close
1.

図書
図書
1. Fracture, design analysis of pressure vessels, heat exchangers, piping components, and fitness for service, 1999 : presented at the 1999 ASME Pressure Vessels and Piping Conference, Boston, Massachusetts, August 1-5, 1999
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, Kenneth K. Yoon ; contributing editors, Surender Bhandari ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  vii, 428 p. ; 28 cm
シリーズ名: PVP ; v. 388
所蔵情報: loading…
目次情報: 続きを見る
Fracture Mechanics Analysis
Introduction / Kenneth K. Yoon ; Surender Bhandari
Stress Intensity Factors for External Circumferential Cracks in Tubes Over a Wide Range of Radius Over Thickness Ratios / S. Chapuliot ; M. H. Lacire
Stress Intensity Factors of Through Wall Cracks in Plates and Tubes With Circumferential Cracks / S. Marie
Fracture Prediction of Hole Patterns With Multiple Cracks Using the Finite Element Method / Elvin B. Shields
Proposal of a Simplified Methodology to Determine J in a Cracked Tee Junction / M. Nedelec
Simplified Method to Determine J for Cracked Pipes With Misalignment / B. Drubay
Three-Dimensional Analyses of Shallow Subclad Flaws in a PWR Vessel Submitted to a Severe Overcooling Transient / D. Moinereau ; G. Bezdikian ; C. Faidy
Evaluation of Thermal Stratification in PWR Pressurizers / Mark A. Gray ; E. Lyles Cranford, III
Thermal Hydraulics and Fracture Mechanics Analysis of a Small Break Loss of Coolant Accident in the French CP0-Type Reactor Pressure Vessel ntegrity Assessment / Elisabeth Keim ; Roland Hertlein ; Stefan Fricke ; Albert Schopper ; Francoise Ternon-Morin ; Georges Bezdikian
Revisiting the Integrated Pressurized Thermal Shock Studies of an Aging Pressurized Water Reactor / Terry L. Dickson ; Shah N. M. Malik ; John W. Bryson ; Fred A. Simonen
Analysis of Underclad Cracks in a PWR Reactor Pressure Vessel / S. Bhandari ; M.-P. Valeta
Numerical Fracture Analysis of Hoop Wrap Composite Gas Cylinders Containing Deep Crack in the Metal Liners / Gouri S. Bhuyan ; Bin Su
Structural Integrity of Fillet Welds for PV Brackets and Attachments / T. G. F. Gray ; D. Mackenzie ; A. Heaton
The Limit-Load Solution for a Thick-Wall Pipe With a Circumferential Crack Under Combined Tension and Bending Loads / Simon C. F. Sheng
The Effect of Adjusted Reference Temperature on the Probability of Failure in Boiling Water Reactor Vessel Welds / Shu S. Tang ; Peter C. Riccardella ; Marcos L. Herrera ; Robert Carter ; Dana Covill ; Larry Steinert
Scatter Analysis of RT[subscript NDT] Shift Results in French RPV Surveillance Programme Data Base / Y. Grandjean ; C. Brillaud ; F. De Keroulas
Fracture Mechanics Analysis of Pressure Vessel Constructions Containing Built-In Annular Cracks / John W. Price ; Andrei G. Kotousov ; Brian B. Kerezsi
Contribution of Probabilistic Fracture Mechanics Methods to the Assessment of RPV Integrity / E. Meister ; M. Persoz
An Analytical Approach for Calculating KIC From Eccentrically Cracked Cylindrical Specimens / Raafat N. Ibrahim
Simplified Model Tests of SUS304 Stainless Steel for an Alternate Approach to Creep-Fatigue Damage Evaluation of HIgh Temperature Structural Design / K. Kobatake ; H. Ohta ; H. Ishiyama ; O. Ueno
The Prediction of Creep Failure in Notched Tubes Using Continuum Damage Mechanics / Ju-Shin Hsiao ; Thomas B. Gibbons
NESC-I Project: Progress Since the Spinning Cylinder Test / Roger C. Hurst ; Darren P. McGarry ; Nigel G. Taylor ; John B. Wintle
Evaluation of the Crack Tip Stress Distribution Considering Constraint Effects in Pressure Vessel / J. B. Choi ; J. S. Kim ; Y. J. Kim ; S. N. Choi ; K. S. Jang
Design Analysis of Pressure Vessels, Heat Exchangers, and Components
On Using Finite Element Analysis for Pressure Vessel Design / Dennis H. Martens ; Michael A. Porter ; Pedro Marcal
Evaluation of Plastic Strain Concentration in Bellows / Charles Becht IV
Innovations in Delayed Coking Coke Drum Design / Leslie P. Antalffy ; Coby W. Stewart ; David W. Malek ; Bob Grimsley ; Jeffrey A. Pfeifer ; Ron Shockley
Results of FEA Analyses at Nozzle/Shell Junctions Subjected to External Loads / Steven R. Massey ; Charlie S. Hsieh ; Willen N. Van Riet
A Suggested Evaluation Procedure for Shell/Plate Element Finite Element Nozzle Models / S. M. Caldwell
Numerical Approach of Coupled Fluid-Solid Thermal Phenomena: Application to Power Plant Piping Systems / Christophe Peniguel ; Isabelle Rupp
Limit Loads of Orthotropic Structures Using the R-Node Method / S. P. Mangalaramanan ; R. Seshadri ; W. Reinhardt
Design and Development of a Composite Dome for Experimental Characterization of Material Permeability / Hector Estrada ; Stanley S. Smeltzer, III
Dynamic Equilibrium Equations of Nonprismatic Beams Having Different Bending Behaviors / Chang-New Chen
Design and Analysis of Piping and Components
Effect of Internal Pressure on Elastic-Plastic Behavior of Pipe Elbows Under In-Plane Bending Moments / Allan B. Glickstein ; Mohab A. Shalaby ; Maher Y. A. Younan
The Study of Closely Spaced Fillet Welds Under Moment Loading / Alan B. Glickstein ; Thomas C. Roes
Localized Strains in the Welding Region of Back-to-Back Thin Walled Elbows Under In-Plane Moments / James F. McCabe ; Joon W. Oh
Design of Flanged Joints Subjected to Pressure and External Loads / Charles S. Hsieh
Buckling of a Toroidal Shell Using the Differential Quadrature Method / David Redekop ; Bo Xu
Spring Rates for Low Type Nozzles in API 650 Tanks / Manfred Lengsfeld ; Kanhaiya L. Bardia ; Jaan Taagepera ; Kanajett Hathaitham
Stress Factors for Low Type Nozzles in API 650 Tanks
Design and Simulation of a Three Dimensional Detonation Facility / Charles A. Lind ; Jay P. Boris ; Elaine S. Oran
Application of Reliability Methods to a Piping Vibratory Fatigue Problem / Simon Cambier ; Pascal Guihot ; Gerard Coffignal
Stress Indices for Feeder Pipe Bends Based on Finite Element Analysis / Tao Liu ; Rajnish Kumar ; Mohammad A. Saleem ; S. A. (Aman) Usmani
Fitness for Service and Life Evaluation
Weld Repair of Steam Turbine Casings and Piping: An Industry Survey / W. J. Koves ; David W. Gandy ; Shane J. Findlan ; R. Viswanathan
Remaining Life Assessment of Refinery Heater Tubes / D. S. Kim ; H. E. Mead
Fitness for Service Evaluation of Ring Joint Groove Cracking / R. G. Brown ; G. M. Buchheim ; D. A. Osage ; J. L. Janelle
Weld Repair of 1-1/4Cr-1/2Mo Steel Piping Girth Welds / D. Gandy ; S. Findlan
Weld Repair of Aged Cr-Mo Steel Piping: A Review of Literature
Calculation of Stress Relaxation Properties for Type 422 Stainless Steel / F. V. Ellis ; Sebastian Tordonato
Methodology for Durability Analysis of HDPE Pipe / A. Chudnovsky ; K. Sehanobish ; S. Wu
Structural Requirements for the In-Service Inspection of Eroded/Corroded Piping / Paul E. Schlenker ; Kevin M. Lassahn
A New Energetic Approach to Model Ductile Tearing for Real Components / G. Bezine
Author Index
Fracture Mechanics Analysis
Introduction / Kenneth K. Yoon ; Surender Bhandari
Stress Intensity Factors for External Circumferential Cracks in Tubes Over a Wide Range of Radius Over Thickness Ratios / S. Chapuliot ; M. H. Lacire
2.

図書
図書
2. Fracture, fatigue, and weld residual stress : presented at the 1999 ASME Pressure Vessels and Piping Conference, Boston, Massachusetts, August 1-5, 1999
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, J. Pan ; contributing editors, M. T. Kirk ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1999  vii, 345 p. ; 28 cm
シリーズ名: PVP ; v. 393
所蔵情報: loading…
目次情報: 続きを見る
Application of the Master Curve to Assessment of Nuclear Reactor Pressure Vessels
Introduction / Mark Kirk ; Ken Yoon
Application of the Master Curve Method to Crack Initiation and Crack Arrest / Kim Wallin
Cleavage Fracture in Surface Cracked Plates: Experiments and Numerical Predictions / Xiaosheng Gao ; Robert H. Dodds ; Robert L. Tregoning ; James A. Joyce ; Rick E. Link
Statistical Versus Constraint Size Effects on the Transition Regime Toughness: A Preliminary Study of a Pressure Vessel Steel / H. J. Rathbun ; G. R. Odette ; M. Y. He ; G. E. Lucas ; J. W. Sheckherd
A Physical Basis for the Master Curve / Marjorie Natishan
Experimental Validation Work to Prove the Master Curve Concept / D. E. McCabe ; M. A. Sokolov
On the Use of the Master Curve Based on the Precracked Charpy Specimen / Rachid Chaouadi ; Marc Scibetta ; Eric van Walle ; Robert Gerard
Accuracy in the T[subscript o] Determination: Numerical Versus Experimental Results / Carlos A. J. Miranda ; Arnaldo H. P. Andrade ; John D. Landes ; Donald E. McCabe ; Ronald L. Swain
Development of the T[subscript o] Reference Temperature From Precracked Charpy Specimens
Effect of Loading Rate on Fracture Toughness of Pressure Vessel Steels / K. K. Yoon ; W. A. Van Der Sluys ; K. Hour
Initial Reference Temperatures and Irradiation Trend Curves for Use With RT[subscript To]: A Preliminary Assessment / Randy Lott ; William Server ; Stan Rosinski
Application of Master Curve Technology to Estimation of End of License Adjusted Reference Temperature for a Nuclear Power Plant / Charlie Kim ; Chuck Tomes ; James Williams
Fracture Mechanics: Theory and Applications
Determination of Fracture Mechanics Characteristics: Initiation or Instability Characteristics as a Basis for Components Assessment / Yuh J. Chao ; E. Roos ; U. Eisele
The Effect of Residual Stresses on Crack Extension When Expressed in the K[subscript r]-L[subscript r] Format / E. Smith
Life Estimation of Creep Crack Propagation in Aged Power Plant Pipes Using the Engineering Approach / Shiro Kubo ; Masashige Yoshikawa ; Kiyotsugu Ohji
Variation of Fracture Toughness With Constraint of PMMA Specimens / Shu Liu ; Bart J. Broviak
Fracture Mechanics Evaluation for and Evolutionary Development of the Break Preclusion Concept / K.-H. Herter
Mechanical Properties for Fracture Analysis of Mild Steel Storage Tanks / R. L. Sindelar ; P. S. Lam ; G. R. Caskey, Jr. ; L. Y. Woo
J-Integral Based Flaw Stability Analysis of Mild Steel Storage Tanks / P.-S. Lam
Efficient and Reliable Analysis of Structural Collapse by Using a Differential Quadrature Finite Element Method Along With a Global Secant Relaxation-Based Accelerated Equilibrium Iteration Procedure / Chang-New Chen
Piping Fracture Mechanics
Consideration of Internal Pressure on Pipe Flaw Evaluation Criteria Based on a New J-Estimation Scheme for Combined Loading / G. M. Wilkowski ; Naoki Miura ; Yeon-Ki Chung
The Opening Area Associated With a Crack That is Subjected to a General Tensile Stress Distribution
Limit Analysis for Pressurized Pipelines With Local Wall-Thinning / Lianghao Han ; Yinpei Wang ; Cengdian Liu
Weld Residual Stresses And Effects on Fracture/Fatigue
Residual Stress Simulation Incorporating Weld HAZ Microstructure / Pingsha Dong ; Lubomir Junek ; Marek Slovacek ; Vladislav Magula ; Vladislav Ochodek
On the Validation of the Models Related to the Prevision of the HAZ Bahaviour / Y. Vincent ; J. F. Jullien ; N. Cavallo ; L. Taleb ; V. Cano ; S. Taheri ; Ph. Gilles
Residual Stress Analysis and Fracture Assessment of Weld Joints in Moment Frames / Jinmiao Zhang ; Frederick W. Brust
Thermo-Mechanical Modeling of Residual Stress and Distortion During Welding Process / Yuh-Jin Chao ; Xinhai Qi
Study of the Material Properties of Thin Pipe Butt Welds (In C-Mn and Stainless Steel) on the Welding Residual Stress Distribution by Using Numerical Simulation / J. J. Janosch ; D. Lawrjaniec
Welding Residual Stresses With Magnitudes Lower Than the Material Yield Strength / Kyle Koppenhoefer ; William Mohr ; J. Robin Gordon
A Finite Element Evaluation of Residual Stress in a Thread Form Generated by a Cold-Rolling Process / John A. Martin
Residual Stresses in Inconel-718 Clad Tungsten Rods Subject to Hot Iso-Static Pressing / Ronnie B. Parker ; Partha Rangaswamy
An Investigation Into the Residual Stresses in an Aluminium 2024 Test Weld / Robin V. Preston ; Simon D. Smith ; Hugh R. Shercliff ; Philip J. Withers
Residual Stress in Transient Zones of a High Vacuum Tube / Kent K. Leung
Influence of Heating Conditions on Temperature Distribution During Local PWHT / Yukihiko Horii ; Jinkichi Tanaka ; Masanobu Sato ; Hidekazu Murakawa ; Jianhua Wang
Determination of Critical Heated Band Width During Local PWHT by Creep Analysis
Classical and Emerging Fracture Mechanics Parameters for History Dependent Fracture With Application to Weld Fracture
Micro- and Macroscopic Fracture Behavior of Heat-Affected Zone in Multi-Pass Welded Cryogenic Steel / Jae-II Jang ; Young-chul Yang ; Woo-sik Kim ; Dongil Kwon
Weldment Residual Stresses in a Hydrocarbon Outlet Valve of a Catofin Reactor / German Crespo ; Zulay Cassier
Influence of the Welding Variables on the Mechanical Properties in Butt Joints for Aluminum 6063-T5 / Maria Carolina Payares ; Minerva Dorta ; Patricia Munoz-Escalona
Author Index
Application of the Master Curve to Assessment of Nuclear Reactor Pressure Vessels
Introduction / Mark Kirk ; Ken Yoon
Application of the Master Curve Method to Crack Initiation and Crack Arrest / Kim Wallin
3.

図書
図書
3. Pressure vessels and piping codes and standards : presented at the 1996 ASME Pressure Vessels and Piping Conference, Montreal, Quebec, Canada, July 21-26, 1996 (v. 1 ; v. 2)
sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, T.C. Esselman ; contributing editors, T.M. Adams ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1996  2 v. ; 28 cm
シリーズ名: PVP ; vol. 338-339
所蔵情報: loading…
4.

図書
図書
4. Pressure vessels and components - 1991 (including bolted joints, valves, and high pressure)
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME ; principal editor, G.N. Brooks ; contributing editors, E.L. Danfelt ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vi, 233 p. ; 28 cm
シリーズ名: PVP ; vol. 217
所蔵情報: loading…
5.

図書
図書
5. NDE: applications, advanced methods, and codes and standards
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME, Nondestructive Evaluation Engineering Division, ASME ; coordinating editor, R.N. Pangborn ; condtributing editors, D.E. Bray ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vii, 73 p. ; 28 cm
シリーズ名: PVP ; vol. 216
NDE ; vol. 9
所蔵情報: loading…
6.

図書
図書
6. Fatigue, fracture, and risk - 1991
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME ; edited by W.H. Bamford ; contributing editors, T.A. Meyer ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vi, 201 p. ; 28 cm
シリーズ名: PVP ; vol. 215
所蔵情報: loading…
7.

図書
図書
7. Flow-induced vibration and wear - 1991
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME ; edited by M.K. Au-Yang, F. Hara
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  v, 147 p. ; 28 cm
シリーズ名: PVP ; vol. 206
所蔵情報: loading…
8.

図書
図書
8. Structural dynamics produced by extreme loading conditions 1991
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME ; edited by J.D. Colton, Y.S. Shin
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  v, 65 p. ; 28 cm
シリーズ名: PVP ; vol. 207
所蔵情報: loading…
9.

図書
図書
9. Power plant systems/components aging management and life extension - 1991
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME ; edited by J. Sinnappan ... [et al]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  vi, 221 p. ; 28 cm
シリーズ名: PVP ; vol. 208
所蔵情報: loading…
10.

図書
図書
10. Computer graphics and database management 1991
presented at the 1991 Pressure Vessels and Piping Conference, San Diego, California, June 23-27, 1991 ; sponsored by the Pressure Vessels and Piping Division, ASME ; edited by James F. Cory, Jr. ... [et al.]
出版情報: New York, N.Y. : American Society of Mechanical Engineers, c1991  v, 75 p. ; 28 cm
シリーズ名: PVP ; vol. 209
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼