close
1.

図書

図書
Charles E. Baukal, Jr.
出版情報: Boca Raton, Fla. : CRC Press, c2000  545 p. ; 27 cm
所蔵情報: loading…
目次情報: 続きを見る
Introduction / Chapter 1:
Importance of Heat Transfer in Industrial Combustion / 1.1:
Energy Consumption / 1.1.1:
Research Needs / 1.1.2:
Literature Discussion / 1.2:
Heat Transfer / 1.2.1:
Combustion / 1.2.2:
Heat Transfer and Combustion / 1.2.3:
Combustion System Components / 1.3:
Burners / 1.3.1:
Competing Priorities / 1.3.1.1:
Design Factors / 1.3.1.2:
General Burner Types / 1.3.1.3:
Combustors / 1.3.2:
Design Considerations / 1.3.2.1:
General Classifications / 1.3.2.2:
Heat Load / 1.3.3:
Process Tubes / 1.3.3.1:
Moving Substrate / 1.3.3.2:
Opaque Materials / 1.3.3.3:
Transparent Materials / 1.3.3.4:
Heat Recovery Devices / 1.3.4:
Recuperators / 1.3.4.1:
Regenerators / 1.3.4.2:
References
Some Fundamentals of Combustion / Chapter 2:
Combustion Chemistry / 2.1:
Fuel Properties / 2.1.1:
Oxidizer Composition / 2.1.2:
Mixture Ratio / 2.1.3:
Operating Regimes / 2.1.4:
Combustion Properties / 2.2:
Combustion Products / 2.2.1:
Air and Fuel Preheat Temperature / 2.2.1.1:
Fuel Composition / 2.2.1.4:
Flame Temperature / 2.2.2:
Oxidizer and Fuel Composition / 2.2.2.1:
Oxidizer and Fuel Preheat Temperature / 2.2.2.2:
Available Heat / 2.2.3:
Flue Gas Volume / 2.2.4:
Exhaust Product Transport Properties / 2.3:
Density / 2.3.1:
Specific Heat / 2.3.2:
Thermal Conductivity / 2.3.3:
Viscosity / 2.3.4:
Prandtl Number / 2.3.5:
Lewis Number / 2.3.6:
Heat Transfer Modes / Chapter 3:
Convection / 3.1:
Forced Convection / 3.2.1:
Forced Convection from Flames / 3.2.1.1:
Forced Convection from Outside Combustor Wall / 3.2.1.2:
Forced Convection from Hot Gases to Tubes / 3.2.1.3:
Natural Convection / 3.2.2:
Natural Convection from Flames / 3.2.2.1:
Natural Convection from Outside Combustor Wall / 3.2.2.2:
Radiation / 3.3:
Surface Radiation / 3.3.1:
Nonluminous Radiation / 3.3.2:
Theory / 3.3.2.1:
Combustion Studies / 3.3.2.2:
Luminous Radiation / 3.3.3:
Conduction / 3.3.3.1:
Steady-State Conduction / 3.4.1:
Transient Conduction / 3.4.2:
Phase Change / 3.5:
Melting / 3.5.1:
Boiling / 3.5.2:
Internal Boiling / 3.5.2.1:
External Boiling / 3.5.2.2:
Condensation / 3.5.3:
Heat Sources and Sinks / Chapter 4:
Heat Sources / 4.1:
Combustibles / 4.1.1:
Fuel Combustion / 4.1.1.1:
Volatile Combustion / 4.1.1.2:
Thermochemical Heat Release / 4.1.2:
Equilibrium TCHR / 4.1.2.1:
Catalytic TCHR / 4.1.2.2:
Mixed TCHR / 4.1.2.3:
Heat Sinks / 4.2:
Load / 4.2.1:
Tubes / 4.2.1.1:
Substrate / 4.2.1.2:
Granular Solid / 4.2.1.3:
Molten Liquid / 4.2.1.4:
Surface Conditions / 4.2.1.5:
Wall Losses / 4.2.2:
Openings / 4.2.3:
Gas Flow Through Openings / 4.2.3.1:
Material Transport / 4.2.4:
Computer Modeling / Chapter 5:
Combustion Modeling / 5.1:
Modeling Approaches / 5.2:
Fluid Dynamics / 5.2.1:
Moment Averaging / 5.2.1.1:
Vortex Methods / 5.2.1.2:
Spectral Methods / 5.2.1.3:
Direct Numerical Simulation / 5.2.1.4:
Geometry / 5.2.2:
Zero-Dimensional Modeling / 5.2.2.1:
One-Dimensional Modeling / 5.2.2.2:
Multi-dimensional Modeling / 5.2.2.3:
Reaction Chemistry / 5.2.3:
Nonreacting Flows / 5.2.3.1:
Simplified Chemistry / 5.2.3.2:
Complex Chemistry / 5.2.3.3:
Nonradiating / 5.2.4:
Participating Media / 5.2.4.2:
Time Dependence / 5.2.5:
Steady State / 5.2.5.1:
Transient / 5.2.5.2:
Simplified Models / 5.3:
Computational Fluid Dynamic Modeling / 5.4:
Increasing Popularity of CFD / 5.4.1:
Potential Problems of CFD / 5.4.2:
Equations / 5.4.3:
Chemistry / 5.4.3.1:
Multiple Phases / 5.4.3.4:
Boundary and Initial Conditions / 5.4.4:
Inlets and Outlets / 5.4.4.1:
Surfaces / 5.4.4.2:
Symmetry / 5.4.4.3:
Discretization / 5.4.5:
Finite Difference Technique / 5.4.5.1:
Finite Volume Technique / 5.4.5.2:
Finite Element Technique / 5.4.5.3:
Mixed / 5.4.5.4:
None / 5.4.5.5:
Solution Methods / 5.4.6:
Model Validation / 5.4.7:
Industrial Combustion Examples / 5.4.8:
Modeling Burners / 5.4.8.1:
Modeling Combustors / 5.4.8.2:
Experimental Techniques / Chapter 6:
Heat Flux / 6.1:
Total Heat Flux / 6.2.1:
Steady-State Uncooled Solids / 6.2.1.1:
Steady-State Cooled Solids / 6.2.1.2:
Steady-State Cooled Gages / 6.2.1.3:
Transient Uncooled Targets / 6.2.1.4:
Transient Uncooled Gages / 6.2.1.5:
Radiant Heat Flux / 6.2.2:
Heat Flux Gage / 6.2.2.1:
Ellipsoidal Radiometer / 6.2.2.2:
Spectral Radiometer / 6.2.2.3:
Other Techniques / 6.2.2.4:
Convective Heat Flux / 6.2.3:
Temperature / 6.3:
Gas Temperature / 6.3.1:
Suction Pyrometer / 6.3.1.1:
Optical Techniques / 6.3.1.2:
Fine Wire Thermocouples / 6.3.1.3:
Line Reversal / 6.3.1.4:
Surface Temperature / 6.3.2:
Embedded Thermocouple / 6.3.2.1:
Infrared Detectors / 6.3.2.2:
Gas Flow / 6.4:
Gas Velocity / 6.4.1:
Pitot Tubes / 6.4.1.1:
Laser Doppler Velocimetry / 6.4.1.2:
Static Pressure Distribution / 6.4.1.3:
Stagnation Velocity Gradient / 6.4.2.1:
Stagnation Zone / 6.4.2.2:
Gas Species / 6.5:
Other Measurements / 6.6:
Physical Modeling / 6.7:
Flame Impingement / Chapter 7:
Experimental Conditions / 7.1:
Configurations / 7.2.1:
Flame Normal to a Cylinder in Crossflow / 7.2.1.1:
Flame Normal to a Hemispherically Nosed Cylinder / 7.2.1.2:
Flame Normal to a Plane Surface / 7.2.1.3:
Flame Parallel to a Plane Surface / 7.2.1.4:
Operating Conditions / 7.2.2:
Oxidizers / 7.2.2.1:
Fuels / 7.2.2.2:
Equivalence Ratios / 7.2.2.3:
Firing Rates / 7.2.2.4:
Reynolds Number / 7.2.2.5:
Nozzle Diameter / 7.2.2.6:
Location / 7.2.2.8:
Stagnation Targets / 7.2.3:
Size / 7.2.3.1:
Target Materials / 7.2.3.2:
Surface Preparation / 7.2.3.3:
Surface Temperatures / 7.2.3.4:
Measurements / 7.2.4:
Semianalytical Heat Transfer Solutions / 7.3:
Equation Parameters / 7.3.1:
Thermophysical Properties / 7.3.1.1:
Sibulkin Results / 7.3.1.2:
Fay and Riddell Results / 7.3.2.2:
Rosner Results / 7.3.2.3:
Comparisons With Experiments / 7.3.3:
Forced Convection (Negligible TCHR) / 7.3.3.1:
Forced Convection with TCHR / 7.3.3.2:
Sample Calculations / 7.3.4:
Laminar Flames Without TCHR / 7.3.4.1:
Turbulent Flames Without TCHR / 7.3.4.2:
Laminar Flames with TCHR
Summary / 7.3.5:
Empirical Heat Transfer Correlations / 7.4:
Flames Impinging Normal to a Cylinder / 7.4.1:
Local Convection Heat Transfer / 7.4.2.1:
Average Convection Heat Transfer / 7.4.2.2:
Average Convection Heat Transfer with TCHR / 7.4.2.3:
Average Radiation Heat Transfer / 7.4.2.4:
Maximum Convection and Radiation Heat Transfer / 7.4.2.5:
Flames Impining Normal to a Hemi-Nosed Cylinder / 7.4.3:
Local Convection Heat Transfer with TCHR / 7.4.3.1:
Flames Impinging Normal to a Plane Surface / 7.4.4:
Flames Parallel to a Plane Surface / 7.4.4.1:
Local Convection Heat Transfer With TCHR / 7.4.5.1:
Local Convection and Radiation Heat Transfer / 7.4.5.2:
Heat Transfer from Burners / Chapter 8:
Open-Flame Burners / 8.1:
Momentum Effects / 8.2.1:
Flame Luminosity / 8.2.2:
Firing Rate Effects / 8.2.3:
Flame Shape Effects / 8.2.4:
Radiant Burners / 8.3:
Perforated Ceramic or Wire Mesh Radiant Burners / 8.3.1:
Flame Impingement Radiant Burners / 8.3.2:
Porous Refractory Radiant Burners / 8.3.3:
Advanced Ceramic Radiant Burners / 8.3.4:
Radiant Wall Burners / 8.3.5:
Radiant Tube Burners / 8.3.6:
Effects on Heat Transfer / 8.4:
Fuel Effects / 8.4.1:
Solid Fuels / 8.4.1.1:
Liquid Fuels / 8.4.1.2:
Gaseous Fuels / 8.4.1.3:
Fuel Temperature / 8.4.1.4:
Oxidizer Effects / 8.4.2:
Oxidizer Temperature / 8.4.2.1:
Staging Effects / 8.4.3:
Fuel Staging / 8.4.3.1:
Oxidizer Staging / 8.4.3.2:
Burner Orientation / 8.4.4:
Hearth-Fired Burners / 8.4.4.1:
Wall-Fired Burners / 8.4.4.2:
Roof-Fired Burners / 8.4.4.3:
Side-Fired Burners / 8.4.4.4:
Heat Recuperation / 8.4.5:
Regenerative Burners / 8.4.5.1:
Recuperative Burners / 8.4.5.2:
Furnace or Flue Gas Recirculation / 8.4.5.3:
Pulse Combustion / 8.4.6:
In-Flame Treatment / 8.5:
Heat Transfer in Furnaces / Chapter 9:
Furnaces / 9.1:
Firing Method / 9.2.1:
Direct Firing / 9.2.1.1:
Indirect Firing / 9.2.1.2:
Heat Distribution / 9.2.1.3:
Load Processing Method / 9.2.2:
Batch Processing / 9.2.2.1:
Continuous Processing / 9.2.2.2:
Hybrid Processing / 9.2.2.3:
Heat Transfer Medium / 9.2.3:
Gaseous Medium / 9.2.3.1:
Vacuum / 9.2.3.2:
Liquid Medium / 9.2.3.3:
Solid Medium / 9.2.3.4:
Rotary Geometry / 9.2.4:
Rectangular Geometry / 9.2.4.2:
Ladle Geometry / 9.2.4.3:
Vertical Cylindrical Geometry / 9.2.4.4:
Furnace Types / 9.2.5:
Reverberatory Furnace / 9.2.5.1:
Shaft Kiln / 9.2.5.2:
Rotary Furnace / 9.2.5.3:
Heat Recovery / 9.3:
Gas Recirculation / 9.3.1:
Flue Gas Recirculation / 9.3.3.1:
Furnace Gas Recirculation / 9.3.3.2:
Lower Temperature Applications / Chapter 10:
Ovens and Dryers / 10.1:
Predryer / 10.2.1:
Dryer / 10.2.2:
Fired Heaters / 10.3:
Reformer / 10.3.1:
Process Heater / 10.3.2:
Heat Treating / 10.4:
Standard Atmosphere / 10.4.1:
Special Atmosphere / 10.4.2:
Higher Temperature Applications / Chapter 11:
Industries / 11.1:
Metals Industry / 11.2:
Ferrous Metal Production / 11.2.1:
Electric Arc Furnace / 11.2.1.1:
Smelting / 11.2.1.2:
Ladle Preheating / 11.2.1.3:
Reheating Furnace / 11.2.1.4:
Forging / 11.2.1.5:
Aluminum Metal Production / 11.2.2:
Minerals Industry / 11.3:
Glass / 11.3.1:
Types of Traditional Glass-Melting Furnaces / 11.3.1.1:
Unit Melter / 11.3.1.2:
Recuperative Melter / 11.3.1.3:
Regenerative or Siemens Furnace / 11.3.1.4:
Oxygen-Enhanced Combustion for Glass Production / 11.3.1.5:
Advanced Techniques for Glass Production / 11.3.1.6:
Cement and Lime / 11.3.2:
Bricks, Refractories, and Ceramics / 11.3.3:
Waste Incineration / 11.4:
Types of Incinerators / 11.4.1:
Municipal Waste Incinerators / 11.4.1.1:
Sludge Incinerators / 11.4.1.2:
Mobile Incinerators / 11.4.1.3:
Transportable Incinerators / 11.4.1.4:
Fixed Hazardous Waste Incinerators / 11.4.1.5:
Heat Transfer in Waste Incineration / 11.4.2:
Advanced Combustion Systems / Chapter 12:
Oxygen-Enhanced Combustion / 12.1:
Typical Use Methods / 12.2.1:
Air Enrichment / 12.2.1.1:
O[subscript 2] Lancing / 12.2.1.2:
Oxy/Fuel / 12.2.1.3:
Air-Oxy/Fuel / 12.2.1.4:
Heat Transfer Benefits / 12.2.2:
Increased Productivity / 12.2.3.1:
Higher Thermal Efficiencies / 12.2.3.2:
Higher Heat Transfer Efficiency / 12.2.3.3.:
Increased Flexibility / 12.2.3.4:
Potential Heat Transfer Problems / 12.2.4:
Refractory Damage / 12.2.4.1:
Nonuniform Heating / 12.2.4.2:
Industrial Heating Applications / 12.2.5:
Metals / 12.2.5.1:
Minerals / 12.2.5.2:
Incineration / 12.2.5.3:
Other / 12.2.5.4:
Submerged Combustion / 12.3:
Metals Production / 12.3.1:
Minerals Production / 12.3.2:
Liquid Heating / 12.3.3:
Miscellaneous / 12.4:
Surface Combustor-Heater / 12.4.1:
Direct-Fired Cylinder Dryer / 12.4.2:
Appendices
Reference Sources for Further Information / Appendix A:
Common Conversions / Appendix B:
Methods of Expressing Mixture Ratios for CH[subscript 4], C[subscript 3]H[subscript 8], and H[subscript 2] / Appendix C:
Properties for CH[subscript 4], C[subscript 3]H[subscript 8], and H[subscript 2] Flames / Appendix D:
Fluid Dynamics Equations / Appendix E:
Material Properties / Appendix F:
Author Index
Subject Index
Introduction / Chapter 1:
Importance of Heat Transfer in Industrial Combustion / 1.1:
Energy Consumption / 1.1.1:
2.

図書

図書
Massoud Kaviany
出版情報: New York : Springer, c2001  xxvi, 707 p. ; 25 cm
シリーズ名: Mechanical engineering series
所蔵情報: loading…
3.

図書

図書
JAI guest editors, Phalguni Mukhopadhyaya, Mavinkal K. Kumaran
出版情報: West Conshohocken, Pa. : ASTM International, c2010  viii, 434 p. ; 23 cm
シリーズ名: Journal of ASTM international selected technical papers ; 1519. Heat-air-moisture transport ; v. 2
所蔵情報: loading…
4.

図書

図書
organized by the Energy Transfer and Thermofluid Mechanics Group of the Institution of Mechanical Engineers (IMechE) ; sponsored by The Energy Efficiency Best Practice Programme ... [et al.] ; with the support of IChemE ... [et al.]
出版情報: Bury St. Edmunds : Professional Engineering Publ. for The Institution of Mechanical Engineers, 1999  510 p ; 24 cm
シリーズ名: IMechE conference transactions ; 1999-7
所蔵情報: loading…
5.

図書

図書
A.F. Mills
出版情報: Upper Saddler River, N.J. : Prentice Hall, c1999  xxiii, 1000 p. ; 25 cm
所蔵情報: loading…
6.

図書

図書
Gang Chen
出版情報: New York : Oxford University Press, c2005  xxiii, 531 p. ; 25 cm
シリーズ名: MIT-Pappalardo series in mechanical engineering
所蔵情報: loading…
7.

図書

図書
Massoud Kaviany
出版情報: New York : Cambridge University Press, 2008  xxi, 661 p. ; 27 cm
所蔵情報: loading…
8.

図書

図書
P. Mukhopadhyaya and M. K. Kumaran, editors
出版情報: West Conshohocken, PA : ASTM, c2007  [vii], 111 p. ; 23 cm
シリーズ名: ASTM special technical publication ; 1495
所蔵情報: loading…
9.

図書

図書
O. Krischer
出版情報: Berlin : Springer, 1956  xix, 400 p. ; 24 cm
シリーズ名: Trocknungstechnik / von O. Krischer and K. Kröll ; Bd. 1
所蔵情報: loading…
10.

図書

図書
edited by S. Kakaç ... [et al.]
出版情報: Dordrecht : Kluwer Academic Publishers, 1999  x, 676 p. ; 25 cm
シリーズ名: NATO science series ; General sub-series E, Applied sciences ; 355
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼