close
1.

図書
図書
1. Materials and processes
by Max Kohn and Martin J. Starfield
出版情報: New York : Macmillan, c1952  483 p. ; 22 cm
所蔵情報: loading…
2.

図書
図書
2. Advanced materials and technologies IV : special topic volume with invited peer reviewed papers only (: pbk)
edited by Stanislav Kolisnychenko
出版情報: Baech : Trans Tech Publications, c2020  104 p. ; 24 cm
シリーズ名: Advanced materials research ; v. 1156
所蔵情報: loading…
目次情報: 続きを見る
Effect of Temperature, Strain and Strain Rate on Efficiency of Power Dissipation during Hot Deformation of Fe-28Ni-17Co-11.5Al-2.5Ta-0.05B (at. %) Shape Memory Alloy Using Taguchi Method / S.H. Adarsh; Vedamanickam Sampath
Effect of Inconel 625 on Microstructure and Mechanical Properties of Gas Tungsten Arc Welded Inconel-713LC Superalloy Joints / Yu Chih Tzeng; Chih Ting Wu
Study on Deformation-Induced Pearlite Transformation in Vanadium Microalloyed Eutectoid Steel / Cai Zhen; Xin Ping Mao; Si Qian Bao; Gang Zhao
Investigation on Microstructure Evolution and Strengthening Mechanism in Boron-Bearing Advanced High Strength Steel / Tao Jia; Jie Li; Li Ma
A Scenario on Dry-WEDM and WEDM for Industrial Applications / Ganesh Gowthaman; S. Jeyakumar; B.A. Saravanan
Thermal Buckling of Functionally Graded Sandwich Beams / Ahmed Amine Daikh; Mohamed Guerroudj; Mohamed El Adjrami; Abdelkader Megueni
Preparation and Characterization of Polypropylene and Unsaturated Polyester Resin Filled with Jute Fiber / Kamrun N. Keya; Nasrin A. Kona; Md. Sahadat Hossain; Md. Razzak; Md. Naimul Islam; Ruhul A. Khan
Studies on the Mechanical Characterization of Jute Fiber Reinforced Unsaturated Polyester Resin Based Composites: Effect of Weave Structure and Yarn Density / Kamrun N. Keya; Nasrin A. Kona; Ruhul A. Khan
Development of Methodology for Determining the Physical Properties of Natural and Innovative Materials / Rodrigo Spinelli; Pedro Henrique Dall'Agnol Pasquali; Angélica Bertotti; Dantara Lerin; Alana F. Pitol; Faustino Patiño-Cambeiro; Odorico Konrad
The Effect of Andreasen #769;s Packing Distribution Modulus on the Physical and Mechanical Properties of a Low Cement Refractory Castable / Vitoria Gabrieli Malimpensa; José Antonio Alves Júnior; João Baptista Baldo
Effect of Temperature, Strain and Strain Rate on Efficiency of Power Dissipation during Hot Deformation of Fe-28Ni-17Co-11.5Al-2.5Ta-0.05B (at. %) Shape Memory Alloy Using Taguchi Method / S.H. Adarsh; Vedamanickam Sampath
Effect of Inconel 625 on Microstructure and Mechanical Properties of Gas Tungsten Arc Welded Inconel-713LC Superalloy Joints / Yu Chih Tzeng; Chih Ting Wu
Study on Deformation-Induced Pearlite Transformation in Vanadium Microalloyed Eutectoid Steel / Cai Zhen; Xin Ping Mao; Si Qian Bao; Gang Zhao
3.

図書
図書
3. Carbon materials : science and applications (: [hardback])
Deborah D.L. Chung
出版情報: Singapore : World Scientific, c2019  xiii, 367 p. ; 24 cm
シリーズ名: Engineering materials for technological needs ; v. 3
所蔵情報: loading…
目次情報: 続きを見る
Preface
Introduction to carbon materials / 1：
Introduction / 1.1：
Graphite / 1.1.1：
Diamond / 1.1.2：
Fullerene / 1.1.3：
The graphite family / 1.2：
Graphite and turbostratic carbon / 1.2.1：
Carbon fibers and nanofibers / 1.2.2：
Carbon nanotubes / 1.2.3：
Intercalated graphite / 1.2.4：
Graphite oxide / 1.2.5：
Exfoliated graphite / 1.2.6：
Flexible graphite / 1.2.7：
Graphene / 1.2.8：
Activated carbon / 1.2.9：
Carbon black / 1.2.10：
Carbon-carbon composites / 1.2.11：
The diamond family / 1.3：
Diamond-like carbon / 1.3.1：
Graphane
The fullerene family / 1.4：
References
Structure of graphite and carbon in the graphite family / 2：
Fabrication of graphite / 2.2：
Polycrytalline graphite / 2.2.1：
Graphite flakes / 2.2.2：
Pyrolytic graphite / 2.2.3：
Properties of graphite / 2.3：
Reciprocal lattice / 2.4：
Electronic energy bands / 2.5：
Magnetic energy levels / 2.6：
Electrical properties / 2.7：
Lattice vibrations / 2.8：
Graphite intercalation compounds / 2.9：
Classification of graphite intercalation compounds / 2.9.1：
Covalent intercalation compounds / 2.9.2：
Graphite oxide (graphitic acid) / 2.9.2.1：
Carbon monofluoride (graphite monofluoride) / 2.9.2.2：
Tetracarbon monofluoride / 2.9.2.3：
Ionic intercalation compounds / 2.9.3：
Graphite-halogens / 2.9.3.1：
Graphite-alkali metals / 2.9.3.2：
Graphite-acid compounds / 2.9.3.3：
Graphite-halide compounds / 2.9.3.4：
Intercalated graphite fibers / 2.9.4：
Structure and formation / 2.10：
Viscoelastic and elastomeric properties / 2.10.2：
Dielectric properties / 2.10.3：
Thermal and electrical conductivities / 2.10.4：
Adsorption and filtration behavior / 2.10.5：
Electronic structure of graphene / 2.11：
Optical behavior / 3.3：
Defects in graphene / 3.4：
Mechanical behavior / 3.5：
Preparation of graphene / 3.6：
Preparation of graphene by the cleavage of graphite / 3.6.1：
Preparation of graphene by the mechanical disintegration of intercalated graphite / 3.6.2：
Preparation of graphene by the chemical reduction of graphene oxide / 3.6.3：
Preparation of graphene by nonoxidizing liquid exfoliation / 3.6.4：
Preparation of graphene by chemical vapor deposition / 3.6.5：
Graphene yarns / 3.7：
Graphene paper / 3.8：
Graphene foam / 3.9：
Graphene ink / 3.10：
Graphene quantum dots / 3.11：
Doping of graphene / 3.12：
Hybrids of graphene and carbon nanotubes / 3.13：
Hybrids of graphene and carbon fibers / 3.14：
Hybrids of graphene and electrochemical electrode materials / 3.15：
Fabrication / 4：
Structure / 4.3：
Squish ability and compaction / 4.4：
Application in thermal interface materials / 4.5：
Application as an electrically conductive additive / 4.6：
Dielectric behavior / 4.7：
Viscoelastic behavior / 4.8：
Nanoindentation behavior / 4.8.1：
Dynamic mechanical properties / 4.8.2：
Carbon black composites / 4.9：
Competing materials / 4.10：
Market and applications / 4.11：
Structure of activated carbon / 5：
Adsorption / 5.2：
Forms of activated carbon / 5.3：
Granular activated carbon / 5.3.1：
Powdered activated carbon / 5.3.2：
Extruded activated carbon / 5.3.3：
Bead activated carbon / 5.3.4：
Activated carbon assemblies / 5.4：
Honeycomb carbon filters / 5.4.1：
Activated carbon blocks with hollow channels / 5.4.2：
Activated carbon foam / 5.4.3：
Activated carbon foam assemblies / 5.4.4：
Activated carbon fiber fabric / 5.4.5：
Activated carbon composites / 5.4.6：
Fabrication of activated carbon / 5.5：
Steam activation / 5.5.1：
Gas activation / 5.5.2：
Chemical activation / 5.5.3：
Regeneration of activated carbon / 5.6：
Processing-structure-properly relationships of activated carbon / 5.7：
Applications of activated carbon / 5.8：
Water purification / 5.8.1：
Air purification / 5.8.2：
Gas purification / 5.8.3：
Waste treatment / 5.8.4：
Carbon dioxide capture / 5.8.5：
Heat pumps and refrigeration / 5.8.6：
Electrochemical components / 5.8.7：
Catalyst support / 5.8.8：
Market of activated carbon / 5.9：
Carbon fibers / 6：
Applications and market / 6.1：
Continuous fiber assemblies / 6.3：
Discontinuous fibers / 6.4：
Microstructure / 6.5：
Continuous carbon fibers vs. other materials / 6.6：
Carbon fiber composites / 6.8：
Carbon nanofibers and nanotubes / 7：
Structure of carbon nanofibers and nanotubes / 7.1：
Properties of carbon nanofibers and nanotubes / 7.3：
Mats and yams of CNFs/CNTs / 7.4：
Mats / 7.4.1：
Fabrication of mats / 7.4.1.1：
Electrical and electromagnetic behavior of mats / 7.4.1.2：
Mechanical behavior of mats / 7.4.1.3：
Electrochemical behavior of mats / 7.4.1.4：
Yarns / 7.4.2：
Fabrication of yarns / 7.4.2.1：
Mechanical behavior of yarns / 7.4.2.2：
Assemblies involving CNTs/CNFs / 7.5：
Vertically aligned CNTs / 7.5.1：
CMF/CNT with filled core channel / 7.5.2：
CNFs/CNTs grown on carbon fibers / 7.5.3：
CNTs grown on carbon black / 7.5.4：
CNTs grown on graphene, reduced graphene oxide or exfoliated graphite / 7.5.5：
Carbon deposited on CNTs / 7.5.6：
CNTs grown on alumina / 7.5.7：
CNTs grown on silica fibers / 7.5.8：
CNFs grown on cordierite / 7.5.9：
CNTs grown on metals / 7.5.10：
CNTs attached to polymers / 7.5.11：
CNFs/CNTs mixed with electrochemical electrode material / 7.5.12：
Fabrication of carbon nanofibers and nanotubes / 7.6：
Fabrication of carbon nanofibers/nanotubes from carbonaceous gases / 7.6.1：
Fabrication of carbon nanofibers from electro spun polymer nanofibers / 7.6.2：
Graphitization of carbon nanofibers / 7.6.4：
Index / 7.7：
Preface
Introduction to carbon materials / 1：
Introduction / 1.1：
4.

図書
図書
4. Advanced materials and technologies V : special topic volume with invited peer-reviewed papers only (: pbk)
edited by Stanislav Kolisnychenko
出版情報: Baech : Trans Tech Publications, c2020  176 p. ; 24 cm
シリーズ名: Advanced materials research ; v. 1158
所蔵情報: loading…
目次情報: 続きを見る
Evaluation of the Effect of Cooling Conditions and Heat Transfer Coefficients on Solidification of Al-Cu Binary Alloy in Static Casting Process / Chijioke Peter Egole; Henry E. Mgbemere; Gbeminiyi M. Sobamowo; Ganiyu I. Lawal
Study of #945;"-Martensitic Transformation in Ti35NbxSn Alloys Subjected to Cryogenic Heat Treatment / Abraão Silva; Thiago Figueiredo Azevedo; Weslley Rick Viana Sampaio; Luiz Carlos Pereira; Sandro Griza
Susceptibility Study to Hydrogen Embrittlement of Welded Joints of API 5L X52 Steel in Sulphide Media / Daniel Kohls; Enori Gemelli; Laercio da Silva Filho; Majorie Anacleto Bernardo
On the Inoculation and Phase Formation of Zr47.5Cu45.5Al5Co2 and Zr65Cu15Al10Ni10 Bulk Metallic Glass Matrix Composites / Muhammad Musaddique Ali Rafique
Experimental Study of Tensile and Flexural Strength of Cottonseed Hull Reinforced Epoxy Composites / Mingyu Cho
Investigations on the Doping Effects on the Properties of Piezoelectric Ceramics / Alina Iulia Dumitru; Georgeta Velciu; Delia Patroi; Jana Pintea; Virgil Marinescu; Florentina Clicinschi; Ladislau Matekovits; Ildiko Peter
Study of Surface Roughness and MRR in Turning of SiC Reinforced Al Alloy Composite Using Taguchi Design Method, ANN and PCA Approach under MQL Cutting Condition / Md. Rezaul Karim; Rifat Ahasan Siddique; Farhana Dilwar
Earth Abundant Metals as Cost Effective Alternatives in Photocatalytic Applications: A Review / L. Legapa Nkabiti; Priscilla Gloria Lorraine Baker
Evaluation of Steel Corrosion in Concrete Structures Using Impact-Echo Method / Musab Alhawat; Amir Khan; Ashraf Ashour
Structural Design of an Auto Panel Die Component Based on the Contact Pressure Using Topology Optimization / Fatih Ko#351;ar; Kemal Yaman
Evaluation of the Effect of Cooling Conditions and Heat Transfer Coefficients on Solidification of Al-Cu Binary Alloy in Static Casting Process / Chijioke Peter Egole; Henry E. Mgbemere; Gbeminiyi M. Sobamowo; Ganiyu I. Lawal
Study of #945;"-Martensitic Transformation in Ti35NbxSn Alloys Subjected to Cryogenic Heat Treatment / Abraão Silva; Thiago Figueiredo Azevedo; Weslley Rick Viana Sampaio; Luiz Carlos Pereira; Sandro Griza
Susceptibility Study to Hydrogen Embrittlement of Welded Joints of API 5L X52 Steel in Sulphide Media / Daniel Kohls; Enori Gemelli; Laercio da Silva Filho; Majorie Anacleto Bernardo
5.

図書
図書
5. Structural chemistry : principles, methods, and case studies
Mihai V. Putz, Fanica Cimpoesu, Marilena Ferbinteanu
出版情報: Cham : Springer, c2018  xxx, 802 p. ; 25 cm
所蔵情報: loading…
6.

図書
図書
6. Materials in world perspective : assessment of resources, technologies, and trends for key materials industries (us ; gw)
D.G. Altenpohl, in collaboration with T.S. Daugherty, with contributions with by M.B. Bever ... [et al.]
出版情報: Berlin ; New York : Springer-Verlag, 1980  xv, 220 p. ; 25 cm
シリーズ名: Materials research and engineering ; v. 1
所蔵情報: loading…
7.

図書
図書
7. Structure and properties of engineering materials. 4th ed., an updated revision, broadened in scope, of the 3rd ed. of the book formerly entitled Structure and properties of alloys
Robert M. Brick, Alan W. Pense, Robert B. Gordon
出版情報: New York : McGraw-Hill, c1977  xii, 500 p. ; 24 cm
シリーズ名: McGraw-Hill series in materials science and engineering
所蔵情報: loading…
8.

図書
図書
8. Materials science for engineers
[by] Lawrence H. Van Vlack
出版情報: Reading, Mass. : Addison-Wesley Pub. Co., [1970]  xii, 545 p. ; 25 cm
シリーズ名: Addison-Wesley series in metallurgy and materials
所蔵情報: loading…
9.

図書
図書
9. Deformation-mechanism maps : the plasticity and creep of metals and ceramics (: pbk)
by H.J. Frost and M.F. Ashby
出版情報: Oxford [Oxfordshire] ; New York : Pergamon Press, 1982  ix, 166 p. ; 31 cm
所蔵情報: loading…
10.

図書
図書
10. Electronic, magnetic, and thermal properties of solid materials (pbk.)
Klaus Schröder
出版情報: New York : Marcel Dekker, c1978  viii, 585 p. ; 24 cm
シリーズ名: Electrical engineering and electronics ; 5
所蔵情報: loading…
文献の複写および貸借の依頼を行う
 文献複写・貸借依頼