying; Yan Chun Wang; Kuang Ren |
Research and Preparation for Nanoemulsion of Macadamia integrifolia Oil / Bing Qing Zhu; Li Jing Lin; Ji Hua Li; Mao Fang Huang; Kang Yi Zhang |
Cardioprotective Effects of Lignanoid against Doxorubicin-Induced Oxidative Stress in Rat / Yan Chun Wang; Kuang Ren; Lin Meng; Hong Yan Fan; Nan Shen |
The Analysis on Composition and Structure of the Eri-Silk / Wen Zhong Wang; Lei Zhao; Li Shan Fan |
Super-Hydrophobic Surface Manufacture on Pyrolytic Carbon via Electrostatic Spinning Method / Ren Xing Li; Ze Wang; San Kuan Liang |
Foamed Buffer Material Made from Fibers of Old Newspaper / Dai Qi Wang; Bin Yan |
Thermal Degradation of Hemp Treated with Guanidine Nitrate / Yong Li Yang |
Synthesis, Characterization and Properties of the IA / SAS Copolymer / Zhen Fa Liu; Hao Lin Fu; Li Hui Zhang; Yan He Zhang; Xuan Liu |
Influence on Red Long-Lasting Phosphorescence due to Different Doping Concentrations of ZnGa2O4:Cr3+ / Rui Xia Zhong; Zi Ran Liu; Qing Qiu; Jian Quan Qi; Xiao Yan Zhang |
Influence on Afterglow Spectra due to Different Phases of Zn3(PO4)2: Mn2+ / Zi Ran Liu; Rui Xia Zhong; Hui Zhao; Xiao Yan Zhang |
The Spectral Properties and Thermal Stability of AlCr-AlCrON Solar Selective Absorber Coating / Ya Nan Li; Xiang Rong Liu; Yin Fang Cui; Jia Qi Liu; Guang Ming Xie; Cong Wang |
Luminescent Properties of LiTaO3:Tm3+, Yb3+ Phosphors Prepared by Ball Milling Method / Xin Ze Wang; Zhong Xin Liu; Hong Jian Gao; Yani Jing; Chang Lin Li; Jing Liu |
Synthesis and Characterization of Luminescent Properties of NaGdF4 Phosphors / Chang Lin Li; Tian Li; Jing Liu; Xin Ze Wang; Hong Jian Gao; Zhong Xin Liu; Wen Zhi Song |
The Mechanisms on the Transmittance and Photo-Catalytic Activity of TiO2 Film Doped with SiO2/PEG / Wen Wen Dou; Guo Wei Huang; Yu Chao Niu; Xiao Li Wang; Xiang Ju Liu |
Theoretical Study on Absorption Properties of InxGa1-xAs with Different in Component / Jing Guo; Ming Zhu Yang; Mei Shan Wang |
On Antireflective Coatings with Stable Hydrophobicity for Solar Tube / Wen Wen Dou; Yu Chao Niu; Xiang Ju Liu; Xiao Li Wang; Yong Xu |
The Temperature Field Caused by Sphere Inclusion in Dielectric Irradiated by Single Pulse Laser / Cai Hua Huang; Xiao Hua Sun; Yi Hua Sun |
The Temperature Field Caused by Sphere Inclusion in Dielectric Irradiated by Multi-Pulse Laser |
Effects of Alkali Metal Content and Sintering Temperature on the Structure and Electrical Properties of (Na0.52K0.48) 0.94+xLi0.06-xNb0.94Sb0.06O3 Lead-Free Piezoelectric Ceramics / Hai Tao Li; Xiao Bo Hong; Hong Qiong Huang; Jin Feng Gong; Zhi Yuan Cheng; Han Guo |
Synthesis of Light Olefins from CO2 Hydrogenation on Fe/ZSM-5 Catalyst / Lin Yang; Jing Li; Jian Xin Cao |
The Synthesis of Cadmium Sulfide and Cadmium Selenide Nanostructures / Ya Hui Zhang; Xi Cheng; Qing Wang |
Removal of Carbonyl Compounds in Diesel Exhaust Gas by Direct Non-Thermal Plasma / Fei Jiang; Yi Xi Cai; Wen He Han; Xiao Hua Li; Miao Dong; Ya Yun Chen |
Research of the Reactivity Photoacoustic Characteristics of PETN and HNS Induced by Laser / Hui E Wang; Wei Zhang; Rui Qi Shen; Ying Hua Ye; Li Zhi Wu |
The Efficient Thermal Management of Proton Exchange Membrane Fuel Cells / Shi Mei Sun; Yao Shi; Wei Liu |
Effect of Temperature on Decomposition of Magnesium Bicarbonate / Yan Li; Xiao Jun Wang; Bin Wu; Hong Jian Tang; Yu Yu Xie |
The Phase Change Study of High Titanium Slag during Heat Treatment / Shu Quan Wan; Chun Hai Liu; De Jun Lan; Hong Bo Han; Hai Jun Hou |
Synthesis and Characterization of Thermoplastic Poly (ether-imide) Elastormer Based on Di-(4-Aminopheny)Methane-Pyromellitimide Unit / Jiao Jiao Shang; Ming Lei; Shao Jian Lin; Jian Wu Lan; Xia Huang; Wen He |
An Electrolyte Additive for Use in High-Voltage Lithium-Ion Batteries / Ai Fang Liu |
The Influence of Technological Conditions on Cell Density and Cell Morphology of PPESK Microporous Material / Min Jie Qu; Tian Qi Li; Lai Jiu Zheng; Shi Yang Zhu; Ling Ling He; Jing Guo; Yu Mei Gong; Bing Du |
Progress of Purification and Application of Barite / Teng Huang; Shao Min Lei; En Wen Wang; Guang Ming Bao |
A Research on an Inner Core Replaceable Alkaline Batteries / Dan Yang Qiao; Xiao Qing Lin; Le Huang Lin; Wen Chuan Lin |
Preparation and Characterization of Foaming Poly (phenylene ether ketone) PPEK by Using Supercritical Carbon Dioxide / Min Jie Qu; Shi Yang Zhu; Lai Jiu Zheng; Tian Qi Li; Ling Ling He; Jing Guo; Jian Zhao; Bing Du |
Preparation and Characterization of Phloroglucinol-Resorcinol-Formaldehyde Carbon Aerogels / Xuan Liu; Zhen Fa Liu; Hao Lin Fu; Rui He; Li Hui Zhang |
Synthesis and Polymerization Kinetics of PMMA in Imidazolium Ionic Liquids / Pei Wang; Yuan Liu; Wen Su; Lian Liu |
Effect of Ce0.8Sm0.2O1.9 Interlayer on the Electrochemical Performance of LaBaCo2O5+#948; Cathode for IT-SOFCs / Rui Feng Li; Shou Cheng He; Lu Cun Guo |
Atmospheric Pressure Non-Equilibrium Plasma Deposition with Retention of Functional Group / Jun Yan; Yuki Kondo; Xiao Yi Qian; Xiao Meng Fei; Katsuhiko Hosoi; Tamio Mori; Shinichi Kuroda |
Effects of Sintering Temperatures on the Solid-Phase Synthesis of Lithium Vanadium Phosphate for Lithium-Ion Cathode Materials / Dao Wu Shuang Shi; Wei Wang; Zheng Zhang; Xing Quan Liu |
Adsorption of Chloride Anion by Calcined Mg-Al-Fe Layered Double Hydroxides in Wastewater / Wan You Zhang; Ying Liu; Li Juan Xi |
Preparation of FePO4*2H2O with Flower-like Microstructure by a Facile Hydrothermal Synthesis Method / Bing Jiang; Wen Qin Wang; Yu Song Liu; Zhi Meng Guo |
Study on the Preparing of Nanowhite Carbon Black by Silica Fume / Xin Zhi; Zhan Cheng Guo |
Preparation of F, Cl and Nitrogen Doped TiO2 and their Photocatalytic Properties Research / Chen Tao Hou; Fei Lv |
Review of Germanium Recovery Technologies from Coal / Dong Xu; Yi Wei Chen; Hua Guo; Han Qiang Liu; Ying Dong Xue; Wen Fu Zhang; Yu Cai Sun |
Thermal Degradation of Epoxy Resins Containing Aluminum Compounds |
Effect of Liquefying Agents Mixed with Lower Alcohols and Reaction Temperature on the Microwave Driven Liquefaction of Wood / Zhe Wang; Zhen An |
Preparation of Chitosan and Epichlorohydrin Cross-Linked Adsorbents and Adsorption Property of Dyes / Chun Guang Li; Fan Wang; Wei Gong Peng; Yan Hong He |
The Application of Differential Scanning Calorimetry to Thermal Analysis for Energetic Materials / Yong Kang Chen; Ming Hua Chen; Tao Zhang; Xiao Le Wu |
Influence of Cu Doping on the Thermoelectric Properties of Bi1.5Pb0.5Sr1.8La0.2Co2Oy / Qing Lin He; Zhan Ying Guo; Xing Hu; Hong Zhang Song |
Molecular Dynamics Simulations of the Effect of Carbon Concentration on Silicon Carbide Crystal Growth / Qiu Fa Hu; Nai Gen Zhou; Tao Hong; Lan Luo; Ke Li; Lang Zhou |
Application of Dividing Wall Column in Industrial Naphthalene Distillation: A Simulation Study / Er Qiang Wang |
A Evaluation on Pulverized Coal Combustion Properties Using a Thermogravimetric Analyze Method / Yan Hong Gao; Ling Tao Bian |
The Adaptability Study for Developing Tight Gas Reservoirs Using Horizontal Wells / Shu Qing Peng; Wan Chun Zhao |
Reservoir Architecture Analysis of 8th Member of Lower Shihezi Formation in Sulige Gas-Field / Hai Jiao Lu; Tai Wu Li; Cheng Wu Xu; Ji Ping Wang |
The Study of Daqing Oilfield Class II Reservoirs Pore Throat Ratio Using Conventional Pressure Mercury Method / Wen Guo Ma; Peng Wang; Ying Wang |
Simulation Experimental Study on the Permeability of Coal Rock in Deep Mine / Gang Zhou; Yan Bin Yu; Wei Min Cheng |
The Performance Evaluation of Potassium Drilling Fluid System / Qing Wang Liu; Shou Song Zhang; Zhen Zhong Fan; Ji Gang Wang; Yan Min Lou |
Processing on Red Mud by Integrated Dealkalized Sintering with Magnetization / Yong Guang Fang; Yu Qian |
An Experimental Study on Fracture Conductivity Influenced by Sulfur Deposition / Ying Kun Fu; Zhi Ping Li; Feng Peng Lai; Bao Song Yang; Chao Meng |
Practice of Fuzzy-Ball Drilling Fluid Technology in Qinping CBM Well 12-11-3H with Six Branch Holes / Jin Bang Cui; Ji Hong Zhang; Qing Zhong Zhu; Bi Wu Chen |
The Performance Evaluation of Solid Free Completion Fluid |
The Effect of Gas Distributor Settings on the Separation Characteristics of Air-Dense Medium Fluidized Bed / Ling Yue Li; A Tao Dou; Xue Shuai Zhu; Da Hu Li; Lu Bin Wei |
Experimental Study on the Crushing Process of Granular Layer / Jun Cui Zhang; Li Cheng Wang |
Dehydration and Upgrading of Lignite with Microwave / Fan Wen Xin; Zhi Qiang Xu; Ya Nan Tu; Wei Yang; Xiang Yu Han; Peng Fei Geng |
Steam Injection Performance of Horizontal Wells Completed with Slotted Liners / Hui Juan Chen; Ming Zhong Li; Yan Yu Zhang; Wei Wei Li |
Domestic and International Present Status and Utilization of Hafnium Resource / Yu Bo; Xiao Liu; Yun Gang Li; Zong Ying Cai |
Numerical Simulation of the Effect of Cathode Materials on the Displacement in a 350 KA Aluminum Reduction Cell / Wei Wang; Shu Chao Wang; Pan Fei Bao |
Microstructure and Mechanical Property Analysis of the Metal Part by SLM / Qun Qin; Guang Xia Chen |
Experimental Investigation on Surface Topography for PTMCs during High Speed Grinding / Jian He; Wen Feng Ding; Qing Miao; Biao Zhao; Zhi Wu Liu; Yang Min Liang |
The Structure and Mechanical Properties of Me/MeN/TiAlN Trilaminar Coatings Deposited by a Hybrid PVD Coating Technique / Guang Xian; Hai Bo Zhao; Hong Yuan Fan; Hao Du |
The Protective Effect of the Intumescent Coating on the Fire Resistance Performance of Cable / Ji Wang; Wen Hua Song; Zhong Jun Shu; Miao Zhang |
Effect of Grain Growth Inhibitor on the Wear of Ultrafine Cemented Carbide Cutting Inserts / Jian Bing Cheng; Si Qin Pang; Xi Bin Wang; Qi Xun Yu |
Effect of Low-Voltage Pulsed Magnetic Field on Solidified Structure of Superalloy K4169 / Xiao Hua Xie; Quan Zhou; Cheng Bo Xiao; Xin Tang |
Evaluation for the Light Transmission Property of Solar Glass / Yan Gang Han; Hong Bo Chen |
A New Stretch-Forming Process Based on Loading at Discrete Points and its Numerical Investigation / Zhong Yi Cai; Mi Wang; Chao Jie Che |
Modeling and Prediction Research on End Mills Wear in Micro Turn-Milling Process / Xiao Yang Su; Zhi Jing Zhang; Xin Jin; Yong Jun Deng |
Calculation of Moisture Content and Drying Rate during Microwave Drying / Samad Khani Moghanaki; Behnam Khoshandam; Mohammad Hosein Mirhaj |
The Experimental Study of Organizational Structure of Welded Joint and Combining Performance of Laser Welding of Vacuum Glass / Wei Liu; Rui Hong Zhang; Hong Miao |
Effect of RF Negative Bias on the Structure and Performance of Diamond-Like Carbon Films in ECR Plasma / Li Jun Sang; Qiang Chen; Zhong Wei Liu; Zheng Duo Wang |
Precision Measurement for Drill Helical Flute Curve / Yan Ping Peng; Bing Bai; Qiu Hua Sun; Wei Zhang; Feng Bao He |
Determination of Elements in Carbon Fiber Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) / Ting Zhao; Ming Qiang Zhou; Wei Li Liu; Wei Huang; Jun Zhi He; Hai Tao Chi; Xia Gao |
Failure Analysis and Remanufacturing of Construction Machinery Shafts by HVOF Technique / Ning Ma; Huan Tao Wu; Fu Xing Ye; Guo Sheng Zhang |
Model Adaptive Learning in Process Control of Strip Cold Rolling / Jin Lan Bai; Xiang Li; Jun Sheng Wang |
Effect of Laser Fluence on the Growth of Mo Films Prepared by a Pulsed Laser Deposition Method / Jie Hong Lei |
Welding Technology Research for the Train Bogie / Gang Wang; Zhi Gang Chen |
Temperature Distribution Analysis of TIG Welding Process of Thin-Walled Stainless Steel and Red Copper / Han Wu Liu; Lei Huang; Wen Zai Yu; Rui Bin Ma |
Investigating the Use of Nanoscale Bilayers Assembly on Stainless Steel Plate for Surface Hydrophobic Modification and Condensation / Shen Chun Wu; Dawn Wang; Sin Jie Lin; Chen Yu Chung; Yau Ming Chen |
Experimental Study on Friction and Wear Behaviors of Carbon Rubbing against Copper Material under Electric Current / Tao Ding; Wen Jing Xuan; Yu Mei Li; Shu Fen Xiao |
A Study of the Hot Cutting Technology to EPS Architectural Model / Xiao Jun Wu; Fu Ru Xu; Ji Gang Shao |
Research on Powder Stream of Coaxial Powder Feeding in Laser Manufacturing Technology / Heng Quan; Yun Shan Wang; Li Feng Liu; Shao Jun Liu; Qing Ruo Meng |
Study on Processing Technique in Engineering Tests of Mg-7.1Gd-4.6Y-1.3Nd-0.5Zr Alloy / Yong Jun Li; Kui Zhang |
Research on Coating Techniques of Locomotive Spring / Ya Xie; Cheng Sun |
Forward Slip and Backward Slip in Radial Ring Rolling Process / Yan Liu; Qiang Wang; Dong Mei Cai |
Microstructure and Microhardness Changes of 30CrMnSiA Steel Modified Surface Layers by Electrolyte-Plasma Processing / Mazhyn Skakov; Erlan Batyrbekov; Laila Zhurerova; Michael Scheffler |
Research on Modeling and Simulation of Linearity Controlling in Gun Drill Machining / Shu Qin Chen; Yao Ming Li; Pei Kangc Bai; Xing Quan Shen |
Selective Laser Melting Bone-Compatible Pure Titanium Porous Structure / Zi Fu Li; Chun Yu Zhang; Liu Ju Qi; Xue Tong Sun |
The Preparation and Application of Special Performance Ornamental Alloy Coating on Plastic Substrate / Nai Jun Li; Nai Wei Li; Mei Mei Li; Ding Yi |
Arrangement Characteristics and Wear Distribution of Wire Rope in Parallel Grooved Multi-Layer Winding / Zhi Hui Hu; Yong Hu; Ji Quan Hu |
Effects of Annealing and Different Substrate Materials on Ohmic Contact Property of IGZO Films / Ji Feng Shi |
Detecting Cold Weld Defects in HDPE Piping Thermal Fusion Welds Based on Microwave Technique / Jin Ping Pan; Xin Wei Zhu; Lian Jiang Tan |
Analysis of Low Molecular Weight Components in Disposable Food Contact Materials / Hai Tao Chi; Wei Li Liu; Guang Hui Hu; Xia Gao; Ting Zhao; Ming Qiang Zhou |
Preparation and Properties of Water-Borne Inorganic Zinc-Rich Coating in Hydraulic Engineering Metal Structures / Lei Liu; Liang Chen; Zai Qin Wang; Zhen Li; Shan Feng Wang; Hui Li |
Analysis of Interaction between HTHP Completion Packer's Slip and the Casing Wall / Mao Jia Cai; Yin Ping Cao; Xing Wang; Yi Hua Dou |
Methodology of the Experiment for Determination of Parameter Ra for the Methods of Finishing Machining / Rastislav Bartos; AugustÃn Görög |
Resistance Spot Welding of Advanced High Strength TWIP Steels / Pasquale Russo Spena; Manuela De Maddis; Franco Lombardi; Fabio D'Aiuto |
Mathematical Model for Heat Transfer Simulation of Rotary Alumina Kiln / Xiao Yan Yang; You Gang Xiao; Xian Ming Lei |
Fabrication of Functionally Gradient Ultrafine-Grained WC-Co Composites / Yi Gao Yuan; Jian Jun Ding; Yan Kun Wang; Wei Quan Sun |
Preparation and Dielectric Properties of La Doped Bi2Al4O9 / Xiao Yan Zhang; Xi Wei Qi; Jun Fang Wei; Wen Shu Hu; Gui Fang Sun; Rui Xia Zhong; Huan Huan Chen |
Behaviors of Immersion Flow in Micro-Gap with Moving Boundary / Hui Chen; Heng Du |
Improvement for Bearing Ring Grinding Process Based on Six Sigma Methods / Ming Yue Guo; Hong Liang Lou |
Energy Loss on High-Temperature Plasma Processing Waste Printed Circuit Boards / Song Bai Wang; Chang Ming Cheng; Wei Lan; Ren Wu Zhou; Xian Hui Zhang; Dong Ping Liu; Size Yang |
Acoustic Emission Characteristics of Sericite Schist Coarse Aggregates under Consolidated Undrained Triaxial Tests / Lan Qiang Yang; Shang Lin Qin; Hui Gao; Shan Xiong Chen |
Research on Landscape Limestone Damage and Deformation under Uniaxial Compression Based on Acoustic Emission / Yong Qin Xiao; Yi Ping Wan; Bao Xian Liu |
Study on Friction and Wear Properties of Water Lubricated Rubber Bearing / Ming Yi Liao; Bo Xin; Qi Biao Li |
ECM Parameters Modeling and Optimization Using WSGA / T.M. Chenthil Jegan; D. Ravindran; M. Dev Anand |
Numerical Simulation on Upsetting Process of Large Forgings / Jing Meng; Qiang Wang; Dong Mei Cai |
Molecular Dynamics Simulations on Melting of Aluminum / Ji Feng Li; Xiao Ping Zhao; Jian Liu |
Microstructure and Tribological Properties of Stellite21 Coating by Electro-Spark Deposition / Qi Feng Jing; Ye Fa Tan; Hui Yong Ji; Xiao Long Wang; Li Gao; Wei Zhao |
Dynamic Response Analysis of Butt Joint of HTS-A Steel Considering Welding Residual Stresses / Wei Shen; Ren Jun Yan; Lin Xu; Kai Qin; Xin Yu Zhang; Li Ming Geng |
Performance Control Research of Oil Distribution Plate Parts by Laser Direct Rapid Forming Based on the Ultrasonic Vibration / Jian Bin Wang; Qing Sheng Zeng |
A New Method Designed Crimping Technical Parameter Using Response Surface Methodology / Li Feng Fan; Ying Gao; Jia Xin Yan; Jian Bin Yun |
Experiments of Rock Cutting with Nano-Cemented Carbide / Ji Cai Kuai |
Study on a New Forming Method of the Honeycomb Semi-Cell Structures / Lei Qin; Hai Liang Zhang; Chang Jie Luo |
Optimization Study on the Tooth Profile of Gear Shaping Roller of Honeycomb Semi-Cell Structures / Lei Qin; Yan Ting Ma; Chang Jie Luo |
Effects of Air Bending Parameters on Spingback Using Finite Element Analysis / Xie Li |
Utilization of Phosphorus Slag and Fly Ash for the Preparation of Ready-Mixed Mortar / Xiu Wei Liu; Lin Yang; Bin Zhang |
Application of Environmental Protection and Safety Bituminous Mixture in Tunnel / Xi Rong Wu; Nan Xiang Zhen; Zhuo Hong Cong; Guo Qing Sun |
The Effects of Temperature on the Stiffness Modulus of Dense Graded Asphalt Mixtures / Abdullahi Ali Mohamed; Kwong Yiing Ting; Wee Kang Choong; Boon Hoe Goh |
Compactability Analysis of Soil-Rock Mixture / Lin Ping Yu; Zhi Yun Wang |
Elastic Modulus of Concrete Cast with Recycled Aggregates / Wee Kang Choong; Lau Teck Leong; Choon Seng Sin; Boon Hoe Goh |
Effects of Recycled Aggregates on Water-Cement Ratio for Concrete / Wee Kang Choong; Lau Teck Leong; Choon Seng Sin; Abdullahi Ali Mohamed |
Using Red Mud Manufacturing Building Glass-Ceramics / Chang Sheng Hu; Xi Wang |
Effect of Dosage and Modulus of Water Glass on AC Impedance Properties of Alkali-Activated Slag Cement Mortar / Fu Qiang He; Xiao Peng An |
Modification Research on the Water-Resistance of Magnesium Oxychloride Cement / Zi Yao Yuan; Xing Long Liu; Yong Feng Jia; Peng Liu; Ming Chun Li |
Experimental Research on Peridotite Concrete for Neutron Shielding / Jin Jun Wang; Guo Feng Li; De Chuan Meng |
Study on Carbonization Test of Manufactured Sand Concrete / Da Zhen Xu; Gu Hua Li; Zhuang Zhi Liao; Hai Wei Yan |
Applicable Fine Stream Sediments from Upper Chi River Produced Fired Clay Bricks / Sarunya Promkotra |
Synthesis and Property of Nano-SiO2/Silicone-Acrylate Emulsion Composite Coatings for Concrete Surface Protection / Ling Min Liao; Hui Liang; Liang Chen; Zai Qin Wang; Shan Feng Wang |
Study about Characteristics of Cement Paste on Fractal Theory / Tian Yang Zhai |
Analysis of Displacement Field of Asphalt Mixture in Uniaxial Compression Test / Jia Xiong Xu |
Research on Failure Criterion of Concrete under Multi-Axial Stress / Guo Jun Liu; Zhao Lan Wei |
Research on Fatigue Performance of Modified Asphalt Mixture in Intermediate Course of Pavement / Zhao Hui Sun; Xiao Hong Wang; Guang Qiang Zhu; Pei Dong Ou; Jing Ma |
Research on Concrete Strength Theory Based on Strain Space |
Study Strength of Recycled Concrete Mix Design / Xin Hua Zhang; Sai Tian; Huai Ru Dai; Wei Lin; Zhi Chun Yao; Yun Bo Wang; Qiao Yu Kong; Jia Wen Zhu |
Deterioration of Cement Pastes Containing Limestone Powder with Different Fineness Exposed to Sulfate Environment at Low Temperature / Feng Chen Zhang; Ruo Yu Tang; Yun Zhao |
Analysis about the Properties Impact of the Recycled Aggregate which were Caused by Different Produced Methods and Original Concrete / Mu Xiang Dai; Xiao E Zhu; Xu Jun Chen |
Effect of Polycarboxylicacid Plasticizer on Characteristics of #945;-Calcium Sulfate Hemihydrate / Xian Feng Liu; Jia Hui Peng; Jian Xin Zhang; Ming Zheng Chen; Qian Dong |
Production Quality Control of Moderate Heat Portland Cement and Analysis of Application Effect in Roller Compacted Concrete / Yong Min Yang; Jie Long Cai; Ze Peng Chen |
Effect of Age on Strength of Unfired Soil Lime Bricks Containing Non Uniform Coconut Fibers / Purnomo Heru; R.G. Raka Basmara Putra; R. Mochammad Syaifulloh; Iwan Sulistyawan |
Effect of Copper Slag on Properties and Structure of Cement and Concrete / Jun Wei Song |
Chaotic Characteristic Analysis of Concrete Fracture System Based on Lyapunov Exponent Stability Criterion |
Dynamic Modulus Characteristic of Large Stone Permeable Asphalt Mixtures / Jin Cheng Wei; Jin Li |
Experimental Research on the Flexural Failure Properties of Green High Performance Fiber Reinforced Cementitious Composites (GHPFRCC) / Xiu Ling Li; Min Luo; Juan Wang |
Dynamic Analysis of Large Dams in Frequency-Domain Based on Fourier SEM / Ping Tan; Nan Sheng Li |
Establishing and Checking the Temperature and Humidity Coupled Model about Asphalt Pavement Structure / Bo Wang |
A Review of Durability Research of Concrete Bridge / Jing Mei Bian; Quan Bai; Yu Mei Kang; Jun Zhang |
Study on Green Construction Evaluation Based on the Fuzzy Matter-Element / Bi Lin Shao; Min Min Yang; Bo Qiang Liu |
LS-SVM-Markov Model for Dam Deformation Prediction / Yan Zuo Jiang; He Zhi Liu; Jing Yang Liu |
Study on Probability Distribution of Ship-Bridge Collision Force Formula / Jun Hu Shao; Shuai Song |
Earthquake Damage Investigation and Analysis of Masonry Structure in Yuxi Village - The Macroscopic Epicenter of Ms 7.0 Lushan Earthquake / Pei Lei Yan; Bai Tao Sun; Ming Zhen Wang |
Research on the Formula of Polyaspartic Ester Polyurea Concrete Coating and its Application / Jing Feng; Ling Min Liao; Liang Chen; Cheng Jing Xiao; Shan Feng Wang; Hui Li |
Axial Compression Bearing Capacity Calculation of Hoop Reinforcement Concrete Column / Jian Tang; Lang Wu; Na Xiong |
Study on the Scope of Application of Cement Deep Mixing Pile to Consolidate Soft Soils / Xin Hong Guo; Guang De Wu; Xin Huan Guo |
The Case Analysis of Building Collapse during the Decoration Process / Fang Yang; Sha Jiang; Yang Fang Zhou |
Exquisite Representation in Peter Zumthor's Works / Jiao Jiao Jia; Song Fu Liu |
Peter Zumthor Ideas of Architectural Creation / Jiao Jiao Jia; Song Fu Liu; Xiao Juan He |
Study on Elastic-Plastic Damage Constitutive Model of Frozen Soil Based on Energy Dissipation Theory / Zhi Min Li; Tao Liu; Zhi Li Cui |
Crack Detection and Analysis of Long-Span Continuous Rigid Frame Bridges / Kang Liu; Bo Wu; Yuan Yuan |
Experimental Research on Compaction Standard of Subgrade for Low Liquid Limit Silt in Shanxi Area / Xi Rong Wu; Jun Ming Shen |
The Construction of the SGW-Based Bar-Beam Elements / Yan Xin Liu; Han Xiang Wang; Qian Qian Fu; Xiang Xiang Yang; Guo Dong Ding |
Analysis of the Plastic Extension of Parking Cracks on Casing after Testing / Long Cang Huang; Shao Kai Tong; Yin Ping Cao; Yi Hua Dou |
Fundamental Study of the Potential Application of Steel Fiber Reinforced Concrete to Enhance the Impact Resistance of Nuclear Power Plant Structures / Hyun Woo Cho; Jae Heum Moon; Jang Hwa Lee |
Dynamic Simulation of Ballastless Railway Track System with Local Invalid Sleepers / Huai Liang Zhu; Ying Dong Fang; Li Feng Yu |
A Study of New Type of Earthquake-Resistant and Crack-Resistant Block / Jun Jie Zhang; Nuo Xu; Mei Hui Zhong |
Analysis of Shape Control Factors for the Overall Optimization Design of High-Rise Frame Shear Wall Structure / Ting Yu Mei; Lang Wu |
Key Points Analysis for Seismic Design of Super High-Rise Building |
Analysis of the Mechanical Properties of Cement Silo Structure / Hong Gan; Yi Zhen Yang |
The Time Domain Simulation of Non-Stationary Road Roughness / Hao Wang; Xiao Mei Shi |
Geometry Optimization and Engineering Applications of Transmission Tower Foundation in the Slope / Bin Peng; Xing Yun Wang; Yu Wang; He Huang |
A Numerical Study of the Impact of Tunnel Depth on Surface Displacement in Shield Tunnel Construction / Hui Ting Zhan; Hong Yuan; Jia Yu Wu; Yu Sen Yuan |
The Application of the Creep Model in the High-Speed Railway Subgrade Settlement Prediction Techniques / Jian Li; Shan Xiong Chen; Fei Yu |
Study on Fatigue Features of Box-Shaped Cable-Girder Anchorage for Cable-Stayed Bridges with Steel Box Girders by Model Test / Qing Hua Zhang; Chuang Cui; Qiao Li; Bing Bai |
Simulation for Wind Pressure of Pedestrian Bridge Induced by Main Line Train / Li Jiang; Jia Liu; Shu Jin Li; Bai Feng Ji; You Fu Du |
Research and Application of Building Enclosing Structure Used in Equipment Noise Control / Nan Xu |
The Application of Fiber Cement Slurry Used to Prevent and Block Leak / Jian Jun Guo; Shou Song Zhang; Zhen Zhong Fan; Qing Wang Liu; Ji Gang Wang |
Effects of Stacking Sequence on the Dynamic Characteristics of Hybrid Sandwich Composites Plates / Xiao Fei Ma; Fu Lei Huo; Guo Li Zhang |
Analysis of the Influence of Anisotropy on Seepage Field / Jian Bo She; Yong Quan Tang; Yong Chen |
Numerical Simulation for Uplift Bearing Capacity and Affecting Factors of the Digging Piles in Slope Ground / Xing Yun Wang; Bin Peng; Xiao Chao Tang; Lian Fan |
Study on the Friction Transfer Rule of Piles in the Slope under the Vertical Load |
Experimental Research on Shrinkage Properties of Cement Stabilized Iron Tailings Sand Mixture / Bao Feng Pan; Hong Yu Shi; Chang Hong Zhou |
The Practical Probability Analysis Methods for Stability of Landslide / Qiang Hui Song; X. L. Li; Y. Y. Li; Y. Wu |
Study on Damage Characteristics of Reinforced Concrete Structure for Internal Explosion / Ya Dong Yang; Xiang Dong Li; Xiao Ming Wang |
An Inductive Method for Soil Mechanics / Hong Fei Qin; Yan Ke Liu |
Stability Analysis of Jointed Rock Slope Using Shear Strength Reduction Approach / Li Juan Cao; Yu Ning Liu; Zi Chang Shangguan |
Submarine Slope Stability Evaluation Based on Strength Reduction Finite Element Method / Jin Feng Cao; Xiao Jie Jin; Jia Gang Li; Guang Hai Hu |
Seepage Numerical Simulation Methods of Hard Fractured Rock Mass / Gang Lei |
Study on the Effects of Microwave Pretreatment on the Fire Retardant Permeability of Fast-Growing Wood / Jian Zhang; Shao Fei Yuan; Kui Hong Wang; Qin Li |
The Effect of Alkali Treatment on Wood Crystalline Structure and Micro-Structural Model / Zhen Hua Xue; Yun Huan Xie; Hong Zhi Zhu |
Calibration of SWAN Model for Wave Simulation in Bohai Sea / Xiang Cui Lv; Dao Sheng Wang; De Kui Yuan; Jian Hua Tao |
Numerical Simulation Analysis on Interaction among Underground Structure, Shear Connectors and Retaining Piles / Xiao Yu; Ming Xing Luo |
Qualitative and Quantitative Integrity Evaluation of HPHT Gas well Containing Sour Gas / Yun Wang; Wen Kui Li; Jun Li |
Research on Coagulation/Sedimentation Process for Fluoride Removal in Simulation Wastewater / Lin Zhi Zhai; Yi Han Sun; Teng Wang; Cheng He |
Establishment of Ecological Security Pattern for Suzhou National New & Hi-Tech Industrial Development Zone / Yong Hong Li; Bao Xiang; Yu Hu |
Exploring the Relationship between Industrial Economic Growth and Environmental Pollution - An Empirical Analysis Based on Cointegration and Granger Causality Test / Chao Wang; Jiang Liu; Li Huang; Wei Li |
Development of Rainwater Purification and Reclaimed Water Treatment Systems Using a High-Efficiency Air-Cooled Ozone Generator / Sang An Ha; In Soo Kim; Kwang Suk Son; Jei Pil Wang |
Derivation of Optimum Treatment Conditions per Heavy Metal Contamination for Electrical Membrane and Convergent Process Apparatus in Electromagnetic Field / Sang An Ha; Gil Soo Han; Byong Ho Jung; Kwon Hoo Kim; Jei Pil Wang |
Numerical Modeling of Oil Spill with Tidal and Wind-Driven Coupled Model in Bohai Bay / Ming Chang Li; Guang Yu Zhang; Qi Si; Shu Xiu Liang; Zhao Chen Sun |
Study on Spatial Characteristic in Micro Level of Rural-Urban Construction Land Expansion Based on the GWR Model - A Case Study in Tonglu County of Zhejiang Province / Dong Cai; Yan Ming Chen |
A Novel Integrated Rainfall-Runoff Model Based on TOPMODEL and Artificial Neural Network / Shuang Liu; Jing Wen Xu; Jun Fang Zhao; Yong Li |
Comparative Study on the Drying Process and Fractal Dimension of Sewage Sledge: Microwave and Air-Blast / Tian Yang Zhai; Lin Fang |
Adsorption of Fluoride Ions from Drinking Water Using Glass Derived Porous Hydroxyapatite Scaffolds / Dong Lin Gu; Wen Liang |
Applicability of Modified TOPMODEL in the Arid Zone and the Humid Zone / Shuang Liu; Jing Wen Xu; Jun Fang Zhao; Peng Hou |
Geochemical Speciation Associated to Brine and Groundwater / Sarunya Promkotra; Tawiwan Kangsadan |
Stress Simulation Analysis of Bundling Wire Based on ANSYS / Ming Dai; Li Feng Diao; Xia Zhang; Liang Bin Chen |
Thermodynamics Coupling Analysis of Grid-Controlled Electron Gun / Fang Fang Song; Sha Xu; Yun Fei En |
Exact Solution of Stress and Radial Displacement of Elastic Tapered Interference Fit / Ling Xiong; Peng Shang; You Lin Xu |
Pressurizer Modeling: Using Different Thermodynamic Models and Comparing Results with RELAP Code Results / Samad Khani Moghanaki; Mohammad Rahgoshay |
Studies on Several Problems of Rotary Impact / Lin Wang |
Internal Force Evaluation of Non-Uniform Beam in Portal Frame / Wen Wen Jia; Deng Feng Wang |
Research on the Motion Mechanism of Offset Press's Ink Roller / Hong Yan Chu; Jun Tao Zhao; Li Gang Cai |
Study on Hydraulic Fracturing Affected by Horizontal Principal Stress / Bo Huang; Tian Hui Ma; Ai Shan Li; Jian Qiu Sun; Liao Yuan Zhang |
Dual Variables System Analysis for Timoshenko Beam / Shi Wei Guo |
The Effect of Nonlinear Isolator on Diesel Engine Vibration Isolation System / Yu Chao Song; Zhao Qi He; Zhen Zhong Li |
Analysis of the Dynamic Characteristics of the Feeding Stage with Different Guideway Systems / Jui Pin Hung; Gen Nan Kuo; Tzuo Lung Luo |
Asymptotic Behavior of a Chemostat Model with Watt Type Functional Response and Variable Yield / Qing Lai Dong; Ming Juan Sun |
Hermetically Metal Sealing Random Vibration Damage Mechanism and Fatigue Life Prediction / Teng Han; Xiao Qi He; Yun Fei En |
Analysis to Earthquake Resistant Behavior of Composite Steel Plate Shear Wall Based on ABAQUS Software / De Jian Yang; Zong Chen |
Random Vibration Analysis of Grid-Controlled Electron Gun in High Power TWT / Sha Xu; Ke Juan Chen; Fang Fang Song |
Parametric Design and Modal Analysis on Four-Order Elliptical Gear / Zhi Dong Huang; An Min Hui; Guang Yang; Rui Yang Li |
The Analysis of the Flutter Region of Wind Turbine Blade / Hao Wang; Bing Ma; Jiao Jiao Ding |
Research Modal Analysis Method of MW Wind Turbines / Yong Shui Luo; Min Qiang Zhou; Wei Jiang Liu; Qi Chen; Shou Bin Wang |
Theoretical Analysis of Seismic Response for Marine Drilling Risers / Jun Qiang Li; Yi Fan Li; Yong Peng |
Influence of Axis Curvature Radius on New Annular MEFP / Tao Zhou; Zhong Hua Du; Li Li Song |
Random Response Analysis of Vibration Transfer Path Systems with Translational and Rotational Motions / Wei Zhao; Na Zhou; Yi Min Zhang |
Dynamic Performance Analysis of Steel Truss Bridge / Shan Shan Wang; Tao Xu; Si Feng Qin; Yun Jie Zhang |
Research Overview of Full Aero-Engine Dynamic Response Caused by Blade-Off / Dong Ye; Hai Jun Xuan; Lu Lu Liu |
Monitoring and Analysis of Historic Building Vibration Influenced by Blasting in Complex Urban Environment / Jun Ma; Long Fa Luan; Xin Han Li; Jian Guo Wang; Qi Hang Li |
Statistical Energy Analysis of Subway Wheel/Track Noise / Xiao Feng Zhang; You Gang Xiao; Yu Shi; Wu Yang Zeng |
Analysis of Damping Force Changing with Temperature for Self-Feedback-Friction Damper / Hai Yang Liu; Dong Zhao; Lian Jiang Sun; Meng Zhang |
Experimental Research on the Levitation Support Way of Ultrasonic Thrust Bearing / Yun Guang Song; Zun Qiang Fan; Xiao Dong Sun; Liang Liang Wang; Feng Jun Tian; Hao Cai; Xing Lin Wang; Han Lu Yang; Ai Juan Quan |
Dynamic Response Analysis of Start-Up Transient in Air Conditioning System / Prakob Surawattanawan; Surasit Polpun |
Random Response Analysis of a Large-Size Cooling Tower Subjected to the Stationary Earthquake Motion / Jia Ning Zhu; Ya Zhou Xu; Guo Liang Bai; Rui Wen Li |
Dynamic Properties of Machine Bolted Joints Summary / Wei Wei An; Zhuo Rong Gong; Tong Zhao |
Experimental Study on the Performance of the Laminated Steel Isolators / Yao Guo Xie; Ping He; Xian Qiang Qu; Hong Bin Cui |
Modeling and Simulation of Horizontal Single Head Screw Conveyor with Different Fill Levels and Rotational Speed Based on EDEM / Lei Mei; Ji Quan Hu; Yong Zhi Li; Gong Bo Yang |
An Application of the Maximum Shear Strain Increment in Searching Sliding Surfaces / Liu Yong Cheng; Jian Li; Shan Xiong Chen; Xiao Jie Chu |
The Damage Mechanics Model of the Wellbore Surrounding Rock Based on Fractal Theory / Rui Xiang Shi; Chi Ai; Wan Chun Zhao; Xiao Han Feng |
Boundary Element Method for Crack Analysis in Two-Dimension Anisotropic Solid / Chong Xi Liu |
The Influence Area of a Supersonically Expanding Spherical Inclusion / Xiao Jun Su; Su Rong Huang |
Mechanical Component Reliability Calculation through Multi-Plane Combination Method / Hai Tao Lu; Yu Ge Dong |
The Scattering Waves by Two Spheres in Solid / Yan Ru Zhang; Pei Jun Wei |
Further Study on the Net Shear Strain Energy Density Theory / Shou Yi Xue |
Research on Dynamic Compression-Shear Behavior of Closed-Cell Aluminum Foam / Jiang Ren Lu; Jian Zhang; Xin Li Sun; Xing Hui Cai |
Improved Transfer Matrix Method in Analysis of Cylindrical Shell with Partially Covered Constrained Layer Damping / Hao Chuan Wan; Yi Nong Li; Ling Zheng |
Nonlinear Response and Fatigue Life of Thin Plates Subjected to Non-Uniform Temperature Distributions and Acoustic Excitations / Yun Dong Sha; Lin Zhu; Guo Zhi Zhang; Xiao Chi Luan |
Equilibrium of a Thick-Walled Sphere of Inhomogeneous Nonlinear-Elastic Material / Vladimir I. Andreev |
Analysis and Simulation of the Fluid Field in Thermal Water-Jet Nozzle Based on ANSYS FLUENT & ICEM CFD / Jian Zhao Zhou; Xiao Pan Xu; Wei Jun Chu; Zi Cheng Zhu; Yun He Chen; Si Wei Lai |
A Survey of Fluidic Thrust Vectoring Nozzle by Numerical Analysis / Li Li; Zhi Hui Shi; Tsutomu Saito |
Static Force Measurement Technology Wind Tunnel Test / Dun Jin; Yue Ming Yang; Jie Wu; Li Min Song; Song Li |
Application of Conjugate Heat Transfer in Multidisciplinary Design Optimization of Internal-Cooled Turbine Blade / Sheng Zhong Xu; Xiang Jun Fang; Zhao Yin |
Numerical Simulation of Cross-Flow around Four Square Cylinders in a Square Configuration at Low Reynolds Number / Wei Zhang; Wen Jie Li; Hui Hua Ye; Dian Xin Zhang |
Aerodynamic Analysis of Inflatable Membrane Aeroshell / Jian Zheng Wei; Rui Qiang Ma; Hui Feng Tan; Wen Ting Zhang |
Numerical Simulation of Boiling Flow in LNG Releasing Underwater Process / Bin Zhang; Jian Wei Zhang; Wan Qing Wu; Gui Feng Yu |
Water Coning Simulation Mode in Fractured Gas Reservoir with Bottom Water / Xiao He Huang; Wei Yao Zhu; Yu Lou |
The Research of the Seepage Regularity of Power-Law Fluid under Porosity Scale / Er Long Yang; Yu Xin Gao; Dong Liang Li |
Calculation of Regular Longitudinal Wave Force in MMG Model Based on CFD / Lin Jia Yang; Yi Han Tao |
Study on Water Spraying System in Wet Electrostatic Precipitator / Li Chun Xiao; Zhi Jiang Ding; Qiang Li |
Application of Particle Finite Element Method in Axially Symmetric Fluid-Structure Interaction Problems / Yong Feng Gao; Xiang Yan Zhang; Ning Liu |
Buoyancy-Induced Convection in a Square Enclosure Discretely Heated at One Side and Cooled either at the Top or at the Bottom Using both Gases and Liquids as Working Fluids / Marta Cianfrini; Roberto de Lieto Vollaro; Alessandro Quintino; Massimo Corcione |
Numerical Simulation of Rayleigh-Taylor Instability with Large Density Ratios Based on RKDG Method / Jun Wu Tian; Xiang Jiang Yuan |
On the Treatment of Neumann Boundary Conditions in Collocation-Based Meshless Methods / Xiang Dong Zhang; Lei Wang; Da Wei Teng |
Numerical Simulation of Flow Characteristic in Microchannel between Parallel Flat Plates / Yan Qiu Pan; Peng Lu; Lu Yu; Xin Min Han; Fa Quan Gong; Wan Fa Liu; Feng Ting Sang |
Feasibility Analysis of Laboratory Emulation Study on In-Run Phase of Freestyle Skiing Aerial Athletes / Xin Wang; Yi Ma; Yan Ming Fu |
Analysis of Risk Factors for Military Parachuting Injuries among Chinese Air Force Cadet Pilots / Wen Jing Guo; Yong Ren Chen; Yong Bo Yang; Gao Feng Qu; Dong Yu Liu; Qiu Yang Dong |
Biomechanical Response of Upper Limb Fracture in Real-World Truck-to-Pedestrian Accident Using THUMS (Version 4.0) / Kui Li; Sheng Xiong Liu; Fu Ping Wang; Sen Su; Zhi Yong Yin |
Picomol Assay of Nitric Oxide Screening in Biological Samples by Derivatization Combined with High-Throughput Microplate Format / Xiao Ling Zhang; Qiao Yang |
Research on Negative Pressure Wall Climbing Absorption System Based on SMA / Fang Dai; Gao Hua Liao |
The Correlation Research of Insects Song Sound Quality and Nano-Mechanical Characteristics / Jun Xie; Zhi Yong Chang; Hong Wei Wang; Jie Liang |
The Correlation of Crickets Rubbing Wings Nano-Mechanical Properties and its Friction Sound Characteristics / Jun Xie; Wei Han; Hong Wei Wang; Zhi Yong Chang |
Reconfiguration Modules Based Displacement Group Propagation / Li Ping Zhang; Zhi Yuan Jin; Fan Ling Bu; Gui Bing Pang; Mao Jun Zhou |
Structural Synthesis of Spatial 4-Link Mechanisms for Coil Winding / Wen Hsiang Hsieh; Chih Yang Tseng |
Structural Topology Optimization Method Based on Bone Remodeling / Kaysar Rahman; Nurmamat Helil; Rahmatjan Imin; Mamtimin Geni |
Research Progress of 3D Style Design Based on Sketching / Cui Xian Xuan; Yong Jian Gong; Qiang Li |
Joint Purchase Service System Research Based on User Needs / Lu Fang Zhang; Sha Sha Fang |
Analysis of Young Women's Lower Limb Shape Based on 3D Body Measurement / Guo Yue Pan; Xiao Lu Ye; Jia Nan Zhang; Yong Xie; Feng Yuan Zou |
Technological Research on CPC Product Development Process Based on Extenics / Liu Lei; Fen Fen Yu |
Manufacturability Analysis of Integrated Product Based on Feature Mapping / Jian Ping Tian; Dan Ping Huang; Liang Dong Zhang; Hai Li Yang; Yu Chun Huang |
The Electric Vehicles Developing in Taiwan-Application of Scenario Analysis / Yao Shun Hsueh |
Cycling Comfort Levels for Recumbent Exercise Bicycles / Chien Cheng Yen; Wan Li Wei; Liu Tao |
Research on Commercial Vehicle Clutch Release Bearing Fatigue Life Prediction Model / Guo Liang Chen; Xiao Yang Chen |
Analysis of Process Parameters Influencing V-Bending Based on Dynaform / Guo Ying Ma; Bin Bing Huang; Shou Bo Jiang; Kui Chen |
Resistance Spot Welding Gun System Development Based on C# and Solidworks / Xiu Lan Wen; Xue Long Liu |
Development of Parameterized Simulation and Analysis System for Cylindrical Gear Based on VC++ and ANSYS / Shou Bo Jiang; Bin Bing Huang; Xue Yi Li; Shou Lei Jiang |
The Research on Tool-Database Turning Stone Based on Pro/Toolkit / Xiao Jun Wang; Min Zhao; Yun Feng Zhang |
Tool Path Planning for NC System in Line Contact Machining / Kun Qi Wang; Jing Qi Fan; Le Liu; Lei Xiong |
Modeling and Simulation of Kinematics for Planar R-RRR-RRP Mechanism Based on Assur Rod Group Theory / Xiao Zheng Dang; Liang Sheng Zhou; Dong Liang |
Effect of Cracked Blade Distribution on Strength of Centrifugal Impeller / Gang Cheng; Jian Feng Li; Wei Qiang Wang; Jie Sun |
Finite Element Analysis of the Spindle Box Structure of Large CNC Machine Tool / Mo Wu Lu; Chang Lu; Xu Yang |
Computer Simulation of Filling Process and Temperature Distribution of Oil Pump Cover in Solidification Process / Han Wu Liu; Lian Dong Huang; Shun Qin Fan; Bo Hu |
CAD Model Reuse Based on the Integrate Design History / Ying Jie Wu; Qi Gao; Gang Liu; Xue Ji |
The Method of the Residual Life Prediction of Pressure Vessel Defect Based on Defect Failure Rate Inflection Point / Chong Xu; Wei Long; Da Qing Tian; Si Jian Lin |
Simulation Investigation on Multi-Unit Parallel-Flow Type Condenser with Flat Tubes Distribution / Jian Rong Du; Zu Yi Zheng; Jun Hua Wan; Yi De Wang; Zhong Min Wan; Qiong Guan; Jing Liu |
Sliding Sleeve Fracturing Strength Analysis of the Ball Based on Ansys Workbench / Xiao Feng Shang; Yang Wang; Wei Dong Deng |
Design and Experiment on Flank Type of Cropland Plot Breeding Wheat Drying Car / Fei Dai; Wu Yun Zhao; Feng Wei Zhang; Zheng Sheng Han |
Finite Element Analysis on Telescopic Suspension Arm of Dirt-Removing Crane Based on ANSYS / Dong Dong Liang |
The Improved Design of Machine Tool Structure Based on Sensitivity Analysis / Huan Qin Wu; Wei Qing Wang |
Structural Optimization for Upper Beam of Isothermal Hydraulic Press / Wei Wei |
A Method to Reduce Calculation Time for a Study of a Damper Plate in a High Speed Hard Disk Drive Simulation / Jarupol Suriyawanakul; Kiatfa Tangchaichit |
The Application of Slip Joint Use in Space Frame Structure for Vehicle / Sheng Yun Lee; Ting Hao Cheng; Yu Ting Lin |
Fabrication of Deep Tapered Perforation Using a Modified through-Mask Electrochemical Micromachining / Ping Mei Ming; Zhen Bin Lv; Xiao Hui Bao; Shu Qing Wang; Si Qi Liu |
Research on SHCCT of Weather Resisting Plate for Vehicle / Shi Xin Zhang; Xiao Jun Deng; Shao Jun Liu; Ming Yan Wang; Guo Qing Gou |
The Processing Techniques of Common Guide Rod Used in Mines and its Jig Design / Chang Song Yuan; Ze Long Hao |
The Strength Analysis and Structure Optimization of Packer Slip Based on ANSYS / Zhong Chao Lin |
Practice and Analysis of Life Measuring Device for Motor Valve / Wen Jie Ding |
The Fuzzy Reliability Calculation for Cylinder Liner Wear Life of Internal Combustion Engine / Xiao Xu Liu; Min Chen |
Design of Injection Mold for a Large LCD TV Panel / Jian An Zhou |
The Design of Emergency Self-Rescued Helmet for the Earthquake / Sen Shi; Yu Qi Li; Ping Chen |
Optimization Design of a New Safety Structure of Plate-Fin Heat Exchanger Using Genetic Algorithm / Dong Cai Guo; Meng Liu |
Research on Contact Strength between Roller Screw Pair on Hoisting Mechanism Applied in Deep Sea Crane / Hui Wang; Min Hui Tong; Pei Zheng |
Development of Electrolyte Vacuum Surface-Boiling Electrodeposition Apparatus / Ping Mei Ming; Wen Xing Lv; Jing Yu Shang; Jun Tao Wang; Qiao Lin Hao |
Design of Autoclave Process Water Heat Recovery System / Hong Ling Wei; Pen Yu Wen; Luo Ji Shi |
The Torque Research for Permanent Magnet Coupling Based on Ansoft Maxwell Transient Analysis / Guo Ying Meng; Yao Hong Niu |
Study on the Z-Source Inverter with Low Voltage Stress / Li Ping Zhong; Qi Min Gu; Shui Ping Zhang |
Study on Different Connection Types of Air Spring / Hong Xing Gao; Mao Ru Chi; Min Hao Zhu; Ping Bo Wu |
Analysis and Comparison of Seal Ability of Premium Tubing Connections under Axial Alternating Load / Long Cang Huang; Yin Ping Cao; Yang Yu; Yi Hua Dou |
Research on Bearing Characteristics of the Digging Foundation in Slopes Based on Interface / Bin Peng; Yi Min Shang; Rui Shan Tan; Tao Mei |
Study on the Recycling Machine of Plastic Film with Shovel-Excavation Screening / Ying Chao Liu; Jian Ming Jian; Ying Ding Chen; Shu Lin Hou |
Numerical Simulation Study of the Impellers of the Centrifugal Pump Based on Different Turbulence Models / Ao Hui Guo; Yong Zhong Zeng; Xiao Bing Liu |
The Numerical Simulation Research of Disk-Type Molecular Pump Based on DSMC Method / Bo Liu; De Chun Ba; Li Hua Fan; Li Nan Zhou |
Modified MRAS Speed Controller for Direct Torque Controlled Sensorless Induction Motor Drives / Hsiu Ping Wang; Yu Feng Chang; Fwu Hsing Liu |
Design and Research of Wind Tunnel Test for Deflectable Nose / Bo Zhang; Shu Shan Wang; Meng Yu Cao; Yu Xin Xu |
Plasticization of Trunk Lid and Molding Parameter Optimization / Duo Nian Yu; Chang Ming Shao; Ben Yan Zhang; Lu Han; Lu Yao Zhou |
Diode-Pumped Yb:YAG Thin Disk Laser with a Novel Multi-Pass Pump and Cooling Arrangement / Qiong Ge Song; Guang Hua Cheng; Jiang Feng Zhu |
Simulation and Analysis the Internal Flow Field of Control Valve Bonnet Leakage / Yan Tao An; Ru Jian Ma; Yong Wang |
Optimal Design of the Fluid System on Special Fuel Filling Equipment / Chu Chun Yang; Wei Li; Yong Ye; Gang Shen |
Motion and Evaporation Characteristics of Ethanol Droplet in High Temperature Nitrogen Environment / Meng Long Mi; Lu Liu |
Thermal Simulation of Cooling Channels in Proton Exchange Membrane Fuel Cell / Shi Mei Sun; Wei Liu; Shi Yao |
The Design of High Power LED Headlamp / Wen Lin Chen; Zhen An; Chao Qun Xiang; Chen Yang Liu; Li Na Hao |
Diamagnetic Magnetization Strength as a Consequence of Electromagnetic Induction Law's Effect / Tatyana N. Gnitetskaya; Elena V. Karnauhova |
Design of Micro Power Self-Generation Device / Shu Tang; Kai Xue Yang; Wang Fang; Biao Cai |
The Applied Research of the Super Capacitor in the Maximum Power Tracking of Photovoltaic Systems / Yun Bo Guo; Xin Ren |
A New Fatigue Life Calculation Method Based on Non-Linear Cumulative Damage Theory / Fu Hai Cai; Xin Wang; Fu Ling Zhao |
Modeling and Real-Time Simulation on Doubly Fed Induction Wind Generator / De Tian; Hai Hui Song; Wei Long Wang |
Dynamic Characteristics of a Horizontal Milling Machine with Hybrid Guideway Systems / Jui Pin Hung; Wei Chu Lin; Tzou Lung Luo; Yu Sheng Lai |
Evaluation of Sphericity Error Using Differential Evolution Method / Yue Ping Chen; Long Jin; Shu Ping Li; Shi Liu Song; Yan Liang |
Capacity Buffer Design for Critical Equipment Caused by Unexpected Production Mission / Yuan Liu; Jing Jing Hao; Hong Bin Ying |
On the Modern Service Industry to Separat from the Manufacturing Industry in Hebei Province / Bang Fan Liu; Shui Xu; Xiu Li Ma |
The Construction Safety Accident Emergency Decision Support System Based on Ontology and CBR / Yan Ling Zhu |
Customer Value Assessment towards Transport Modes of Tourism after a Natural Disaster of Scenic Spots - The Analysis Based on Choice Experiment / Jiang Liu; Wei Li; Li Huang |
A Study of Environmental Risk Comparison Based on Set Pair Analysis Theory / Lin Wang; Zhong Qiang Ma; Shu Ping Yu; Jing Hai Zhu |
Research on Capacity-Constrained Manufacturing/Remanufacturing Hybrid System with Outsourcing / Ying Zhou; Ming Rong Deng |
Supply Chain Modeling Based on Multi-AGENT Research / Li Li Jiang; Xu He |
Performance Evaluation of Green Supply Chain Based on Catastrophe Progression Method / Hai Dong; Shuang Dong |
A Heuristic Algorithm for Integrated Surplus Inventory Matching Problem in Steel Enterprises / Can Tao Shi; Ting Li; Yu Zhuo Liu |
A Modified Genetic Algorithm for Total Processing Time Minimization in the Manufacturing Process Planning Problem / Can Tao Shi; Qi You Liu; Yu Zhuo Liu |
An Evolutionary Game Model of the Establishment of Tracebility System in Food Supply Chain / Sai Tang |
Decision Making and Economic Analysis for Accelerated Bridge Construction / Zeng Zhong Wang; Bin Shi |
Introducing Project-Based Learning to Design Enterprises for Creativity / Feng Wang; Chun Fang Zhou; Hong Bing Chen |
Scheduling Problems with Human and Machine Effects / Na Yin; Tian Chuan Sun |
The Empirical Research about the Impact on the Accounting System Changes to Earning Quality - Taking Manufacturing of a-Shares as an Example / Jun Li; Bin Mei; Su Fang Li |
Dynamic Context-Aware System Based on Multi-Level Material Data Control Model / Dong Juan Xue; Ying Pan |
Coordinated Joint Development of Manufacturing and Morden Logistics / Hui He |
Single-Machine Scheduling with Resource-Dependent Learning Effect and Deteriorating Jobs / Yan Peng Fan; Chuan Li Zhao |
Material Data Integration Model Based on Context-Aware within Manufacturing Enterprises |
Modeling and Scheme Generation of Dynamic Flexible Job-Shop Scheduling / Ying Pan; Dong Juan Xue; Tian Yi Gao; Li Bin Zhou; Xiao Yu Xie |
Research on Strategy of Dynamic Flexible Job-Shop Scheduling |
Equilibrium and Non-Equilibrium Solution of Nonlinear Population Evolution Systems / Jin Mei Wang |
Industrial Process Measurement and Control Equipment Reliability Analysis Based on Physics of Failure / Cheng Cheng Wang; Xiao Jing Liu; Ke Mei |
Innovation in Low Carbon Printing & Packaging / Zhen Cai Qu |
Research on Technology Integration Innovation Platform Performance Evaluation / Cheng Qiang Liu; Guo Ping Cheng |
Study on Evaluation and Optimization of Major Scientific Research Projects / Xiao Min Huang |
The Impact of Recovery Strategies on Brand Trust after Production Operations Management Failure / Pan Wei Cui; Wei Li; Yang Yang |
ATC Estimation Approach Applying Co-Evolutionary Strategy / Ai Ping Chai |
Application of Fuzzy Mathematics in Selection Air Flow Regulating Program / Wei Wei Ye; Xian Ping Xie; Meng Wei Han; Shi Yun Luo; Zhen Li; Yan Bo Wang |
Study of Gas Emission Quantity Prediction Based on Chaotic Time Series / Gao Hua Liao; Yu Juan Tang; Fang Dai |
A Frequency Modulation GMI Magnetic Sensor Base on Inverter Multivibrator with Longitudinal Excitation / Bo Yang; Xiong Zhu Bu; Xian Jin Huang |
Research on Temperature Compensation Method of Quartz Flexible Accelerometer / Sen Lin Mu; Fu Bin Chen; Jing Min Gao; Zhi Zhong Wu |
A New Electrochemical Host-Guest Recognition Sensor for DNA Detection / Lin Cheng; Yan Lin; Cui Han Feng; Hao Fan |
Optimization of a Novel Micro-Hotplate for Gas Sensor / Chang Chun Li; Xiao Bo Zhang; Li Liu |
Experimental Research on Spiral Macrobend Loss of Multimode Fibers / Ruo Dan Ni; Xue Song; Li Juan Qian; Si Hui Wang; Ben Buryar |
A New Electrochemical Sensor for DNA Detection Based on Au Nanoparticles Surface-Modified with #946;-Cyclodextrins / Lin Cheng; Cui Han Feng; Hao Fan |
An Improved Hall Vehicle Speed Sensor Detection System / Zheng Kun Qin; Shu Yuan Li; Chun Wu Wang; Zhong Ping Ma |
Aeroengine Exhaust Gas Temperature Prediction Using Process Neural Network with Time-Varying Threshold Functions / Gang Ding; Xiong Wei Wang; Da Lei |
Health Condition Prognostics of Complex Equipment Based on Discrete Input Process Neural Networks / Gang Ding; Da Lei; Wei Yao |
Aeroengine Exhausted Gas Temperature Prediction Using Process Extreme Learning Machine |
Study on the Intelligent Software Testing Systems for Axles / Zhi Hong Ma; Shan Le Cai; Fu Fang Luo |
Study on Sulfur Compounds in the Gasoline / Shu Jun Liu; Hao Nan Xu; Kun Feng; Ying Wang |
The Infrared Diagnostic Technology of Power Transmission Devices and Experimental Study / Xu Dong Deng; Kai Zheng; Gang Wei; Jin Hong Tang; Zuo Peng Zhang |
Design of Indoor Harmful Gas Monitor System / Yan Ling Yang; Zhi Ying Xie |
Research of the Elevator Monitoring System Based on the Internet of Things / Shui Lin Tu; Zheng Yang Wu; Bin Qian |
Blade Inspection System / Tian Chen |
Research on Crater Wear Monitoring in Turning / Xue Feng Bi; Cheng San Yang |
Study on Development Trend of Intellectualization of Condition Monitoring for Port Logistics Machinery in Western China / Yong Wang; Ya Shuang Wu; Lin Shuai Wang |
Technology of NC Machine Error Parameter Identification Based on BP Neural Network / Yao Ming Li; Xing Quan Shen |
Fabric Weave Pattern's Recognition Based on Texture Orientation Features / Jian Qiang Shen; Ge Ge Li; Xuan Zou; Yan Li |
Researching Metrology System on the Basis of Laser Tracker / Zhong Yi Mei; Zhen Wei Luo |
Design of Measure and Control System of the Ring Block Casing Wear Tester / Xiang Tong Yang; Xiao Zeng Wang; Yin Ping Cao; Yi Hua Dou |
Employing Remote Mobile Scheme to Control Work Area via an Integrated Wireless Network / Kuang Yow Lian; Sung Jung Hsiao; Wen Tsai Sung |
Optimal Sample Size Allocation for Multi-Level Stress Testing under Progressive Hybrid Interval Censoring / Hong Bo Yue; Yi Min Shi |
The Hardware Design of Ultrasonic Flaw Detector Based on Single-Chip Microcomputer AT89C52 / Wei Liu; Zhuo Lin Miao; Huan Xin Cheng; Li Cheng |
Bulk Unloading Crane Monitoring System's Design and Development Based on Kingview / Xue Song Pang; Zeng Rong Su |
A Multi-Degree of Freedom Laser Scanning Simulation Platform / Hua Jie Sun; Jin Huang; Ge Guo; Ying Hu |
Research and Implementation of Positioning System Based on Ultrasonic / Hui Feng Wang; Xiao Hua Liu |
EEMD-ApEn Applied in Power Quality Detection and Classification / Yu Xiang Su; Guo Ping Liu; Xiao Qun Shen |
Advances in Data-Driven Monitoring Methods for Complex Process / Ru Qing Chen |
Research of Snow-Degraded Image Clearness Methods / Kai Song; Dong Yang; Xin Nie |
The Technology Research for the Extraction of Human Eyes Feature / Hui Ying Ning |
Study on Signals Processing in State Detection of Tunnel Excavation Equipment's Cutter Head / Jing Yi Liang; Ping Li; Lei Chen |
Application of Wavelet Denoising Algorithm in Nondestructive Testing Based on LabVIEW / Yong Fang Yu; Dao Sheng Zhang; Huan Xin Cheng; Li Cheng |
Ultrasonic Testing Signal De-Noising Processing Based on Orthogonal Matching Pursuit Algorithm / Yong Fang Yu; Fei Yi; Huan Xin Cheng; Li Cheng |
Research on De-Noising Technology in Ultrasonic on-Line Detecting System / Huan Xin Cheng; Zhen Huan Cheng; Wei Liu; Li Cheng |
A Simple Method for Data Processing of Surface Dynamometer Card / Wen Sun; San Min Wang; Tao Ren |
Fault Diagnosis of Bearing Based on Selective Ensemble of Multiple Fuzzy ARTMAP Neural Networks / Zeng Bing Xu; Hong Wu; Tie Lin Shi |
Study on Thermogravimetry Data of Cooking Oil Tar Based on Adaptive Wavelet Analysis / Zheng Wen Xie |
Research on the Algorithm of Adaptive Loop Filter Based on Flexible Quadtree / Gang Wang; He Xin Chen; Mian Shu Chen |
Research of Vector Hydrophone Adaptive Signal Processing / Bo Le Ma; Jing Fang Cheng; Wei Zhang |
Research on Virtual Simulation Technique Based on Shader / Qing Chun Cui; Xing Xin Li; Jian Ping Hao |
New just-Noticeable-Distortion Model Based on the Depth Information and its Application in Multiview Video Coding / Xing Yu Liu; Mei Yu; Tao Tian; Chao Zheng Hu |
Research on Panorama Generation Based on Homography Estimation / Jie Ying; Yan Bin Song; Lin Li Lu |
An Enhanced NAS-RIF Algorithm for Blind Image Restoration Based on Total Variation Regularization / Xin Ke Li; Chao Gao; Yong Cai Guo; Yan Hua Shao |
Sub-Pixel Edge Detection on the Product Line / Xia Zhu; Yu Lin Zhang |
Vision Measurement for the Pose of Cannon Barrel / Jian Dong Su; Xiu Sheng Duan; Jing Xiao |
Faulty Insulator Diagnosis for UAV Videos Based on Repetitiveness Feature / Lan Lin; Bing Feng Li; Ling Wang; Yang Cong; Yan Dong Tang |
Hybrid Algorithm for Face Recognition Using an Evolutionary Software Engineering / Hector Vargas; Aldo Martinez |
A Vision-Based System for Power Transmission Facilities Detection / Deng Lu Wu; Bing Feng Li; Wen Tao Li; Yong Xia; Yan Dong Tang |
Non-Destructive Testing Device for Hot Forming High Strength Steel Parts Based on Barkhausen Noise / Xiao Yu Luo; Yu Zhang; Zi Jian Wang; Yi Sheng Zhang |
The Design of High-Precision Temperature Measurement System Based on C8051F350 and PT100 / Long Liu; Yun Cui Zhang; Shen Hua; Jun Xiao; Li Jia Huang |
Research of Smart Composite Insulator with Optical Fiber Bragg Grating / Hong Lei Yang; Shi Bin Liang; Xue Peng Miao; Min Cao; Ming Chang |
Extraction of Optimal Contour Dominant Points Based on ICT Images in Reverse Engineering / Guang Shuai Liu; Bai Lin Li |
An Automatic Testing System Design for Accelerometer Based on LabVIEW / K.B Zhang; J.L Zhang; J.M Gao; Z.Z Wu |
Study of InSAS Interferogram Filtering Based on Lattice Boltzmann Method / Chao Shuai Song; Jun Yue; Hong Xiu Gao |
Automatic Point Clouds Registration Method Based on Mesh Segmentation / Li Hua Fan; Bo Liu; Bao Ling Xie; Qi Chen |
Image Matching Application Based on Modified SURF Algorithm / Zhen Yuan Ma; Shi Xu Shi; Li Xian Yuan; Pei Chang Gu; Han Huang |
The Analysis of Sporopollen Data Based on Fuzzy Mathematics / Cui Xiang Wang |
Ceramic Microstructure Image Segmentation by Mean Shift / Hua Hui Cai; Yan Cheng; Bing Xiang Liu |
Three-Dimensional CT Imaging with Volume Rending of Separating Fusing, Opacifying and False-Coloring Technique / Shao Yin Duan; Hua Zhong; Feng Ye |
The Experimental Research on the Static-Loaded Beam Based on the Artificial Neural Network Technique / Jun Zhang; Qing Yang Cai; Hong Mei Tang; Bang Zeng Guo |
An Insect Song Signal Feature Extraction Method Based on the Wavelet Packet Analysis / Jun Xie; Hong Wei Wang; Mei Zhao; Kai Yu Yang |
Video Transmission Control System Based on 3G Wireless Network / Kun Qi Wang; Lei Xiong; Bao Chen Yang; Chen Cong Meng |
Study on Data Transfer Mode of Port Logistics Operating Machinery Based on Industrial Ethernet / Yong Wang; Ling Li Li; Lin Shuai Wang |
Hardware Circuit Design for Direct-Coupled SVG / Xian Bin Dai; Jian Yin; Wei Du |
Research and Implementation of Lithium Primary Battery Management System for Mine Rescue Equipment / Jian Jun Wang; Xue Qing Yuan; Bo Li |
Design and Simulation of Testing Circuit for Radio Frequency Chip / Qing Luo; Hui Chen; Guo Yuan Li |
Design of High Power RGB White Light Emitting Diodes / Wei Chen; Lang Wang; Lian Qiao Yang; Jian Hua Zhang |
The Application of Data Radio Broadcasting Station Base on GPRS / Feng Zheng; Han Rong Lu; Le Jiang Guo |
Remote Communication System for Transmission Line Monitoring Based on CMA / Wei Wang; Hui Deng; Wen Shen; Qi Gui Yao; Xiang Qun Wang |
Spontaneous Radiation Energy of Current Filaments in GaAs Photoconductive Semiconductor Switches / Hong Liu; Li Zheng; Hong Jun Yang; Wei Yang; Yong Lin Zheng |
Design of Outdoor Unit for Wireless Microwave Transmission System / Bin Wen Huang; Yuan Jiao |
A New Routing Method Based on Hybrid Algorithm / Jian Hui Chen; Yu Lan Tang |
Ethernet Controller and Serial Interface Conversion Technology Based on FPGA / Jie Fei Zhang; Peng Fei Zhan; Gang Zhang |
Modified BP Neural Network Model is Used for Odd-Even Discrimination of Integer Number / Bao Long Hu; Ji Ren Xu; Huai Hui Gao; Ji Hai Liu; Ke Ren Wang |
Complete Design of Circuit Board Based on Altium Desinger Summer 09 / Li Zhang; Xiao Feng Peng; Li He; Wen Lue Wan |
Analysis of a New Design of FSS / Yi Chao Song; Kang Bo Tan; Xiang Ping Wang; Tao Su; Hong Min Lu |
Study of System Modeling and Simulation Based on Mixed Domain for Analog-Digital Mixed SoC / Jun Deng; Liang Zhou; Xiao Zong Huang; Xu Huang; Yu Jing Li; Lin Tao Liu; Yi Tao |
Research of the IT Capability Maturity Model and its Extension Evaluation of Smart Grid / Zi Long Cai; Hong Chun Shu; Wen Zhang |
Dynamic Delegation Approach in the Electronic Evidence Storage of Cloud Platform / Yan Fei Wang; Jun Xie; Zheng Guang Xian |
Conflict and Hidden Trouble of Distributing Misplay at Memory Resources / Hua Shu Yang; Yi Wang; Yu Lu Yang; Xin Long Peng; Xue Peng Wang; Ying Ju Pu |
Interest Mining Algorithm Based on Blog Information / Guo Hua Ou; Chang Jian Xu; Hao Xun Zhan; Yong Qin; Han Huang |
Research on Information Processing Technology of Title Bar for AutoCAD/ERP Integration / Li Li; Zhao Yun Wu; Li Hui Wu; Nan Bo Liu |
Increase the Innovation Dynamics by Information and Communication Technology (ICT): Examples of E-Government / Hong Bing Chen; Jian Min Zhou; Chun Fang Zhou |
Algorithm Design of Gravity and Magnetic 3D Parallel Inversion Based on Multithreading Technology / Wen Li Wu; Meng Liang; Wei He |
Research of IPv6 Evolution Technology / Gui Xin Zhao |
The Design of Distributed File System Based on HDFS / Yan Nan Wang; Shu Dong Zhang; Hui Liu |
Design and Development of EOS/MODIS Satellite Data Automatic Download Robot / Dan Yang Cao; Kang Ning Xu; Zhi Yan Wang; Ji Wu Ma |
The Auto-Design Network Platform of Synthesis Mining Curve Based on J2EE / Li Ping Yang; Wei Wang |
Buddy Algorithm Optimization in Linux Memory Management / Zhao Fei Meng; Shu Dong Zhang |
Towards an Entity-Based Scientific Metadata Schema / Hao Xu |
Towards a Semantic LaTeX for Managing Scientific Knowledge |
RETRACTED: Analysis of a System / Chang Guang Shi |
Study on the Storage of Chinese Character Font Library and Graphics Library on SPI Flash Chip / Lin Shen; Gang Du; Ya Hui Hou; Na Na Zhang |
The Accuracy Analysis of Parallel Mechanism Assembly Robot / Xin Rong Liu |
Design and Simulation of Five-Fingered Hand with Linkage Mechanism / Bao Lin Yin; Bing Bing Yan; Jun Fa Wang |
The Development of Special CNC System for Profiling Lathe Based on Digital Capture Measurement / Ping Jiang Wang; Yang Wu; Jiang Fei Qi; Ji Hong Chen; Hua Xiang |
Real-Time Solution of Inverse Kinematics for 6R Robot Manipulators Using Digital Signal Processor / Lin Chen; Hai Hong Pan; Han Ling Mao |
Research on the Double-Loop Robust Control Technology for the Electric-Hydraulic Servo System / Tian Peng He; Shu Li; Xiao Long Li |
Gait Transition of Quadruped Robot Using Time Sequence Control Based on Finite-State Machine / An Liu; Xiao Yu Zhang; Kai Ge Zhang |
Control System of Tension Test for Spring Fan Wheel Assembly / Kun Qi Wang; Chen Cong Meng; Ping Li; Jing Qi Fan |
Full Software CNC System Based on RTLinux / Kun Qi Wang; Le Liu; Jing Qi Fan; Bao Chen Yang |
The Multi-Model Predictive Control Method Research on the Outlet Temperature Control of Hot-Blast Stove / Yin Jun Zhang; Jian Huan Su; Zheng Jie Lu |
Project Donaxi@HOME Service Robot / Hector S. Vargas; Edson Olmedo; Aldo Daniel Martinez; Victor Poisot; Agustin Perroni; Andres Rodriguez; Omar Granillo; Carlos Merino; Carlos Peto; Wesli Antonio; Carlos Carbonel; Aldo Orozco |
A 3-DOF Controlled, High-Speed, High-Precision Local Actuator for Micro Electrical Discharge Machining / Xiao You Zhang; Tomohiro Ishizuka; Kouki Uchiyama |
Study on Improved Fuzzy Immune PID Controller for Maglev Transportation System with Track Irregularity / Rong Rong Song; Wei Hua Ma; Zi Li Chen |
Application of Internet of Things in Monitoring System of Intelligent Building / Hong Mei Qu; Xiao San Tao |
Control Algorithm Analysis of Rig's Electro-Hydraulic Proportional Control System / Xiao Ying Zhao |
Research and Implementation of Speed Controlling Algorithm on Intelligent Racing Car / Zeng Wen Dong; De Quan Zeng; Ji Zhong Liu; Gen Liang Xiong; Hai Yan Ou |
A Method of High Accuracy Control for Motor-Based Photoelectric Tracking Instrumentation Base on Inclinometer / Da Yong Ning; Chang Le Sun; Yong Jun Gong |
Design and Simulation of the Intelligent Control of the Greenhouse Temperature / Lin Zhao |
A Framework of an Intelligent Process Planning System for Milling Based on STEP-NC / Hua Bing Ouyang |
Coordination Control for RBS and ABS / Yi Yang; Liang Chu; Liang Yao; Jing Wen |
Research on High Power Direct Drive Differential Volume Control Electro-Hydraulic Servo System / Zhu Xin Zhang; Xin Yun Xu |
A New Direct Algorithm for Pole-Placement by State-Derivative Feedback for Single-Input Linear Systems / Zun Hai Gao |
Research on the Key Technology of Automatic Programming System for Line-Contact Processing / Kun Qi Wang; Bao Chen Yang; Lei Xiong; Le Liu |
Freeway Ramp Metering Based on Cell Transmission Model and Single Neuron / Yan Di Ye; Yan Yan Liu; Xin Rong Liang; Chao Jun Dong |
Research on Electro-Hydraulic Proportional Self-Tuning Fuzzy-PID Control System Based on MATLAB / Min Jjie Li; Guang Sheng Ren |
Research on Control Scheme of Daul-Cyinder Reverse Synchronous Hydraulic System / Guo Hua Zhao |
Application Research on Learning Strategy Control of Daul-Cylinder Synchronous Movement / Guo Hua Zhao; Jian Guo Chen |
The Electronic Control System of Automatic Optical Scissors and Optical Tweezers / Yi Zhi Li; Shun Quan Shen; An Pei Ye |
The Research and Application of Particle Swarm Optimization in Parameter Tuning on PID Controller / Yu Lan Tang; Jian Hui Chen |
Dynamic Infrared Scene Simulation Study Based on DMD Imaging System / Yi Yuan Ding; Shu Chen Xiao |
Digital Automatic Assembly Technology of Stubble-Cutting Equipment of No-Till Planter / Xiao Hu Bai; Fang Li; Jing Lin |
Benchmarking the Industrial Expectations of Civil Engineering Students through Internship Placements / Lau Teck Leong; Boon Hoe Goh; Chung Lian Liew; Wee Kang Choong |
Java Course Teaching System Based on Practice and Innovation Ability Training |
Research on the Evaluation of Cost-Effectiveness of Universities / Cheng Wang |
Optimal Model of Predicting the School Effectiveness of Universities / Cong Jun Rao |
Study on Evaluation Methods of Disciplines in Universities |
Study on Manufacturing Practice Platform Construction of Mechanical Industrial Design / Xiao Wei Jiang; Qiu Lei Du |
Comparison Analysis of Train Derailment between Bridges and Lines / Su Gong Cao; Rui Lin Chen; Zhang Tang; Xin Qiang Xiao; Hong Bo Hu; Shi Jiang Tang; Yong Qiang Liu; Rui Hong Gao |
Applicability Study on Simulating Interference of Mixed Traffic at Signalized Intersections Using VISSIM / Cheng Hua Li; Shan Shan Li |
Study of Chinese Tourism Planning towards Cultural and Regional Integration / Yong Jin Liu |
The Urban Road Short-Term Traffic Flow Prediction Research / Zhen Hai Qin |
Study on Numerical Simulation of Secondary Dust Deposition Phenomenon / Bicao Can Ling; Hai Yang Ju; Zheng Ye |
Cause Analysis of the Various Shapes of Leaves and Estimate the Actual Weight of the Leaves / Wen Hua Sun; Jiang Hua Liu; Xiao Long Ni; Wen Fang Fan |
Facial Diagnosis of CHB Clinical Syndromes Based on Computer Technology / Zhi Wang; Rui Zhou; Fu Feng Li; Peng Qian; Zhu Mei Sun |
Family House-Purchase Decision Model Based on Analytic Hierarchy Process |